提交 4e990018 编写于 作者: F Felix Fietkau 提交者: John W. Linville

ath9k: remove sc->cur_rate_table and sc->cur_rate_mode

Set the rate table in the rc module properly based on band and
HT capabilities instead, which was already partially done, but
not for every mode.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 772d5515
......@@ -623,8 +623,6 @@ struct ath_softc {
struct ath_rx rx;
struct ath_tx tx;
struct ath_beacon beacon;
const struct ath_rate_table *cur_rate_table;
enum wireless_mode cur_rate_mode;
struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
struct ath_led radio_led;
......
......@@ -18,36 +18,6 @@
#include "ath9k.h"
#include "btcoex.h"
static void ath_cache_conf_rate(struct ath_softc *sc,
struct ieee80211_conf *conf)
{
switch (conf->channel->band) {
case IEEE80211_BAND_2GHZ:
if (conf_is_ht20(conf))
sc->cur_rate_mode = ATH9K_MODE_11NG_HT20;
else if (conf_is_ht40_minus(conf))
sc->cur_rate_mode = ATH9K_MODE_11NG_HT40MINUS;
else if (conf_is_ht40_plus(conf))
sc->cur_rate_mode = ATH9K_MODE_11NG_HT40PLUS;
else
sc->cur_rate_mode = ATH9K_MODE_11G;
break;
case IEEE80211_BAND_5GHZ:
if (conf_is_ht20(conf))
sc->cur_rate_mode = ATH9K_MODE_11NA_HT20;
else if (conf_is_ht40_minus(conf))
sc->cur_rate_mode = ATH9K_MODE_11NA_HT40MINUS;
else if (conf_is_ht40_plus(conf))
sc->cur_rate_mode = ATH9K_MODE_11NA_HT40PLUS;
else
sc->cur_rate_mode = ATH9K_MODE_11A;
break;
default:
BUG_ON(1);
break;
}
}
static void ath_update_txpow(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
......@@ -306,7 +276,6 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
goto ps_restore;
}
ath_cache_conf_rate(sc, &hw->conf);
ath_update_txpow(sc);
ath9k_hw_set_interrupts(ah, ah->imask);
......@@ -1013,8 +982,6 @@ int ath_reset(struct ath_softc *sc, bool retry_tx)
* that changes the channel so update any state that
* might change as a result.
*/
ath_cache_conf_rate(sc, &hw->conf);
ath_update_txpow(sc);
if ((sc->sc_flags & SC_OP_BEACONS) || !(sc->sc_flags & (SC_OP_OFFCHANNEL)))
......@@ -1221,8 +1188,6 @@ static int ath9k_start(struct ieee80211_hw *hw)
if (ah->caps.hw_caps & ATH9K_HW_CAP_HT)
ah->imask |= ATH9K_INT_CST;
ath_cache_conf_rate(sc, &hw->conf);
sc->sc_flags &= ~SC_OP_INVALID;
/* Disable BMISS interrupt when we're not associated */
......
......@@ -791,7 +791,7 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
*/
try_per_rate = 4;
rate_table = sc->cur_rate_table;
rate_table = ath_rc_priv->rate_table;
rix = ath_rc_get_highest_rix(sc, ath_rc_priv, rate_table, &is_probe);
/*
......@@ -1048,7 +1048,7 @@ static void ath_rc_update_ht(struct ath_softc *sc,
int rate;
u8 last_per;
bool state_change = false;
const struct ath_rate_table *rate_table = sc->cur_rate_table;
const struct ath_rate_table *rate_table = ath_rc_priv->rate_table;
int size = ath_rc_priv->rate_table_size;
if ((tx_rate < 0) || (tx_rate > rate_table->rate_cnt))
......@@ -1150,7 +1150,7 @@ static void ath_rc_tx_status(struct ath_softc *sc,
u8 flags;
u32 i = 0, rix;
rate_table = sc->cur_rate_table;
rate_table = ath_rc_priv->rate_table;
/*
* If the first rate is not the final index, there
......@@ -1231,7 +1231,6 @@ struct ath_rate_table *ath_choose_rate_table(struct ath_softc *sc,
ath_print(common, ATH_DBG_CONFIG,
"Choosing rate table for mode: %d\n", mode);
sc->cur_rate_mode = mode;
return hw_rate_table[mode];
}
......@@ -1303,7 +1302,6 @@ static void ath_rc_init(struct ath_softc *sc,
ath_rc_priv->max_valid_rate = k;
ath_rc_sort_validrates(rate_table, ath_rc_priv);
ath_rc_priv->rate_max_phy = ath_rc_priv->valid_rate_index[k-4];
sc->cur_rate_table = rate_table;
ath_rc_priv->rate_table = rate_table;
ath_print(common, ATH_DBG_CONFIG,
......@@ -1439,8 +1437,9 @@ static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband,
}
}
ath_debug_stat_rc(ath_rc_priv, ath_rc_get_rateindex(sc->cur_rate_table,
&tx_info->status.rates[final_ts_idx]));
ath_debug_stat_rc(ath_rc_priv,
ath_rc_get_rateindex(ath_rc_priv->rate_table,
&tx_info->status.rates[final_ts_idx]));
}
static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,
......@@ -1480,14 +1479,8 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,
/* Choose rate table first */
if ((sc->sc_ah->opmode == NL80211_IFTYPE_STATION) ||
(sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT) ||
(sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC)) {
rate_table = ath_choose_rate_table(sc, sband->band,
sta->ht_cap.ht_supported, is_cw40);
} else {
rate_table = hw_rate_table[sc->cur_rate_mode];
}
rate_table = ath_choose_rate_table(sc, sband->band,
sta->ht_cap.ht_supported, is_cw40);
ath_rc_priv->ht_cap = ath_rc_build_ht_caps(sc, sta, is_cw40, is_sgi);
ath_rc_init(sc, priv_sta, sband, sta, rate_table);
......@@ -1536,7 +1529,6 @@ static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband,
ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_CONFIG,
"Operating HT Bandwidth changed to: %d\n",
sc->hw->conf.channel_type);
sc->cur_rate_table = hw_rate_table[sc->cur_rate_mode];
}
}
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册