i2c-designware: Check component type register

Designware component type register is checked before attaching to the device.
Signed-off-by: NJean-Hugues Deschenes <jean-hugues.deschenes@octasic.com>
Signed-off-by: NDirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

drivers/i2c/busses/i2c-designware.c

@@ -69,6 +69,7 @@
 #define DW_IC_TXFLR		0x74
 #define DW_IC_RXFLR		0x78
 #define DW_IC_COMP_PARAM_1	0xf4
+#define DW_IC_COMP_TYPE		0xfc
 #define DW_IC_TX_ABRT_SOURCE	0x80
 
 #define DW_IC_CON_MASTER		0x1
@@ -710,6 +711,7 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev)
 	struct i2c_adapter *adap;
 	struct resource *mem, *ioarea;
 	int irq, r;
+	u32 reg;
 
 	/* NOTE: driver uses the static register mapping */
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -756,12 +758,19 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev)
 		r = -EBUSY;
 		goto err_unuse_clocks;
 	}
-	{
-		u32 param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
 
-		dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1;
-		dev->rx_fifo_depth = ((param1 >> 8)  & 0xff) + 1;
+	reg = dw_readl(dev, DW_IC_COMP_TYPE);
+	if (reg != 0x44570140) {
+		dev_err(&pdev->dev, "Unknown Synopsys component type: "
+				"0x%08x\n",	reg);
+		r = -ENODEV;
+		goto err_iounmap;
 	}
+
+	reg = dw_readl(dev, DW_IC_COMP_PARAM_1);
+	dev->tx_fifo_depth = ((reg >> 16) & 0xff) + 1;
+	dev->rx_fifo_depth = ((reg >> 8)  & 0xff) + 1;
+
 	i2c_dw_init(dev);
 
 	dw_writel(dev, 0, DW_IC_INTR_MASK); /* disable IRQ */