提交 51b66a6c 编写于 作者: P Pratyush Anand 提交者: Viresh Kumar

PCI: spear: Add PCIe driver for ST Microelectronics SPEAr13xx

ARM based ST Microelectronics's SPEAr1310 and SPEAr1340 SOCs have onchip
designware PCIe controller. To make that usable, this patch adds a wrapper
driver based on existing designware driver.

Adds bindings for this new driver and update MAINTAINERS as well.

Cc: linux-pci@vger.kernel.org
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NPratyush Anand <pratyush.anand@st.com>
Signed-off-by: NMohit Kumar <mohit.kumar@st.com>
[viresh: fixed logs/cclist/checkpatch warnings, broken into smaller patches]
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
上级 4c834452
SPEAr13XX PCIe DT detail:
================================
SPEAr13XX uses synopsis designware PCIe controller and ST MiPHY as phy
controller.
Required properties:
- compatible : should be "st,spear1340-pcie", "snps,dw-pcie".
- phys : phandle to phy node associated with pcie controller
- phy-names : must be "pcie-phy"
- All other definitions as per generic PCI bindings
Optional properties:
- st,pcie-is-gen1 indicates that forced gen1 initialization is needed.
......@@ -6820,6 +6820,12 @@ S: Maintained
F: Documentation/devicetree/bindings/pci/host-generic-pci.txt
F: drivers/pci/host/pci-host-generic.c
PCIE DRIVER FOR ST SPEAR13XX
M: Mohit Kumar <mohit.kumar@st.com>
L: linux-pci@vger.kernel.org
S: Maintained
F: drivers/pci/host/*spear*
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: linux-pcmcia@lists.infradead.org
......
......@@ -46,4 +46,12 @@ config PCI_HOST_GENERIC
Say Y here if you want to support a simple generic PCI host
controller, such as the one emulated by kvmtool.
config PCIE_SPEAR13XX
tristate "STMicroelectronics SPEAr PCIe controller"
depends on ARCH_SPEAR13XX
select PCIEPORTBUS
select PCIE_DW
help
Say Y here if you want PCIe support on SPEAr13XX SoCs.
endmenu
......@@ -6,3 +6,4 @@ obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
obj-$(CONFIG_PCI_RCAR_GEN2_PCIE) += pcie-rcar.o
obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
/*
* PCIe host controller driver for ST Microelectronics SPEAr13xx SoCs
*
* SPEAr13xx PCIe Glue Layer Source Code
*
* Copyright (C) 2010-2014 ST Microelectronics
* Pratyush Anand <pratyush.anand@st.com>
* Mohit Kumar <mohit.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/pci.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/resource.h>
#include "pcie-designware.h"
struct spear13xx_pcie {
void __iomem *app_base;
struct phy *phy;
struct clk *clk;
struct pcie_port pp;
bool is_gen1;
};
struct pcie_app_reg {
u32 app_ctrl_0; /* cr0 */
u32 app_ctrl_1; /* cr1 */
u32 app_status_0; /* cr2 */
u32 app_status_1; /* cr3 */
u32 msg_status; /* cr4 */
u32 msg_payload; /* cr5 */
u32 int_sts; /* cr6 */
u32 int_clr; /* cr7 */
u32 int_mask; /* cr8 */
u32 mst_bmisc; /* cr9 */
u32 phy_ctrl; /* cr10 */
u32 phy_status; /* cr11 */
u32 cxpl_debug_info_0; /* cr12 */
u32 cxpl_debug_info_1; /* cr13 */
u32 ven_msg_ctrl_0; /* cr14 */
u32 ven_msg_ctrl_1; /* cr15 */
u32 ven_msg_data_0; /* cr16 */
u32 ven_msg_data_1; /* cr17 */
u32 ven_msi_0; /* cr18 */
u32 ven_msi_1; /* cr19 */
u32 mst_rmisc; /* cr20 */
};
/* CR0 ID */
#define RX_LANE_FLIP_EN_ID 0
#define TX_LANE_FLIP_EN_ID 1
#define SYS_AUX_PWR_DET_ID 2
#define APP_LTSSM_ENABLE_ID 3
#define SYS_ATTEN_BUTTON_PRESSED_ID 4
#define SYS_MRL_SENSOR_STATE_ID 5
#define SYS_PWR_FAULT_DET_ID 6
#define SYS_MRL_SENSOR_CHGED_ID 7
#define SYS_PRE_DET_CHGED_ID 8
#define SYS_CMD_CPLED_INT_ID 9
#define APP_INIT_RST_0_ID 11
#define APP_REQ_ENTR_L1_ID 12
#define APP_READY_ENTR_L23_ID 13
#define APP_REQ_EXIT_L1_ID 14
#define DEVICE_TYPE_EP (0 << 25)
#define DEVICE_TYPE_LEP (1 << 25)
#define DEVICE_TYPE_RC (4 << 25)
#define SYS_INT_ID 29
#define MISCTRL_EN_ID 30
#define REG_TRANSLATION_ENABLE 31
/* CR1 ID */
#define APPS_PM_XMT_TURNOFF_ID 2
#define APPS_PM_XMT_PME_ID 5
/* CR3 ID */
#define XMLH_LTSSM_STATE_DETECT_QUIET 0x00
#define XMLH_LTSSM_STATE_DETECT_ACT 0x01
#define XMLH_LTSSM_STATE_POLL_ACTIVE 0x02
#define XMLH_LTSSM_STATE_POLL_COMPLIANCE 0x03
#define XMLH_LTSSM_STATE_POLL_CONFIG 0x04
#define XMLH_LTSSM_STATE_PRE_DETECT_QUIET 0x05
#define XMLH_LTSSM_STATE_DETECT_WAIT 0x06
#define XMLH_LTSSM_STATE_CFG_LINKWD_START 0x07
#define XMLH_LTSSM_STATE_CFG_LINKWD_ACEPT 0x08
#define XMLH_LTSSM_STATE_CFG_LANENUM_WAIT 0x09
#define XMLH_LTSSM_STATE_CFG_LANENUM_ACEPT 0x0A
#define XMLH_LTSSM_STATE_CFG_COMPLETE 0x0B
#define XMLH_LTSSM_STATE_CFG_IDLE 0x0C
#define XMLH_LTSSM_STATE_RCVRY_LOCK 0x0D
#define XMLH_LTSSM_STATE_RCVRY_SPEED 0x0E
#define XMLH_LTSSM_STATE_RCVRY_RCVRCFG 0x0F
#define XMLH_LTSSM_STATE_RCVRY_IDLE 0x10
#define XMLH_LTSSM_STATE_L0 0x11
#define XMLH_LTSSM_STATE_L0S 0x12
#define XMLH_LTSSM_STATE_L123_SEND_EIDLE 0x13
#define XMLH_LTSSM_STATE_L1_IDLE 0x14
#define XMLH_LTSSM_STATE_L2_IDLE 0x15
#define XMLH_LTSSM_STATE_L2_WAKE 0x16
#define XMLH_LTSSM_STATE_DISABLED_ENTRY 0x17
#define XMLH_LTSSM_STATE_DISABLED_IDLE 0x18
#define XMLH_LTSSM_STATE_DISABLED 0x19
#define XMLH_LTSSM_STATE_LPBK_ENTRY 0x1A
#define XMLH_LTSSM_STATE_LPBK_ACTIVE 0x1B
#define XMLH_LTSSM_STATE_LPBK_EXIT 0x1C
#define XMLH_LTSSM_STATE_LPBK_EXIT_TIMEOUT 0x1D
#define XMLH_LTSSM_STATE_HOT_RESET_ENTRY 0x1E
#define XMLH_LTSSM_STATE_HOT_RESET 0x1F
#define XMLH_LTSSM_STATE_MASK 0x3F
#define XMLH_LINK_UP (1 << 6)
/* CR4 ID */
#define CFG_MSI_EN_ID 18
/* CR6 */
#define INTA_CTRL_INT (1 << 7)
#define INTB_CTRL_INT (1 << 8)
#define INTC_CTRL_INT (1 << 9)
#define INTD_CTRL_INT (1 << 10)
#define MSI_CTRL_INT (1 << 26)
/* CR19 ID */
#define VEN_MSI_REQ_ID 11
#define VEN_MSI_FUN_NUM_ID 8
#define VEN_MSI_TC_ID 5
#define VEN_MSI_VECTOR_ID 0
#define VEN_MSI_REQ_EN ((u32)0x1 << VEN_MSI_REQ_ID)
#define VEN_MSI_FUN_NUM_MASK ((u32)0x7 << VEN_MSI_FUN_NUM_ID)
#define VEN_MSI_TC_MASK ((u32)0x7 << VEN_MSI_TC_ID)
#define VEN_MSI_VECTOR_MASK ((u32)0x1F << VEN_MSI_VECTOR_ID)
#define EXP_CAP_ID_OFFSET 0x70
#define to_spear13xx_pcie(x) container_of(x, struct spear13xx_pcie, pp)
static int spear13xx_pcie_establish_link(struct pcie_port *pp)
{
u32 val;
int count = 0;
struct spear13xx_pcie *spear13xx_pcie = to_spear13xx_pcie(pp);
struct pcie_app_reg *app_reg = spear13xx_pcie->app_base;
u32 exp_cap_off = EXP_CAP_ID_OFFSET;
if (dw_pcie_link_up(pp)) {
dev_err(pp->dev, "link already up\n");
return 0;
}
dw_pcie_setup_rc(pp);
/*
* this controller support only 128 bytes read size, however its
* default value in capability register is 512 bytes. So force
* it to 128 here.
*/
dw_pcie_cfg_read(pp->dbi_base, exp_cap_off + PCI_EXP_DEVCTL, 4, &val);
val &= ~PCI_EXP_DEVCTL_READRQ;
dw_pcie_cfg_write(pp->dbi_base, exp_cap_off + PCI_EXP_DEVCTL, 4, val);
dw_pcie_cfg_write(pp->dbi_base, PCI_VENDOR_ID, 2, 0x104A);
dw_pcie_cfg_write(pp->dbi_base, PCI_DEVICE_ID, 2, 0xCD80);
/*
* if is_gen1 is set then handle it, so that some buggy card
* also works
*/
if (spear13xx_pcie->is_gen1) {
dw_pcie_cfg_read(pp->dbi_base, exp_cap_off + PCI_EXP_LNKCAP, 4,
&val);
if ((val & PCI_EXP_LNKCAP_SLS) != PCI_EXP_LNKCAP_SLS_2_5GB) {
val &= ~((u32)PCI_EXP_LNKCAP_SLS);
val |= PCI_EXP_LNKCAP_SLS_2_5GB;
dw_pcie_cfg_write(pp->dbi_base, exp_cap_off +
PCI_EXP_LNKCAP, 4, val);
}
dw_pcie_cfg_read(pp->dbi_base, exp_cap_off + PCI_EXP_LNKCTL2, 4,
&val);
if ((val & PCI_EXP_LNKCAP_SLS) != PCI_EXP_LNKCAP_SLS_2_5GB) {
val &= ~((u32)PCI_EXP_LNKCAP_SLS);
val |= PCI_EXP_LNKCAP_SLS_2_5GB;
dw_pcie_cfg_write(pp->dbi_base, exp_cap_off +
PCI_EXP_LNKCTL2, 4, val);
}
}
/* enable ltssm */
writel(DEVICE_TYPE_RC | (1 << MISCTRL_EN_ID)
| (1 << APP_LTSSM_ENABLE_ID)
| ((u32)1 << REG_TRANSLATION_ENABLE),
&app_reg->app_ctrl_0);
/* check if the link is up or not */
while (!dw_pcie_link_up(pp)) {
mdelay(100);
count++;
if (count == 10) {
dev_err(pp->dev, "link Fail\n");
return -EINVAL;
}
}
dev_info(pp->dev, "link up\n");
return 0;
}
static irqreturn_t spear13xx_pcie_irq_handler(int irq, void *arg)
{
struct pcie_port *pp = arg;
struct spear13xx_pcie *spear13xx_pcie = to_spear13xx_pcie(pp);
struct pcie_app_reg *app_reg = spear13xx_pcie->app_base;
unsigned int status;
status = readl(&app_reg->int_sts);
if (status & MSI_CTRL_INT) {
if (!IS_ENABLED(CONFIG_PCI_MSI))
BUG();
dw_handle_msi_irq(pp);
}
writel(status, &app_reg->int_clr);
return IRQ_HANDLED;
}
static void spear13xx_pcie_enable_interrupts(struct pcie_port *pp)
{
struct spear13xx_pcie *spear13xx_pcie = to_spear13xx_pcie(pp);
struct pcie_app_reg *app_reg = spear13xx_pcie->app_base;
/* Enable MSI interrupt */
if (IS_ENABLED(CONFIG_PCI_MSI)) {
dw_pcie_msi_init(pp);
writel(readl(&app_reg->int_mask) |
MSI_CTRL_INT, &app_reg->int_mask);
}
}
static int spear13xx_pcie_link_up(struct pcie_port *pp)
{
struct spear13xx_pcie *spear13xx_pcie = to_spear13xx_pcie(pp);
struct pcie_app_reg *app_reg = spear13xx_pcie->app_base;
if (readl(&app_reg->app_status_1) & XMLH_LINK_UP)
return 1;
return 0;
}
static void spear13xx_pcie_host_init(struct pcie_port *pp)
{
spear13xx_pcie_establish_link(pp);
spear13xx_pcie_enable_interrupts(pp);
}
static struct pcie_host_ops spear13xx_pcie_host_ops = {
.link_up = spear13xx_pcie_link_up,
.host_init = spear13xx_pcie_host_init,
};
static int add_pcie_port(struct pcie_port *pp, struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
int ret;
pp->irq = platform_get_irq(pdev, 0);
if (!pp->irq) {
dev_err(dev, "failed to get irq\n");
return -ENODEV;
}
ret = devm_request_irq(dev, pp->irq, spear13xx_pcie_irq_handler,
IRQF_SHARED, "spear1340-pcie", pp);
if (ret) {
dev_err(dev, "failed to request irq %d\n", pp->irq);
return ret;
}
pp->root_bus_nr = -1;
pp->ops = &spear13xx_pcie_host_ops;
ret = dw_pcie_host_init(pp);
if (ret) {
dev_err(dev, "failed to initialize host\n");
return ret;
}
return 0;
}
static int __init spear13xx_pcie_probe(struct platform_device *pdev)
{
struct spear13xx_pcie *spear13xx_pcie;
struct pcie_port *pp;
struct device *dev = &pdev->dev;
struct device_node *np = pdev->dev.of_node;
struct resource *dbi_base;
int ret;
spear13xx_pcie = devm_kzalloc(dev, sizeof(*spear13xx_pcie), GFP_KERNEL);
if (!spear13xx_pcie) {
dev_err(dev, "no memory for SPEAr13xx pcie\n");
return -ENOMEM;
}
spear13xx_pcie->phy = devm_phy_get(dev, "pcie-phy");
if (IS_ERR(spear13xx_pcie->phy)) {
ret = PTR_ERR(spear13xx_pcie->phy);
if (ret == -EPROBE_DEFER)
dev_info(dev, "probe deferred\n");
else
dev_err(dev, "couldn't get pcie-phy\n");
return ret;
}
phy_init(spear13xx_pcie->phy);
spear13xx_pcie->clk = devm_clk_get(dev, NULL);
if (IS_ERR(spear13xx_pcie->clk)) {
dev_err(dev, "couldn't get clk for pcie\n");
return PTR_ERR(spear13xx_pcie->clk);
}
ret = clk_prepare_enable(spear13xx_pcie->clk);
if (ret) {
dev_err(dev, "couldn't enable clk for pcie\n");
return ret;
}
pp = &spear13xx_pcie->pp;
pp->dev = dev;
dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pp->dbi_base = devm_ioremap_resource(dev, dbi_base);
if (IS_ERR(pp->dbi_base)) {
dev_err(dev, "couldn't remap dbi base %p\n", dbi_base);
ret = PTR_ERR(pp->dbi_base);
goto fail_clk;
}
spear13xx_pcie->app_base = pp->dbi_base + 0x2000;
if (of_property_read_bool(np, "st,pcie-is-gen1"))
spear13xx_pcie->is_gen1 = true;
ret = add_pcie_port(pp, pdev);
if (ret < 0)
goto fail_clk;
platform_set_drvdata(pdev, spear13xx_pcie);
return 0;
fail_clk:
clk_disable_unprepare(spear13xx_pcie->clk);
return ret;
}
static int __exit spear13xx_pcie_remove(struct platform_device *pdev)
{
struct spear13xx_pcie *spear13xx_pcie = platform_get_drvdata(pdev);
clk_disable_unprepare(spear13xx_pcie->clk);
phy_exit(spear13xx_pcie->phy);
return 0;
}
static const struct of_device_id spear13xx_pcie_of_match[] = {
{ .compatible = "st,spear1340-pcie", },
{},
};
MODULE_DEVICE_TABLE(of, spear13xx_pcie_of_match);
static struct platform_driver spear13xx_pcie_driver = {
.probe = spear13xx_pcie_probe,
.remove = spear13xx_pcie_remove,
.driver = {
.name = "spear-pcie",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(spear13xx_pcie_of_match),
},
};
/* SPEAr13xx PCIe driver does not allow module unload */
static int __init pcie_init(void)
{
return platform_driver_register(&spear13xx_pcie_driver);
}
module_init(pcie_init);
MODULE_DESCRIPTION("ST Microelectronics SPEAr13xx PCIe host controller driver");
MODULE_AUTHOR("Pratyush Anand <pratyush.anand@st.com>");
MODULE_LICENSE("GPL v2");
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册