drm/i915: shuffle panel code

Somehow a few functions have been dropped in the middle of backlight
code. Move them around. No functional changes.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/intel_panel.c

@@ -42,6 +42,59 @@ intel_fixed_panel_mode(const struct drm_display_mode *fixed_mode,
 	drm_mode_set_crtcinfo(adjusted_mode, 0);
 }
 
+/**
+ * intel_find_panel_downclock - find the reduced downclock for LVDS in EDID
+ * @dev: drm device
+ * @fixed_mode : panel native mode
+ * @connector: LVDS/eDP connector
+ *
+ * Return downclock_avail
+ * Find the reduced downclock for LVDS/eDP in EDID.
+ */
+struct drm_display_mode *
+intel_find_panel_downclock(struct drm_device *dev,
+			struct drm_display_mode *fixed_mode,
+			struct drm_connector *connector)
+{
+	struct drm_display_mode *scan, *tmp_mode;
+	int temp_downclock;
+
+	temp_downclock = fixed_mode->clock;
+	tmp_mode = NULL;
+
+	list_for_each_entry(scan, &connector->probed_modes, head) {
+		/*
+		 * If one mode has the same resolution with the fixed_panel
+		 * mode while they have the different refresh rate, it means
+		 * that the reduced downclock is found. In such
+		 * case we can set the different FPx0/1 to dynamically select
+		 * between low and high frequency.
+		 */
+		if (scan->hdisplay == fixed_mode->hdisplay &&
+		    scan->hsync_start == fixed_mode->hsync_start &&
+		    scan->hsync_end == fixed_mode->hsync_end &&
+		    scan->htotal == fixed_mode->htotal &&
+		    scan->vdisplay == fixed_mode->vdisplay &&
+		    scan->vsync_start == fixed_mode->vsync_start &&
+		    scan->vsync_end == fixed_mode->vsync_end &&
+		    scan->vtotal == fixed_mode->vtotal) {
+			if (scan->clock < temp_downclock) {
+				/*
+				 * The downclock is already found. But we
+				 * expect to find the lower downclock.
+				 */
+				temp_downclock = scan->clock;
+				tmp_mode = scan;
+			}
+		}
+	}
+
+	if (temp_downclock < fixed_mode->clock)
+		return drm_mode_duplicate(dev, tmp_mode);
+	else
+		return NULL;
+}
+
 /* adjusted_mode has been preset to be the panel's fixed mode */
 void
 intel_pch_panel_fitting(struct intel_crtc *intel_crtc,
@@ -323,6 +376,28 @@ void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc,
 	pipe_config->gmch_pfit.lvds_border_bits = border;
 }
 
+enum drm_connector_status
+intel_panel_detect(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	/* Assume that the BIOS does not lie through the OpRegion... */
+	if (!i915.panel_ignore_lid && dev_priv->opregion.lid_state) {
+		return ioread32(dev_priv->opregion.lid_state) & 0x1 ?
+			connector_status_connected :
+			connector_status_disconnected;
+	}
+
+	switch (i915.panel_ignore_lid) {
+	case -2:
+		return connector_status_connected;
+	case -1:
+		return connector_status_disconnected;
+	default:
+		return connector_status_unknown;
+	}
+}
+
 static u32 intel_panel_compute_brightness(struct intel_connector *connector,
 					  u32 val)
 {
@@ -795,28 +870,6 @@ void intel_panel_enable_backlight(struct intel_connector *connector)
 	spin_unlock_irqrestore(&dev_priv->backlight_lock, flags);
 }
 
-enum drm_connector_status
-intel_panel_detect(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
-	/* Assume that the BIOS does not lie through the OpRegion... */
-	if (!i915.panel_ignore_lid && dev_priv->opregion.lid_state) {
-		return ioread32(dev_priv->opregion.lid_state) & 0x1 ?
-			connector_status_connected :
-			connector_status_disconnected;
-	}
-
-	switch (i915.panel_ignore_lid) {
-	case -2:
-		return connector_status_connected;
-	case -1:
-		return connector_status_disconnected;
-	default:
-		return connector_status_unknown;
-	}
-}
-
 #if IS_ENABLED(CONFIG_BACKLIGHT_CLASS_DEVICE)
 static int intel_backlight_device_update_status(struct backlight_device *bd)
 {
@@ -1103,59 +1156,6 @@ void intel_panel_destroy_backlight(struct drm_connector *connector)
 	intel_backlight_device_unregister(intel_connector);
 }
 
-/**
- * intel_find_panel_downclock - find the reduced downclock for LVDS in EDID
- * @dev: drm device
- * @fixed_mode : panel native mode
- * @connector: LVDS/eDP connector
- *
- * Return downclock_avail
- * Find the reduced downclock for LVDS/eDP in EDID.
- */
-struct drm_display_mode *
-intel_find_panel_downclock(struct drm_device *dev,
-			struct drm_display_mode *fixed_mode,
-			struct drm_connector *connector)
-{
-	struct drm_display_mode *scan, *tmp_mode;
-	int temp_downclock;
-
-	temp_downclock = fixed_mode->clock;
-	tmp_mode = NULL;
-
-	list_for_each_entry(scan, &connector->probed_modes, head) {
-		/*
-		 * If one mode has the same resolution with the fixed_panel
-		 * mode while they have the different refresh rate, it means
-		 * that the reduced downclock is found. In such
-		 * case we can set the different FPx0/1 to dynamically select
-		 * between low and high frequency.
-		 */
-		if (scan->hdisplay == fixed_mode->hdisplay &&
-		    scan->hsync_start == fixed_mode->hsync_start &&
-		    scan->hsync_end == fixed_mode->hsync_end &&
-		    scan->htotal == fixed_mode->htotal &&
-		    scan->vdisplay == fixed_mode->vdisplay &&
-		    scan->vsync_start == fixed_mode->vsync_start &&
-		    scan->vsync_end == fixed_mode->vsync_end &&
-		    scan->vtotal == fixed_mode->vtotal) {
-			if (scan->clock < temp_downclock) {
-				/*
-				 * The downclock is already found. But we
-				 * expect to find the lower downclock.
-				 */
-				temp_downclock = scan->clock;
-				tmp_mode = scan;
-			}
-		}
-	}
-
-	if (temp_downclock < fixed_mode->clock)
-		return drm_mode_duplicate(dev, tmp_mode);
-	else
-		return NULL;
-}
-
 /* Set up chip specific backlight functions */
 void intel_panel_init_backlight_funcs(struct drm_device *dev)
 {