Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
大约 1 年 前同步成功

通知 158
Star 36
Fork 7
cloud-kernel
cloud-kernel

体验新版 GitCode，发现更多精彩内容 >>

提交 4e76c5cc 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6 

* git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6: (21 commits)
  xtensa: we don't need to include asm/io.h
  xtensa: only build platform or variant if they contain a Makefile
  xtensa: make startup code discardable
  xtensa: ccount clocksource
  xtensa: remove platform rtc hooks
  xtensa: use generic sched_clock()
  xtensa: platform: s6105
  xtensa: let platform override KERNELOFFSET
  xtensa: s6000 variant
  xtensa: s6000 variant core definitions
  xtensa: variant irq set callbacks
  xtensa: variant-specific code
  xtensa: nommu support
  xtensa: add flat support
  xtensa: enforce slab alignment to maximum register width
  xtensa: cope with ram beginning at higher addresses
  xtensa: don't make bootmem bitmap larger than required
  xtensa: fix init_bootmem_node() argument order
  xtensa: use correct stack pointer for stack traces
  xtensa: beat Kconfig into shape
  ...
上级 b9834717 65127d28
隐藏空白更改
内联 并排
Showing with 2466 addition and 306 deletion
arch/xtensa/Kconfig
浏览文件 @ 4e76c5cc
......@@ -4,16 +4,13 @@
mainmenu "Linux/Xtensa Kernel Configuration"
config FRAME_POINTER
bool
default n
def_bool n
config ZONE_DMA
bool
default y
def_bool y
config XTENSA
bool
default y
def_bool y
select HAVE_IDE
help
Xtensa processors are 32-bit RISC machines designed by Tensilica
......@@ -24,28 +21,25 @@ config XTENSA
a home page at <http://xtensa.sourceforge.net/>.
config RWSEM_XCHGADD_ALGORITHM
bool
default y
def_bool y
config GENERIC_FIND_NEXT_BIT
bool
default y
def_bool y
config GENERIC_HWEIGHT
bool
default y
def_bool y
config GENERIC_HARDIRQS
bool
default y
def_bool y
config GENERIC_GPIO
def_bool y
config ARCH_HAS_ILOG2_U32
bool
default n
def_bool n
config ARCH_HAS_ILOG2_U64
bool
default n
def_bool n
config NO_IOPORT
def_bool y
......@@ -54,9 +48,18 @@ config HZ
int
default 100
config GENERIC_TIME
def_bool y
source "init/Kconfig"
source "kernel/Kconfig.freezer"
config MMU
def_bool n
config VARIANT_IRQ_SWITCH
def_bool n
menu "Processor type and features"
choice
......@@ -65,38 +68,41 @@ choice
config XTENSA_VARIANT_FSF
bool "fsf - default (not generic) configuration"
select MMU
config XTENSA_VARIANT_DC232B
bool "dc232b - Diamond 232L Standard Core Rev.B (LE)"
select MMU
help
This variant refers to Tensilica's Diamond 232L Standard core Rev.B (LE).
endchoice
This variant refers to Tensilica's Diamond 232L Standard core Rev.B (LE).
config MMU
bool
default y
config XTENSA_VARIANT_S6000
bool "s6000 - Stretch software configurable processor"
select VARIANT_IRQ_SWITCH
select ARCH_REQUIRE_GPIOLIB
endchoice
config XTENSA_UNALIGNED_USER
bool "Unaligned memory access in use space"
---help---
The Xtensa architecture currently does not handle unaligned
memory accesses in hardware but through an exception handler.
Per default, unaligned memory accesses are disabled in user space.
help
The Xtensa architecture currently does not handle unaligned
memory accesses in hardware but through an exception handler.
Per default, unaligned memory accesses are disabled in user space.
Say Y here to enable unaligned memory access in user space.
Say Y here to enable unaligned memory access in user space.
config PREEMPT
bool "Preemptible Kernel"
---help---
This option reduces the latency of the kernel when reacting to
real-time or interactive events by allowing a low priority process to
be preempted even if it is in kernel mode executing a system call.
Unfortunately the kernel code has some race conditions if both
CONFIG_SMP and CONFIG_PREEMPT are enabled, so this option is
currently disabled if you are building an SMP kernel.
help
This option reduces the latency of the kernel when reacting to
real-time or interactive events by allowing a low priority process to
be preempted even if it is in kernel mode executing a system call.
Unfortunately the kernel code has some race conditions if both
CONFIG_SMP and CONFIG_PREEMPT are enabled, so this option is
currently disabled if you are building an SMP kernel.
Say Y here if you are building a kernel for a desktop, embedded
or real-time system. Say N if you are unsure.
Say Y here if you are building a kernel for a desktop, embedded
or real-time system. Say N if you are unsure.
config MATH_EMULATION
bool "Math emulation"
......@@ -105,6 +111,32 @@ config MATH_EMULATION
endmenu
config XTENSA_CALIBRATE_CCOUNT
def_bool n
help
On some platforms (XT2000, for example), the CPU clock rate can
vary. The frequency can be determined, however, by measuring
against a well known, fixed frequency, such as an UART oscillator.
config SERIAL_CONSOLE
def_bool n
config XTENSA_ISS_NETWORK
def_bool n
menu "Bus options"
config PCI
bool "PCI support"
default y
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
VESA. If you have PCI, say Y, otherwise N.
source "drivers/pci/Kconfig"
menu "Platform options"
choice
......@@ -113,33 +145,35 @@ choice
config XTENSA_PLATFORM_ISS
bool "ISS"
select XTENSA_CALIBRATE_CCOUNT
select SERIAL_CONSOLE
select XTENSA_ISS_NETWORK
help
ISS is an acronym for Tensilica's Instruction Set Simulator.
config XTENSA_PLATFORM_XT2000
bool "XT2000"
select XTENSA_CALIBRATE_CCOUNT
select PCI
help
XT2000 is the name of Tensilica's feature-rich emulation platform.
This hardware is capable of running a full Linux distribution.
endchoice
config XTENSA_PLATFORM_S6105
bool "S6105"
select SERIAL_CONSOLE
endchoice
config XTENSA_CALIBRATE_CCOUNT
bool "Auto calibration of the CPU clock rate"
---help---
On some platforms (XT2000, for example), the CPU clock rate can
vary. The frequency can be determined, however, by measuring
against a well known, fixed frequency, such as an UART oscillator.
config XTENSA_CPU_CLOCK
int "CPU clock rate [MHz]"
depends on !XTENSA_CALIBRATE_CCOUNT
default "16"
default 16
config GENERIC_CALIBRATE_DELAY
bool "Auto calibration of the BogoMIPS value"
---help---
help
The BogoMIPS value can easily be derived from the CPU frequency.
config CMDLINE_BOOL
......@@ -156,52 +190,27 @@ config CMDLINE
time by entering them here. As a minimum, you should specify the
memory size and the root device (e.g., mem=64M root=/dev/nfs).
config SERIAL_CONSOLE
bool
depends on XTENSA_PLATFORM_ISS
default y
config XTENSA_ISS_NETWORK
bool
depends on XTENSA_PLATFORM_ISS
default y
source "mm/Kconfig"
endmenu
menu "Bus options"
config PCI
bool "PCI support" if !XTENSA_PLATFORM_ISS
depends on !XTENSA_PLATFORM_ISS
default y
config HOTPLUG
bool "Support for hot-pluggable devices"
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
VESA. If you have PCI, say Y, otherwise N.
Say Y here if you want to plug devices into your computer while
the system is running, and be able to use them quickly. In many
cases, the devices can likewise be unplugged at any time too.
source "drivers/pci/Kconfig"
One well known example of this is PCMCIA- or PC-cards, credit-card
size devices such as network cards, modems or hard drives which are
plugged into slots found on all modern laptop computers. Another
example, used on modern desktops as well as laptops, is USB.
config HOTPLUG
bool "Support for hot-pluggable devices"
---help---
Say Y here if you want to plug devices into your computer while
the system is running, and be able to use them quickly. In many
cases, the devices can likewise be unplugged at any time too.
One well known example of this is PCMCIA- or PC-cards, credit-card
size devices such as network cards, modems or hard drives which are
plugged into slots found on all modern laptop computers. Another
example, used on modern desktops as well as laptops, is USB.
Enable HOTPLUG and build a modular kernel. Get agent software
(from <http://linux-hotplug.sourceforge.net/>) and install it.
Then your kernel will automatically call out to a user mode "policy
agent" (/sbin/hotplug) to load modules and set up software needed
to use devices as you hotplug them.
Enable HOTPLUG and build a modular kernel. Get agent software
(from <http://linux-hotplug.sourceforge.net/>) and install it.
Then your kernel will automatically call out to a user mode "policy
agent" (/sbin/hotplug) to load modules and set up software needed
to use devices as you hotplug them.
source "drivers/pcmcia/Kconfig"
......@@ -213,9 +222,8 @@ menu "Executable file formats"
# only elf supported
config KCORE_ELF
bool
def_bool y
depends on PROC_FS
default y
help
If you enabled support for /proc file system then the file
/proc/kcore will contain the kernel core image in ELF format. This
......@@ -240,7 +248,7 @@ source "fs/Kconfig"
menu "Xtensa initrd options"
depends on BLK_DEV_INITRD
config EMBEDDED_RAMDISK
config EMBEDDED_RAMDISK
bool "Embed root filesystem ramdisk into the kernel"
config EMBEDDED_RAMDISK_IMAGE
......
arch/xtensa/Makefile
浏览文件 @ 4e76c5cc
......@@ -15,6 +15,7 @@
variant-$(CONFIG_XTENSA_VARIANT_FSF) := fsf
variant-$(CONFIG_XTENSA_VARIANT_DC232B) := dc232b
variant-$(CONFIG_XTENSA_VARIANT_S6000) := s6000
variant-$(CONFIG_XTENSA_VARIANT_LINUX_CUSTOM) := custom
VARIANT = $(variant-y)
......@@ -24,6 +25,7 @@ export VARIANT
platform-$(CONFIG_XTENSA_PLATFORM_XT2000) := xt2000
platform-$(CONFIG_XTENSA_PLATFORM_ISS) := iss
platform-$(CONFIG_XTENSA_PLATFORM_S6105) := s6105
PLATFORM = $(platform-y)
export PLATFORM
......@@ -62,20 +64,23 @@ ifneq ($(VARIANT),)
endif
endif
#
# Only build variant and/or platform if it includes a Makefile
buildvar := $(shell test -a $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/)
buildplf := $(shell test -a $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/)
# Find libgcc.a
LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
head-y := arch/xtensa/kernel/head.o
core-y += arch/xtensa/kernel/ arch/xtensa/mm/
ifneq ($(PLATFORM),)
core-y += arch/xtensa/platforms/$(PLATFORM)/
endif
core-y += $(buildvar) $(buildplf)
libs-y += arch/xtensa/lib/ $(LIBGCC)
boot := arch/xtensa/boot
all: zImage
bzImage : zImage
......
arch/xtensa/configs/s6105_defconfig 0 → 100644
浏览文件 @ 4e76c5cc
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29-rc7-s6
# Tue Mar 10 11:09:26 2009
#
# CONFIG_FRAME_POINTER is not set
CONFIG_ZONE_DMA=y
CONFIG_XTENSA=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_NO_IOPORT=y
CONFIG_HZ=100
CONFIG_GENERIC_TIME=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
# CONFIG_CLASSIC_RCU is not set
# CONFIG_TREE_RCU is not set
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_FREEZER is not set
# CONFIG_MMU is not set
CONFIG_VARIANT_IRQ_SWITCH=y
#
# Processor type and features
#
# CONFIG_XTENSA_VARIANT_FSF is not set
# CONFIG_XTENSA_VARIANT_DC232B is not set
CONFIG_XTENSA_VARIANT_S6000=y
# CONFIG_XTENSA_UNALIGNED_USER is not set
CONFIG_PREEMPT=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_HIGHMEM is not set
# CONFIG_XTENSA_CALIBRATE_CCOUNT is not set
CONFIG_SERIAL_CONSOLE=y
# CONFIG_XTENSA_ISS_NETWORK is not set
#
# Bus options
#
# CONFIG_PCI is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# Platform options
#
# CONFIG_XTENSA_PLATFORM_ISS is not set
# CONFIG_XTENSA_PLATFORM_XT2000 is not set
CONFIG_XTENSA_PLATFORM_S6105=y
CONFIG_XTENSA_CPU_CLOCK=300
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS1,38400 debug bootmem_debug loglevel=7"
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
#
# Executable file formats
#
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_FLAT=y
# CONFIG_BINFMT_ZFLAT is not set
# CONFIG_BINFMT_SHARED_FLAT is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
#
# Networking options
#
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_NETDEVICES is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
#
# Memory mapped GPIO expanders:
#
#
# I2C GPIO expanders:
#
#
# PCI GPIO expanders:
#
#
# SPI GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
#
# Xtensa initrd options
#
# CONFIG_EMBEDDED_RAMDISK is not set
#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_NOMMU_REGIONS=y
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
#
# Tracers
#
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
arch/xtensa/include/asm/cacheflush.h
浏览文件 @ 4e76c5cc
......@@ -65,13 +65,17 @@ extern void __flush_invalidate_dcache_range(unsigned long, unsigned long);
# define __flush_invalidate_dcache_range(p,s) __invalidate_dcache_range(p,s)
#endif
#if (DCACHE_WAY_SIZE > PAGE_SIZE)
#if defined(CONFIG_MMU) && (DCACHE_WAY_SIZE > PAGE_SIZE)
extern void __flush_invalidate_dcache_page_alias(unsigned long, unsigned long);
#else
static inline void __flush_invalidate_dcache_page_alias(unsigned long virt,
unsigned long phys) { }
#endif
#if (ICACHE_WAY_SIZE > PAGE_SIZE)
#if defined(CONFIG_MMU) && (ICACHE_WAY_SIZE > PAGE_SIZE)
extern void __invalidate_icache_page_alias(unsigned long, unsigned long);
#else
# define __invalidate_icache_page_alias(v,p) do { } while(0)
static inline void __invalidate_icache_page_alias(unsigned long virt,
unsigned long phys) { }
#endif
/*
......
arch/xtensa/include/asm/dma.h
浏览文件 @ 4e76c5cc
......@@ -44,8 +44,9 @@
* the value desired).
*/
#ifndef MAX_DMA_ADDRESS
#define MAX_DMA_ADDRESS (PAGE_OFFSET + XCHAL_KIO_SIZE - 1)
#endif
/* Reserve and release a DMA channel */
extern int request_dma(unsigned int dmanr, const char * device_id);
......
arch/xtensa/include/asm/flat.h 0 → 100644
浏览文件 @ 4e76c5cc
#ifndef __ASM_XTENSA_FLAT_H
#define __ASM_XTENSA_FLAT_H
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
#define flat_get_addr_from_rp(rp, relval, flags, p) get_unaligned(rp)
#define flat_put_addr_at_rp(rp, val, relval ) put_unaligned(val, rp)
#define flat_get_relocate_addr(rel) (rel)
#define flat_set_persistent(relval, p) 0
#endif /* __ASM_XTENSA_FLAT_H */
arch/xtensa/include/asm/gpio.h 0 → 100644
浏览文件 @ 4e76c5cc
/*
* Generic GPIO API implementation for xtensa.
*
* Stolen from x86, which is derived from the generic GPIO API for powerpc:
*
* Copyright (c) 2007-2008 MontaVista Software, Inc.
*
* Author: Anton Vorontsov <avorontsov@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef _ASM_XTENSA_GPIO_H
#define _ASM_XTENSA_GPIO_H
#include <asm-generic/gpio.h>
#ifdef CONFIG_GPIOLIB
/*
* Just call gpiolib.
*/
static inline int gpio_get_value(unsigned int gpio)
{
return __gpio_get_value(gpio);
}
static inline void gpio_set_value(unsigned int gpio, int value)
{
__gpio_set_value(gpio, value);
}
static inline int gpio_cansleep(unsigned int gpio)
{
return __gpio_cansleep(gpio);
}
/*
* Not implemented, yet.
*/
static inline int gpio_to_irq(unsigned int gpio)
{
return -ENOSYS;
}
static inline int irq_to_gpio(unsigned int irq)
{
return -EINVAL;
}
#endif /* CONFIG_GPIOLIB */
#endif /* _ASM_XTENSA_GPIO_H */
arch/xtensa/include/asm/io.h
浏览文件 @ 4e76c5cc
......@@ -69,21 +69,28 @@ static inline void * phys_to_virt(unsigned long address)
static inline void *ioremap(unsigned long offset, unsigned long size)
{
#ifdef CONFIG_MMU
if (offset >= XCHAL_KIO_PADDR
&& offset < XCHAL_KIO_PADDR + XCHAL_KIO_SIZE)
return (void*)(offset-XCHAL_KIO_PADDR+XCHAL_KIO_BYPASS_VADDR);
else
BUG();
#else
return (void *)offset;
#endif
}
static inline void *ioremap_nocache(unsigned long offset, unsigned long size)
{
#ifdef CONFIG_MMU
if (offset >= XCHAL_KIO_PADDR
&& offset < XCHAL_KIO_PADDR + XCHAL_KIO_SIZE)
return (void*)(offset-XCHAL_KIO_PADDR+XCHAL_KIO_CACHED_VADDR);
else
BUG();
#else
return (void *)offset;
#endif
}
static inline void iounmap(void *addr)
......
arch/xtensa/include/asm/irq.h
浏览文件 @ 4e76c5cc
......@@ -14,6 +14,13 @@
#include <platform/hardware.h>
#include <variant/core.h>
#ifdef CONFIG_VARIANT_IRQ_SWITCH
#include <variant/irq.h>
#else
static inline void variant_irq_enable(unsigned int irq) { }
static inline void variant_irq_disable(unsigned int irq) { }
#endif
#ifndef PLATFORM_NR_IRQS
# define PLATFORM_NR_IRQS 0
#endif
......
arch/xtensa/include/asm/mmu.h
浏览文件 @ 4e76c5cc
......@@ -11,7 +11,12 @@
#ifndef _XTENSA_MMU_H
#define _XTENSA_MMU_H
#ifndef CONFIG_MMU
#include <asm/nommu.h>
#else
/* Default "unsigned long" context */
typedef unsigned long mm_context_t;
#endif /* CONFIG_MMU */
#endif /* _XTENSA_MMU_H */
arch/xtensa/include/asm/mmu_context.h
浏览文件 @ 4e76c5cc
......@@ -13,16 +13,20 @@
#ifndef _XTENSA_MMU_CONTEXT_H
#define _XTENSA_MMU_CONTEXT_H
#ifndef CONFIG_MMU
#include <asm/nommu_context.h>
#else
#include <linux/stringify.h>
#include <linux/sched.h>
#include <variant/core.h>
#include <asm/pgtable.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <asm-generic/mm_hooks.h>
#define XCHAL_MMU_ASID_BITS 8
#if (XCHAL_HAVE_TLBS != 1)
# error "Linux must have an MMU!"
#endif
......@@ -133,4 +137,5 @@ static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
}
#endif /* CONFIG_MMU */
#endif /* _XTENSA_MMU_CONTEXT_H */
arch/xtensa/include/asm/nommu.h 0 → 100644
浏览文件 @ 4e76c5cc
typedef struct {
unsigned long end_brk;
} mm_context_t;
arch/xtensa/include/asm/nommu_context.h 0 → 100644
浏览文件 @ 4e76c5cc
static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
{
}
static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
{
return 0;
}
static inline void destroy_context(struct mm_struct *mm)
{
}
static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
{
}
static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
struct task_struct *tsk)
{
}
static inline void deactivate_mm(struct task_struct *tsk, struct mm_struct *mm)
{
}
arch/xtensa/include/asm/page.h
浏览文件 @ 4e76c5cc
......@@ -14,6 +14,7 @@
#include <asm/processor.h>
#include <asm/types.h>
#include <asm/cache.h>
#include <platform/hardware.h>
/*
* Fixed TLB translations in the processor.
......@@ -32,8 +33,14 @@
#define PAGE_SIZE (__XTENSA_UL_CONST(1) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
#ifdef CONFIG_MMU
#define PAGE_OFFSET XCHAL_KSEG_CACHED_VADDR
#define MAX_MEM_PFN XCHAL_KSEG_SIZE
#else
#define PAGE_OFFSET 0
#define MAX_MEM_PFN (PLATFORM_DEFAULT_MEM_START + PLATFORM_DEFAULT_MEM_SIZE)
#endif
#define PGTABLE_START 0x80000000
/*
......@@ -150,9 +157,11 @@ extern void copy_user_page(void*, void*, unsigned long, struct page*);
* addresses.
*/
#define ARCH_PFN_OFFSET (PLATFORM_DEFAULT_MEM_START >> PAGE_SHIFT)
#define __pa(x) ((unsigned long) (x) - PAGE_OFFSET)
#define __va(x) ((void *)((unsigned long) (x) + PAGE_OFFSET))
#define pfn_valid(pfn) ((unsigned long)pfn < max_mapnr)
#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && ((pfn) - ARCH_PFN_OFFSET) < max_mapnr)
#ifdef CONFIG_DISCONTIGMEM
# error CONFIG_DISCONTIGMEM not supported
#endif
......@@ -162,8 +171,9 @@ extern void copy_user_page(void*, void*, unsigned long, struct page*);
#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
#ifdef CONFIG_MMU
#define WANT_PAGE_VIRTUAL
#endif
#endif /* __ASSEMBLY__ */
......
arch/xtensa/include/asm/pgtable.h
浏览文件 @ 4e76c5cc
......@@ -183,7 +183,15 @@ extern unsigned long empty_zero_page[1024];
#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
#ifdef CONFIG_MMU
extern pgd_t swapper_pg_dir[PAGE_SIZE/sizeof(pgd_t)];
extern void paging_init(void);
extern void pgtable_cache_init(void);
#else
# define swapper_pg_dir NULL
static inline void paging_init(void) { }
static inline void pgtable_cache_init(void) { }
#endif
/*
* The pmd contains the kernel virtual address of the pte page.
......@@ -383,8 +391,6 @@ ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
#else
extern void paging_init(void);
#define kern_addr_valid(addr) (1)
extern void update_mmu_cache(struct vm_area_struct * vma,
......@@ -398,9 +404,6 @@ extern void update_mmu_cache(struct vm_area_struct * vma,
#define io_remap_pfn_range(vma,from,pfn,size,prot) \
remap_pfn_range(vma, from, pfn, size, prot)
extern void pgtable_cache_init(void);
typedef pte_t *pte_addr_t;
#endif /* !defined (__ASSEMBLY__) */
......
arch/xtensa/include/asm/platform.h
浏览文件 @ 4e76c5cc
......@@ -74,16 +74,5 @@ extern int platform_pcibios_fixup (void);
*/
extern void platform_calibrate_ccount (void);
/*
* platform_get_rtc_time returns RTC seconds (returns 0 for no error)
*/
extern int platform_get_rtc_time(time_t*);
/*
* platform_set_rtc_time set RTC seconds (returns 0 for no error)
*/
extern int platform_set_rtc_time(time_t);
#endif /* _XTENSA_PLATFORM_H */
arch/xtensa/include/asm/processor.h
浏览文件 @ 4e76c5cc
......@@ -13,6 +13,7 @@
#include <variant/core.h>
#include <asm/coprocessor.h>
#include <platform/hardware.h>
#include <linux/compiler.h>
#include <asm/ptrace.h>
......@@ -25,6 +26,8 @@
# error Linux requires the Xtensa Windowed Registers Option.
#endif
#define ARCH_SLAB_MINALIGN XCHAL_DATA_WIDTH
/*
* User space process size: 1 GB.
* Windowed call ABI requires caller and callee to be located within the same
......@@ -33,7 +36,12 @@
* the 1 GB requirement applies to the stack as well.
*/
#ifdef CONFIG_MMU
#define TASK_SIZE __XTENSA_UL_CONST(0x40000000)
#else
#define TASK_SIZE (PLATFORM_DEFAULT_MEM_START + PLATFORM_DEFAULT_MEM_SIZE)
#endif
#define STACK_TOP TASK_SIZE
#define STACK_TOP_MAX STACK_TOP
......
arch/xtensa/kernel/entry.S
浏览文件 @ 4e76c5cc
......@@ -1463,6 +1463,7 @@ ENTRY(_spill_registers)
callx0 a0 # should not return
1: j 1b
#ifdef CONFIG_MMU
/*
* We should never get here. Bail out!
*/
......@@ -1775,7 +1776,7 @@ ENTRY(fast_store_prohibited)
bbsi.l a2, PS_UM_BIT, 1f
j _kernel_exception
1: j _user_exception
#endif /* CONFIG_MMU */
/*
* System Calls.
......
arch/xtensa/kernel/head.S
浏览文件 @ 4e76c5cc
......@@ -53,7 +53,7 @@ _start: _j 2f
2: l32r a0, 1b
jx a0
.text
.section .init.text, "ax"
.align 4
_startup:
......@@ -235,8 +235,9 @@ should_never_return:
*/
.section ".bss.page_aligned", "w"
#ifdef CONFIG_MMU
ENTRY(swapper_pg_dir)
.fill PAGE_SIZE, 1, 0
#endif
ENTRY(empty_zero_page)
.fill PAGE_SIZE, 1, 0
arch/xtensa/kernel/irq.c
浏览文件 @ 4e76c5cc
......@@ -132,6 +132,18 @@ static void xtensa_irq_unmask(unsigned int irq)
set_sr (cached_irq_mask, INTENABLE);
}
static void xtensa_irq_enable(unsigned int irq)
{
variant_irq_enable(irq);
xtensa_irq_unmask(irq);
}
static void xtensa_irq_disable(unsigned int irq)
{
xtensa_irq_mask(irq);
variant_irq_disable(irq);
}
static void xtensa_irq_ack(unsigned int irq)
{
set_sr(1 << irq, INTCLEAR);
......@@ -146,6 +158,8 @@ static int xtensa_irq_retrigger(unsigned int irq)
static struct irq_chip xtensa_irq_chip = {
.name = "xtensa",
.enable = xtensa_irq_enable,
.disable = xtensa_irq_disable,
.mask = xtensa_irq_mask,
.unmask = xtensa_irq_unmask,
.ack = xtensa_irq_ack,
......
arch/xtensa/kernel/platform.c
浏览文件 @ 4e76c5cc
......@@ -36,8 +36,6 @@ _F(void, power_off, (void), { while(1); });
_F(void, idle, (void), { __asm__ __volatile__ ("waiti 0" ::: "memory"); });
_F(void, heartbeat, (void), { });
_F(int, pcibios_fixup, (void), { return 0; });
_F(int, get_rtc_time, (time_t* t), { return 0; });
_F(int, set_rtc_time, (time_t t), { return 0; });
#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
_F(void, calibrate_ccount, (void),
......
arch/xtensa/kernel/setup.c
浏览文件 @ 4e76c5cc
......@@ -84,7 +84,13 @@ sysmem_info_t __initdata sysmem;
int initrd_is_mapped;
#endif
#ifdef CONFIG_MMU
extern void init_mmu(void);
#else
static inline void init_mmu(void) { }
#endif
extern void zones_init(void);
/*
* Boot parameter parsing.
......@@ -286,6 +292,7 @@ void __init setup_arch(char **cmdline_p)
paging_init();
zones_init();
#ifdef CONFIG_VT
# if defined(CONFIG_VGA_CONSOLE)
......
arch/xtensa/kernel/time.c
浏览文件 @ 4e76c5cc
......@@ -14,7 +14,7 @@
#include <linux/errno.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/clocksource.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/init.h>
......@@ -25,27 +25,31 @@
#include <asm/timex.h>
#include <asm/platform.h>
DEFINE_SPINLOCK(rtc_lock);
EXPORT_SYMBOL(rtc_lock);
#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
unsigned long ccount_per_jiffy; /* per 1/HZ */
unsigned long nsec_per_ccount; /* nsec per ccount increment */
#endif
static long last_rtc_update = 0;
/*
* Scheduler clock - returns current tim in nanosec units.
*/
unsigned long long sched_clock(void)
static cycle_t ccount_read(void)
{
return (unsigned long long)jiffies * (1000000000 / HZ);
return (cycle_t)get_ccount();
}
static struct clocksource ccount_clocksource = {
.name = "ccount",
.rating = 200,
.read = ccount_read,
.mask = CLOCKSOURCE_MASK(32),
/*
* With a shift of 22 the lower limit of the cpu clock is
* 1MHz, where NSEC_PER_CCOUNT is 1000 or a bit less than
* 2^10: Since we have 32 bits and the multiplicator can
* already take up as much as 10 bits, this leaves us with
* remaining upper 22 bits.
*/
.shift = 22,
};
static irqreturn_t timer_interrupt(int irq, void *dev_id);
static struct irqaction timer_irqaction = {
.handler = timer_interrupt,
......@@ -55,11 +59,11 @@ static struct irqaction timer_irqaction = {
void __init time_init(void)
{
time_t sec_o, sec_n = 0;
xtime.tv_nsec = 0;
xtime.tv_sec = read_persistent_clock();
/* The platform must provide a function to calibrate the processor
* speed for the CALIBRATE.
*/
set_normalized_timespec(&wall_to_monotonic,
-xtime.tv_sec, -xtime.tv_nsec);
#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
printk("Calibrating CPU frequency ");
......@@ -67,19 +71,10 @@ void __init time_init(void)
printk("%d.%02d MHz\n", (int)ccount_per_jiffy/(1000000/HZ),
(int)(ccount_per_jiffy/(10000/HZ))%100);
#endif
/* Set time from RTC (if provided) */
if (platform_get_rtc_time(&sec_o) == 0)
while (platform_get_rtc_time(&sec_n))
if (sec_o != sec_n)
break;
xtime.tv_nsec = 0;
last_rtc_update = xtime.tv_sec = sec_n;
set_normalized_timespec(&wall_to_monotonic,
-xtime.tv_sec, -xtime.tv_nsec);
ccount_clocksource.mult =
clocksource_hz2mult(CCOUNT_PER_JIFFY * HZ,
ccount_clocksource.shift);
clocksource_register(&ccount_clocksource);
/* Initialize the linux timer interrupt. */
......@@ -87,69 +82,6 @@ void __init time_init(void)
set_linux_timer(get_ccount() + CCOUNT_PER_JIFFY);
}
int do_settimeofday(struct timespec *tv)
{
time_t wtm_sec, sec = tv->tv_sec;
long wtm_nsec, nsec = tv->tv_nsec;
unsigned long delta;
if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
return -EINVAL;
write_seqlock_irq(&xtime_lock);
/* This is revolting. We need to set "xtime" correctly. However, the
* value in this location is the value at the most recent update of
* wall time. Discover what correction gettimeofday() would have
* made, and then undo it!
*/
delta = CCOUNT_PER_JIFFY;
delta += get_ccount() - get_linux_timer();
nsec -= delta * NSEC_PER_CCOUNT;
wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
set_normalized_timespec(&xtime, sec, nsec);
set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
ntp_clear();
write_sequnlock_irq(&xtime_lock);
return 0;
}
EXPORT_SYMBOL(do_settimeofday);
void do_gettimeofday(struct timeval *tv)
{
unsigned long flags;
unsigned long volatile sec, usec, delta, seq;
do {
seq = read_seqbegin_irqsave(&xtime_lock, flags);
sec = xtime.tv_sec;
usec = (xtime.tv_nsec / NSEC_PER_USEC);
delta = get_linux_timer() - get_ccount();
} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
usec += (((unsigned long) CCOUNT_PER_JIFFY - delta)
* (unsigned long) NSEC_PER_CCOUNT) / NSEC_PER_USEC;
for (; usec >= 1000000; sec++, usec -= 1000000)
;
tv->tv_sec = sec;
tv->tv_usec = usec;
}
EXPORT_SYMBOL(do_gettimeofday);
/*
* The timer interrupt is called HZ times per second.
*/
......@@ -178,16 +110,6 @@ irqreturn_t timer_interrupt (int irq, void *dev_id)
next += CCOUNT_PER_JIFFY;
set_linux_timer(next);
if (ntp_synced() &&
xtime.tv_sec - last_rtc_update >= 659 &&
abs((xtime.tv_nsec/1000)-(1000000-1000000/HZ))<5000000/HZ) {
if (platform_set_rtc_time(xtime.tv_sec+1) == 0)
last_rtc_update = xtime.tv_sec+1;
else
/* Do it again in 60 s */
last_rtc_update += 60;
}
write_sequnlock(&xtime_lock);
}
......@@ -213,4 +135,3 @@ void __cpuinit calibrate_delay(void)
(loops_per_jiffy/(10000/HZ)) % 100);
}
#endif
arch/xtensa/kernel/traps.c
浏览文件 @ 4e76c5cc
......@@ -104,6 +104,7 @@ static dispatch_init_table_t __initdata dispatch_init_table[] = {
#endif
{ EXCCAUSE_UNALIGNED, KRNL, fast_unaligned },
#endif
#ifdef CONFIG_MMU
{ EXCCAUSE_ITLB_MISS, 0, do_page_fault },
{ EXCCAUSE_ITLB_MISS, USER|KRNL, fast_second_level_miss},
{ EXCCAUSE_ITLB_MULTIHIT, 0, do_multihit },
......@@ -118,6 +119,7 @@ static dispatch_init_table_t __initdata dispatch_init_table[] = {
{ EXCCAUSE_STORE_CACHE_ATTRIBUTE, USER|KRNL, fast_store_prohibited },
{ EXCCAUSE_STORE_CACHE_ATTRIBUTE, 0, do_page_fault },
{ EXCCAUSE_LOAD_CACHE_ATTRIBUTE, 0, do_page_fault },
#endif /* CONFIG_MMU */
/* XCCHAL_EXCCAUSE_FLOATING_POINT unhandled */
#if XTENSA_HAVE_COPROCESSOR(0)
COPROCESSOR(0),
......@@ -372,11 +374,10 @@ void show_trace(struct task_struct *task, unsigned long *sp)
unsigned long a0, a1, pc;
unsigned long sp_start, sp_end;
a1 = (unsigned long)sp;
if (a1 == 0)
__asm__ __volatile__ ("mov %0, a1\n" : "=a"(a1));
if (sp)
a1 = (unsigned long)sp;
else
a1 = task->thread.sp;
sp_start = a1 & ~(THREAD_SIZE-1);
sp_end = sp_start + THREAD_SIZE;
......@@ -418,9 +419,8 @@ void show_stack(struct task_struct *task, unsigned long *sp)
int i = 0;
unsigned long *stack;
if (sp == 0)
__asm__ __volatile__ ("mov %0, a1\n" : "=a"(sp));
if (!sp)
sp = (unsigned long *)task->thread.sp;
stack = sp;
printk("\nStack: ");
......
arch/xtensa/kernel/vectors.S
浏览文件 @ 4e76c5cc
......@@ -309,6 +309,7 @@ ENTRY(_DoubleExceptionVector)
* All other exceptions are unexpected and thus unrecoverable!
*/
#ifdef CONFIG_MMU
.extern fast_second_level_miss_double_kernel
.Lksp: /* a0: a0, a1: a1, a2: a2, a3: trashed, depc: depc, excsave: a3 */
......@@ -319,6 +320,9 @@ ENTRY(_DoubleExceptionVector)
bnez a3, .Lunrecoverable
1: movi a3, fast_second_level_miss_double_kernel
jx a3
#else
.equ .Lksp, .Lunrecoverable
#endif
/* Critical! We can't handle this situation. PANIC! */
......
arch/xtensa/kernel/vmlinux.lds.S
浏览文件 @ 4e76c5cc
......@@ -17,6 +17,7 @@
#include <asm-generic/vmlinux.lds.h>
#include <variant/core.h>
#include <platform/hardware.h>
OUTPUT_ARCH(xtensa)
ENTRY(_start)
......@@ -26,7 +27,9 @@ jiffies = jiffies_64 + 4;
jiffies = jiffies_64;
#endif
#ifndef KERNELOFFSET
#define KERNELOFFSET 0xd0001000
#endif
/* Note: In the following macros, it would be nice to specify only the
vector name and section kind and construct "sym" and "section" using
......
arch/xtensa/mm/Makefile
浏览文件 @ 4e76c5cc
......@@ -2,4 +2,5 @@
# Makefile for the Linux/Xtensa-specific parts of the memory manager.
#
obj-y := init.o fault.o tlb.o misc.o cache.o
obj-y := init.o cache.o misc.o
obj-$(CONFIG_MMU) += fault.o mmu.o tlb.o
arch/xtensa/mm/init.c
浏览文件 @ 4e76c5cc
......@@ -24,15 +24,8 @@
#include <linux/mm.h>
#include <linux/slab.h>
#include <asm/pgtable.h>
#include <asm/bootparam.h>
#include <asm/mmu_context.h>
#include <asm/tlb.h>
#include <asm/page.h>
#include <asm/pgalloc.h>
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
/* References to section boundaries */
......@@ -130,7 +123,8 @@ void __init bootmem_init(void)
/* Find an area to use for the bootmem bitmap. */
bootmap_size = bootmem_bootmap_pages(max_low_pfn) << PAGE_SHIFT;
bootmap_size = bootmem_bootmap_pages(max_low_pfn - min_low_pfn);
bootmap_size <<= PAGE_SHIFT;
bootmap_start = ~0;
for (i=0; i<sysmem.nr_banks; i++)
......@@ -145,8 +139,9 @@ void __init bootmem_init(void)
/* Reserve the bootmem bitmap area */
mem_reserve(bootmap_start, bootmap_start + bootmap_size, 1);
bootmap_size = init_bootmem_node(NODE_DATA(0), min_low_pfn,
bootmap_size = init_bootmem_node(NODE_DATA(0),
bootmap_start >> PAGE_SHIFT,
min_low_pfn,
max_low_pfn);
/* Add all remaining memory pieces into the bootmem map */
......@@ -158,14 +153,14 @@ void __init bootmem_init(void)
}
void __init paging_init(void)
void __init zones_init(void)
{
unsigned long zones_size[MAX_NR_ZONES];
int i;
/* All pages are DMA-able, so we put them all in the DMA zone. */
zones_size[ZONE_DMA] = max_low_pfn;
zones_size[ZONE_DMA] = max_low_pfn - ARCH_PFN_OFFSET;
for (i = 1; i < MAX_NR_ZONES; i++)
zones_size[i] = 0;
......@@ -173,40 +168,7 @@ void __init paging_init(void)
zones_size[ZONE_HIGHMEM] = max_pfn - max_low_pfn;
#endif
/* Initialize the kernel's page tables. */
memset(swapper_pg_dir, 0, PAGE_SIZE);
free_area_init(zones_size);
}
/*
* Flush the mmu and reset associated register to default values.
*/
void __init init_mmu (void)
{
/* Writing zeros to the <t>TLBCFG special registers ensure
* that valid values exist in the register. For existing
* PGSZID<w> fields, zero selects the first element of the
* page-size array. For nonexistent PGSZID<w> fields, zero is
* the best value to write. Also, when changing PGSZID<w>
* fields, the corresponding TLB must be flushed.
*/
set_itlbcfg_register (0);
set_dtlbcfg_register (0);
flush_tlb_all ();
/* Set rasid register to a known value. */
set_rasid_register (ASID_USER_FIRST);
/* Set PTEVADDR special register to the start of the page
* table, which is in kernel mappable space (ie. not
* statically mapped). This register's value is undefined on
* reset.
*/
set_ptevaddr_register (PGTABLE_START);
free_area_init_node(0, zones_size, ARCH_PFN_OFFSET, NULL);
}
/*
......@@ -218,8 +180,8 @@ void __init mem_init(void)
unsigned long codesize, reservedpages, datasize, initsize;
unsigned long highmemsize, tmp, ram;
max_mapnr = num_physpages = max_low_pfn;
high_memory = (void *) __va(max_mapnr << PAGE_SHIFT);
max_mapnr = num_physpages = max_low_pfn - ARCH_PFN_OFFSET;
high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
highmemsize = 0;
#ifdef CONFIG_HIGHMEM
......@@ -229,7 +191,7 @@ void __init mem_init(void)
totalram_pages += free_all_bootmem();
reservedpages = ram = 0;
for (tmp = 0; tmp < max_low_pfn; tmp++) {
for (tmp = 0; tmp < max_mapnr; tmp++) {
ram++;
if (PageReserved(mem_map+tmp))
reservedpages++;
......@@ -279,23 +241,3 @@ void free_initmem(void)
printk("Freeing unused kernel memory: %dk freed\n",
(&__init_end - &__init_begin) >> 10);
}
struct kmem_cache *pgtable_cache __read_mostly;
static void pgd_ctor(void* addr)
{
pte_t* ptep = (pte_t*)addr;
int i;
for (i = 0; i < 1024; i++, ptep++)
pte_clear(NULL, 0, ptep);
}
void __init pgtable_cache_init(void)
{
pgtable_cache = kmem_cache_create("pgd",
PAGE_SIZE, PAGE_SIZE,
SLAB_HWCACHE_ALIGN,
pgd_ctor);
}
arch/xtensa/mm/misc.S
浏览文件 @ 4e76c5cc
......@@ -84,6 +84,7 @@ ENTRY(copy_page)
retw
#ifdef CONFIG_MMU
/*
* If we have to deal with cache aliasing, we use temporary memory mappings
* to ensure that the source and destination pages have the same color as
......@@ -311,6 +312,7 @@ ENTRY(__invalidate_icache_page_alias)
/* End of special treatment in tlb miss exception */
ENTRY(__tlbtemp_mapping_end)
#endif /* CONFIG_MMU
/*
* void __invalidate_icache_page(ulong start)
......
arch/xtensa/mm/mmu.c 0 → 100644
浏览文件 @ 4e76c5cc
/*
* xtensa mmu stuff
*
* Extracted from init.c
*/
#include <linux/percpu.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/cache.h>
#include <asm/tlb.h>
#include <asm/tlbflush.h>
#include <asm/mmu_context.h>
#include <asm/page.h>
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
void __init paging_init(void)
{
memset(swapper_pg_dir, 0, PAGE_SIZE);
}
/*
* Flush the mmu and reset associated register to default values.
*/
void __init init_mmu(void)
{
/* Writing zeros to the <t>TLBCFG special registers ensure
* that valid values exist in the register. For existing
* PGSZID<w> fields, zero selects the first element of the
* page-size array. For nonexistent PGSZID<w> fields, zero is
* the best value to write. Also, when changing PGSZID<w>
* fields, the corresponding TLB must be flushed.
*/
set_itlbcfg_register(0);
set_dtlbcfg_register(0);
flush_tlb_all();
/* Set rasid register to a known value. */
set_rasid_register(ASID_USER_FIRST);
/* Set PTEVADDR special register to the start of the page
* table, which is in kernel mappable space (ie. not
* statically mapped). This register's value is undefined on
* reset.
*/
set_ptevaddr_register(PGTABLE_START);
}
struct kmem_cache *pgtable_cache __read_mostly;
static void pgd_ctor(void *addr)
{
pte_t *ptep = (pte_t *)addr;
int i;
for (i = 0; i < 1024; i++, ptep++)
pte_clear(NULL, 0, ptep);
}
void __init pgtable_cache_init(void)
{
pgtable_cache = kmem_cache_create("pgd",
PAGE_SIZE, PAGE_SIZE,
SLAB_HWCACHE_ALIGN,
pgd_ctor);
}
arch/xtensa/platforms/s6105/Makefile 0 → 100644
浏览文件 @ 4e76c5cc
# Makefile for the Stretch S6105 eval board
obj-y := setup.o device.o
arch/xtensa/platforms/s6105/device.c 0 → 100644
浏览文件 @ 4e76c5cc
/*
* s6105 platform devices
*
* Copyright (c) 2009 emlix GmbH
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <variant/hardware.h>
#define UART_INTNUM 4
static const signed char uart_irq_mappings[] = {
S6_INTC_UART(0),
S6_INTC_UART(1),
-1,
};
const signed char *platform_irq_mappings[NR_IRQS] = {
[UART_INTNUM] = uart_irq_mappings,
};
static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = (void *)S6_REG_UART + 0x0000,
.mapbase = S6_REG_UART + 0x0000,
.irq = UART_INTNUM,
.uartclk = S6_SCLK,
.regshift = 2,
.iotype = SERIAL_IO_MEM,
.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST,
},
{
.membase = (void *)S6_REG_UART + 0x1000,
.mapbase = S6_REG_UART + 0x1000,
.irq = UART_INTNUM,
.uartclk = S6_SCLK,
.regshift = 2,
.iotype = SERIAL_IO_MEM,
.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST,
},
{ },
};
static struct platform_device platform_devices[] = {
{
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = serial_platform_data,
},
},
};
static int __init device_init(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(platform_devices); i++)
platform_device_register(&platform_devices[i]);
return 0;
}
arch_initcall_sync(device_init);
arch/xtensa/platforms/s6105/include/platform/gpio.h 0 → 100644
浏览文件 @ 4e76c5cc
#ifndef __ASM_XTENSA_S6105_GPIO_H
#define __ASM_XTENSA_S6105_GPIO_H
#define GPIO_BP_TEMP_ALARM 0
#define GPIO_PB_RESET_IN 1
#define GPIO_EXP_IRQ 2
#define GPIO_TRIGGER_IRQ 3
#define GPIO_RTC_IRQ 4
#define GPIO_PHY_IRQ 5
#define GPIO_IMAGER_RESET 6
#define GPIO_SD_IRQ 7
#define GPIO_MINI_BOOT_INH 8
#define GPIO_BOARD_RESET 9
#define GPIO_EXP_PRESENT 10
#define GPIO_LED1_NGREEN 12
#define GPIO_LED1_RED 13
#define GPIO_LED0_NGREEN 14
#define GPIO_LED0_NRED 15
#define GPIO_SPI_CS0 16
#define GPIO_SPI_CS1 17
#define GPIO_SPI_CS3 19
#define GPIO_SPI_CS4 20
#define GPIO_SD_WP 21
#define GPIO_BP_RESET 22
#define GPIO_ALARM_OUT 23
#endif /* __ASM_XTENSA_S6105_GPIO_H */
arch/xtensa/platforms/s6105/include/platform/hardware.h 0 → 100644
浏览文件 @ 4e76c5cc
#ifndef __XTENSA_S6105_HARDWARE_H
#define __XTENSA_S6105_HARDWARE_H
#define PLATFORM_DEFAULT_MEM_START 0x40000000
#define PLATFORM_DEFAULT_MEM_SIZE 0x08000000
#define MAX_DMA_ADDRESS 0
#define KERNELOFFSET (PLATFORM_DEFAULT_MEM_START + 0x1000)
#endif /* __XTENSA_S6105_HARDWARE_H */
arch/xtensa/platforms/s6105/include/platform/serial.h 0 → 100644
浏览文件 @ 4e76c5cc
#ifndef __ASM_XTENSA_S6105_SERIAL_H
#define __ASM_XTENSA_S6105_SERIAL_H
#include <variant/hardware.h>
#define BASE_BAUD (S6_SCLK / 16)
#endif /* __ASM_XTENSA_S6105_SERIAL_H */
arch/xtensa/platforms/s6105/setup.c 0 → 100644
浏览文件 @ 4e76c5cc
/*
* s6105 control routines
*
* Copyright (c) 2009 emlix GmbH
*/
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <asm/bootparam.h>
#include <variant/hardware.h>
#include <platform/gpio.h>
void platform_halt(void)
{
local_irq_disable();
while (1)
;
}
void platform_power_off(void)
{
platform_halt();
}
void platform_restart(void)
{
platform_halt();
}
void __init platform_setup(char **cmdline)
{
unsigned long reg;
reg = readl(S6_REG_GREG1 + S6_GREG1_CLKGATE);
reg &= ~(1 << S6_GREG1_BLOCK_SB);
writel(reg, S6_REG_GREG1 + S6_GREG1_CLKGATE);
reg = readl(S6_REG_GREG1 + S6_GREG1_BLOCKENA);
reg |= 1 << S6_GREG1_BLOCK_SB;
writel(reg, S6_REG_GREG1 + S6_GREG1_BLOCKENA);
printk(KERN_NOTICE "S6105 on Stretch S6000 - "
"Copyright (C) 2009 emlix GmbH <info@emlix.com>\n");
}
void __init platform_init(bp_tag_t *first)
{
gpio_request(GPIO_LED1_NGREEN, "led1_green");
gpio_request(GPIO_LED1_RED, "led1_red");
gpio_direction_output(GPIO_LED1_NGREEN, 1);
}
void platform_heartbeat(void)
{
static unsigned int c;
if (!(++c & 0x4F))
gpio_direction_output(GPIO_LED1_RED, !(c & 0x10));
}
arch/xtensa/platforms/xt2000/include/platform/hardware.h
浏览文件 @ 4e76c5cc
......@@ -16,7 +16,6 @@
#define _XTENSA_XT2000_HARDWARE_H
#include <variant/core.h>
#include <asm/io.h>
/*
* Memory configuration.
......
arch/xtensa/variants/s6000/Makefile 0 → 100644
浏览文件 @ 4e76c5cc
# s6000 Makefile
obj-y += irq.o gpio.o
arch/xtensa/variants/s6000/gpio.c 0 → 100644
浏览文件 @ 4e76c5cc
/*
* s6000 gpio driver
*
* Copyright (c) 2009 emlix GmbH
* Authors: Oskar Schirmer <os@emlix.com>
* Johannes Weiner <jw@emlix.com>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <variant/hardware.h>
#define S6_GPIO_DATA 0x000
#define S6_GPIO_IS 0x404
#define S6_GPIO_IBE 0x408
#define S6_GPIO_IEV 0x40C
#define S6_GPIO_IE 0x410
#define S6_GPIO_RIS 0x414
#define S6_GPIO_MIS 0x418
#define S6_GPIO_IC 0x41C
#define S6_GPIO_AFSEL 0x420
#define S6_GPIO_DIR 0x800
#define S6_GPIO_BANK(nr) ((nr) * 0x1000)
#define S6_GPIO_MASK(nr) (4 << (nr))
#define S6_GPIO_OFFSET(nr) \
(S6_GPIO_BANK((nr) >> 3) + S6_GPIO_MASK((nr) & 7))
static int direction_input(struct gpio_chip *chip, unsigned int off)
{
writeb(0, S6_REG_GPIO + S6_GPIO_DIR + S6_GPIO_OFFSET(off));
return 0;
}
static int get(struct gpio_chip *chip, unsigned int off)
{
return readb(S6_REG_GPIO + S6_GPIO_DATA + S6_GPIO_OFFSET(off));
}
static int direction_output(struct gpio_chip *chip, unsigned int off, int val)
{
unsigned rel = S6_GPIO_OFFSET(off);
writeb(~0, S6_REG_GPIO + S6_GPIO_DIR + rel);
writeb(val ? ~0 : 0, S6_REG_GPIO + S6_GPIO_DATA + rel);
return 0;
}
static void set(struct gpio_chip *chip, unsigned int off, int val)
{
writeb(val ? ~0 : 0, S6_REG_GPIO + S6_GPIO_DATA + S6_GPIO_OFFSET(off));
}
static struct gpio_chip gpiochip = {
.owner = THIS_MODULE,
.direction_input = direction_input,
.get = get,
.direction_output = direction_output,
.set = set,
.base = 0,
.ngpio = 24,
.can_sleep = 0, /* no blocking io needed */
.exported = 0, /* no exporting to userspace */
};
static int gpio_init(void)
{
return gpiochip_add(&gpiochip);
}
device_initcall(gpio_init);
arch/xtensa/variants/s6000/include/variant/core.h 0 → 100644
浏览文件 @ 4e76c5cc
/*
* Xtensa processor core configuration information.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (c) 1999-2008 Tensilica Inc.
*/
#ifndef _XTENSA_CORE_CONFIGURATION_H
#define _XTENSA_CORE_CONFIGURATION_H
/****************************************************************************
Parameters Useful for Any Code, USER or PRIVILEGED
****************************************************************************/
/*
* Note: Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is
* configured, and a value of 0 otherwise. These macros are always defined.
*/
/*----------------------------------------------------------------------
ISA
----------------------------------------------------------------------*/
#define XCHAL_HAVE_BE 0 /* big-endian byte ordering */
#define XCHAL_HAVE_WINDOWED 1 /* windowed registers option */
#define XCHAL_NUM_AREGS 64 /* num of physical addr regs */
#define XCHAL_NUM_AREGS_LOG2 6 /* log2(XCHAL_NUM_AREGS) */
#define XCHAL_MAX_INSTRUCTION_SIZE 8 /* max instr bytes (3..8) */
#define XCHAL_HAVE_DEBUG 1 /* debug option */
#define XCHAL_HAVE_DENSITY 1 /* 16-bit instructions */
#define XCHAL_HAVE_LOOPS 1 /* zero-overhead loops */
#define XCHAL_HAVE_NSA 1 /* NSA/NSAU instructions */
#define XCHAL_HAVE_MINMAX 1 /* MIN/MAX instructions */
#define XCHAL_HAVE_SEXT 1 /* SEXT instruction */
#define XCHAL_HAVE_CLAMPS 1 /* CLAMPS instruction */
#define XCHAL_HAVE_MUL16 1 /* MUL16S/MUL16U instructions */
#define XCHAL_HAVE_MUL32 1 /* MULL instruction */
#define XCHAL_HAVE_MUL32_HIGH 1 /* MULUH/MULSH instructions */
#define XCHAL_HAVE_DIV32 0 /* QUOS/QUOU/REMS/REMU instructions */
#define XCHAL_HAVE_L32R 1 /* L32R instruction */
#define XCHAL_HAVE_ABSOLUTE_LITERALS 1 /* non-PC-rel (extended) L32R */
#define XCHAL_HAVE_CONST16 0 /* CONST16 instruction */
#define XCHAL_HAVE_ADDX 1 /* ADDX#/SUBX# instructions */
#define XCHAL_HAVE_WIDE_BRANCHES 0 /* B*.W18 or B*.W15 instr's */
#define XCHAL_HAVE_PREDICTED_BRANCHES 0 /* B[EQ/EQZ/NE/NEZ]T instr's */
#define XCHAL_HAVE_CALL4AND12 1 /* (obsolete option) */
#define XCHAL_HAVE_ABS 1 /* ABS instruction */
/*#define XCHAL_HAVE_POPC 0*/ /* POPC instruction */
/*#define XCHAL_HAVE_CRC 0*/ /* CRC instruction */
#define XCHAL_HAVE_RELEASE_SYNC 0 /* L32AI/S32RI instructions */
#define XCHAL_HAVE_S32C1I 0 /* S32C1I instruction */
#define XCHAL_HAVE_SPECULATION 0 /* speculation */
#define XCHAL_HAVE_FULL_RESET 0 /* all regs/state reset */
#define XCHAL_NUM_CONTEXTS 1 /* */
#define XCHAL_NUM_MISC_REGS 4 /* num of scratch regs (0..4) */
#define XCHAL_HAVE_TAP_MASTER 0 /* JTAG TAP control instr's */
#define XCHAL_HAVE_PRID 0 /* processor ID register */
#define XCHAL_HAVE_THREADPTR 0 /* THREADPTR register */
#define XCHAL_HAVE_BOOLEANS 1 /* boolean registers */
#define XCHAL_HAVE_CP 1 /* CPENABLE reg (coprocessor) */
#define XCHAL_CP_MAXCFG 8 /* max allowed cp id plus one */
#define XCHAL_HAVE_MAC16 0 /* MAC16 package */
#define XCHAL_HAVE_VECTORFPU2005 0 /* vector floating-point pkg */
#define XCHAL_HAVE_FP 1 /* floating point pkg */
#define XCHAL_HAVE_VECTRA1 0 /* Vectra I pkg */
#define XCHAL_HAVE_VECTRALX 0 /* Vectra LX pkg */
#define XCHAL_HAVE_HIFI2 0 /* HiFi2 Audio Engine pkg */
/*----------------------------------------------------------------------
MISC
----------------------------------------------------------------------*/
#define XCHAL_NUM_WRITEBUFFER_ENTRIES 8 /* size of write buffer */
#define XCHAL_INST_FETCH_WIDTH 8 /* instr-fetch width in bytes */
#define XCHAL_DATA_WIDTH 16 /* data width in bytes */
/* In T1050, applies to selected core load and store instructions (see ISA): */
#define XCHAL_UNALIGNED_LOAD_EXCEPTION 1 /* unaligned loads cause exc. */
#define XCHAL_UNALIGNED_STORE_EXCEPTION 1 /* unaligned stores cause exc.*/
#define XCHAL_SW_VERSION 701001 /* sw version of this header */
#define XCHAL_CORE_ID "stretch_bali" /* alphanum core name
(CoreID) set in the Xtensa
Processor Generator */
#define XCHAL_BUILD_UNIQUE_ID 0x000104B9 /* 22-bit sw build ID */
/*
* These definitions describe the hardware targeted by this software.
*/
#define XCHAL_HW_CONFIGID0 0xC2F3F9FE /* ConfigID hi 32 bits*/
#define XCHAL_HW_CONFIGID1 0x054104B9 /* ConfigID lo 32 bits*/
#define XCHAL_HW_VERSION_NAME "LX1.0.2" /* full version name */
#define XCHAL_HW_VERSION_MAJOR 2100 /* major ver# of targeted hw */
#define XCHAL_HW_VERSION_MINOR 2 /* minor ver# of targeted hw */
#define XCHAL_HW_VERSION 210002 /* major*100+minor */
#define XCHAL_HW_REL_LX1 1
#define XCHAL_HW_REL_LX1_0 1
#define XCHAL_HW_REL_LX1_0_2 1
#define XCHAL_HW_CONFIGID_RELIABLE 1
/* If software targets a *range* of hardware versions, these are the bounds: */
#define XCHAL_HW_MIN_VERSION_MAJOR 2100 /* major v of earliest tgt hw */
#define XCHAL_HW_MIN_VERSION_MINOR 2 /* minor v of earliest tgt hw */
#define XCHAL_HW_MIN_VERSION 210002 /* earliest targeted hw */
#define XCHAL_HW_MAX_VERSION_MAJOR 2100 /* major v of latest tgt hw */
#define XCHAL_HW_MAX_VERSION_MINOR 2 /* minor v of latest tgt hw */
#define XCHAL_HW_MAX_VERSION 210002 /* latest targeted hw */
/*----------------------------------------------------------------------
CACHE
----------------------------------------------------------------------*/
#define XCHAL_ICACHE_LINESIZE 16 /* I-cache line size in bytes */
#define XCHAL_DCACHE_LINESIZE 16 /* D-cache line size in bytes */
#define XCHAL_ICACHE_LINEWIDTH 4 /* log2(I line size in bytes) */
#define XCHAL_DCACHE_LINEWIDTH 4 /* log2(D line size in bytes) */
#define XCHAL_ICACHE_SIZE 32768 /* I-cache size in bytes or 0 */
#define XCHAL_DCACHE_SIZE 32768 /* D-cache size in bytes or 0 */
#define XCHAL_DCACHE_IS_WRITEBACK 1 /* writeback feature */
/****************************************************************************
Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code
****************************************************************************/
#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY
/*----------------------------------------------------------------------
CACHE
----------------------------------------------------------------------*/
#define XCHAL_HAVE_PIF 1 /* any outbound PIF present */
/* If present, cache size in bytes == (ways * 2^(linewidth + setwidth)). */
/* Number of cache sets in log2(lines per way): */
#define XCHAL_ICACHE_SETWIDTH 9
#define XCHAL_DCACHE_SETWIDTH 10
/* Cache set associativity (number of ways): */
#define XCHAL_ICACHE_WAYS 4
#define XCHAL_DCACHE_WAYS 2
/* Cache features: */
#define XCHAL_ICACHE_LINE_LOCKABLE 1
#define XCHAL_DCACHE_LINE_LOCKABLE 0
#define XCHAL_ICACHE_ECC_PARITY 0
#define XCHAL_DCACHE_ECC_PARITY 0
/* Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits): */
#define XCHAL_CA_BITS 4
/*----------------------------------------------------------------------
INTERNAL I/D RAM/ROMs and XLMI
----------------------------------------------------------------------*/
#define XCHAL_NUM_INSTROM 0 /* number of core instr. ROMs */
#define XCHAL_NUM_INSTRAM 0 /* number of core instr. RAMs */
#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs */
#define XCHAL_NUM_DATARAM 1 /* number of core data RAMs */
#define XCHAL_NUM_URAM 0 /* number of core unified RAMs*/
#define XCHAL_NUM_XLMI 1 /* number of core XLMI ports */
/* Data RAM 0: */
#define XCHAL_DATARAM0_VADDR 0x3FFF0000
#define XCHAL_DATARAM0_PADDR 0x3FFF0000
#define XCHAL_DATARAM0_SIZE 65536
#define XCHAL_DATARAM0_ECC_PARITY 0
/* XLMI Port 0: */
#define XCHAL_XLMI0_VADDR 0x37F80000
#define XCHAL_XLMI0_PADDR 0x37F80000
#define XCHAL_XLMI0_SIZE 262144
#define XCHAL_XLMI0_ECC_PARITY 0
/*----------------------------------------------------------------------
INTERRUPTS and TIMERS
----------------------------------------------------------------------*/
#define XCHAL_HAVE_INTERRUPTS 1 /* interrupt option */
#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* med/high-pri. interrupts */
#define XCHAL_HAVE_NMI 1 /* non-maskable interrupt */
#define XCHAL_HAVE_CCOUNT 1 /* CCOUNT reg. (timer option) */
#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */
#define XCHAL_NUM_INTERRUPTS 27 /* number of interrupts */
#define XCHAL_NUM_INTERRUPTS_LOG2 5 /* ceil(log2(NUM_INTERRUPTS)) */
#define XCHAL_NUM_EXTINTERRUPTS 20 /* num of external interrupts */
#define XCHAL_NUM_INTLEVELS 4 /* number of interrupt levels
(not including level zero) */
#define XCHAL_EXCM_LEVEL 1 /* level masked by PS.EXCM */
/* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */
/* Masks of interrupts at each interrupt level: */
#define XCHAL_INTLEVEL1_MASK 0x01F07FFF
#define XCHAL_INTLEVEL2_MASK 0x02018000
#define XCHAL_INTLEVEL3_MASK 0x04060000
#define XCHAL_INTLEVEL4_MASK 0x00000000
#define XCHAL_INTLEVEL5_MASK 0x00080000
#define XCHAL_INTLEVEL6_MASK 0x00000000
#define XCHAL_INTLEVEL7_MASK 0x00000000
/* Masks of interrupts at each range 1..n of interrupt levels: */
#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x01F07FFF
#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x03F1FFFF
#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x07F7FFFF
#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x07F7FFFF
#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x07FFFFFF
#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x07FFFFFF
#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x07FFFFFF
/* Level of each interrupt: */
#define XCHAL_INT0_LEVEL 1
#define XCHAL_INT1_LEVEL 1
#define XCHAL_INT2_LEVEL 1
#define XCHAL_INT3_LEVEL 1
#define XCHAL_INT4_LEVEL 1
#define XCHAL_INT5_LEVEL 1
#define XCHAL_INT6_LEVEL 1
#define XCHAL_INT7_LEVEL 1
#define XCHAL_INT8_LEVEL 1
#define XCHAL_INT9_LEVEL 1
#define XCHAL_INT10_LEVEL 1
#define XCHAL_INT11_LEVEL 1
#define XCHAL_INT12_LEVEL 1
#define XCHAL_INT13_LEVEL 1
#define XCHAL_INT14_LEVEL 1
#define XCHAL_INT15_LEVEL 2
#define XCHAL_INT16_LEVEL 2
#define XCHAL_INT17_LEVEL 3
#define XCHAL_INT18_LEVEL 3
#define XCHAL_INT19_LEVEL 5
#define XCHAL_INT20_LEVEL 1
#define XCHAL_INT21_LEVEL 1
#define XCHAL_INT22_LEVEL 1
#define XCHAL_INT23_LEVEL 1
#define XCHAL_INT24_LEVEL 1
#define XCHAL_INT25_LEVEL 2
#define XCHAL_INT26_LEVEL 3
#define XCHAL_DEBUGLEVEL 4 /* debug interrupt level */
#define XCHAL_HAVE_DEBUG_EXTERN_INT 1 /* OCD external db interrupt */
#define XCHAL_NMILEVEL 5 /* NMI "level" (for use with
EXCSAVE/EPS/EPC_n, RFI n) */
/* Type of each interrupt: */
#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT6_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT7_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT10_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT11_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT12_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT13_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT14_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT15_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT16_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT17_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT18_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
#define XCHAL_INT19_TYPE XTHAL_INTTYPE_NMI
#define XCHAL_INT20_TYPE XTHAL_INTTYPE_SOFTWARE
#define XCHAL_INT21_TYPE XTHAL_INTTYPE_SOFTWARE
#define XCHAL_INT22_TYPE XTHAL_INTTYPE_SOFTWARE
#define XCHAL_INT23_TYPE XTHAL_INTTYPE_SOFTWARE
#define XCHAL_INT24_TYPE XTHAL_INTTYPE_TIMER
#define XCHAL_INT25_TYPE XTHAL_INTTYPE_TIMER
#define XCHAL_INT26_TYPE XTHAL_INTTYPE_TIMER
/* Masks of interrupts for each type of interrupt: */
#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xF8000000
#define XCHAL_INTTYPE_MASK_SOFTWARE 0x00F00000
#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x00000000
#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x0007FFFF
#define XCHAL_INTTYPE_MASK_TIMER 0x07000000
#define XCHAL_INTTYPE_MASK_NMI 0x00080000
#define XCHAL_INTTYPE_MASK_WRITE_ERROR 0x00000000
/* Interrupt numbers assigned to specific interrupt sources: */
#define XCHAL_TIMER0_INTERRUPT 24 /* CCOMPARE0 */
#define XCHAL_TIMER1_INTERRUPT 25 /* CCOMPARE1 */
#define XCHAL_TIMER2_INTERRUPT 26 /* CCOMPARE2 */
#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED
#define XCHAL_NMI_INTERRUPT 19 /* non-maskable interrupt */
/* Interrupt numbers for levels at which only one interrupt is configured: */
#define XCHAL_INTLEVEL5_NUM 19
/* (There are many interrupts each at level(s) 1, 2, 3.) */
/*
* External interrupt vectors/levels.
* These macros describe how Xtensa processor interrupt numbers
* (as numbered internally, eg. in INTERRUPT and INTENABLE registers)
* map to external BInterrupt<n> pins, for those interrupts
* configured as external (level-triggered, edge-triggered, or NMI).
* See the Xtensa processor databook for more details.
*/
/* Core interrupt numbers mapped to each EXTERNAL interrupt number: */
#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */
#define XCHAL_EXTINT1_NUM 1 /* (intlevel 1) */
#define XCHAL_EXTINT2_NUM 2 /* (intlevel 1) */
#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */
#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */
#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */
#define XCHAL_EXTINT6_NUM 6 /* (intlevel 1) */
#define XCHAL_EXTINT7_NUM 7 /* (intlevel 1) */
#define XCHAL_EXTINT8_NUM 8 /* (intlevel 1) */
#define XCHAL_EXTINT9_NUM 9 /* (intlevel 1) */
#define XCHAL_EXTINT10_NUM 10 /* (intlevel 1) */
#define XCHAL_EXTINT11_NUM 11 /* (intlevel 1) */
#define XCHAL_EXTINT12_NUM 12 /* (intlevel 1) */
#define XCHAL_EXTINT13_NUM 13 /* (intlevel 1) */
#define XCHAL_EXTINT14_NUM 14 /* (intlevel 1) */
#define XCHAL_EXTINT15_NUM 15 /* (intlevel 2) */
#define XCHAL_EXTINT16_NUM 16 /* (intlevel 2) */
#define XCHAL_EXTINT17_NUM 17 /* (intlevel 3) */
#define XCHAL_EXTINT18_NUM 18 /* (intlevel 3) */
#define XCHAL_EXTINT19_NUM 19 /* (intlevel 5) */
/*----------------------------------------------------------------------
EXCEPTIONS and VECTORS
----------------------------------------------------------------------*/
#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture
number: 1 == XEA1 (old)
2 == XEA2 (new)
0 == XEAX (extern) */
#define XCHAL_HAVE_XEA1 0 /* Exception Architecture 1 */
#define XCHAL_HAVE_XEA2 1 /* Exception Architecture 2 */
#define XCHAL_HAVE_XEAX 0 /* External Exception Arch. */
#define XCHAL_HAVE_EXCEPTIONS 1 /* exception option */
#define XCHAL_HAVE_MEM_ECC_PARITY 0 /* local memory ECC/parity */
#define XCHAL_HAVE_VECTOR_SELECT 0 /* relocatable vectors */
#define XCHAL_HAVE_VECBASE 0 /* relocatable vectors */
#define XCHAL_RESET_VECOFS 0x00000000
#define XCHAL_RESET_VECTOR_VADDR 0x3FFE03D0
#define XCHAL_RESET_VECTOR_PADDR 0x3FFE03D0
#define XCHAL_USER_VECOFS 0x00000000
#define XCHAL_USER_VECTOR_VADDR 0x40000220
#define XCHAL_USER_VECTOR_PADDR 0x40000220
#define XCHAL_KERNEL_VECOFS 0x00000000
#define XCHAL_KERNEL_VECTOR_VADDR 0x40000200
#define XCHAL_KERNEL_VECTOR_PADDR 0x40000200
#define XCHAL_DOUBLEEXC_VECOFS 0x00000000
#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0x400002A0
#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x400002A0
#define XCHAL_WINDOW_OF4_VECOFS 0x00000000
#define XCHAL_WINDOW_UF4_VECOFS 0x00000040
#define XCHAL_WINDOW_OF8_VECOFS 0x00000080
#define XCHAL_WINDOW_UF8_VECOFS 0x000000C0
#define XCHAL_WINDOW_OF12_VECOFS 0x00000100
#define XCHAL_WINDOW_UF12_VECOFS 0x00000140
#define XCHAL_WINDOW_VECTORS_VADDR 0x40000000
#define XCHAL_WINDOW_VECTORS_PADDR 0x40000000
#define XCHAL_INTLEVEL2_VECOFS 0x00000000
#define XCHAL_INTLEVEL2_VECTOR_VADDR 0x40000240
#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x40000240
#define XCHAL_INTLEVEL3_VECOFS 0x00000000
#define XCHAL_INTLEVEL3_VECTOR_VADDR 0x40000260
#define XCHAL_INTLEVEL3_VECTOR_PADDR 0x40000260
#define XCHAL_INTLEVEL4_VECOFS 0x00000000
#define XCHAL_INTLEVEL4_VECTOR_VADDR 0x40000390
#define XCHAL_INTLEVEL4_VECTOR_PADDR 0x40000390
#define XCHAL_DEBUG_VECOFS XCHAL_INTLEVEL4_VECOFS
#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL4_VECTOR_VADDR
#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL4_VECTOR_PADDR
#define XCHAL_NMI_VECOFS 0x00000000
#define XCHAL_NMI_VECTOR_VADDR 0x400003B0
#define XCHAL_NMI_VECTOR_PADDR 0x400003B0
#define XCHAL_INTLEVEL5_VECOFS XCHAL_NMI_VECOFS
#define XCHAL_INTLEVEL5_VECTOR_VADDR XCHAL_NMI_VECTOR_VADDR
#define XCHAL_INTLEVEL5_VECTOR_PADDR XCHAL_NMI_VECTOR_PADDR
/*----------------------------------------------------------------------
DEBUG
----------------------------------------------------------------------*/
#define XCHAL_HAVE_OCD 1 /* OnChipDebug option */
#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */
#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */
#define XCHAL_HAVE_OCD_DIR_ARRAY 1 /* faster OCD option */
/*----------------------------------------------------------------------
MMU
----------------------------------------------------------------------*/
/* See core-matmap.h header file for more details. */
#define XCHAL_HAVE_TLBS 1 /* inverse of HAVE_CACHEATTR */
#define XCHAL_HAVE_SPANNING_WAY 1 /* one way maps I+D 4GB vaddr */
#define XCHAL_HAVE_IDENTITY_MAP 1 /* vaddr == paddr always */
#define XCHAL_HAVE_CACHEATTR 0 /* CACHEATTR register present */
#define XCHAL_HAVE_MIMIC_CACHEATTR 1 /* region protection */
#define XCHAL_HAVE_XLT_CACHEATTR 0 /* region prot. w/translation */
#define XCHAL_HAVE_PTP_MMU 0 /* full MMU (with page table
[autorefill] and protection)
usable for an MMU-based OS */
/* If none of the above last 4 are set, it's a custom TLB configuration. */
#define XCHAL_MMU_ASID_BITS 0 /* number of bits in ASIDs */
#define XCHAL_MMU_RINGS 1 /* number of rings (1..4) */
#define XCHAL_MMU_RING_BITS 0 /* num of bits in RING field */
#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */
#endif /* _XTENSA_CORE_CONFIGURATION_H */
arch/xtensa/variants/s6000/include/variant/hardware.h 0 → 100644
浏览文件 @ 4e76c5cc
#ifndef __XTENSA_S6000_HARDWARE_H
#define __XTENSA_S6000_HARDWARE_H
#define S6_SCLK 1843200
#define S6_MEM_REG 0x20000000
#define S6_MEM_EFI 0x33F00000
#define S6_MEM_PCIE_DATARAM1 0x34000000
#define S6_MEM_XLMI 0x37F80000
#define S6_MEM_PIF_DATARAM1 0x37FFC000
#define S6_MEM_GMAC 0x38000000
#define S6_MEM_I2S 0x3A000000
#define S6_MEM_EGIB 0x3C000000
#define S6_MEM_PCIE_CFG 0x3E000000
#define S6_MEM_PIF_DATARAM 0x3FFE0000
#define S6_MEM_XLMI_DATARAM 0x3FFF0000
#define S6_MEM_DDR 0x40000000
#define S6_MEM_PCIE_APER 0xC0000000
#define S6_MEM_AUX 0xF0000000
/* Device addresses */
#define S6_REG_SCB S6_MEM_REG
#define S6_REG_NB (S6_REG_SCB + 0x10000)
#define S6_REG_LMSDMA (S6_REG_SCB + 0x20000)
#define S6_REG_NI (S6_REG_SCB + 0x30000)
#define S6_REG_NIDMA (S6_REG_SCB + 0x40000)
#define S6_REG_NS (S6_REG_SCB + 0x50000)
#define S6_REG_DDR (S6_REG_SCB + 0x60000)
#define S6_REG_GREG1 (S6_REG_SCB + 0x70000)
#define S6_REG_DP (S6_REG_SCB + 0x80000)
#define S6_REG_DPDMA (S6_REG_SCB + 0x90000)
#define S6_REG_EGIB (S6_REG_SCB + 0xA0000)
#define S6_REG_PCIE (S6_REG_SCB + 0xB0000)
#define S6_REG_I2S (S6_REG_SCB + 0xC0000)
#define S6_REG_GMAC (S6_REG_SCB + 0xD0000)
#define S6_REG_HIFDMA (S6_REG_SCB + 0xE0000)
#define S6_REG_GREG2 (S6_REG_SCB + 0xF0000)
#define S6_REG_APB S6_REG_SCB
#define S6_REG_UART (S6_REG_APB + 0x0000)
#define S6_REG_INTC (S6_REG_APB + 0x2000)
#define S6_REG_SPI (S6_REG_APB + 0x3000)
#define S6_REG_I2C (S6_REG_APB + 0x4000)
#define S6_REG_GPIO (S6_REG_APB + 0x8000)
/* Global register block */
#define S6_GREG1_PLL_LOCKCLEAR 0x000
#define S6_GREG1_PLL_LOCK_SYS 0
#define S6_GREG1_PLL_LOCK_IO 1
#define S6_GREG1_PLL_LOCK_AIM 2
#define S6_GREG1_PLL_LOCK_DP0 3
#define S6_GREG1_PLL_LOCK_DP2 4
#define S6_GREG1_PLL_LOCK_DDR 5
#define S6_GREG1_PLL_LOCKSTAT 0x004
#define S6_GREG1_PLL_LOCKSTAT_CURLOCK 0
#define S6_GREG1_PLL_LOCKSTAT_EVERUNLCK 8
#define S6_GREG1_PLLSEL 0x010
#define S6_GREG1_PLLSEL_AIM 0
#define S6_GREG1_PLLSEL_AIM_DDR2 0
#define S6_GREG1_PLLSEL_AIM_300MHZ 1
#define S6_GREG1_PLLSEL_AIM_240MHZ 2
#define S6_GREG1_PLLSEL_AIM_200MHZ 3
#define S6_GREG1_PLLSEL_AIM_150MHZ 4
#define S6_GREG1_PLLSEL_AIM_120MHZ 5
#define S6_GREG1_PLLSEL_AIM_40MHZ 6
#define S6_GREG1_PLLSEL_AIM_PLLAIMREF 7
#define S6_GREG1_PLLSEL_AIM_MASK 7
#define S6_GREG1_PLLSEL_DDR 8
#define S6_GREG1_PLLSEL_DDR_HS 0
#define S6_GREG1_PLLSEL_DDR_333MHZ 1
#define S6_GREG1_PLLSEL_DDR_250MHZ 2
#define S6_GREG1_PLLSEL_DDR_200MHZ 3
#define S6_GREG1_PLLSEL_DDR_167MHZ 4
#define S6_GREG1_PLLSEL_DDR_100MHZ 5
#define S6_GREG1_PLLSEL_DDR_33MHZ 6
#define S6_GREG1_PLLSEL_DDR_PLLIOREF 7
#define S6_GREG1_PLLSEL_DDR_MASK 7
#define S6_GREG1_PLLSEL_GMAC 16
#define S6_GREG1_PLLSEL_GMAC_125MHZ 0
#define S6_GREG1_PLLSEL_GMAC_25MHZ 1
#define S6_GREG1_PLLSEL_GMAC_2500KHZ 2
#define S6_GREG1_PLLSEL_GMAC_EXTERN 3
#define S6_GREG1_PLLSEL_GMAC_MASK 3
#define S6_GREG1_PLLSEL_GMII 18
#define S6_GREG1_PLLSEL_GMII_111MHZ 0
#define S6_GREG1_PLLSEL_GMII_IOREF 1
#define S6_GREG1_PLLSEL_GMII_NONE 2
#define S6_GREG1_PLLSEL_GMII_125MHZ 3
#define S6_GREG1_PLLSEL_GMII_MASK 3
#define S6_GREG1_SYSUNLOCKCNT 0x020
#define S6_GREG1_IOUNLOCKCNT 0x024
#define S6_GREG1_AIMUNLOCKCNT 0x028
#define S6_GREG1_DP0UNLOCKCNT 0x02C
#define S6_GREG1_DP2UNLOCKCNT 0x030
#define S6_GREG1_DDRUNLOCKCNT 0x034
#define S6_GREG1_CLKBAL0 0x040
#define S6_GREG1_CLKBAL0_LSGB 0
#define S6_GREG1_CLKBAL0_LSPX 8
#define S6_GREG1_CLKBAL0_MEMDO 16
#define S6_GREG1_CLKBAL0_HSXT1 24
#define S6_GREG1_CLKBAL1 0x044
#define S6_GREG1_CLKBAL1_HSISEF 0
#define S6_GREG1_CLKBAL1_HSNI 8
#define S6_GREG1_CLKBAL1_HSNS 16
#define S6_GREG1_CLKBAL1_HSISEFCFG 24
#define S6_GREG1_CLKBAL2 0x048
#define S6_GREG1_CLKBAL2_LSNB 0
#define S6_GREG1_CLKBAL2_LSSB 8
#define S6_GREG1_CLKBAL2_LSREST 24
#define S6_GREG1_CLKBAL3 0x04C
#define S6_GREG1_CLKBAL3_ISEFXAD 0
#define S6_GREG1_CLKBAL3_ISEFLMS 8
#define S6_GREG1_CLKBAL3_ISEFISEF 16
#define S6_GREG1_CLKBAL3_DDRDD 24
#define S6_GREG1_CLKBAL4 0x050
#define S6_GREG1_CLKBAL4_DDRDP 0
#define S6_GREG1_CLKBAL4_DDRDO 8
#define S6_GREG1_CLKBAL4_DDRNB 16
#define S6_GREG1_CLKBAL4_DDRLMS 24
#define S6_GREG1_BLOCKENA 0x100
#define S6_GREG1_BLOCK_DDR 0
#define S6_GREG1_BLOCK_DP 1
#define S6_GREG1_BLOCK_NSNI 2
#define S6_GREG1_BLOCK_PCIE 3
#define S6_GREG1_BLOCK_GMAC 4
#define S6_GREG1_BLOCK_I2S 5
#define S6_GREG1_BLOCK_EGIB 6
#define S6_GREG1_BLOCK_SB 7
#define S6_GREG1_BLOCK_XT1 8
#define S6_GREG1_CLKGATE 0x104
#define S6_GREG1_BGATE_AIMNORTH 9
#define S6_GREG1_BGATE_AIMEAST 10
#define S6_GREG1_BGATE_AIMWEST 11
#define S6_GREG1_BGATE_AIMSOUTH 12
#define S6_GREG1_CHIPRES 0x108
#define S6_GREG1_CHIPRES_SOFTRES 0
#define S6_GREG1_CHIPRES_LOSTLOCK 1
#define S6_GREG1_RESETCAUSE 0x10C
#define S6_GREG1_RESETCAUSE_RESETN 0
#define S6_GREG1_RESETCAUSE_GLOBAL 1
#define S6_GREG1_RESETCAUSE_WDOGTIMER 2
#define S6_GREG1_RESETCAUSE_SWCHIP 3
#define S6_GREG1_RESETCAUSE_PLLSYSLOSS 4
#define S6_GREG1_RESETCAUSE_PCIE 5
#define S6_GREG1_RESETCAUSE_CREATEDGLOB 6
#define S6_GREG1_REFCLOCKCNT 0x110
#define S6_GREG1_RESETTIMER 0x114
#define S6_GREG1_NMITIMER 0x118
#define S6_GREG1_GLOBAL_TIMER 0x11C
#define S6_GREG1_TIMER0 0x180
#define S6_GREG1_TIMER1 0x184
#define S6_GREG1_UARTCLOCKSEL 0x204
#define S6_GREG1_CHIPVERSPACKG 0x208
#define S6_GREG1_CHIPVERSPACKG_CHIPVID 0
#define S6_GREG1_CHIPVERSPACKG_PACKSEL 8
#define S6_GREG1_ONDIETERMCTRL 0x20C
#define S6_GREG1_ONDIETERMCTRL_WEST 0
#define S6_GREG1_ONDIETERMCTRL_NORTH 2
#define S6_GREG1_ONDIETERMCTRL_EAST 4
#define S6_GREG1_ONDIETERMCTRL_SOUTH 6
#define S6_GREG1_ONDIETERMCTRL_NONE 0
#define S6_GREG1_ONDIETERMCTRL_75OHM 2
#define S6_GREG1_ONDIETERMCTRL_MASK 3
#define S6_GREG1_BOOT_CFG0 0x210
#define S6_GREG1_BOOT_CFG0_AIMSTRONG 1
#define S6_GREG1_BOOT_CFG0_MINIBOOTDL 2
#define S6_GREG1_BOOT_CFG0_OCDGPIO8SET 5
#define S6_GREG1_BOOT_CFG0_OCDGPIOENA 6
#define S6_GREG1_BOOT_CFG0_DOWNSTREAM 7
#define S6_GREG1_BOOT_CFG0_PLLSYSDIV 8
#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_300MHZ 1
#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_240MHZ 2
#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_200MHZ 3
#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_150MHZ 4
#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_120MHZ 5
#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_40MHZ 6
#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_MASK 7
#define S6_GREG1_BOOT_CFG0_BALHSLMS 12
#define S6_GREG1_BOOT_CFG0_BALHSNB 18
#define S6_GREG1_BOOT_CFG0_BALHSXAD 24
#define S6_GREG1_BOOT_CFG1 0x214
#define S6_GREG1_BOOT_CFG1_PCIE1LANE 1
#define S6_GREG1_BOOT_CFG1_MPLLPRESCALE 2
#define S6_GREG1_BOOT_CFG1_MPLLNCY 4
#define S6_GREG1_BOOT_CFG1_MPLLNCY5 9
#define S6_GREG1_BOOT_CFG1_BALHSREST 14
#define S6_GREG1_BOOT_CFG1_BALHSPSMEMS 20
#define S6_GREG1_BOOT_CFG1_BALLSGI 26
#define S6_GREG1_BOOT_CFG2 0x218
#define S6_GREG1_BOOT_CFG2_PEID 0
#define S6_GREG1_BOOT_CFG3 0x21C
#define S6_GREG1_DRAMBUSYHOLDOF 0x220
#define S6_GREG1_DRAMBUSYHOLDOF_XT0 0
#define S6_GREG1_DRAMBUSYHOLDOF_XT1 4
#define S6_GREG1_DRAMBUSYHOLDOF_XT_MASK 7
#define S6_GREG1_PCIEBAR1SIZE 0x224
#define S6_GREG1_PCIEBAR2SIZE 0x228
#define S6_GREG1_PCIEVENDOR 0x22C
#define S6_GREG1_PCIEDEVICE 0x230
#define S6_GREG1_PCIEREV 0x234
#define S6_GREG1_PCIECLASS 0x238
#define S6_GREG1_XT1DCACHEMISS 0x240
#define S6_GREG1_XT1ICACHEMISS 0x244
#define S6_GREG1_HWSEMAPHORE(n) (0x400 + 4 * (n))
#define S6_GREG1_HWSEMAPHORE_NB 16
/* peripheral interrupt numbers */
#define S6_INTC_GPIO(n) (n) /* 0..3 */
#define S6_INTC_I2C 4
#define S6_INTC_SPI 5
#define S6_INTC_NB_ERR 6
#define S6_INTC_DMA_LMSERR 7
#define S6_INTC_DMA_LMSLOWWMRK(n) (8 + (n)) /* 0..11 */
#define S6_INTC_DMA_LMSPENDCNT(n) (20 + (n)) /* 0..11 */
#define S6_INTC_DMA HOSTLOWWMRK(n) (32 + (n)) /* 0..6 */
#define S6_INTC_DMA_HOSTPENDCNT(n) (39 + (n)) /* 0..6 */
#define S6_INTC_DMA_HOSTERR 46
#define S6_INTC_UART(n) (47 + (n)) /* 0..1 */
#define S6_INTC_XAD 49
#define S6_INTC_NI_ERR 50
#define S6_INTC_NI_INFIFOFULL 51
#define S6_INTC_DMA_NIERR 52
#define S6_INTC_DMA_NILOWWMRK(n) (53 + (n)) /* 0..3 */
#define S6_INTC_DMA_NIPENDCNT(n) (57 + (n)) /* 0..3 */
#define S6_INTC_DDR 61
#define S6_INTC_NS_ERR 62
#define S6_INTC_EFI_CFGERR 63
#define S6_INTC_EFI_ISEFTEST 64
#define S6_INTC_EFI_WRITEERR 65
#define S6_INTC_NMI_TIMER 66
#define S6_INTC_PLLLOCK_SYS 67
#define S6_INTC_PLLLOCK_IO 68
#define S6_INTC_PLLLOCK_AIM 69
#define S6_INTC_PLLLOCK_DP0 70
#define S6_INTC_PLLLOCK_DP2 71
#define S6_INTC_I2S_ERR 72
#define S6_INTC_GMAC_STAT 73
#define S6_INTC_GMAC_ERR 74
#define S6_INTC_GIB_ERR 75
#define S6_INTC_PCIE_ERR 76
#define S6_INTC_PCIE_MSI(n) (77 + (n)) /* 0..3 */
#define S6_INTC_PCIE_INTA 81
#define S6_INTC_PCIE_INTB 82
#define S6_INTC_PCIE_INTC 83
#define S6_INTC_PCIE_INTD 84
#define S6_INTC_SW(n) (85 + (n)) /* 0..9 */
#define S6_INTC_SW_ENABLE(n) (85 + 256 + (n))
#define S6_INTC_DMA_DP_ERR 95
#define S6_INTC_DMA_DPLOWWMRK(n) (96 + (n)) /* 0..3 */
#define S6_INTC_DMA_DPPENDCNT(n) (100 + (n)) /* 0..3 */
#define S6_INTC_DMA_DPTERMCNT(n) (104 + (n)) /* 0..3 */
#define S6_INTC_TIMER0 108
#define S6_INTC_TIMER1 109
#define S6_INTC_DMA_HOSTTERMCNT(n) (110 + (n)) /* 0..6 */
#endif /* __XTENSA_S6000_HARDWARE_H */
arch/xtensa/variants/s6000/include/variant/irq.h 0 → 100644
浏览文件 @ 4e76c5cc
#ifndef __XTENSA_S6000_IRQ_H
#define __XTENSA_S6000_IRQ_H
#define NO_IRQ (-1)
extern void variant_irq_enable(unsigned int irq);
extern void variant_irq_disable(unsigned int irq);
#endif /* __XTENSA_S6000_IRQ_H */
arch/xtensa/variants/s6000/include/variant/tie-asm.h 0 → 100644
浏览文件 @ 4e76c5cc
/*
* This header file contains assembly-language definitions (assembly
* macros, etc.) for this specific Xtensa processor's TIE extensions
* and options. It is customized to this Xtensa processor configuration.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1999-2008 Tensilica Inc.
*/
#ifndef _XTENSA_CORE_TIE_ASM_H
#define _XTENSA_CORE_TIE_ASM_H
/* Selection parameter values for save-area save/restore macros: */
/* Option vs. TIE: */
#define XTHAL_SAS_TIE 0x0001 /* custom extension or coprocessor */
#define XTHAL_SAS_OPT 0x0002 /* optional (and not a coprocessor) */
/* Whether used automatically by compiler: */
#define XTHAL_SAS_NOCC 0x0004 /* not used by compiler w/o special opts/code */
#define XTHAL_SAS_CC 0x0008 /* used by compiler without special opts/code */
/* ABI handling across function calls: */
#define XTHAL_SAS_CALR 0x0010 /* caller-saved */
#define XTHAL_SAS_CALE 0x0020 /* callee-saved */
#define XTHAL_SAS_GLOB 0x0040 /* global across function calls (in thread) */
/* Misc */
#define XTHAL_SAS_ALL 0xFFFF /* include all default NCP contents */
/* Macro to save all non-coprocessor (extra) custom TIE and optional state
* (not including zero-overhead loop registers).
* Save area ptr (clobbered): ptr (16 byte aligned)
* Scratch regs (clobbered): at1..at4 (only first XCHAL_NCP_NUM_ATMPS needed)
*/
.macro xchal_ncp_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL
xchal_sa_start \continue, \ofs
.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
xchal_sa_align \ptr, 0, 1024-4, 4, 4
rsr \at1, BR // boolean option
s32i \at1, \ptr, .Lxchal_ofs_ + 0
.set .Lxchal_ofs_, .Lxchal_ofs_ + 4
.endif
.endm // xchal_ncp_store
/* Macro to save all non-coprocessor (extra) custom TIE and optional state
* (not including zero-overhead loop registers).
* Save area ptr (clobbered): ptr (16 byte aligned)
* Scratch regs (clobbered): at1..at4 (only first XCHAL_NCP_NUM_ATMPS needed)
*/
.macro xchal_ncp_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL
xchal_sa_start \continue, \ofs
.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
xchal_sa_align \ptr, 0, 1024-4, 4, 4
l32i \at1, \ptr, .Lxchal_ofs_ + 0
wsr \at1, BR // boolean option
.set .Lxchal_ofs_, .Lxchal_ofs_ + 4
.endif
.endm // xchal_ncp_load
#define XCHAL_NCP_NUM_ATMPS 1
/* Macro to save the state of TIE coprocessor FPU.
* Save area ptr (clobbered): ptr (16 byte aligned)
* Scratch regs (clobbered): at1..at4 (only first XCHAL_CP0_NUM_ATMPS needed)
*/
#define xchal_cp_FPU_store xchal_cp0_store
/* #define xchal_cp_FPU_store_a2 xchal_cp0_store a2 a3 a4 a5 a6 */
.macro xchal_cp0_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL
xchal_sa_start \continue, \ofs
.ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
xchal_sa_align \ptr, 0, 0, 1, 16
rur232 \at1 // FCR
s32i \at1, \ptr, 0
rur233 \at1 // FSR
s32i \at1, \ptr, 4
SSI f0, \ptr, 8
SSI f1, \ptr, 12
SSI f2, \ptr, 16
SSI f3, \ptr, 20
SSI f4, \ptr, 24
SSI f5, \ptr, 28
SSI f6, \ptr, 32
SSI f7, \ptr, 36
SSI f8, \ptr, 40
SSI f9, \ptr, 44
SSI f10, \ptr, 48
SSI f11, \ptr, 52
SSI f12, \ptr, 56
SSI f13, \ptr, 60
SSI f14, \ptr, 64
SSI f15, \ptr, 68
.set .Lxchal_ofs_, .Lxchal_ofs_ + 72
.endif
.endm // xchal_cp0_store
/* Macro to restore the state of TIE coprocessor FPU.
* Save area ptr (clobbered): ptr (16 byte aligned)
* Scratch regs (clobbered): at1..at4 (only first XCHAL_CP0_NUM_ATMPS needed)
*/
#define xchal_cp_FPU_load xchal_cp0_load
/* #define xchal_cp_FPU_load_a2 xchal_cp0_load a2 a3 a4 a5 a6 */
.macro xchal_cp0_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL
xchal_sa_start \continue, \ofs
.ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
xchal_sa_align \ptr, 0, 0, 1, 16
l32i \at1, \ptr, 0
wur232 \at1 // FCR
l32i \at1, \ptr, 4
wur233 \at1 // FSR
LSI f0, \ptr, 8
LSI f1, \ptr, 12
LSI f2, \ptr, 16
LSI f3, \ptr, 20
LSI f4, \ptr, 24
LSI f5, \ptr, 28
LSI f6, \ptr, 32
LSI f7, \ptr, 36
LSI f8, \ptr, 40
LSI f9, \ptr, 44
LSI f10, \ptr, 48
LSI f11, \ptr, 52
LSI f12, \ptr, 56
LSI f13, \ptr, 60
LSI f14, \ptr, 64
LSI f15, \ptr, 68
.set .Lxchal_ofs_, .Lxchal_ofs_ + 72
.endif
.endm // xchal_cp0_load
#define XCHAL_CP0_NUM_ATMPS 1
/* Macro to save the state of TIE coprocessor XAD.
* Save area ptr (clobbered): ptr (16 byte aligned)
* Scratch regs (clobbered): at1..at4 (only first XCHAL_CP6_NUM_ATMPS needed)
*/
#define xchal_cp_XAD_store xchal_cp6_store
/* #define xchal_cp_XAD_store_a2 xchal_cp6_store a2 a3 a4 a5 a6 */
.macro xchal_cp6_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL
xchal_sa_start \continue, \ofs
.ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
xchal_sa_align \ptr, 0, 0, 1, 16
rur0 \at1 // LDCBHI
s32i \at1, \ptr, 0
rur1 \at1 // LDCBLO
s32i \at1, \ptr, 4
rur2 \at1 // STCBHI
s32i \at1, \ptr, 8
rur3 \at1 // STCBLO
s32i \at1, \ptr, 12
rur8 \at1 // LDBRBASE
s32i \at1, \ptr, 16
rur9 \at1 // LDBROFF
s32i \at1, \ptr, 20
rur10 \at1 // LDBRINC
s32i \at1, \ptr, 24
rur11 \at1 // STBRBASE
s32i \at1, \ptr, 28
rur12 \at1 // STBROFF
s32i \at1, \ptr, 32
rur13 \at1 // STBRINC
s32i \at1, \ptr, 36
rur24 \at1 // SCRATCH0
s32i \at1, \ptr, 40
rur25 \at1 // SCRATCH1
s32i \at1, \ptr, 44
rur26 \at1 // SCRATCH2
s32i \at1, \ptr, 48
rur27 \at1 // SCRATCH3
s32i \at1, \ptr, 52
WRAS128I wra0, \ptr, 64
WRAS128I wra1, \ptr, 80
WRAS128I wra2, \ptr, 96
WRAS128I wra3, \ptr, 112
WRAS128I wra4, \ptr, 128
WRAS128I wra5, \ptr, 144
WRAS128I wra6, \ptr, 160
WRAS128I wra7, \ptr, 176
WRAS128I wra8, \ptr, 192
WRAS128I wra9, \ptr, 208
WRAS128I wra10, \ptr, 224
WRAS128I wra11, \ptr, 240
WRAS128I wra12, \ptr, 256
WRAS128I wra13, \ptr, 272
WRAS128I wra14, \ptr, 288
WRAS128I wra15, \ptr, 304
WRBS128I wrb0, \ptr, 320
WRBS128I wrb1, \ptr, 336
WRBS128I wrb2, \ptr, 352
WRBS128I wrb3, \ptr, 368
WRBS128I wrb4, \ptr, 384
WRBS128I wrb5, \ptr, 400
WRBS128I wrb6, \ptr, 416
WRBS128I wrb7, \ptr, 432
WRBS128I wrb8, \ptr, 448
WRBS128I wrb9, \ptr, 464
WRBS128I wrb10, \ptr, 480
WRBS128I wrb11, \ptr, 496
WRBS128I wrb12, \ptr, 512
WRBS128I wrb13, \ptr, 528
WRBS128I wrb14, \ptr, 544
WRBS128I wrb15, \ptr, 560
.set .Lxchal_ofs_, .Lxchal_ofs_ + 576
.endif
.endm // xchal_cp6_store
/* Macro to restore the state of TIE coprocessor XAD.
* Save area ptr (clobbered): ptr (16 byte aligned)
* Scratch regs (clobbered): at1..at4 (only first XCHAL_CP6_NUM_ATMPS needed)
*/
#define xchal_cp_XAD_load xchal_cp6_load
/* #define xchal_cp_XAD_load_a2 xchal_cp6_load a2 a3 a4 a5 a6 */
.macro xchal_cp6_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL
xchal_sa_start \continue, \ofs
.ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
xchal_sa_align \ptr, 0, 0, 1, 16
l32i \at1, \ptr, 0
wur0 \at1 // LDCBHI
l32i \at1, \ptr, 4
wur1 \at1 // LDCBLO
l32i \at1, \ptr, 8
wur2 \at1 // STCBHI
l32i \at1, \ptr, 12
wur3 \at1 // STCBLO
l32i \at1, \ptr, 16
wur8 \at1 // LDBRBASE
l32i \at1, \ptr, 20
wur9 \at1 // LDBROFF
l32i \at1, \ptr, 24
wur10 \at1 // LDBRINC
l32i \at1, \ptr, 28
wur11 \at1 // STBRBASE
l32i \at1, \ptr, 32
wur12 \at1 // STBROFF
l32i \at1, \ptr, 36
wur13 \at1 // STBRINC
l32i \at1, \ptr, 40
wur24 \at1 // SCRATCH0
l32i \at1, \ptr, 44
wur25 \at1 // SCRATCH1
l32i \at1, \ptr, 48
wur26 \at1 // SCRATCH2
l32i \at1, \ptr, 52
wur27 \at1 // SCRATCH3
WRBL128I wrb0, \ptr, 320
WRBL128I wrb1, \ptr, 336
WRBL128I wrb2, \ptr, 352
WRBL128I wrb3, \ptr, 368
WRBL128I wrb4, \ptr, 384
WRBL128I wrb5, \ptr, 400
WRBL128I wrb6, \ptr, 416
WRBL128I wrb7, \ptr, 432
WRBL128I wrb8, \ptr, 448
WRBL128I wrb9, \ptr, 464
WRBL128I wrb10, \ptr, 480
WRBL128I wrb11, \ptr, 496
WRBL128I wrb12, \ptr, 512
WRBL128I wrb13, \ptr, 528
WRBL128I wrb14, \ptr, 544
WRBL128I wrb15, \ptr, 560
WRAL128I wra0, \ptr, 64
WRAL128I wra1, \ptr, 80
WRAL128I wra2, \ptr, 96
WRAL128I wra3, \ptr, 112
WRAL128I wra4, \ptr, 128
WRAL128I wra5, \ptr, 144
WRAL128I wra6, \ptr, 160
WRAL128I wra7, \ptr, 176
WRAL128I wra8, \ptr, 192
WRAL128I wra9, \ptr, 208
WRAL128I wra10, \ptr, 224
WRAL128I wra11, \ptr, 240
WRAL128I wra12, \ptr, 256
WRAL128I wra13, \ptr, 272
WRAL128I wra14, \ptr, 288
WRAL128I wra15, \ptr, 304
.set .Lxchal_ofs_, .Lxchal_ofs_ + 576
.endif
.endm // xchal_cp6_load
#define XCHAL_CP6_NUM_ATMPS 1
#define XCHAL_SA_NUM_ATMPS 1
/* Empty macros for unconfigured coprocessors: */
.macro xchal_cp1_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp1_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp2_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp2_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp3_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp3_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp4_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp4_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp5_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp5_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp7_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp7_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
#endif /*_XTENSA_CORE_TIE_ASM_H*/
arch/xtensa/variants/s6000/include/variant/tie.h 0 → 100644
浏览文件 @ 4e76c5cc
/*
* This header file describes this specific Xtensa processor's TIE extensions
* that extend basic Xtensa core functionality. It is customized to this
* Xtensa processor configuration.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1999-2008 Tensilica Inc.
*/
#ifndef _XTENSA_CORE_TIE_H
#define _XTENSA_CORE_TIE_H
#define XCHAL_CP_NUM 2 /* number of coprocessors */
#define XCHAL_CP_MAX 7 /* max CP ID + 1 (0 if none) */
#define XCHAL_CP_MASK 0x41 /* bitmask of all CPs by ID */
#define XCHAL_CP_PORT_MASK 0x00 /* bitmask of only port CPs */
/* Basic parameters of each coprocessor: */
#define XCHAL_CP0_NAME "FPU"
#define XCHAL_CP0_IDENT FPU
#define XCHAL_CP0_SA_SIZE 72 /* size of state save area */
#define XCHAL_CP0_SA_ALIGN 4 /* min alignment of save area */
#define XCHAL_CP_ID_FPU 0 /* coprocessor ID (0..7) */
#define XCHAL_CP6_NAME "XAD"
#define XCHAL_CP6_IDENT XAD
#define XCHAL_CP6_SA_SIZE 576 /* size of state save area */
#define XCHAL_CP6_SA_ALIGN 16 /* min alignment of save area */
#define XCHAL_CP_ID_XAD 6 /* coprocessor ID (0..7) */
/* Filler info for unassigned coprocessors, to simplify arrays etc: */
#define XCHAL_CP1_SA_SIZE 0
#define XCHAL_CP1_SA_ALIGN 1
#define XCHAL_CP2_SA_SIZE 0
#define XCHAL_CP2_SA_ALIGN 1
#define XCHAL_CP3_SA_SIZE 0
#define XCHAL_CP3_SA_ALIGN 1
#define XCHAL_CP4_SA_SIZE 0
#define XCHAL_CP4_SA_ALIGN 1
#define XCHAL_CP5_SA_SIZE 0
#define XCHAL_CP5_SA_ALIGN 1
#define XCHAL_CP7_SA_SIZE 0
#define XCHAL_CP7_SA_ALIGN 1
/* Save area for non-coprocessor optional and custom (TIE) state: */
#define XCHAL_NCP_SA_SIZE 4
#define XCHAL_NCP_SA_ALIGN 4
/* Total save area for optional and custom state (NCP + CPn): */
#define XCHAL_TOTAL_SA_SIZE 672 /* with 16-byte align padding */
#define XCHAL_TOTAL_SA_ALIGN 16 /* actual minimum alignment */
/*
* Detailed contents of save areas.
* NOTE: caller must define the XCHAL_SA_REG macro (not defined here)
* before expanding the XCHAL_xxx_SA_LIST() macros.
*
* XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize,
* dbnum,base,regnum,bitsz,gapsz,reset,x...)
*
* s = passed from XCHAL_*_LIST(s), eg. to select how to expand
* ccused = set if used by compiler without special options or code
* abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global)
* kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg)
* opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg)
* name = lowercase reg name (no quotes)
* galign = group byte alignment (power of 2) (galign >= align)
* align = register byte alignment (power of 2)
* asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz)
* (not including any pad bytes required to galign this or next reg)
* dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>)
* base = reg shortname w/o index (or sr=special, ur=TIE user reg)
* regnum = reg index in regfile, or special/TIE-user reg number
* bitsz = number of significant bits (regfile width, or ur/sr mask bits)
* gapsz = intervening bits, if bitsz bits not stored contiguously
* (padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize)
* reset = register reset value (or 0 if undefined at reset)
* x = reserved for future use (0 until then)
*
* To filter out certain registers, e.g. to expand only the non-global
* registers used by the compiler, you can do something like this:
*
* #define XCHAL_SA_REG(s,ccused,p...) SELCC##ccused(p)
* #define SELCC0(p...)
* #define SELCC1(abikind,p...) SELAK##abikind(p)
* #define SELAK0(p...) REG(p)
* #define SELAK1(p...) REG(p)
* #define SELAK2(p...)
* #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \
* ...what you want to expand...
*/
#define XCHAL_NCP_SA_NUM 1
#define XCHAL_NCP_SA_LIST(s) \
XCHAL_SA_REG(s,0,0,0,1, br, 4, 4, 4,0x0204, sr,4 , 16,0,0,0)
#define XCHAL_CP0_SA_NUM 18
#define XCHAL_CP0_SA_LIST(s) \
XCHAL_SA_REG(s,0,0,1,0, fcr, 4, 4, 4,0x03E8, ur,232, 32,0,0,0) \
XCHAL_SA_REG(s,0,0,1,0, fsr, 4, 4, 4,0x03E9, ur,233, 32,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, f0, 4, 4, 4,0x0030, f,0 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, f1, 4, 4, 4,0x0031, f,1 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, f2, 4, 4, 4,0x0032, f,2 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, f3, 4, 4, 4,0x0033, f,3 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, f4, 4, 4, 4,0x0034, f,4 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, f5, 4, 4, 4,0x0035, f,5 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, f6, 4, 4, 4,0x0036, f,6 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, f7, 4, 4, 4,0x0037, f,7 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, f8, 4, 4, 4,0x0038, f,8 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, f9, 4, 4, 4,0x0039, f,9 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, f10, 4, 4, 4,0x003A, f,10 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, f11, 4, 4, 4,0x003B, f,11 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, f12, 4, 4, 4,0x003C, f,12 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, f13, 4, 4, 4,0x003D, f,13 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, f14, 4, 4, 4,0x003E, f,14 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, f15, 4, 4, 4,0x003F, f,15 , 32,0,0,0)
#define XCHAL_CP1_SA_NUM 0
#define XCHAL_CP1_SA_LIST(s) /* empty */
#define XCHAL_CP2_SA_NUM 0
#define XCHAL_CP2_SA_LIST(s) /* empty */
#define XCHAL_CP3_SA_NUM 0
#define XCHAL_CP3_SA_LIST(s) /* empty */
#define XCHAL_CP4_SA_NUM 0
#define XCHAL_CP4_SA_LIST(s) /* empty */
#define XCHAL_CP5_SA_NUM 0
#define XCHAL_CP5_SA_LIST(s) /* empty */
#define XCHAL_CP6_SA_NUM 46
#define XCHAL_CP6_SA_LIST(s) \
XCHAL_SA_REG(s,0,0,1,0, ldcbhi,16, 4, 4,0x0300, ur,0 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,1,0, ldcblo, 4, 4, 4,0x0301, ur,1 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,1,0, stcbhi, 4, 4, 4,0x0302, ur,2 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,1,0, stcblo, 4, 4, 4,0x0303, ur,3 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,1,0, ldbrbase, 4, 4, 4,0x0308, ur,8 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,1,0, ldbroff, 4, 4, 4,0x0309, ur,9 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,1,0, ldbrinc, 4, 4, 4,0x030A, ur,10 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,1,0, stbrbase, 4, 4, 4,0x030B, ur,11 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,1,0, stbroff, 4, 4, 4,0x030C, ur,12 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,1,0, stbrinc, 4, 4, 4,0x030D, ur,13 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,1,0, scratch0, 4, 4, 4,0x0318, ur,24 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,1,0, scratch1, 4, 4, 4,0x0319, ur,25 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,1,0, scratch2, 4, 4, 4,0x031A, ur,26 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,1,0, scratch3, 4, 4, 4,0x031B, ur,27 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wra0,16,16,16,0x1010, wra,0 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wra1,16,16,16,0x1011, wra,1 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wra2,16,16,16,0x1012, wra,2 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wra3,16,16,16,0x1013, wra,3 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wra4,16,16,16,0x1014, wra,4 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wra5,16,16,16,0x1015, wra,5 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wra6,16,16,16,0x1016, wra,6 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wra7,16,16,16,0x1017, wra,7 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wra8,16,16,16,0x1018, wra,8 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wra9,16,16,16,0x1019, wra,9 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wra10,16,16,16,0x101A, wra,10 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wra11,16,16,16,0x101B, wra,11 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wra12,16,16,16,0x101C, wra,12 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wra13,16,16,16,0x101D, wra,13 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wra14,16,16,16,0x101E, wra,14 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wra15,16,16,16,0x101F, wra,15 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wrb0,16,16,16,0x1020, wrb,0 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wrb1,16,16,16,0x1021, wrb,1 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wrb2,16,16,16,0x1022, wrb,2 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wrb3,16,16,16,0x1023, wrb,3 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wrb4,16,16,16,0x1024, wrb,4 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wrb5,16,16,16,0x1025, wrb,5 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wrb6,16,16,16,0x1026, wrb,6 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wrb7,16,16,16,0x1027, wrb,7 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wrb8,16,16,16,0x1028, wrb,8 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wrb9,16,16,16,0x1029, wrb,9 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wrb10,16,16,16,0x102A, wrb,10 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wrb11,16,16,16,0x102B, wrb,11 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wrb12,16,16,16,0x102C, wrb,12 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wrb13,16,16,16,0x102D, wrb,13 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wrb14,16,16,16,0x102E, wrb,14 ,128,0,0,0) \
XCHAL_SA_REG(s,0,0,2,0, wrb15,16,16,16,0x102F, wrb,15 ,128,0,0,0)
#define XCHAL_CP7_SA_NUM 0
#define XCHAL_CP7_SA_LIST(s) /* empty */
/* Byte length of instruction from its first nibble (op0 field), per FLIX. */
#define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8
#endif /*_XTENSA_CORE_TIE_H*/
arch/xtensa/variants/s6000/irq.c 0 → 100644
浏览文件 @ 4e76c5cc
/*
* s6000 irq crossbar
*
* Copyright (c) 2009 emlix GmbH
* Authors: Johannes Weiner <jw@emlix.com>
* Oskar Schirmer <os@emlix.com>
*/
#include <linux/io.h>
#include <asm/irq.h>
#include <variant/hardware.h>
/* S6_REG_INTC */
#define INTC_STATUS 0x000
#define INTC_RAW 0x010
#define INTC_STATUS_AG 0x100
#define INTC_CFG(n) (0x200 + 4 * (n))
/*
* The s6000 has a crossbar that multiplexes interrupt output lines
* from the peripherals to input lines on the xtensa core.
*
* We leave the mapping decisions to the platform as it depends on the
* actually connected peripherals which distribution makes sense.
*/
extern const signed char *platform_irq_mappings[NR_IRQS];
static unsigned long scp_to_intc_enable[] = {
#define TO_INTC_ENABLE(n) (((n) << 1) + 1)
TO_INTC_ENABLE(0),
TO_INTC_ENABLE(1),
TO_INTC_ENABLE(2),
TO_INTC_ENABLE(3),
TO_INTC_ENABLE(4),
TO_INTC_ENABLE(5),
TO_INTC_ENABLE(6),
TO_INTC_ENABLE(7),
TO_INTC_ENABLE(8),
TO_INTC_ENABLE(9),
TO_INTC_ENABLE(10),
TO_INTC_ENABLE(11),
TO_INTC_ENABLE(12),
-1,
-1,
TO_INTC_ENABLE(13),
-1,
TO_INTC_ENABLE(14),
-1,
TO_INTC_ENABLE(15),
#undef TO_INTC_ENABLE
};
static void irq_set(unsigned int irq, int enable)
{
unsigned long en;
const signed char *m = platform_irq_mappings[irq];
if (!m)
return;
en = enable ? scp_to_intc_enable[irq] : 0;
while (*m >= 0) {
writel(en, S6_REG_INTC + INTC_CFG(*m));
m++;
}
}
void variant_irq_enable(unsigned int irq)
{
irq_set(irq, 1);
}
void variant_irq_disable(unsigned int irq)
{
irq_set(irq, 0);
}
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或