drm/i915: add basic MIPI DSI output support

This does not include any panel specific sub-encoders yet.

v2: Fix fixed mode handling (Daniel)

v3: Mostly based on Ville's review comments.
 - Fix MIPI_HS_TX_TIMEOUT.
 - DPI_ENABLE only for video mode.
 - Drop ULPS usage for now, use DEVICE_READY only.
 - Set MIPI_INIT_COUNT based on txclkesc.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/Makefile

@@ -21,6 +21,7 @@ i915-y := i915_drv.o i915_dma.o i915_irq.o \
 	  intel_display.o \
 	  intel_crt.o \
 	  intel_lvds.o \
+	  intel_dsi.o \
 	  intel_dsi_cmd.o \
 	  intel_bios.o \
 	  intel_ddi.o \

drivers/gpu/drm/i915/intel_drv.h

@@ -525,6 +525,7 @@ extern void intel_mark_fb_busy(struct drm_i915_gem_object *obj,
 			       struct intel_ring_buffer *ring);
 extern void intel_mark_idle(struct drm_device *dev);
 extern void intel_lvds_init(struct drm_device *dev);
+extern bool intel_dsi_init(struct drm_device *dev);
 extern bool intel_is_dual_link_lvds(struct drm_device *dev);
 extern void intel_dp_init(struct drm_device *dev, int output_reg,
 			  enum port port);

drivers/gpu/drm/i915/intel_dsi.c

+/*
+ * Copyright © 2013 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Author: Jani Nikula <jani.nikula@intel.com>
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_edid.h>
+#include <drm/i915_drm.h>
+#include <linux/slab.h>
+#include "i915_drv.h"
+#include "intel_drv.h"
+#include "intel_dsi.h"
+#include "intel_dsi_cmd.h"
+
+/* the sub-encoders aka panel drivers */
+static const struct intel_dsi_device intel_dsi_devices[] = {
+};
+
+static struct intel_dsi *intel_attached_dsi(struct drm_connector *connector)
+{
+	return container_of(intel_attached_encoder(connector),
+			    struct intel_dsi, base);
+}
+
+static inline bool is_vid_mode(struct intel_dsi *intel_dsi)
+{
+	return intel_dsi->dev.type == INTEL_DSI_VIDEO_MODE;
+}
+
+static inline bool is_cmd_mode(struct intel_dsi *intel_dsi)
+{
+	return intel_dsi->dev.type == INTEL_DSI_COMMAND_MODE;
+}
+
+static void intel_dsi_hot_plug(struct intel_encoder *encoder)
+{
+	DRM_DEBUG_KMS("\n");
+}
+
+static bool intel_dsi_compute_config(struct intel_encoder *encoder,
+				     struct intel_crtc_config *config)
+{
+	struct intel_dsi *intel_dsi = container_of(encoder, struct intel_dsi,
+						   base);
+	struct intel_connector *intel_connector = intel_dsi->attached_connector;
+	struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
+	struct drm_display_mode *adjusted_mode = &config->adjusted_mode;
+	struct drm_display_mode *mode = &config->requested_mode;
+
+	DRM_DEBUG_KMS("\n");
+
+	if (fixed_mode)
+		intel_fixed_panel_mode(fixed_mode, adjusted_mode);
+
+	if (intel_dsi->dev.dev_ops->mode_fixup)
+		return intel_dsi->dev.dev_ops->mode_fixup(&intel_dsi->dev,
+							  mode, adjusted_mode);
+
+	return true;
+}
+
+static void intel_dsi_pre_pll_enable(struct intel_encoder *encoder)
+{
+	DRM_DEBUG_KMS("\n");
+}
+
+static void intel_dsi_pre_enable(struct intel_encoder *encoder)
+{
+	DRM_DEBUG_KMS("\n");
+}
+
+static void intel_dsi_enable(struct intel_encoder *encoder)
+{
+	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
+	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+	int pipe = intel_crtc->pipe;
+	u32 temp;
+
+	DRM_DEBUG_KMS("\n");
+
+	temp = I915_READ(MIPI_DEVICE_READY(pipe));
+	if ((temp & DEVICE_READY) == 0) {
+		temp &= ~ULPS_STATE_MASK;
+		I915_WRITE(MIPI_DEVICE_READY(pipe), temp | DEVICE_READY);
+	} else if (temp & ULPS_STATE_MASK) {
+		temp &= ~ULPS_STATE_MASK;
+		I915_WRITE(MIPI_DEVICE_READY(pipe), temp | ULPS_STATE_EXIT);
+		/*
+		 * We need to ensure that there is a minimum of 1 ms time
+		 * available before clearing the UPLS exit state.
+		 */
+		msleep(2);
+		I915_WRITE(MIPI_DEVICE_READY(pipe), temp);
+	}
+
+	if (is_cmd_mode(intel_dsi))
+		I915_WRITE(MIPI_MAX_RETURN_PKT_SIZE(pipe), 8 * 4);
+
+	if (is_vid_mode(intel_dsi)) {
+		msleep(20); /* XXX */
+		dpi_send_cmd(intel_dsi, TURN_ON);
+		msleep(100);
+
+		/* assert ip_tg_enable signal */
+		temp = I915_READ(MIPI_PORT_CTRL(pipe));
+		I915_WRITE(MIPI_PORT_CTRL(pipe), temp | DPI_ENABLE);
+		POSTING_READ(MIPI_PORT_CTRL(pipe));
+	}
+
+	intel_dsi->dev.dev_ops->enable(&intel_dsi->dev);
+}
+
+static void intel_dsi_disable(struct intel_encoder *encoder)
+{
+	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
+	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+	int pipe = intel_crtc->pipe;
+	u32 temp;
+
+	DRM_DEBUG_KMS("\n");
+
+	intel_dsi->dev.dev_ops->disable(&intel_dsi->dev);
+
+	if (is_vid_mode(intel_dsi)) {
+		dpi_send_cmd(intel_dsi, SHUTDOWN);
+		msleep(10);
+
+		/* de-assert ip_tg_enable signal */
+		temp = I915_READ(MIPI_PORT_CTRL(pipe));
+		I915_WRITE(MIPI_PORT_CTRL(pipe), temp & ~DPI_ENABLE);
+		POSTING_READ(MIPI_PORT_CTRL(pipe));
+
+		msleep(2);
+	}
+
+	temp = I915_READ(MIPI_DEVICE_READY(pipe));
+	if (temp & DEVICE_READY) {
+		temp &= ~DEVICE_READY;
+		temp &= ~ULPS_STATE_MASK;
+		I915_WRITE(MIPI_DEVICE_READY(pipe), temp);
+	}
+}
+
+static void intel_dsi_post_disable(struct intel_encoder *encoder)
+{
+	DRM_DEBUG_KMS("\n");
+}
+
+static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
+				   enum pipe *pipe)
+{
+	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+	u32 port, func;
+	enum pipe p;
+
+	DRM_DEBUG_KMS("\n");
+
+	/* XXX: this only works for one DSI output */
+	for (p = PIPE_A; p <= PIPE_B; p++) {
+		port = I915_READ(MIPI_PORT_CTRL(p));
+		func = I915_READ(MIPI_DSI_FUNC_PRG(p));
+
+		if ((port & DPI_ENABLE) || (func & CMD_MODE_DATA_WIDTH_MASK)) {
+			if (I915_READ(MIPI_DEVICE_READY(p)) & DEVICE_READY) {
+				*pipe = p;
+				return true;
+			}
+		}
+	}
+
+	return false;
+}
+
+static void intel_dsi_get_config(struct intel_encoder *encoder,
+				 struct intel_crtc_config *pipe_config)
+{
+	DRM_DEBUG_KMS("\n");
+
+	/* XXX: read flags, set to adjusted_mode */
+}
+
+static int intel_dsi_mode_valid(struct drm_connector *connector,
+				struct drm_display_mode *mode)
+{
+	struct intel_connector *intel_connector = to_intel_connector(connector);
+	struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
+	struct intel_dsi *intel_dsi = intel_attached_dsi(connector);
+
+	DRM_DEBUG_KMS("\n");
+
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN) {
+		DRM_DEBUG_KMS("MODE_NO_DBLESCAN\n");
+		return MODE_NO_DBLESCAN;
+	}
+
+	if (fixed_mode) {
+		if (mode->hdisplay > fixed_mode->hdisplay)
+			return MODE_PANEL;
+		if (mode->vdisplay > fixed_mode->vdisplay)
+			return MODE_PANEL;
+	}
+
+	return intel_dsi->dev.dev_ops->mode_valid(&intel_dsi->dev, mode);
+}
+
+/* return txclkesc cycles in terms of divider and duration in us */
+static u16 txclkesc(u32 divider, unsigned int us)
+{
+	switch (divider) {
+	case ESCAPE_CLOCK_DIVIDER_1:
+	default:
+		return 20 * us;
+	case ESCAPE_CLOCK_DIVIDER_2:
+		return 10 * us;
+	case ESCAPE_CLOCK_DIVIDER_4:
+		return 5 * us;
+	}
+}
+
+/* return pixels in terms of txbyteclkhs */
+static u16 txbyteclkhs(u16 pixels, int bpp, int lane_count)
+{
+	return DIV_ROUND_UP(DIV_ROUND_UP(pixels * bpp, 8), lane_count);
+}
+
+static void set_dsi_timings(struct drm_encoder *encoder,
+			    const struct drm_display_mode *mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
+	struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
+	int pipe = intel_crtc->pipe;
+	unsigned int bpp = intel_crtc->config.pipe_bpp;
+	unsigned int lane_count = intel_dsi->lane_count;
+
+	u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp;
+
+	hactive = mode->hdisplay;
+	hfp = mode->hsync_start - mode->hdisplay;
+	hsync = mode->hsync_end - mode->hsync_start;
+	hbp = mode->htotal - mode->hsync_end;
+
+	vfp = mode->vsync_start - mode->vdisplay;
+	vsync = mode->vsync_end - mode->vsync_start;
+	vbp = mode->vtotal - mode->vsync_end;
+
+	/* horizontal values are in terms of high speed byte clock */
+	hactive = txbyteclkhs(hactive, bpp, lane_count);
+	hfp = txbyteclkhs(hfp, bpp, lane_count);
+	hsync = txbyteclkhs(hsync, bpp, lane_count);
+	hbp = txbyteclkhs(hbp, bpp, lane_count);
+
+	I915_WRITE(MIPI_HACTIVE_AREA_COUNT(pipe), hactive);
+	I915_WRITE(MIPI_HFP_COUNT(pipe), hfp);
+
+	/* meaningful for video mode non-burst sync pulse mode only, can be zero
+	 * for non-burst sync events and burst modes */
+	I915_WRITE(MIPI_HSYNC_PADDING_COUNT(pipe), hsync);
+	I915_WRITE(MIPI_HBP_COUNT(pipe), hbp);
+
+	/* vertical values are in terms of lines */
+	I915_WRITE(MIPI_VFP_COUNT(pipe), vfp);
+	I915_WRITE(MIPI_VSYNC_PADDING_COUNT(pipe), vsync);
+	I915_WRITE(MIPI_VBP_COUNT(pipe), vbp);
+}
+
+static void intel_dsi_mode_set(struct intel_encoder *intel_encoder)
+{
+	struct drm_encoder *encoder = &intel_encoder->base;
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
+	struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
+	struct drm_display_mode *adjusted_mode =
+		&intel_crtc->config.adjusted_mode;
+	int pipe = intel_crtc->pipe;
+	unsigned int bpp = intel_crtc->config.pipe_bpp;
+	u32 val, tmp;
+
+	DRM_DEBUG_KMS("pipe %d\n", pipe);
+
+	/* escape clock divider, 20MHz, shared for A and C. device ready must be
+	 * off when doing this! txclkesc? */
+	tmp = I915_READ(MIPI_CTRL(0));
+	tmp &= ~ESCAPE_CLOCK_DIVIDER_MASK;
+	I915_WRITE(MIPI_CTRL(0), tmp | ESCAPE_CLOCK_DIVIDER_1);
+
+	/* read request priority is per pipe */
+	tmp = I915_READ(MIPI_CTRL(pipe));
+	tmp &= ~READ_REQUEST_PRIORITY_MASK;
+	I915_WRITE(MIPI_CTRL(pipe), tmp | READ_REQUEST_PRIORITY_HIGH);
+
+	/* XXX: why here, why like this? handling in irq handler?! */
+	I915_WRITE(MIPI_INTR_STAT(pipe), 0xffffffff);
+	I915_WRITE(MIPI_INTR_EN(pipe), 0xffffffff);
+
+	I915_WRITE(MIPI_DPHY_PARAM(pipe),
+		   0x3c << EXIT_ZERO_COUNT_SHIFT |
+		   0x1f << TRAIL_COUNT_SHIFT |
+		   0xc5 << CLK_ZERO_COUNT_SHIFT |
+		   0x1f << PREPARE_COUNT_SHIFT);
+
+	I915_WRITE(MIPI_DPI_RESOLUTION(pipe),
+		   adjusted_mode->vdisplay << VERTICAL_ADDRESS_SHIFT |
+		   adjusted_mode->hdisplay << HORIZONTAL_ADDRESS_SHIFT);
+
+	set_dsi_timings(encoder, adjusted_mode);
+
+	val = intel_dsi->lane_count << DATA_LANES_PRG_REG_SHIFT;
+	if (is_cmd_mode(intel_dsi)) {
+		val |= intel_dsi->channel << CMD_MODE_CHANNEL_NUMBER_SHIFT;
+		val |= CMD_MODE_DATA_WIDTH_8_BIT; /* XXX */
+	} else {
+		val |= intel_dsi->channel << VID_MODE_CHANNEL_NUMBER_SHIFT;
+
+		/* XXX: cross-check bpp vs. pixel format? */
+		val |= intel_dsi->pixel_format;
+	}
+	I915_WRITE(MIPI_DSI_FUNC_PRG(pipe), val);
+
+	/* timeouts for recovery. one frame IIUC. if counter expires, EOT and
+	 * stop state. */
+
+	/*
+	 * In burst mode, value greater than one DPI line Time in byte clock
+	 * (txbyteclkhs) To timeout this timer 1+ of the above said value is
+	 * recommended.
+	 *
+	 * In non-burst mode, Value greater than one DPI frame time in byte
+	 * clock(txbyteclkhs) To timeout this timer 1+ of the above said value
+	 * is recommended.
+	 *
+	 * In DBI only mode, value greater than one DBI frame time in byte
+	 * clock(txbyteclkhs) To timeout this timer 1+ of the above said value
+	 * is recommended.
+	 */
+
+	if (is_vid_mode(intel_dsi) &&
+	    intel_dsi->video_mode_format == VIDEO_MODE_BURST) {
+		I915_WRITE(MIPI_HS_TX_TIMEOUT(pipe),
+			   txbyteclkhs(adjusted_mode->htotal, bpp,
+				       intel_dsi->lane_count) + 1);
+	} else {
+		I915_WRITE(MIPI_HS_TX_TIMEOUT(pipe),
+			   txbyteclkhs(adjusted_mode->vtotal *
+				       adjusted_mode->htotal,
+				       bpp, intel_dsi->lane_count) + 1);
+	}
+	I915_WRITE(MIPI_LP_RX_TIMEOUT(pipe), 8309); /* max */
+	I915_WRITE(MIPI_TURN_AROUND_TIMEOUT(pipe), 0x14); /* max */
+	I915_WRITE(MIPI_DEVICE_RESET_TIMER(pipe), 0xffff); /* max */
+
+	/* dphy stuff */
+
+	/* in terms of low power clock */
+	I915_WRITE(MIPI_INIT_COUNT(pipe), txclkesc(ESCAPE_CLOCK_DIVIDER_1, 100));
+
+	/* recovery disables */
+	I915_WRITE(MIPI_EOT_DISABLE(pipe), intel_dsi->eot_disable);
+
+	/* in terms of txbyteclkhs. actual high to low switch +
+	 * MIPI_STOP_STATE_STALL * MIPI_LP_BYTECLK.
+	 *
+	 * XXX: write MIPI_STOP_STATE_STALL?
+	 */
+	I915_WRITE(MIPI_HIGH_LOW_SWITCH_COUNT(pipe), 0x46);
+
+	/* XXX: low power clock equivalence in terms of byte clock. the number
+	 * of byte clocks occupied in one low power clock. based on txbyteclkhs
+	 * and txclkesc. txclkesc time / txbyteclk time * (105 +
+	 * MIPI_STOP_STATE_STALL) / 105.???
+	 */
+	I915_WRITE(MIPI_LP_BYTECLK(pipe), 4);
+
+	/* the bw essential for transmitting 16 long packets containing 252
+	 * bytes meant for dcs write memory command is programmed in this
+	 * register in terms of byte clocks. based on dsi transfer rate and the
+	 * number of lanes configured the time taken to transmit 16 long packets
+	 * in a dsi stream varies. */
+	I915_WRITE(MIPI_DBI_BW_CTRL(pipe), 0x820);
+
+	I915_WRITE(MIPI_CLK_LANE_SWITCH_TIME_CNT(pipe),
+		   0xa << LP_HS_SSW_CNT_SHIFT |
+		   0x14 << HS_LP_PWR_SW_CNT_SHIFT);
+
+	if (is_vid_mode(intel_dsi))
+		I915_WRITE(MIPI_VIDEO_MODE_FORMAT(pipe),
+			   intel_dsi->video_mode_format);
+}
+
+static enum drm_connector_status
+intel_dsi_detect(struct drm_connector *connector, bool force)
+{
+	struct intel_dsi *intel_dsi = intel_attached_dsi(connector);
+	DRM_DEBUG_KMS("\n");
+	return intel_dsi->dev.dev_ops->detect(&intel_dsi->dev);
+}
+
+static int intel_dsi_get_modes(struct drm_connector *connector)
+{
+	struct intel_connector *intel_connector = to_intel_connector(connector);
+	struct drm_display_mode *mode;
+
+	DRM_DEBUG_KMS("\n");
+
+	if (!intel_connector->panel.fixed_mode) {
+		DRM_DEBUG_KMS("no fixed mode\n");
+		return 0;
+	}
+
+	mode = drm_mode_duplicate(connector->dev,
+				  intel_connector->panel.fixed_mode);
+	if (!mode) {
+		DRM_DEBUG_KMS("drm_mode_duplicate failed\n");
+		return 0;
+	}
+
+	drm_mode_probed_add(connector, mode);
+	return 1;
+}
+
+static void intel_dsi_destroy(struct drm_connector *connector)
+{
+	struct intel_connector *intel_connector = to_intel_connector(connector);
+
+	DRM_DEBUG_KMS("\n");
+	intel_panel_fini(&intel_connector->panel);
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+static const struct drm_encoder_funcs intel_dsi_funcs = {
+	.destroy = intel_encoder_destroy,
+};
+
+static const struct drm_connector_helper_funcs intel_dsi_connector_helper_funcs = {
+	.get_modes = intel_dsi_get_modes,
+	.mode_valid = intel_dsi_mode_valid,
+	.best_encoder = intel_best_encoder,
+};
+
+static const struct drm_connector_funcs intel_dsi_connector_funcs = {
+	.dpms = intel_connector_dpms,
+	.detect = intel_dsi_detect,
+	.destroy = intel_dsi_destroy,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+};
+
+bool intel_dsi_init(struct drm_device *dev)
+{
+	struct intel_dsi *intel_dsi;
+	struct intel_encoder *intel_encoder;
+	struct drm_encoder *encoder;
+	struct intel_connector *intel_connector;
+	struct drm_connector *connector;
+	struct drm_display_mode *fixed_mode = NULL;
+	const struct intel_dsi_device *dsi;
+	unsigned int i;
+
+	DRM_DEBUG_KMS("\n");
+
+	intel_dsi = kzalloc(sizeof(*intel_dsi), GFP_KERNEL);
+	if (!intel_dsi)
+		return false;
+
+	intel_connector = kzalloc(sizeof(*intel_connector), GFP_KERNEL);
+	if (!intel_connector) {
+		kfree(intel_dsi);
+		return false;
+	}
+
+	intel_encoder = &intel_dsi->base;
+	encoder = &intel_encoder->base;
+	intel_dsi->attached_connector = intel_connector;
+
+	connector = &intel_connector->base;
+
+	drm_encoder_init(dev, encoder, &intel_dsi_funcs, DRM_MODE_ENCODER_DSI);
+
+	/* XXX: very likely not all of these are needed */
+	intel_encoder->hot_plug = intel_dsi_hot_plug;
+	intel_encoder->compute_config = intel_dsi_compute_config;
+	intel_encoder->pre_pll_enable = intel_dsi_pre_pll_enable;
+	intel_encoder->pre_enable = intel_dsi_pre_enable;
+	intel_encoder->enable = intel_dsi_enable;
+	intel_encoder->mode_set = intel_dsi_mode_set;
+	intel_encoder->disable = intel_dsi_disable;
+	intel_encoder->post_disable = intel_dsi_post_disable;
+	intel_encoder->get_hw_state = intel_dsi_get_hw_state;
+	intel_encoder->get_config = intel_dsi_get_config;
+
+	intel_connector->get_hw_state = intel_connector_get_hw_state;
+
+	for (i = 0; i < ARRAY_SIZE(intel_dsi_devices); i++) {
+		dsi = &intel_dsi_devices[i];
+		intel_dsi->dev = *dsi;
+
+		if (dsi->dev_ops->init(&intel_dsi->dev))
+			break;
+	}
+
+	if (i == ARRAY_SIZE(intel_dsi_devices)) {
+		DRM_DEBUG_KMS("no device found\n");
+		goto err;
+	}
+
+	intel_encoder->type = INTEL_OUTPUT_DSI;
+	intel_encoder->crtc_mask = (1 << 0); /* XXX */
+
+	intel_encoder->cloneable = false;
+	drm_connector_init(dev, connector, &intel_dsi_connector_funcs,
+			   DRM_MODE_CONNECTOR_DSI);
+
+	drm_connector_helper_add(connector, &intel_dsi_connector_helper_funcs);
+
+	connector->display_info.subpixel_order = SubPixelHorizontalRGB; /*XXX*/
+	connector->interlace_allowed = false;
+	connector->doublescan_allowed = false;
+
+	intel_connector_attach_encoder(intel_connector, intel_encoder);
+
+	drm_sysfs_connector_add(connector);
+
+	fixed_mode = dsi->dev_ops->get_modes(&intel_dsi->dev);
+	if (!fixed_mode) {
+		DRM_DEBUG_KMS("no fixed mode\n");
+		goto err;
+	}
+
+	fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
+	intel_panel_init(&intel_connector->panel, fixed_mode);
+
+	return true;
+
+err:
+	drm_encoder_cleanup(&intel_encoder->base);
+	kfree(intel_dsi);
+	kfree(intel_connector);
+
+	return false;
+}