提交 4eb174be 编写于 作者: M Michael Hennerich 提交者: Linus Torvalds

ad525x_dpot: new driver for AD525x digital potentiometers

This driver supports the non-volatile digital potentiometers via I2C:
AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, and AD5255

It provides a sysfs interface to each device for reading/writing which
is documented in Documentation/misc-devices/ad525x_dpot.txt.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NChris Verges <chrisv@cyberswitching.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 00b55864
---------------------------------
AD525x Digital Potentiometers
---------------------------------
The ad525x_dpot driver exports a simple sysfs interface. This allows you to
work with the immediate resistance settings as well as update the saved startup
settings. Access to the factory programmed tolerance is also provided, but
interpretation of this settings is required by the end application according to
the specific part in use.
---------
Files
---------
Each dpot device will have a set of eeprom, rdac, and tolerance files. How
many depends on the actual part you have, as will the range of allowed values.
The eeprom files are used to program the startup value of the device.
The rdac files are used to program the immediate value of the device.
The tolerance files are the read-only factory programmed tolerance settings
and may vary greatly on a part-by-part basis. For exact interpretation of
this field, please consult the datasheet for your part. This is presented
as a hex file for easier parsing.
-----------
Example
-----------
Locate the device in your sysfs tree. This is probably easiest by going into
the common i2c directory and locating the device by the i2c slave address.
# ls /sys/bus/i2c/devices/
0-0022 0-0027 0-002f
So assuming the device in question is on the first i2c bus and has the slave
address of 0x2f, we descend (unrelated sysfs entries have been trimmed).
# ls /sys/bus/i2c/devices/0-002f/
eeprom0 rdac0 tolerance0
You can use simple reads/writes to access these files:
# cd /sys/bus/i2c/devices/0-002f/
# cat eeprom0
0
# echo 10 > eeprom0
# cat eeprom0
10
# cat rdac0
5
# echo 3 > rdac0
# cat rdac0
3
......@@ -13,6 +13,20 @@ menuconfig MISC_DEVICES
if MISC_DEVICES
config AD525X_DPOT
tristate "Analog Devices AD525x Digital Potentiometers"
depends on I2C && SYSFS
help
If you say yes here, you get support for the Analog Devices
AD5258, AD5259, AD5251, AD5252, AD5253, AD5254 and AD5255
digital potentiometer chips.
See Documentation/misc-devices/ad525x_dpot.txt for the
userspace interface.
This driver can also be built as a module. If so, the module
will be called ad525x_dpot.
config ATMEL_PWM
tristate "Atmel AT32/AT91 PWM support"
depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9
......
......@@ -4,6 +4,7 @@
obj-$(CONFIG_IBM_ASM) += ibmasm/
obj-$(CONFIG_HDPU_FEATURES) += hdpuftrs/
obj-$(CONFIG_AD525X_DPOT) += ad525x_dpot.o
obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o
obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o
......
/*
* ad525x_dpot: Driver for the Analog Devices AD525x digital potentiometers
* Copyright (c) 2009 Analog Devices, Inc.
* Author: Michael Hennerich <hennerich@blackfin.uclinux.org>
*
* DEVID #Wipers #Positions Resistor Options (kOhm)
* AD5258 1 64 1, 10, 50, 100
* AD5259 1 256 5, 10, 50, 100
* AD5251 2 64 1, 10, 50, 100
* AD5252 2 256 1, 10, 50, 100
* AD5255 3 512 25, 250
* AD5253 4 64 1, 10, 50, 100
* AD5254 4 256 1, 10, 50, 100
*
* See Documentation/misc-devices/ad525x_dpot.txt for more info.
*
* derived from ad5258.c
* Copyright (c) 2009 Cyber Switching, Inc.
* Author: Chris Verges <chrisv@cyberswitching.com>
*
* derived from ad5252.c
* Copyright (c) 2006 Michael Hennerich <hennerich@blackfin.uclinux.org>
*
* Licensed under the GPL-2 or later.
*/
#include <linux/module.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/delay.h>
#define DRIVER_NAME "ad525x_dpot"
#define DRIVER_VERSION "0.1"
enum dpot_devid {
AD5258_ID,
AD5259_ID,
AD5251_ID,
AD5252_ID,
AD5253_ID,
AD5254_ID,
AD5255_ID,
};
#define AD5258_MAX_POSITION 64
#define AD5259_MAX_POSITION 256
#define AD5251_MAX_POSITION 64
#define AD5252_MAX_POSITION 256
#define AD5253_MAX_POSITION 64
#define AD5254_MAX_POSITION 256
#define AD5255_MAX_POSITION 512
#define AD525X_RDAC0 0
#define AD525X_RDAC1 1
#define AD525X_RDAC2 2
#define AD525X_RDAC3 3
#define AD525X_REG_TOL 0x18
#define AD525X_TOL_RDAC0 (AD525X_REG_TOL | AD525X_RDAC0)
#define AD525X_TOL_RDAC1 (AD525X_REG_TOL | AD525X_RDAC1)
#define AD525X_TOL_RDAC2 (AD525X_REG_TOL | AD525X_RDAC2)
#define AD525X_TOL_RDAC3 (AD525X_REG_TOL | AD525X_RDAC3)
/* RDAC-to-EEPROM Interface Commands */
#define AD525X_I2C_RDAC (0x00 << 5)
#define AD525X_I2C_EEPROM (0x01 << 5)
#define AD525X_I2C_CMD (0x80)
#define AD525X_DEC_ALL_6DB (AD525X_I2C_CMD | (0x4 << 3))
#define AD525X_INC_ALL_6DB (AD525X_I2C_CMD | (0x9 << 3))
#define AD525X_DEC_ALL (AD525X_I2C_CMD | (0x6 << 3))
#define AD525X_INC_ALL (AD525X_I2C_CMD | (0xB << 3))
static s32 ad525x_read(struct i2c_client *client, u8 reg);
static s32 ad525x_write(struct i2c_client *client, u8 reg, u8 value);
/*
* Client data (each client gets its own)
*/
struct dpot_data {
struct mutex update_lock;
unsigned rdac_mask;
unsigned max_pos;
unsigned devid;
};
/* sysfs functions */
static ssize_t sysfs_show_reg(struct device *dev,
struct device_attribute *attr, char *buf, u32 reg)
{
struct i2c_client *client = to_i2c_client(dev);
struct dpot_data *data = i2c_get_clientdata(client);
s32 value;
mutex_lock(&data->update_lock);
value = ad525x_read(client, reg);
mutex_unlock(&data->update_lock);
if (value < 0)
return -EINVAL;
/*
* Let someone else deal with converting this ...
* the tolerance is a two-byte value where the MSB
* is a sign + integer value, and the LSB is a
* decimal value. See page 18 of the AD5258
* datasheet (Rev. A) for more details.
*/
if (reg & AD525X_REG_TOL)
return sprintf(buf, "0x%04x\n", value & 0xFFFF);
else
return sprintf(buf, "%u\n", value & data->rdac_mask);
}
static ssize_t sysfs_set_reg(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count, u32 reg)
{
struct i2c_client *client = to_i2c_client(dev);
struct dpot_data *data = i2c_get_clientdata(client);
unsigned long value;
int err;
err = strict_strtoul(buf, 10, &value);
if (err)
return err;
if (value > data->rdac_mask)
value = data->rdac_mask;
mutex_lock(&data->update_lock);
ad525x_write(client, reg, value);
if (reg & AD525X_I2C_EEPROM)
msleep(26); /* Sleep while the EEPROM updates */
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t sysfs_do_cmd(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count, u32 reg)
{
struct i2c_client *client = to_i2c_client(dev);
struct dpot_data *data = i2c_get_clientdata(client);
mutex_lock(&data->update_lock);
ad525x_write(client, reg, 0);
mutex_unlock(&data->update_lock);
return count;
}
/* ------------------------------------------------------------------------- */
static ssize_t show_rdac0(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sysfs_show_reg(dev, attr, buf, AD525X_I2C_RDAC | AD525X_RDAC0);
}
static ssize_t set_rdac0(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
return sysfs_set_reg(dev, attr, buf, count,
AD525X_I2C_RDAC | AD525X_RDAC0);
}
static DEVICE_ATTR(rdac0, S_IWUSR | S_IRUGO, show_rdac0, set_rdac0);
static ssize_t show_eeprom0(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sysfs_show_reg(dev, attr, buf, AD525X_I2C_EEPROM | AD525X_RDAC0);
}
static ssize_t set_eeprom0(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
return sysfs_set_reg(dev, attr, buf, count,
AD525X_I2C_EEPROM | AD525X_RDAC0);
}
static DEVICE_ATTR(eeprom0, S_IWUSR | S_IRUGO, show_eeprom0, set_eeprom0);
static ssize_t show_tolerance0(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sysfs_show_reg(dev, attr, buf,
AD525X_I2C_EEPROM | AD525X_TOL_RDAC0);
}
static DEVICE_ATTR(tolerance0, S_IRUGO, show_tolerance0, NULL);
/* ------------------------------------------------------------------------- */
static ssize_t show_rdac1(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sysfs_show_reg(dev, attr, buf, AD525X_I2C_RDAC | AD525X_RDAC1);
}
static ssize_t set_rdac1(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
return sysfs_set_reg(dev, attr, buf, count,
AD525X_I2C_RDAC | AD525X_RDAC1);
}
static DEVICE_ATTR(rdac1, S_IWUSR | S_IRUGO, show_rdac1, set_rdac1);
static ssize_t show_eeprom1(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sysfs_show_reg(dev, attr, buf, AD525X_I2C_EEPROM | AD525X_RDAC1);
}
static ssize_t set_eeprom1(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
return sysfs_set_reg(dev, attr, buf, count,
AD525X_I2C_EEPROM | AD525X_RDAC1);
}
static DEVICE_ATTR(eeprom1, S_IWUSR | S_IRUGO, show_eeprom1, set_eeprom1);
static ssize_t show_tolerance1(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sysfs_show_reg(dev, attr, buf,
AD525X_I2C_EEPROM | AD525X_TOL_RDAC1);
}
static DEVICE_ATTR(tolerance1, S_IRUGO, show_tolerance1, NULL);
/* ------------------------------------------------------------------------- */
static ssize_t show_rdac2(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sysfs_show_reg(dev, attr, buf, AD525X_I2C_RDAC | AD525X_RDAC2);
}
static ssize_t set_rdac2(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
return sysfs_set_reg(dev, attr, buf, count,
AD525X_I2C_RDAC | AD525X_RDAC2);
}
static DEVICE_ATTR(rdac2, S_IWUSR | S_IRUGO, show_rdac2, set_rdac2);
static ssize_t show_eeprom2(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sysfs_show_reg(dev, attr, buf, AD525X_I2C_EEPROM | AD525X_RDAC2);
}
static ssize_t set_eeprom2(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
return sysfs_set_reg(dev, attr, buf, count,
AD525X_I2C_EEPROM | AD525X_RDAC2);
}
static DEVICE_ATTR(eeprom2, S_IWUSR | S_IRUGO, show_eeprom2, set_eeprom2);
static ssize_t show_tolerance2(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sysfs_show_reg(dev, attr, buf,
AD525X_I2C_EEPROM | AD525X_TOL_RDAC2);
}
static DEVICE_ATTR(tolerance2, S_IRUGO, show_tolerance2, NULL);
/* ------------------------------------------------------------------------- */
static ssize_t show_rdac3(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sysfs_show_reg(dev, attr, buf, AD525X_I2C_RDAC | AD525X_RDAC3);
}
static ssize_t set_rdac3(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
return sysfs_set_reg(dev, attr, buf, count,
AD525X_I2C_RDAC | AD525X_RDAC3);
}
static DEVICE_ATTR(rdac3, S_IWUSR | S_IRUGO, show_rdac3, set_rdac3);
static ssize_t show_eeprom3(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sysfs_show_reg(dev, attr, buf, AD525X_I2C_EEPROM | AD525X_RDAC3);
}
static ssize_t set_eeprom3(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
return sysfs_set_reg(dev, attr, buf, count,
AD525X_I2C_EEPROM | AD525X_RDAC3);
}
static DEVICE_ATTR(eeprom3, S_IWUSR | S_IRUGO, show_eeprom3, set_eeprom3);
static ssize_t show_tolerance3(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sysfs_show_reg(dev, attr, buf,
AD525X_I2C_EEPROM | AD525X_TOL_RDAC3);
}
static DEVICE_ATTR(tolerance3, S_IRUGO, show_tolerance3, NULL);
static struct attribute *ad525x_attributes_wipers[4][4] = {
{
&dev_attr_rdac0.attr,
&dev_attr_eeprom0.attr,
&dev_attr_tolerance0.attr,
NULL
}, {
&dev_attr_rdac1.attr,
&dev_attr_eeprom1.attr,
&dev_attr_tolerance1.attr,
NULL
}, {
&dev_attr_rdac2.attr,
&dev_attr_eeprom2.attr,
&dev_attr_tolerance2.attr,
NULL
}, {
&dev_attr_rdac3.attr,
&dev_attr_eeprom3.attr,
&dev_attr_tolerance3.attr,
NULL
}
};
static const struct attribute_group ad525x_group_wipers[] = {
{.attrs = ad525x_attributes_wipers[AD525X_RDAC0]},
{.attrs = ad525x_attributes_wipers[AD525X_RDAC1]},
{.attrs = ad525x_attributes_wipers[AD525X_RDAC2]},
{.attrs = ad525x_attributes_wipers[AD525X_RDAC3]},
};
/* ------------------------------------------------------------------------- */
static ssize_t set_inc_all(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
return sysfs_do_cmd(dev, attr, buf, count, AD525X_INC_ALL);
}
static DEVICE_ATTR(inc_all, S_IWUSR, NULL, set_inc_all);
static ssize_t set_dec_all(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
return sysfs_do_cmd(dev, attr, buf, count, AD525X_DEC_ALL);
}
static DEVICE_ATTR(dec_all, S_IWUSR, NULL, set_dec_all);
static ssize_t set_inc_all_6db(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
return sysfs_do_cmd(dev, attr, buf, count, AD525X_INC_ALL_6DB);
}
static DEVICE_ATTR(inc_all_6db, S_IWUSR, NULL, set_inc_all_6db);
static ssize_t set_dec_all_6db(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
return sysfs_do_cmd(dev, attr, buf, count, AD525X_DEC_ALL_6DB);
}
static DEVICE_ATTR(dec_all_6db, S_IWUSR, NULL, set_dec_all_6db);
static struct attribute *ad525x_attributes_commands[] = {
&dev_attr_inc_all.attr,
&dev_attr_dec_all.attr,
&dev_attr_inc_all_6db.attr,
&dev_attr_dec_all_6db.attr,
NULL
};
static const struct attribute_group ad525x_group_commands = {
.attrs = ad525x_attributes_commands,
};
/* ------------------------------------------------------------------------- */
/* i2c device functions */
/**
* ad525x_read - return the value contained in the specified register
* on the AD5258 device.
* @client: value returned from i2c_new_device()
* @reg: the register to read
*
* If the tolerance register is specified, 2 bytes are returned.
* Otherwise, 1 byte is returned. A negative value indicates an error
* occurred while reading the register.
*/
static s32 ad525x_read(struct i2c_client *client, u8 reg)
{
struct dpot_data *data = i2c_get_clientdata(client);
if ((reg & AD525X_REG_TOL) || (data->max_pos > 256))
return i2c_smbus_read_word_data(client, (reg & 0xF8) |
((reg & 0x7) << 1));
else
return i2c_smbus_read_byte_data(client, reg);
}
/**
* ad525x_write - store the given value in the specified register on
* the AD5258 device.
* @client: value returned from i2c_new_device()
* @reg: the register to write
* @value: the byte to store in the register
*
* For certain instructions that do not require a data byte, "NULL"
* should be specified for the "value" parameter. These instructions
* include NOP, RESTORE_FROM_EEPROM, and STORE_TO_EEPROM.
*
* A negative return value indicates an error occurred while reading
* the register.
*/
static s32 ad525x_write(struct i2c_client *client, u8 reg, u8 value)
{
struct dpot_data *data = i2c_get_clientdata(client);
/* Only write the instruction byte for certain commands */
if (reg & AD525X_I2C_CMD)
return i2c_smbus_write_byte(client, reg);
if (data->max_pos > 256)
return i2c_smbus_write_word_data(client, (reg & 0xF8) |
((reg & 0x7) << 1), value);
else
/* All other registers require instruction + data bytes */
return i2c_smbus_write_byte_data(client, reg, value);
}
static int ad525x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
struct dpot_data *data;
int err = 0;
dev_dbg(dev, "%s\n", __func__);
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE)) {
dev_err(dev, "missing I2C functionality for this driver\n");
goto exit;
}
data = kzalloc(sizeof(struct dpot_data), GFP_KERNEL);
if (!data) {
err = -ENOMEM;
goto exit;
}
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
switch (id->driver_data) {
case AD5258_ID:
data->max_pos = AD5258_MAX_POSITION;
err = sysfs_create_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC0]);
break;
case AD5259_ID:
data->max_pos = AD5259_MAX_POSITION;
err = sysfs_create_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC0]);
break;
case AD5251_ID:
data->max_pos = AD5251_MAX_POSITION;
err = sysfs_create_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC1]);
err |= sysfs_create_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC3]);
err |= sysfs_create_group(&dev->kobj, &ad525x_group_commands);
break;
case AD5252_ID:
data->max_pos = AD5252_MAX_POSITION;
err = sysfs_create_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC1]);
err |= sysfs_create_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC3]);
err |= sysfs_create_group(&dev->kobj, &ad525x_group_commands);
break;
case AD5253_ID:
data->max_pos = AD5253_MAX_POSITION;
err = sysfs_create_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC0]);
err |= sysfs_create_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC1]);
err |= sysfs_create_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC2]);
err |= sysfs_create_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC3]);
err |= sysfs_create_group(&dev->kobj, &ad525x_group_commands);
break;
case AD5254_ID:
data->max_pos = AD5254_MAX_POSITION;
err = sysfs_create_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC0]);
err |= sysfs_create_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC1]);
err |= sysfs_create_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC2]);
err |= sysfs_create_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC3]);
err |= sysfs_create_group(&dev->kobj, &ad525x_group_commands);
break;
case AD5255_ID:
data->max_pos = AD5255_MAX_POSITION;
err = sysfs_create_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC0]);
err |= sysfs_create_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC1]);
err |= sysfs_create_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC2]);
err |= sysfs_create_group(&dev->kobj, &ad525x_group_commands);
break;
default:
err = -ENODEV;
goto exit_free;
}
if (err) {
dev_err(dev, "failed to register sysfs hooks\n");
goto exit_free;
}
data->devid = id->driver_data;
data->rdac_mask = data->max_pos - 1;
dev_info(dev, "%s %d-Position Digital Potentiometer registered\n",
id->name, data->max_pos);
return 0;
exit_free:
kfree(data);
i2c_set_clientdata(client, NULL);
exit:
dev_err(dev, "failed to create client\n");
return err;
}
static int __devexit ad525x_remove(struct i2c_client *client)
{
struct dpot_data *data = i2c_get_clientdata(client);
struct device *dev = &client->dev;
switch (data->devid) {
case AD5258_ID:
case AD5259_ID:
sysfs_remove_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC0]);
break;
case AD5251_ID:
case AD5252_ID:
sysfs_remove_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC1]);
sysfs_remove_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC3]);
sysfs_remove_group(&dev->kobj, &ad525x_group_commands);
break;
case AD5253_ID:
case AD5254_ID:
sysfs_remove_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC0]);
sysfs_remove_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC1]);
sysfs_remove_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC2]);
sysfs_remove_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC3]);
sysfs_remove_group(&dev->kobj, &ad525x_group_commands);
break;
case AD5255_ID:
sysfs_remove_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC0]);
sysfs_remove_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC1]);
sysfs_remove_group(&dev->kobj,
&ad525x_group_wipers[AD525X_RDAC2]);
sysfs_remove_group(&dev->kobj, &ad525x_group_commands);
break;
}
i2c_set_clientdata(client, NULL);
kfree(data);
return 0;
}
static const struct i2c_device_id ad525x_idtable[] = {
{"ad5258", AD5258_ID},
{"ad5259", AD5259_ID},
{"ad5251", AD5251_ID},
{"ad5252", AD5252_ID},
{"ad5253", AD5253_ID},
{"ad5254", AD5254_ID},
{"ad5255", AD5255_ID},
{}
};
MODULE_DEVICE_TABLE(i2c, ad525x_idtable);
static struct i2c_driver ad525x_driver = {
.driver = {
.owner = THIS_MODULE,
.name = DRIVER_NAME,
},
.id_table = ad525x_idtable,
.probe = ad525x_probe,
.remove = __devexit_p(ad525x_remove),
};
static int __init ad525x_init(void)
{
return i2c_add_driver(&ad525x_driver);
}
module_init(ad525x_init);
static void __exit ad525x_exit(void)
{
i2c_del_driver(&ad525x_driver);
}
module_exit(ad525x_exit);
MODULE_AUTHOR("Chris Verges <chrisv@cyberswitching.com>, "
"Michael Hennerich <hennerich@blackfin.uclinux.org>, ");
MODULE_DESCRIPTION("AD5258/9 digital potentiometer driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRIVER_VERSION);
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册