Merge remote-tracking branches 'regulator/topic/da9211',...

Merge remote-tracking branches 'regulator/topic/da9211', 'regulator/topic/pfuze100' and 'regulator/topic/tps65218' into regulator-next

Documentation/devicetree/bindings/regulator/da9211.txt

-* Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 Voltage Regulator
+* Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225
+ Voltage Regulator
 
 Required properties:
-- compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213"
-  or "dlg,da9214" or "dlg,da9215"
+- compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213" or "dlg,da9223"
+  or "dlg,da9214" or "dlg,da9224" or "dlg,da9215" or "dlg,da9225"
 - reg: I2C slave address, usually 0x68.
 - interrupts: the interrupt outputs of the controller
 - regulators: A node that houses a sub-node for each regulator within the
@@ -16,7 +17,6 @@ Optional properties:
 - Any optional property defined in regulator.txt
 
 Example 1) DA9211
-
 	pmic: da9211@68 {
 		compatible = "dlg,da9211";
 		reg = <0x68>;
@@ -35,7 +35,6 @@ Example 1) DA9211
 	};
 
 Example 2) DA9212
-
 	pmic: da9212@68 {
 		compatible = "dlg,da9212";
 		reg = <0x68>;
@@ -79,7 +78,25 @@ Example 3) DA9213
 		};
 	};
 
-Example 4) DA9214
+Example 4) DA9223
+	pmic: da9223@68 {
+		compatible = "dlg,da9223";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <3000000>;
+				regulator-max-microamp 	= <6000000>;
+				enable-gpios = <&gpio 27 0>;
+			};
+		};
+	};
+
+Example 5) DA9214
 	pmic: da9214@68 {
 		compatible = "dlg,da9214";
 		reg = <0x68>;
@@ -105,7 +122,33 @@ Example 4) DA9214
 		};
 	};
 
-Example 5) DA9215
+Example 6) DA9224
+	pmic: da9224@68 {
+		compatible = "dlg,da9224";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <3000000>;
+				regulator-max-microamp 	= <6000000>;
+				enable-gpios = <&gpio 27 0>;
+			};
+			BUCKB {
+				regulator-name = "VBUCKB";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <3000000>;
+				regulator-max-microamp 	= <6000000>;
+				enable-gpios = <&gpio 17 0>;
+			};
+		};
+	};
+
+Example 7) DA9215
 	pmic: da9215@68 {
 		compatible = "dlg,da9215";
 		reg = <0x68>;
@@ -131,3 +174,28 @@ Example 5) DA9215
 		};
 	};
 
+Example 8) DA9225
+	pmic: da9225@68 {
+		compatible = "dlg,da9225";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <4000000>;
+				regulator-max-microamp 	= <7000000>;
+				enable-gpios = <&gpio 27 0>;
+			};
+			BUCKB {
+				regulator-name = "VBUCKB";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <4000000>;
+				regulator-max-microamp 	= <7000000>;
+				enable-gpios = <&gpio 17 0>;
+			};
+		};
+	};

Documentation/devicetree/bindings/regulator/pfuze100.txt

@@ -21,7 +21,7 @@ Each regulator is defined using the standard binding for regulators.
 
 Example 1: PFUZE100
 
-	pmic: pfuze100@08 {
+	pmic: pfuze100@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
@@ -122,7 +122,7 @@ Example 1: PFUZE100
 
 Example 2: PFUZE200
 
-	pmic: pfuze200@08 {
+	pmic: pfuze200@8 {
 		compatible = "fsl,pfuze200";
 		reg = <0x08>;
 
@@ -216,7 +216,7 @@ Example 2: PFUZE200
 
 Example 3: PFUZE3000
 
-	pmic: pfuze3000@08 {
+	pmic: pfuze3000@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 

drivers/regulator/Kconfig

@@ -244,7 +244,7 @@ config REGULATOR_DA9210
 	  interface.
 
 config REGULATOR_DA9211
-	tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 regulator"
+	tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 regulator"
 	depends on I2C
 	select REGMAP_I2C
 	help

drivers/regulator/da9211-regulator.c

 /*
  * da9211-regulator.c - Regulator device driver for DA9211/DA9212
- * /DA9213/DA9214/DA9215
+ * /DA9213/DA9223/DA9214/DA9224/DA9215/DA9225
  * Copyright (C) 2015  Dialog Semiconductor Ltd.
  *
  * This library is free software; you can redistribute it and/or
@@ -496,8 +496,11 @@ static const struct i2c_device_id da9211_i2c_id[] = {
 	{"da9211", DA9211},
 	{"da9212", DA9212},
 	{"da9213", DA9213},
+	{"da9223", DA9223},
 	{"da9214", DA9214},
+	{"da9224", DA9224},
 	{"da9215", DA9215},
+	{"da9225", DA9225},
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, da9211_i2c_id);
@@ -507,8 +510,11 @@ static const struct of_device_id da9211_dt_ids[] = {
 	{ .compatible = "dlg,da9211", .data = &da9211_i2c_id[0] },
 	{ .compatible = "dlg,da9212", .data = &da9211_i2c_id[1] },
 	{ .compatible = "dlg,da9213", .data = &da9211_i2c_id[2] },
-	{ .compatible = "dlg,da9214", .data = &da9211_i2c_id[3] },
-	{ .compatible = "dlg,da9215", .data = &da9211_i2c_id[4] },
+	{ .compatible = "dlg,da9223", .data = &da9211_i2c_id[3] },
+	{ .compatible = "dlg,da9214", .data = &da9211_i2c_id[4] },
+	{ .compatible = "dlg,da9224", .data = &da9211_i2c_id[5] },
+	{ .compatible = "dlg,da9215", .data = &da9211_i2c_id[6] },
+	{ .compatible = "dlg,da9225", .data = &da9211_i2c_id[7] },
 	{},
 };
 MODULE_DEVICE_TABLE(of, da9211_dt_ids);
@@ -526,5 +532,5 @@ static struct i2c_driver da9211_regulator_driver = {
 module_i2c_driver(da9211_regulator_driver);
 
 MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>");
-MODULE_DESCRIPTION("DA9211/DA9212/DA9213/DA9214/DA9215 regulator driver");
+MODULE_DESCRIPTION("DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 regulator driver");
 MODULE_LICENSE("GPL");

drivers/regulator/da9211-regulator.h

 /*
  * da9211-regulator.h - Regulator definitions for DA9211/DA9212
- * /DA9213/DA9214/DA9215
+ * /DA9213/DA9223/DA9214/DA9224/DA9215/DA9225
  * Copyright (C) 2015  Dialog Semiconductor Ltd.
  *
  * This program is free software; you can redistribute it and/or

drivers/regulator/tps65218-regulator.c

@@ -154,7 +154,7 @@ static int tps65218_pmic_set_suspend_disable(struct regulator_dev *dev)
 
 	if (!tps->strobes[rid]) {
 		if (rid == TPS65218_DCDC_3)
-			tps->info[rid]->strobe = 3;
+			tps->strobes[rid] = 3;
 		else
 			return -EINVAL;
 	}

include/linux/mfd/tps65218.h

@@ -245,24 +245,6 @@ enum tps65218_irqs {
 	TPS65218_INVALID4_IRQ,
 };
 
-/**
- * struct tps_info - packages regulator constraints
- * @id:			Id of the regulator
- * @name:		Voltage regulator name
- * @min_uV:		minimum micro volts
- * @max_uV:		minimum micro volts
- * @strobe:		sequencing strobe value for the regulator
- *
- * This data is used to check the regualtor voltage limits while setting.
- */
-struct tps_info {
-	int id;
-	const char *name;
-	int min_uV;
-	int max_uV;
-	int strobe;
-};
-
 /**
  * struct tps65218 - tps65218 sub-driver chip access routines
  *
@@ -280,7 +262,6 @@ struct tps65218 {
 	u32 irq_mask;
 	struct regmap_irq_chip_data *irq_data;
 	struct regulator_desc desc[TPS65218_NUM_REGULATOR];
-	struct tps_info *info[TPS65218_NUM_REGULATOR];
 	struct regmap *regmap;
 	u8 *strobes;
 };

include/linux/regulator/da9211.h

 /*
  * da9211.h - Regulator device driver for DA9211/DA9212
- * /DA9213/DA9214/DA9215
+ * /DA9213/DA9223/DA9214/DA9224/DA9215/DA9225
  * Copyright (C) 2015  Dialog Semiconductor Ltd.
  *
  * This program is free software; you can redistribute it and/or
@@ -25,8 +25,11 @@ enum da9211_chip_id {
 	DA9211,
 	DA9212,
 	DA9213,
+	DA9223,
 	DA9214,
+	DA9224,
 	DA9215,
+	DA9225,
 };
 
 struct da9211_pdata {