提交 4eef6cbf 编写于 作者: A Arnd Bergmann

Input: eeti_ts: pass gpio value instead of IRQ

The EETI touchscreen asserts its IRQ line as soon as it has data in its
internal buffers. The line is automatically deasserted once all data has
been read via I2C. Hence, the driver has to monitor the GPIO line and
cannot simply rely on the interrupt handler reception.

In the current implementation of the driver, irq_to_gpio() is used to
determine the GPIO number from the i2c_client's IRQ value.

As irq_to_gpio() is not available on all platforms, this patch changes
this and makes the driver ignore the passed in IRQ. Instead, a GPIO is
added to the platform_data struct and gpio_to_irq is used to derive the
IRQ from that GPIO. If this fails, bail out. The driver is only able to
work in environments where the touchscreen GPIO can be mapped to an
IRQ.

Without this patch, building raumfeld_defconfig results in:

drivers/input/touchscreen/eeti_ts.c: In function 'eeti_ts_irq_active':
drivers/input/touchscreen/eeti_ts.c:65:2: error: implicit declaration of function 'irq_to_gpio' [-Werror=implicit-function-declaration]
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org (v3.2+)
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Sven Neumann <s.neumann@raumfeld.com>
Cc: linux-input@vger.kernel.org
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
上级 59ee93a5
......@@ -953,12 +953,12 @@ static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = {
static struct eeti_ts_platform_data eeti_ts_pdata = {
.irq_active_high = 1,
.irq_gpio = GPIO_TOUCH_IRQ,
};
static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = {
.type = "eeti_ts",
.addr = 0x0a,
.irq = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ),
.platform_data = &eeti_ts_pdata,
};
......
......@@ -48,7 +48,7 @@ struct eeti_ts_priv {
struct input_dev *input;
struct work_struct work;
struct mutex mutex;
int irq, irq_active_high;
int irq_gpio, irq, irq_active_high;
};
#define EETI_TS_BITDEPTH (11)
......@@ -62,7 +62,7 @@ struct eeti_ts_priv {
static inline int eeti_ts_irq_active(struct eeti_ts_priv *priv)
{
return gpio_get_value(irq_to_gpio(priv->irq)) == priv->irq_active_high;
return gpio_get_value(priv->irq_gpio) == priv->irq_active_high;
}
static void eeti_ts_read(struct work_struct *work)
......@@ -157,7 +157,7 @@ static void eeti_ts_close(struct input_dev *dev)
static int __devinit eeti_ts_probe(struct i2c_client *client,
const struct i2c_device_id *idp)
{
struct eeti_ts_platform_data *pdata;
struct eeti_ts_platform_data *pdata = client->dev.platform_data;
struct eeti_ts_priv *priv;
struct input_dev *input;
unsigned int irq_flags;
......@@ -199,9 +199,12 @@ static int __devinit eeti_ts_probe(struct i2c_client *client,
priv->client = client;
priv->input = input;
priv->irq = client->irq;
priv->irq_gpio = pdata->irq_gpio;
priv->irq = gpio_to_irq(pdata->irq_gpio);
pdata = client->dev.platform_data;
err = gpio_request_one(pdata->irq_gpio, GPIOF_IN, client->name);
if (err < 0)
goto err1;
if (pdata)
priv->irq_active_high = pdata->irq_active_high;
......@@ -215,13 +218,13 @@ static int __devinit eeti_ts_probe(struct i2c_client *client,
err = input_register_device(input);
if (err)
goto err1;
goto err2;
err = request_irq(priv->irq, eeti_ts_isr, irq_flags,
client->name, priv);
if (err) {
dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
goto err2;
goto err3;
}
/*
......@@ -233,9 +236,11 @@ static int __devinit eeti_ts_probe(struct i2c_client *client,
device_init_wakeup(&client->dev, 0);
return 0;
err2:
err3:
input_unregister_device(input);
input = NULL; /* so we dont try to free it below */
err2:
gpio_free(pdata->irq_gpio);
err1:
input_free_device(input);
kfree(priv);
......
......@@ -2,6 +2,7 @@
#define LINUX_INPUT_EETI_TS_H
struct eeti_ts_platform_data {
int irq_gpio;
unsigned int irq_active_high;
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册