[media] rtl28xxu: use masked reg write where possible

Use masked register write inside rtl2832u_power_ctrl().
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/usb/dvb-usb-v2/rtl28xxu.c

@@ -1041,67 +1041,34 @@ static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff)
 static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff)
 {
 	int ret;
-	u8 val;
 
 	dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
 
 	if (onoff) {
-		/* set output values */
-		ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &val);
-		if (ret)
-			goto err;
-
-		val |= 0x08;
-		val &= 0xef;
-
-		ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, val);
-		if (ret)
-			goto err;
-
-		/* demod_ctl_1 */
-		ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL1, &val);
-		if (ret)
-			goto err;
-
-		val &= 0xef;
-
-		ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL1, val);
-		if (ret)
-			goto err;
-
-		/* demod control */
-		/* PLL enable */
-		ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val);
+		/* GPIO3=1, GPIO4=0 */
+		ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x08, 0x18);
 		if (ret)
 			goto err;
 
-		/* bit 7 to 1 */
-		val |= 0x80;
-
-		ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
+		/* suspend? */
+		ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL1, 0x00, 0x10);
 		if (ret)
 			goto err;
 
-		ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val);
+		/* enable PLL */
+		ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x80, 0x80);
 		if (ret)
 			goto err;
 
-		val |= 0x20;
-
-		ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
+		/* disable reset */
+		ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x20, 0x20);
 		if (ret)
 			goto err;
 
 		mdelay(5);
 
-		/*enable ADC_Q and ADC_I */
-		ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val);
-		if (ret)
-			goto err;
-
-		val |= 0x48;
-
-		ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
+		/* enable ADC */
+		ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x48, 0x48);
 		if (ret)
 			goto err;
 
@@ -1114,25 +1081,18 @@ static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff)
 		if (ret)
 			goto err;
 	} else {
-		/* set output values */
-		ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &val);
-		if (ret)
-				goto err;
-
-		val |= 0x10;
-
-		ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, val);
+		/* GPIO4=1 */
+		ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x10, 0x10);
 		if (ret)
 			goto err;
 
-		/* demod control */
-		ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val);
+		/* disable ADC */
+		ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x00, 0x48);
 		if (ret)
 			goto err;
 
-		val &= 0x37;
-
-		ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
+		/* disable PLL */
+		ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x00, 0x80);
 		if (ret)
 			goto err;