IDE: Coding Style fixes to drivers/ide/pci/opti621.c

Compile tested.

[bart: some fixes, md5sum checked]
Signed-off-by: NPaolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

drivers/ide/pci/opti621.c

@@ -57,9 +57,9 @@
  * (use idebus=xx to select PCI bus speed).
  *
  * Version 0.1, Nov 8, 1996
- * by Jaromir Koutek, for 2.1.8. 
+ * by Jaromir Koutek, for 2.1.8.
  * Initial version of driver.
- * 
+ *
  * Version 0.2
  * Number 0.2 skipped.
  *
@@ -75,7 +75,7 @@
  * by Jaromir Koutek
  * Updates for use with (again) new IDE block driver.
  * Update of documentation.
- * 
+ *
  * Version 0.6, Jan 2, 1999
  * by Jaromir Koutek
  * Reversed to version 0.3 of the driver, because
@@ -208,29 +208,34 @@ typedef struct pio_clocks_s {
 
 static void compute_clocks(int pio, pio_clocks_t *clks)
 {
-        if (pio != PIO_NOT_EXIST) {
-        	int adr_setup, data_pls;
+	if (pio != PIO_NOT_EXIST) {
+		int adr_setup, data_pls;
 		int bus_speed = system_bus_clock();
 
- 	       	adr_setup = ide_pio_timings[pio].setup_time;
-  	      	data_pls = ide_pio_timings[pio].active_time;
-	  	clks->address_time = cmpt_clk(adr_setup, bus_speed);
-	     	clks->data_time = cmpt_clk(data_pls, bus_speed);
-     		clks->recovery_time = cmpt_clk(ide_pio_timings[pio].cycle_time
-     			- adr_setup-data_pls, bus_speed);
-     		if (clks->address_time<1) clks->address_time = 1;
-     		if (clks->address_time>4) clks->address_time = 4;
-     		if (clks->data_time<1) clks->data_time = 1;
-     		if (clks->data_time>16) clks->data_time = 16;
-     		if (clks->recovery_time<2) clks->recovery_time = 2;
-     		if (clks->recovery_time>17) clks->recovery_time = 17;
+		adr_setup = ide_pio_timings[pio].setup_time;
+		data_pls = ide_pio_timings[pio].active_time;
+		clks->address_time = cmpt_clk(adr_setup, bus_speed);
+		clks->data_time = cmpt_clk(data_pls, bus_speed);
+		clks->recovery_time = cmpt_clk(ide_pio_timings[pio].cycle_time
+			- adr_setup-data_pls, bus_speed);
+		if (clks->address_time < 1)
+			clks->address_time = 1;
+		if (clks->address_time > 4)
+			clks->address_time = 4;
+		if (clks->data_time < 1)
+			clks->data_time = 1;
+		if (clks->data_time > 16)
+			clks->data_time = 16;
+		if (clks->recovery_time < 2)
+			clks->recovery_time = 2;
+		if (clks->recovery_time > 17)
+			clks->recovery_time = 17;
 	} else {
 		clks->address_time = 1;
 		clks->data_time = 1;
 		clks->recovery_time = 2;
 		/* minimal values */
 	}
- 
 }
 
 static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
@@ -247,8 +252,8 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
 
 	/* sets drive->drive_data for both drives */
 	compute_pios(drive, pio);
- 	pio1 = hwif->drives[0].drive_data;
- 	pio2 = hwif->drives[1].drive_data;
+	pio1 = hwif->drives[0].drive_data;
+	pio2 = hwif->drives[1].drive_data;
 
 	compute_clocks(pio1, &first);
 	compute_clocks(pio2, &second);
@@ -275,7 +280,7 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
 
 	spin_lock_irqsave(&opti621_lock, flags);
 
-     	reg_base = hwif->io_ports[IDE_DATA_OFFSET];
+	reg_base = hwif->io_ports[IDE_DATA_OFFSET];
 
 	/* allow Register-B */
 	outb(0xc0, reg_base + CNTRL_REG);
@@ -324,7 +329,7 @@ static void __devinit opti621_port_init_devs(ide_hwif_t *hwif)
 /*
  * init_hwif_opti621() is called once for each hwif found at boot.
  */
-static void __devinit init_hwif_opti621 (ide_hwif_t *hwif)
+static void __devinit init_hwif_opti621(ide_hwif_t *hwif)
 {
 	hwif->port_init_devs = opti621_port_init_devs;
 	hwif->set_pio_mode = &opti621_set_pio_mode;
@@ -334,15 +339,15 @@ static const struct ide_port_info opti621_chipsets[] __devinitdata = {
 	{	/* 0 */
 		.name		= "OPTI621",
 		.init_hwif	= init_hwif_opti621,
-		.enablebits	= {{0x45,0x80,0x00}, {0x40,0x08,0x00}},
+		.enablebits	= { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
 		.host_flags	= IDE_HFLAG_TRUST_BIOS_FOR_DMA,
 		.pio_mask	= ATA_PIO3,
 		.swdma_mask	= ATA_SWDMA2,
 		.mwdma_mask	= ATA_MWDMA2,
-	},{	/* 1 */
+	}, {	/* 1 */
 		.name		= "OPTI621X",
 		.init_hwif	= init_hwif_opti621,
-		.enablebits	= {{0x45,0x80,0x00}, {0x40,0x08,0x00}},
+		.enablebits	= { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
 		.host_flags	= IDE_HFLAG_TRUST_BIOS_FOR_DMA,
 		.pio_mask	= ATA_PIO3,
 		.swdma_mask	= ATA_SWDMA2,