提交 52983041 编写于 作者: R Russell King 提交者: Gregory CLEMENT

arm64: dts: marvell: mcbin: add sdhci

Add sdhci support for MACCHIATOBin boards.  This uses the AP806 SDHCI
for eMMC and CP110 master for the SD card slot.
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
上级 b7a3768b
......@@ -95,6 +95,21 @@
status = "okay";
};
&ap_sdhci0 {
bus-width = <8>;
/*
* Not stable in HS modes - phy needs "more calibration", so add
* the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
*/
marvell,xenon-phy-slow-mode;
no-1-8-v;
no-sd;
no-sdio;
non-removable;
status = "okay";
vqmmc-supply = <&v_vddo_h>;
};
&cpm_i2c0 {
clock-frequency = <100000>;
status = "okay";
......@@ -105,6 +120,14 @@
status = "okay";
};
&cpm_sdhci0 {
/* U6 */
broken-cd;
bus-width = <4>;
status = "okay";
vqmmc-supply = <&v_3_3>;
};
&cpm_usb3_0 {
/* J38? - USB2.0 only */
status = "okay";
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册