Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 170
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 4f793db3 编写于 作者: H H Hartley Sweeten 提交者： Greg Kroah-Hartman
浏览文件
操作

staging: comedi: dmm32at: remove forward declarations 1 

Move the attach/detach functions as well as the boardinfo variable
to remove the need to most of the forward declarations.

Add some whitespace to the boardinfo during the move.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 17f49dd4
隐藏空白更改
内联 并排
Showing with 172 addition and 201 deletion
drivers/staging/comedi/drivers/dmm32at.c
浏览文件 @ 4f793db3
......@@ -175,19 +175,6 @@ struct dmm32at_board {
int have_dio;
int dio_chans;
};
static const struct dmm32at_board dmm32at_boards[] = {
{
.name = "dmm32at",
.ai_chans = 32,
.ai_bits = 16,
.ai_ranges = &dmm32at_airanges,
.ao_chans = 4,
.ao_bits = 12,
.ao_ranges = &dmm32at_aoranges,
.have_dio = 1,
.dio_chans = 24,
},
};
/* this structure is for data unique to this hardware driver. If
* several hardware drivers keep similar information in this structure,
......@@ -212,197 +199,9 @@ struct dmm32at_private {
#define devpriv ((struct dmm32at_private *)dev->private)
/* prototypes for driver functions below */
static int dmm32at_ai_rinsn(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data);
static int dmm32at_ao_winsn(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data);
static int dmm32at_ao_rinsn(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data);
static int dmm32at_dio_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data);
static int dmm32at_dio_insn_config(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data);
static int dmm32at_ai_cmdtest(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_cmd *cmd);
static int dmm32at_ai_cmd(struct comedi_device *dev,
struct comedi_subdevice *s);
static int dmm32at_ai_cancel(struct comedi_device *dev,
struct comedi_subdevice *s);
static int dmm32at_ns_to_timer(unsigned int *ns, int round);
static irqreturn_t dmm32at_isr(int irq, void *d);
void dmm32at_setaitimer(struct comedi_device *dev, unsigned int nansec);
/*
* Attach is called by the Comedi core to configure the driver
* for a particular board. If you specified a board_name array
* in the driver structure, dev->board_ptr contains that
* address.
*/
static int dmm32at_attach(struct comedi_device *dev,
struct comedi_devconfig *it)
{
const struct dmm32at_board *board = comedi_board(dev);
int ret;
struct comedi_subdevice *s;
unsigned char aihi, ailo, fifostat, aistat, intstat, airback;
unsigned long iobase;
unsigned int irq;
iobase = it->options[0];
irq = it->options[1];
printk(KERN_INFO "comedi%d: dmm32at: attaching\n", dev->minor);
printk(KERN_DEBUG "dmm32at: probing at address 0x%04lx, irq %u\n",
iobase, irq);
/* register address space */
if (!request_region(iobase, DMM32AT_MEMSIZE, board->name)) {
printk(KERN_ERR "comedi%d: dmm32at: I/O port conflict\n",
dev->minor);
return -EIO;
}
dev->iobase = iobase;
/* the following just makes sure the board is there and gets
it to a known state */
/* reset the board */
dmm_outb(dev, DMM32AT_CNTRL, DMM32AT_RESET);
/* allow a millisecond to reset */
udelay(1000);
/* zero scan and fifo control */
dmm_outb(dev, DMM32AT_FIFOCNTRL, 0x0);
/* zero interrupt and clock control */
dmm_outb(dev, DMM32AT_INTCLOCK, 0x0);
/* write a test channel range, the high 3 bits should drop */
dmm_outb(dev, DMM32AT_AILOW, 0x80);
dmm_outb(dev, DMM32AT_AIHIGH, 0xff);
/* set the range at 10v unipolar */
dmm_outb(dev, DMM32AT_AICONF, DMM32AT_RANGE_U10);
/* should take 10 us to settle, here's a hundred */
udelay(100);
/* read back the values */
ailo = dmm_inb(dev, DMM32AT_AILOW);
aihi = dmm_inb(dev, DMM32AT_AIHIGH);
fifostat = dmm_inb(dev, DMM32AT_FIFOSTAT);
aistat = dmm_inb(dev, DMM32AT_AISTAT);
intstat = dmm_inb(dev, DMM32AT_INTCLOCK);
airback = dmm_inb(dev, DMM32AT_AIRBACK);
printk(KERN_DEBUG "dmm32at: lo=0x%02x hi=0x%02x fifostat=0x%02x\n",
ailo, aihi, fifostat);
printk(KERN_DEBUG
"dmm32at: aistat=0x%02x intstat=0x%02x airback=0x%02x\n",
aistat, intstat, airback);
if ((ailo != 0x00) || (aihi != 0x1f) || (fifostat != 0x80) ||
(aistat != 0x60 || (intstat != 0x00) || airback != 0x0c)) {
printk(KERN_ERR "dmmat32: board detection failed\n");
return -EIO;
}
/* board is there, register interrupt */
if (irq) {
ret = request_irq(irq, dmm32at_isr, 0, board->name, dev);
if (ret < 0) {
printk(KERN_ERR "dmm32at: irq conflict\n");
return ret;
}
dev->irq = irq;
}
dev->board_name = board->name;
/*
* Allocate the private structure area. alloc_private() is a
* convenient macro defined in comedidev.h.
*/
if (alloc_private(dev, sizeof(struct dmm32at_private)) < 0)
return -ENOMEM;
ret = comedi_alloc_subdevices(dev, 3);
if (ret)
return ret;
s = dev->subdevices + 0;
dev->read_subdev = s;
/* analog input subdevice */
s->type = COMEDI_SUBD_AI;
/* we support single-ended (ground) and differential */
s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF | SDF_CMD_READ;
s->n_chan = board->ai_chans;
s->maxdata = (1 << board->ai_bits) - 1;
s->range_table = board->ai_ranges;
s->len_chanlist = 32; /* This is the maximum chanlist length that
the board can handle */
s->insn_read = dmm32at_ai_rinsn;
s->do_cmd = dmm32at_ai_cmd;
s->do_cmdtest = dmm32at_ai_cmdtest;
s->cancel = dmm32at_ai_cancel;
s = dev->subdevices + 1;
/* analog output subdevice */
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITABLE;
s->n_chan = board->ao_chans;
s->maxdata = (1 << board->ao_bits) - 1;
s->range_table = board->ao_ranges;
s->insn_write = dmm32at_ao_winsn;
s->insn_read = dmm32at_ao_rinsn;
s = dev->subdevices + 2;
/* digital i/o subdevice */
if (board->have_dio) {
/* get access to the DIO regs */
dmm_outb(dev, DMM32AT_CNTRL, DMM32AT_DIOACC);
/* set the DIO's to the defualt input setting */
devpriv->dio_config = DMM32AT_DIRA | DMM32AT_DIRB |
DMM32AT_DIRCL | DMM32AT_DIRCH | DMM32AT_DIENABLE;
dmm_outb(dev, DMM32AT_DIOCONF, devpriv->dio_config);
/* set up the subdevice */
s->type = COMEDI_SUBD_DIO;
s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
s->n_chan = board->dio_chans;
s->maxdata = 1;
s->state = 0;
s->range_table = &range_digital;
s->insn_bits = dmm32at_dio_insn_bits;
s->insn_config = dmm32at_dio_insn_config;
} else {
s->type = COMEDI_SUBD_UNUSED;
}
/* success */
printk(KERN_INFO "comedi%d: dmm32at: attached\n", dev->minor);
return 1;
}
static void dmm32at_detach(struct comedi_device *dev)
{
if (dev->irq)
free_irq(dev->irq, dev);
if (dev->iobase)
release_region(dev->iobase, DMM32AT_MEMSIZE);
}
/*
* "instructions" read/write data in "one-shot" or "software-triggered"
* mode.
......@@ -990,6 +789,178 @@ void dmm32at_setaitimer(struct comedi_device *dev, unsigned int nansec)
}
static int dmm32at_attach(struct comedi_device *dev,
struct comedi_devconfig *it)
{
const struct dmm32at_board *board = comedi_board(dev);
int ret;
struct comedi_subdevice *s;
unsigned char aihi, ailo, fifostat, aistat, intstat, airback;
unsigned long iobase;
unsigned int irq;
iobase = it->options[0];
irq = it->options[1];
printk(KERN_INFO "comedi%d: dmm32at: attaching\n", dev->minor);
printk(KERN_DEBUG "dmm32at: probing at address 0x%04lx, irq %u\n",
iobase, irq);
/* register address space */
if (!request_region(iobase, DMM32AT_MEMSIZE, board->name)) {
printk(KERN_ERR "comedi%d: dmm32at: I/O port conflict\n",
dev->minor);
return -EIO;
}
dev->iobase = iobase;
/* the following just makes sure the board is there and gets
it to a known state */
/* reset the board */
dmm_outb(dev, DMM32AT_CNTRL, DMM32AT_RESET);
/* allow a millisecond to reset */
udelay(1000);
/* zero scan and fifo control */
dmm_outb(dev, DMM32AT_FIFOCNTRL, 0x0);
/* zero interrupt and clock control */
dmm_outb(dev, DMM32AT_INTCLOCK, 0x0);
/* write a test channel range, the high 3 bits should drop */
dmm_outb(dev, DMM32AT_AILOW, 0x80);
dmm_outb(dev, DMM32AT_AIHIGH, 0xff);
/* set the range at 10v unipolar */
dmm_outb(dev, DMM32AT_AICONF, DMM32AT_RANGE_U10);
/* should take 10 us to settle, here's a hundred */
udelay(100);
/* read back the values */
ailo = dmm_inb(dev, DMM32AT_AILOW);
aihi = dmm_inb(dev, DMM32AT_AIHIGH);
fifostat = dmm_inb(dev, DMM32AT_FIFOSTAT);
aistat = dmm_inb(dev, DMM32AT_AISTAT);
intstat = dmm_inb(dev, DMM32AT_INTCLOCK);
airback = dmm_inb(dev, DMM32AT_AIRBACK);
printk(KERN_DEBUG "dmm32at: lo=0x%02x hi=0x%02x fifostat=0x%02x\n",
ailo, aihi, fifostat);
printk(KERN_DEBUG
"dmm32at: aistat=0x%02x intstat=0x%02x airback=0x%02x\n",
aistat, intstat, airback);
if ((ailo != 0x00) || (aihi != 0x1f) || (fifostat != 0x80) ||
(aistat != 0x60 || (intstat != 0x00) || airback != 0x0c)) {
printk(KERN_ERR "dmmat32: board detection failed\n");
return -EIO;
}
/* board is there, register interrupt */
if (irq) {
ret = request_irq(irq, dmm32at_isr, 0, board->name, dev);
if (ret < 0) {
printk(KERN_ERR "dmm32at: irq conflict\n");
return ret;
}
dev->irq = irq;
}
dev->board_name = board->name;
/*
* Allocate the private structure area. alloc_private() is a
* convenient macro defined in comedidev.h.
*/
if (alloc_private(dev, sizeof(struct dmm32at_private)) < 0)
return -ENOMEM;
ret = comedi_alloc_subdevices(dev, 3);
if (ret)
return ret;
s = dev->subdevices + 0;
dev->read_subdev = s;
/* analog input subdevice */
s->type = COMEDI_SUBD_AI;
/* we support single-ended (ground) and differential */
s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF | SDF_CMD_READ;
s->n_chan = board->ai_chans;
s->maxdata = (1 << board->ai_bits) - 1;
s->range_table = board->ai_ranges;
s->len_chanlist = 32; /* This is the maximum chanlist length that
the board can handle */
s->insn_read = dmm32at_ai_rinsn;
s->do_cmd = dmm32at_ai_cmd;
s->do_cmdtest = dmm32at_ai_cmdtest;
s->cancel = dmm32at_ai_cancel;
s = dev->subdevices + 1;
/* analog output subdevice */
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITABLE;
s->n_chan = board->ao_chans;
s->maxdata = (1 << board->ao_bits) - 1;
s->range_table = board->ao_ranges;
s->insn_write = dmm32at_ao_winsn;
s->insn_read = dmm32at_ao_rinsn;
s = dev->subdevices + 2;
/* digital i/o subdevice */
if (board->have_dio) {
/* get access to the DIO regs */
dmm_outb(dev, DMM32AT_CNTRL, DMM32AT_DIOACC);
/* set the DIO's to the defualt input setting */
devpriv->dio_config = DMM32AT_DIRA | DMM32AT_DIRB |
DMM32AT_DIRCL | DMM32AT_DIRCH | DMM32AT_DIENABLE;
dmm_outb(dev, DMM32AT_DIOCONF, devpriv->dio_config);
/* set up the subdevice */
s->type = COMEDI_SUBD_DIO;
s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
s->n_chan = board->dio_chans;
s->maxdata = 1;
s->state = 0;
s->range_table = &range_digital;
s->insn_bits = dmm32at_dio_insn_bits;
s->insn_config = dmm32at_dio_insn_config;
} else {
s->type = COMEDI_SUBD_UNUSED;
}
/* success */
printk(KERN_INFO "comedi%d: dmm32at: attached\n", dev->minor);
return 1;
}
static void dmm32at_detach(struct comedi_device *dev)
{
if (dev->irq)
free_irq(dev->irq, dev);
if (dev->iobase)
release_region(dev->iobase, DMM32AT_MEMSIZE);
}
static const struct dmm32at_board dmm32at_boards[] = {
{
.name = "dmm32at",
.ai_chans = 32,
.ai_bits = 16,
.ai_ranges = &dmm32at_airanges,
.ao_chans = 4,
.ao_bits = 12,
.ao_ranges = &dmm32at_aoranges,
.have_dio = 1,
.dio_chans = 24,
},
};
static struct comedi_driver dmm32at_driver = {
.driver_name = "dmm32at",
.module = THIS_MODULE,
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或