Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 52295666 编写于 作者: A Andrew Lunn 提交者： David S. Miller
浏览文件
操作

net: phy: marvell: Uniform page names 

Bring all the page names together, remove the repeats, and make them
uniform.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 53798328
隐藏空白更改
内联 并排
Showing with 46 addition and 48 deletion
drivers/net/phy/marvell.c
浏览文件 @ 52295666
......@@ -41,6 +41,12 @@
#include <linux/uaccess.h>
#define MII_MARVELL_PHY_PAGE 22
#define MII_MARVELL_COPPER_PAGE 0x00
#define MII_MARVELL_FIBER_PAGE 0x01
#define MII_MARVELL_MSCR_PAGE 0x02
#define MII_MARVELL_LED_PAGE 0x03
#define MII_MARVELL_MISC_TEST_PAGE 0x06
#define MII_MARVELL_WOL_PAGE 0x11
#define MII_M1011_IEVENT 0x13
#define MII_M1011_IEVENT_CLEAR 0x0000
......@@ -82,16 +88,11 @@
#define MII_M1111_HWCFG_FIBER_COPPER_AUTO 0x8000
#define MII_M1111_HWCFG_FIBER_COPPER_RES 0x2000
#define MII_M1111_COPPER 0
#define MII_M1111_FIBER 1
#define MII_88E1121_PHY_MSCR_PAGE 2
#define MII_88E1121_PHY_MSCR_REG 21
#define MII_88E1121_PHY_MSCR_RX_DELAY BIT(5)
#define MII_88E1121_PHY_MSCR_TX_DELAY BIT(4)
#define MII_88E1121_PHY_MSCR_DELAY_MASK (~(0x3 << 4))
#define MII_88E1121_MISC_TEST_PAGE 6
#define MII_88E1121_MISC_TEST 0x1a
#define MII_88E1510_MISC_TEST_TEMP_THRESHOLD_MASK 0x1f00
#define MII_88E1510_MISC_TEST_TEMP_THRESHOLD_SHIFT 8
......@@ -112,7 +113,6 @@
#define MII_88E1318S_PHY_CSIER_WOL_EIE BIT(7)
/* LED Timer Control Register */
#define MII_88E1318S_PHY_LED_PAGE 0x03
#define MII_88E1318S_PHY_LED_TCR 0x12
#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15)
#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7)
......@@ -123,13 +123,11 @@
#define MII_88E1318S_PHY_MAGIC_PACKET_WORD1 0x18
#define MII_88E1318S_PHY_MAGIC_PACKET_WORD0 0x19
#define MII_88E1318S_PHY_WOL_PAGE 0x11
#define MII_88E1318S_PHY_WOL_CTRL 0x10
#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS BIT(12)
#define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE BIT(14)
#define MII_88E1121_PHY_LED_CTRL 16
#define MII_88E1121_PHY_LED_PAGE 3
#define MII_88E1121_PHY_LED_DEF 0x0030
#define MII_M1011_PHY_STATUS 0x11
......@@ -465,7 +463,7 @@ static int m88e1121_config_aneg(struct phy_device *phydev)
{
int err, oldpage, mscr;
oldpage = marvell_get_set_page(phydev, MII_88E1121_PHY_MSCR_PAGE);
oldpage = marvell_get_set_page(phydev, MII_MARVELL_MSCR_PAGE);
if (oldpage < 0)
return oldpage;
......@@ -504,7 +502,7 @@ static int m88e1318_config_aneg(struct phy_device *phydev)
{
int err, oldpage, mscr;
oldpage = marvell_get_set_page(phydev, MII_88E1121_PHY_MSCR_PAGE);
oldpage = marvell_get_set_page(phydev, MII_MARVELL_MSCR_PAGE);
if (oldpage < 0)
return oldpage;
......@@ -615,7 +613,7 @@ static int m88e1510_config_aneg(struct phy_device *phydev)
{
int err;
err = marvell_set_page(phydev, MII_M1111_COPPER);
err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
if (err < 0)
goto error;
......@@ -625,7 +623,7 @@ static int m88e1510_config_aneg(struct phy_device *phydev)
goto error;
/* Then the fiber link */
err = marvell_set_page(phydev, MII_M1111_FIBER);
err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE);
if (err < 0)
goto error;
......@@ -633,10 +631,10 @@ static int m88e1510_config_aneg(struct phy_device *phydev)
if (err < 0)
goto error;
return marvell_set_page(phydev, MII_M1111_COPPER);
return marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
error:
marvell_set_page(phydev, MII_M1111_COPPER);
marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
return err;
}
......@@ -659,7 +657,7 @@ static int m88e1116r_config_init(struct phy_device *phydev)
mdelay(500);
err = marvell_set_page(phydev, MII_M1111_COPPER);
err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
if (err < 0)
return err;
......@@ -671,7 +669,7 @@ static int m88e1116r_config_init(struct phy_device *phydev)
if (err < 0)
return err;
err = marvell_set_page(phydev, MII_88E1121_PHY_MSCR_PAGE);
err = marvell_set_page(phydev, MII_MARVELL_MSCR_PAGE);
if (err < 0)
return err;
temp = phy_read(phydev, MII_M1116R_CONTROL_REG_MAC);
......@@ -680,7 +678,7 @@ static int m88e1116r_config_init(struct phy_device *phydev)
err = phy_write(phydev, MII_M1116R_CONTROL_REG_MAC, temp);
if (err < 0)
return err;
err = marvell_set_page(phydev, MII_M1111_COPPER);
err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
if (err < 0)
return err;
......@@ -769,7 +767,7 @@ static int m88e1111_config_init_sgmii(struct phy_device *phydev)
return err;
/* make sure copper is selected */
return marvell_set_page(phydev, MII_M1111_COPPER);
return marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
}
static int m88e1111_config_init_rtbi(struct phy_device *phydev)
......@@ -852,7 +850,7 @@ static int m88e1121_config_init(struct phy_device *phydev)
{
int err, oldpage;
oldpage = marvell_get_set_page(phydev, MII_88E1121_PHY_LED_PAGE);
oldpage = marvell_get_set_page(phydev, MII_MARVELL_LED_PAGE);
if (oldpage < 0)
return oldpage;
......@@ -895,7 +893,7 @@ static int m88e1510_config_init(struct phy_device *phydev)
return err;
/* Reset page selection */
err = marvell_set_page(phydev, MII_M1111_COPPER);
err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
if (err < 0)
return err;
}
......@@ -925,7 +923,7 @@ static int m88e1118_config_init(struct phy_device *phydev)
int err;
/* Change address */
err = marvell_set_page(phydev, MII_88E1121_PHY_MSCR_PAGE);
err = marvell_set_page(phydev, MII_MARVELL_MSCR_PAGE);
if (err < 0)
return err;
......@@ -935,7 +933,7 @@ static int m88e1118_config_init(struct phy_device *phydev)
return err;
/* Change address */
err = marvell_set_page(phydev, MII_88E1318S_PHY_LED_PAGE);
err = marvell_set_page(phydev, MII_MARVELL_LED_PAGE);
if (err < 0)
return err;
......@@ -952,7 +950,7 @@ static int m88e1118_config_init(struct phy_device *phydev)
return err;
/* Reset address */
err = marvell_set_page(phydev, MII_M1111_COPPER);
err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
if (err < 0)
return err;
......@@ -964,7 +962,7 @@ static int m88e1149_config_init(struct phy_device *phydev)
int err;
/* Change address */
err = marvell_set_page(phydev, MII_88E1121_PHY_MSCR_PAGE);
err = marvell_set_page(phydev, MII_MARVELL_MSCR_PAGE);
if (err < 0)
return err;
......@@ -978,7 +976,7 @@ static int m88e1149_config_init(struct phy_device *phydev)
return err;
/* Reset address */
err = marvell_set_page(phydev, MII_M1111_COPPER);
err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
if (err < 0)
return err;
......@@ -1248,7 +1246,7 @@ static int marvell_read_status_page(struct phy_device *phydev, int page)
/* Detect and update the link, but return if there
* was an error
*/
if (page == MII_M1111_FIBER)
if (page == MII_MARVELL_FIBER_PAGE)
fiber = 1;
else
fiber = 0;
......@@ -1281,11 +1279,11 @@ static int marvell_read_status(struct phy_device *phydev)
/* Check the fiber mode first */
if (phydev->supported & SUPPORTED_FIBRE &&
phydev->interface != PHY_INTERFACE_MODE_SGMII) {
err = marvell_set_page(phydev, MII_M1111_FIBER);
err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE);
if (err < 0)
goto error;
err = marvell_read_status_page(phydev, MII_M1111_FIBER);
err = marvell_read_status_page(phydev, MII_MARVELL_FIBER_PAGE);
if (err < 0)
goto error;
......@@ -1300,15 +1298,15 @@ static int marvell_read_status(struct phy_device *phydev)
return 0;
/* If fiber link is down, check and save copper mode state */
err = marvell_set_page(phydev, MII_M1111_COPPER);
err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
if (err < 0)
goto error;
}
return marvell_read_status_page(phydev, MII_M1111_COPPER);
return marvell_read_status_page(phydev, MII_MARVELL_COPPER_PAGE);
error:
marvell_set_page(phydev, MII_M1111_COPPER);
marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
return err;
}
......@@ -1323,7 +1321,7 @@ static int marvell_suspend(struct phy_device *phydev)
/* Suspend the fiber mode first */
if (!(phydev->supported & SUPPORTED_FIBRE)) {
err = marvell_set_page(phydev, MII_M1111_FIBER);
err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE);
if (err < 0)
goto error;
......@@ -1333,7 +1331,7 @@ static int marvell_suspend(struct phy_device *phydev)
goto error;
/* Then, the copper link */
err = marvell_set_page(phydev, MII_M1111_COPPER);
err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
if (err < 0)
goto error;
}
......@@ -1342,7 +1340,7 @@ static int marvell_suspend(struct phy_device *phydev)
return genphy_suspend(phydev);
error:
marvell_set_page(phydev, MII_M1111_COPPER);
marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
return err;
}
......@@ -1357,7 +1355,7 @@ static int marvell_resume(struct phy_device *phydev)
/* Resume the fiber mode first */
if (!(phydev->supported & SUPPORTED_FIBRE)) {
err = marvell_set_page(phydev, MII_M1111_FIBER);
err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE);
if (err < 0)
goto error;
......@@ -1367,7 +1365,7 @@ static int marvell_resume(struct phy_device *phydev)
goto error;
/* Then, the copper link */
err = marvell_set_page(phydev, MII_M1111_COPPER);
err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
if (err < 0)
goto error;
}
......@@ -1376,7 +1374,7 @@ static int marvell_resume(struct phy_device *phydev)
return genphy_resume(phydev);
error:
marvell_set_page(phydev, MII_M1111_COPPER);
marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
return err;
}
......@@ -1405,14 +1403,14 @@ static void m88e1318_get_wol(struct phy_device *phydev,
wol->supported = WAKE_MAGIC;
wol->wolopts = 0;
if (marvell_set_page(phydev, MII_88E1318S_PHY_WOL_PAGE) < 0)
if (marvell_set_page(phydev, MII_MARVELL_WOL_PAGE) < 0)
return;
if (phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL) &
MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE)
wol->wolopts |= WAKE_MAGIC;
if (marvell_set_page(phydev, MII_M1111_COPPER) < 0)
if (marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE) < 0)
return;
}
......@@ -1425,7 +1423,7 @@ static int m88e1318_set_wol(struct phy_device *phydev,
if (wol->wolopts & WAKE_MAGIC) {
/* Explicitly switch to page 0x00, just to be sure */
err = marvell_set_page(phydev, MII_M1111_COPPER);
err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
if (err < 0)
return err;
......@@ -1436,7 +1434,7 @@ static int m88e1318_set_wol(struct phy_device *phydev,
if (err < 0)
return err;
err = marvell_set_page(phydev, MII_88E1318S_PHY_LED_PAGE);
err = marvell_set_page(phydev, MII_MARVELL_LED_PAGE);
if (err < 0)
return err;
......@@ -1449,7 +1447,7 @@ static int m88e1318_set_wol(struct phy_device *phydev,
if (err < 0)
return err;
err = marvell_set_page(phydev, MII_88E1318S_PHY_WOL_PAGE);
err = marvell_set_page(phydev, MII_MARVELL_WOL_PAGE);
if (err < 0)
return err;
......@@ -1478,7 +1476,7 @@ static int m88e1318_set_wol(struct phy_device *phydev,
if (err < 0)
return err;
} else {
err = marvell_set_page(phydev, MII_88E1318S_PHY_WOL_PAGE);
err = marvell_set_page(phydev, MII_MARVELL_WOL_PAGE);
if (err < 0)
return err;
......@@ -1564,7 +1562,7 @@ static int m88e1121_get_temp(struct phy_device *phydev, long *temp)
mutex_lock(&phydev->lock);
oldpage = marvell_get_set_page(phydev, MII_88E1121_MISC_TEST_PAGE);
oldpage = marvell_get_set_page(phydev, MII_MARVELL_MISC_TEST_PAGE);
if (oldpage < 0) {
mutex_unlock(&phydev->lock);
return oldpage;
......@@ -1682,7 +1680,7 @@ static int m88e1510_get_temp(struct phy_device *phydev, long *temp)
mutex_lock(&phydev->lock);
oldpage = marvell_get_set_page(phydev, MII_88E1121_MISC_TEST_PAGE);
oldpage = marvell_get_set_page(phydev, MII_MARVELL_MISC_TEST_PAGE);
if (oldpage < 0) {
mutex_unlock(&phydev->lock);
return oldpage;
......@@ -1710,7 +1708,7 @@ int m88e1510_get_temp_critical(struct phy_device *phydev, long *temp)
mutex_lock(&phydev->lock);
oldpage = marvell_get_set_page(phydev, MII_88E1121_MISC_TEST_PAGE);
oldpage = marvell_get_set_page(phydev, MII_MARVELL_MISC_TEST_PAGE);
if (oldpage < 0) {
mutex_unlock(&phydev->lock);
return oldpage;
......@@ -1739,7 +1737,7 @@ int m88e1510_set_temp_critical(struct phy_device *phydev, long temp)
mutex_lock(&phydev->lock);
oldpage = marvell_get_set_page(phydev, MII_88E1121_MISC_TEST_PAGE);
oldpage = marvell_get_set_page(phydev, MII_MARVELL_MISC_TEST_PAGE);
if (oldpage < 0) {
mutex_unlock(&phydev->lock);
return oldpage;
......@@ -1771,7 +1769,7 @@ int m88e1510_get_temp_alarm(struct phy_device *phydev, long *alarm)
mutex_lock(&phydev->lock);
oldpage = marvell_get_set_page(phydev, MII_88E1121_MISC_TEST_PAGE);
oldpage = marvell_get_set_page(phydev, MII_MARVELL_MISC_TEST_PAGE);
if (oldpage < 0) {
mutex_unlock(&phydev->lock);
return oldpage;
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或