提交 51502287 编写于 作者: A Artem B. Bityuckiy 提交者: Thomas Gleixner

[MTD] NAND nandsim: Use NAND_SKIP_BBT option

Use the new NAND_SKIP_BBT option instead of defining a fake scan_bbt
handler.
Signed-off-by: NArtem B. Bityuckiy <dedekind@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
上级 167e1770
......@@ -22,7 +22,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*
* $Id: nandsim.c,v 1.7 2004/12/06 11:53:06 dedekind Exp $
* $Id: nandsim.c,v 1.8 2005/03/19 15:33:56 dedekind Exp $
*/
#include <linux/config.h>
......@@ -1483,33 +1483,6 @@ ns_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
}
}
/*
* Having only NAND chip IDs we call nand_scan which detects NAND flash
* parameters and then calls scan_bbt in order to scan/find/build the
* NAND flash bad block table. But since at that moment the NAND flash
* image isn't allocated in the simulator, errors arise. To avoid this
* we redefine the scan_bbt callback and initialize the nandsim structure
* before the flash media scanning.
*/
int ns_scan_bbt(struct mtd_info *mtd)
{
struct nand_chip *chip = (struct nand_chip *)mtd->priv;
struct nandsim *ns = (struct nandsim *)(chip->priv);
int retval;
if (!NS_IS_INITIALIZED(ns))
if ((retval = init_nandsim(mtd)) != 0) {
NS_ERR("scan_bbt: can't initialize the nandsim structure\n");
return retval;
}
if ((retval = nand_default_bbt(mtd)) != 0) {
free_nandsim(ns);
return retval;
}
return 0;
}
/*
* Module initialization function
*/
......@@ -1544,7 +1517,6 @@ int __init ns_init_module(void)
chip->hwcontrol = ns_hwcontrol;
chip->read_byte = ns_nand_read_byte;
chip->dev_ready = ns_device_ready;
chip->scan_bbt = ns_scan_bbt;
chip->write_byte = ns_nand_write_byte;
chip->write_buf = ns_nand_write_buf;
chip->read_buf = ns_nand_read_buf;
......@@ -1552,6 +1524,7 @@ int __init ns_init_module(void)
chip->write_word = ns_nand_write_word;
chip->read_word = ns_nand_read_word;
chip->eccmode = NAND_ECC_SOFT;
chip->options |= NAND_SKIP_BBTSCAN;
/*
* Perform minimum nandsim structure initialization to handle
......@@ -1580,6 +1553,16 @@ int __init ns_init_module(void)
goto error;
}
if ((retval = init_nandsim(nsmtd)) != 0) {
NS_ERR("scan_bbt: can't initialize the nandsim structure\n");
goto error;
}
if ((retval = nand_default_bbt(nsmtd)) != 0) {
free_nandsim(nand);
goto error;
}
/* Register NAND as one big partition */
add_mtd_partitions(nsmtd, &nand->part, 1);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册