Merge branch 'hwmon-for-linus' of git://github.com/groeck/linux

* 'hwmon-for-linus' of git://github.com/groeck/linux:
  hwmon: (ucd9000/ucd9200) Optimize array walk
  hwmon: (max16065) Add chip access warning to documentation
  hwmon: (max16065) Fix current calculation

Documentation/hwmon/max16065

@@ -62,6 +62,13 @@ can be safely used to identify the chip. You will have to instantiate
 the devices explicitly. Please see Documentation/i2c/instantiating-devices for
 details.
 
+WARNING: Do not access chip registers using the i2cdump command, and do not use
+any of the i2ctools commands on a command register (0xa5 to 0xac). The chips
+supported by this driver interpret any access to a command register (including
+read commands) as request to execute the command in question. This may result in
+power loss, board resets, and/or Flash corruption. Worst case, your board may
+turn into a brick.
+
 
 Sysfs entries
 -------------

drivers/hwmon/max16065.c

@@ -124,7 +124,7 @@ static inline int MV_TO_LIMIT(int mv, int range)
 
 static inline int ADC_TO_CURR(int adc, int gain)
 {
-	return adc * 1400000 / gain * 255;
+	return adc * 1400000 / (gain * 255);
 }
 
 /*

drivers/hwmon/pmbus/ucd9000.c

@@ -141,13 +141,11 @@ static int ucd9000_probe(struct i2c_client *client,
 	block_buffer[ret] = '\0';
 	dev_info(&client->dev, "Device ID %s\n", block_buffer);
 
-	mid = NULL;
-	for (i = 0; i < ARRAY_SIZE(ucd9000_id); i++) {
-		mid = &ucd9000_id[i];
+	for (mid = ucd9000_id; mid->name[0]; mid++) {
 		if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
 			break;
 	}
-	if (!mid || !strlen(mid->name)) {
+	if (!mid->name[0]) {
 		dev_err(&client->dev, "Unsupported device\n");
 		return -ENODEV;
 	}

drivers/hwmon/pmbus/ucd9200.c

@@ -68,13 +68,11 @@ static int ucd9200_probe(struct i2c_client *client,
 	block_buffer[ret] = '\0';
 	dev_info(&client->dev, "Device ID %s\n", block_buffer);
 
-	mid = NULL;
-	for (i = 0; i < ARRAY_SIZE(ucd9200_id); i++) {
-		mid = &ucd9200_id[i];
+	for (mid = ucd9200_id; mid->name[0]; mid++) {
 		if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
 			break;
 	}
-	if (!mid || !strlen(mid->name)) {
+	if (!mid->name[0]) {
 		dev_err(&client->dev, "Unsupported device\n");
 		return -ENODEV;
 	}