Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 169
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 4de5167e 编写于 作者: R Rafael J. Wysocki
浏览文件
操作

Merge branches 'acpi-init' and 'acpica' 

* acpi-init:
  ACPI / init: Fix the ordering of acpi_reserve_resources()

* acpica:
  Revert "ACPICA: Permanently set _REV to the value '2'."
上级 b9a5e5e1 ff284f37
展开全部 隐藏空白更改
内联 并排
Showing with 2581 addition and 1133 deletion
CREDITS
浏览文件 @ 4de5167e
......@@ -3709,6 +3709,13 @@ N: Dirk Verworner
D: Co-author of German book ``Linux-Kernel-Programmierung''
D: Co-founder of Berlin Linux User Group
N: Andrew Victor
E: linux@maxim.org.za
W: http://maxim.org.za/at91_26.html
D: First maintainer of Atmel ARM-based SoC, aka AT91
D: Introduced support for at91rm9200, the first chip of AT91 family
S: South Africa
N: Riku Voipio
E: riku.voipio@iki.fi
D: Author of PCA9532 LED and Fintek f75375s hwmon driver
......
Documentation/IPMI.txt
浏览文件 @ 4de5167e
......@@ -505,7 +505,10 @@ at module load time (for a module) with:
The addresses are normal I2C addresses. The adapter is the string
name of the adapter, as shown in /sys/class/i2c-adapter/i2c-<n>/name.
It is *NOT* i2c-<n> itself.
It is *NOT* i2c-<n> itself. Also, the comparison is done ignoring
spaces, so if the name is "This is an I2C chip" you can say
adapter_name=ThisisanI2cchip. This is because it's hard to pass in
spaces in kernel parameters.
The debug flags are bit flags for each BMC found, they are:
IPMI messages: 1, driver state: 2, timing: 4, I2C probe: 8
......
Documentation/acpi/enumeration.txt
浏览文件 @ 4de5167e
......@@ -253,7 +253,7 @@ input driver:
GPIO support
~~~~~~~~~~~~
ACPI 5 introduced two new resources to describe GPIO connections: GpioIo
and GpioInt. These resources are used be used to pass GPIO numbers used by
and GpioInt. These resources can be used to pass GPIO numbers used by
the device to the driver. ACPI 5.1 extended this with _DSD (Device
Specific Data) which made it possible to name the GPIOs among other things.
......
Documentation/acpi/gpio-properties.txt
浏览文件 @ 4de5167e
_DSD Device Properties Related to GPIO
--------------------------------------
With the release of ACPI 5.1 and the _DSD configuration objecte names
can finally be given to GPIOs (and other things as well) returned by
_CRS. Previously, we were only able to use an integer index to find
With the release of ACPI 5.1, the _DSD configuration object finally
allows names to be given to GPIOs (and other things as well) returned
by _CRS. Previously, we were only able to use an integer index to find
the corresponding GPIO, which is pretty error prone (it depends on
the _CRS output ordering, for example).
......
Documentation/devicetree/bindings/arm/omap/l3-noc.txt
浏览文件 @ 4de5167e
......@@ -6,6 +6,7 @@ provided by Arteris.
Required properties:
- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
Should be "ti,omap4-l3-noc" for OMAP4 family
Should be "ti,omap5-l3-noc" for OMAP5 family
Should be "ti,dra7-l3-noc" for DRA7 family
Should be "ti,am4372-l3-noc" for AM43 family
- reg: Contains L3 register address range for each noc domain.
......
Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
浏览文件 @ 4de5167e
......@@ -38,7 +38,7 @@ dma_apbx: dma-apbx@80024000 {
80 81 68 69
70 71 72 73
74 75 76 77>;
interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
"saif0", "saif1", "i2c0", "i2c1",
"auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
"auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
......
Documentation/devicetree/bindings/rtc/abracon,abx80x.txt 0 → 100644
浏览文件 @ 4de5167e
Abracon ABX80X I2C ultra low power RTC/Alarm chip
The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
is the superset of ab180x.
Required properties:
- "compatible": should one of:
"abracon,abx80x"
"abracon,ab0801"
"abracon,ab0803"
"abracon,ab0804"
"abracon,ab0805"
"abracon,ab1801"
"abracon,ab1803"
"abracon,ab1804"
"abracon,ab1805"
Using "abracon,abx80x" will enable chip autodetection.
- "reg": I2C bus address of the device
Optional properties:
The abx804 and abx805 have a trickle charger that is able to charge the
connected battery or supercap. Both the following properties have to be defined
and valid to enable charging:
- "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
- "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
resistor, the other values are in ohm.
Documentation/kasan.txt
浏览文件 @ 4de5167e
......@@ -9,7 +9,9 @@ a fast and comprehensive solution for finding use-after-free and out-of-bounds
bugs.
KASan uses compile-time instrumentation for checking every memory access,
therefore you will need a certain version of GCC > 4.9.2
therefore you will need a gcc version of 4.9.2 or later. KASan could detect out
of bounds accesses to stack or global variables, but only if gcc 5.0 or later was
used to built the kernel.
Currently KASan is supported only for x86_64 architecture and requires that the
kernel be built with the SLUB allocator.
......@@ -23,8 +25,8 @@ To enable KASAN configure kernel with:
and choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. Outline/inline
is compiler instrumentation types. The former produces smaller binary the
latter is 1.1 - 2 times faster. Inline instrumentation requires GCC 5.0 or
latter.
latter is 1.1 - 2 times faster. Inline instrumentation requires a gcc version
of 5.0 or later.
Currently KASAN works only with the SLUB memory allocator.
For better bug detection and nicer report, enable CONFIG_STACKTRACE and put
......
MAINTAINERS
浏览文件 @ 4de5167e
......@@ -892,11 +892,10 @@ S: Maintained
F: arch/arm/mach-alpine/
ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES
M: Andrew Victor <linux@maxim.org.za>
M: Nicolas Ferre <nicolas.ferre@atmel.com>
M: Alexandre Belloni <alexandre.belloni@free-electrons.com>
M: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://maxim.org.za/at91_26.html
W: http://www.linux4sam.org
S: Supported
F: arch/arm/mach-at91/
......@@ -990,6 +989,12 @@ F: drivers/clocksource/timer-prima2.c
F: drivers/clocksource/timer-atlas7.c
N: [^a-z]sirf
ARM/CONEXANT DIGICOLOR MACHINE SUPPORT
M: Baruch Siach <baruch@tkos.co.il>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
N: digicolor
ARM/EBSA110 MACHINE SUPPORT
M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
......@@ -1439,9 +1444,10 @@ ARM/SOCFPGA ARCHITECTURE
M: Dinh Nguyen <dinguyen@opensource.altera.com>
S: Maintained
F: arch/arm/mach-socfpga/
F: arch/arm/boot/dts/socfpga*
F: arch/arm/configs/socfpga_defconfig
W: http://www.rocketboards.org
T: git://git.rocketboards.org/linux-socfpga.git
T: git://git.rocketboards.org/linux-socfpga-next.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT
M: Dinh Nguyen <dinguyen@opensource.altera.com>
......@@ -2116,8 +2122,9 @@ S: Supported
F: drivers/net/ethernet/broadcom/bnx2x/
BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
M: Christian Daudt <bcm@fixthebug.org>
M: Florian Fainelli <f.fainelli@gmail.com>
M: Ray Jui <rjui@broadcom.com>
M: Scott Branden <sbranden@broadcom.com>
L: bcm-kernel-feedback-list@broadcom.com
T: git git://github.com/broadcom/mach-bcm
S: Maintained
......@@ -2168,7 +2175,6 @@ S: Maintained
F: drivers/usb/gadget/udc/bcm63xx_udc.*
BROADCOM BCM7XXX ARM ARCHITECTURE
M: Marc Carino <marc.ceeeee@gmail.com>
M: Brian Norris <computersforpeace@gmail.com>
M: Gregory Fong <gregory.0xf0@gmail.com>
M: Florian Fainelli <f.fainelli@gmail.com>
......@@ -5042,17 +5048,19 @@ S: Orphan
F: drivers/video/fbdev/imsttfb.c
INFINIBAND SUBSYSTEM
M: Roland Dreier <roland@kernel.org>
M: Doug Ledford <dledford@redhat.com>
M: Sean Hefty <sean.hefty@intel.com>
M: Hal Rosenstock <hal.rosenstock@gmail.com>
L: linux-rdma@vger.kernel.org
W: http://www.openfabrics.org/
Q: http://patchwork.kernel.org/project/linux-rdma/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git
T: git git://github.com/dledford/linux.git
S: Supported
F: Documentation/infiniband/
F: drivers/infiniband/
F: include/uapi/linux/if_infiniband.h
F: include/uapi/rdma/
F: include/rdma/
INOTIFY
M: John McCutchan <john@johnmccutchan.com>
......@@ -5805,6 +5813,7 @@ F: drivers/scsi/53c700*
LED SUBSYSTEM
M: Bryan Wu <cooloney@gmail.com>
M: Richard Purdie <rpurdie@rpsys.net>
M: Jacek Anaszewski <j.anaszewski@samsung.com>
L: linux-leds@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds.git
S: Maintained
......@@ -11037,6 +11046,7 @@ F: drivers/media/pci/zoran/
ZRAM COMPRESSED RAM BLOCK DEVICE DRVIER
M: Minchan Kim <minchan@kernel.org>
M: Nitin Gupta <ngupta@vflare.org>
R: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/block/zram/
......
Makefile
浏览文件 @ 4de5167e
VERSION = 4
PATCHLEVEL = 1
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc3
NAME = Hurr durr I'ma sheep
# *DOCUMENTATION*
......
arch/arm/boot/dts/am437x-sk-evm.dts
浏览文件 @ 4de5167e
......@@ -49,7 +49,7 @@
pinctrl-0 = <&matrix_keypad_pins>;
debounce-delay-ms = <5>;
col-scan-delay-us = <1500>;
col-scan-delay-us = <5>;
row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */
&gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, pin6 */
......@@ -473,7 +473,7 @@
interrupt-parent = <&gpio0>;
interrupts = <31 0>;
wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
touchscreen-size-x = <480>;
touchscreen-size-y = <272>;
......
arch/arm/boot/dts/am57xx-beagle-x15.dts
浏览文件 @ 4de5167e
......@@ -18,6 +18,7 @@
aliases {
rtc0 = &mcp_rtc;
rtc1 = &tps659038_rtc;
rtc2 = &rtc;
};
memory {
......@@ -83,7 +84,7 @@
gpio_fan: gpio_fan {
/* Based on 5v 500mA AFB02505HHB */
compatible = "gpio-fan";
gpios = <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0>,
<13000 1>;
#cooling-cells = <2>;
......@@ -130,8 +131,8 @@
uart3_pins_default: uart3_pins_default {
pinctrl-single,pins = <
0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */
0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */
0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
>;
};
......@@ -455,7 +456,7 @@
mcp_rtc: rtc@6f {
compatible = "microchip,mcp7941x";
reg = <0x6f>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>; /* IRQ_SYS_1N */
interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>; /* IRQ_SYS_1N */
pinctrl-names = "default";
pinctrl-0 = <&mcp79410_pins_default>;
......@@ -478,7 +479,7 @@
&uart3 {
status = "okay";
interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
<&dra7_pmx_core 0x248>;
<&dra7_pmx_core 0x3f8>;
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins_default>;
......
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
浏览文件 @ 4de5167e
......@@ -105,6 +105,10 @@
};
internal-regs {
rtc@10300 {
/* No crystal connected to the internal RTC */
status = "disabled";
};
serial@12000 {
status = "okay";
};
......
arch/arm/boot/dts/dra7.dtsi
浏览文件 @ 4de5167e
......@@ -911,7 +911,7 @@
ti,clock-cycles = <16>;
reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
<0x4ae06014 0x4>, <0x4a003b20 0x8>,
<0x4ae06014 0x4>, <0x4a003b20 0xc>,
<0x4ae0c158 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
......@@ -944,7 +944,7 @@
ti,clock-cycles = <16>;
reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
<0x4ae06010 0x4>, <0x4a0025cc 0x8>,
<0x4ae06010 0x4>, <0x4a0025cc 0xc>,
<0x4a002470 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
......@@ -977,7 +977,7 @@
ti,clock-cycles = <16>;
reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
<0x4ae06010 0x4>, <0x4a0025e0 0x8>,
<0x4ae06010 0x4>, <0x4a0025e0 0xc>,
<0x4a00246c 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
......@@ -1010,7 +1010,7 @@
ti,clock-cycles = <16>;
reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
<0x4ae06010 0x4>, <0x4a003b08 0x8>,
<0x4ae06010 0x4>, <0x4a003b08 0xc>,
<0x4ae0c154 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
......@@ -1203,7 +1203,7 @@
status = "disabled";
};
rtc@48838000 {
rtc: rtc@48838000 {
compatible = "ti,am3352-rtc";
reg = <0x48838000 0x100>;
interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
......
arch/arm/boot/dts/exynos4412-odroid-common.dtsi
浏览文件 @ 4de5167e
......@@ -9,6 +9,7 @@
#include <dt-bindings/sound/samsung-i2s.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/clock/maxim,max77686.h>
#include "exynos4412.dtsi"
/ {
......@@ -105,6 +106,8 @@
rtc@10070000 {
status = "okay";
clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
clock-names = "rtc", "rtc_src";
};
g2d@10800000 {
......
arch/arm/boot/dts/exynos5250-snow.dts
浏览文件 @ 4de5167e
......@@ -567,6 +567,7 @@
num-slots = <1>;
broken-cd;
cap-sdio-irq;
keep-power-in-suspend;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
......
arch/arm/boot/dts/exynos5420-trip-points.dtsi
浏览文件 @ 4de5167e
......@@ -28,7 +28,7 @@ trips {
type = "active";
};
cpu-crit-0 {
temperature = <1200000>; /* millicelsius */
temperature = <120000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
};
......
arch/arm/boot/dts/exynos5420.dtsi
浏览文件 @ 4de5167e
......@@ -536,6 +536,7 @@
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
power-domains = <&disp_pd>;
};
mipi_phy: video-phy@10040714 {
......
arch/arm/boot/dts/exynos5440-trip-points.dtsi
浏览文件 @ 4de5167e
......@@ -18,7 +18,7 @@ trips {
type = "active";
};
cpu-crit-0 {
temperature = <1050000>; /* millicelsius */
temperature = <105000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
};
......
arch/arm/boot/dts/imx23-olinuxino.dts
浏览文件 @ 4de5167e
......@@ -12,6 +12,7 @@
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "imx23.dtsi"
/ {
......@@ -93,6 +94,7 @@
ahb@80080000 {
usb0: usb@80080000 {
dr_mode = "host";
vbus-supply = <&reg_usb0_vbus>;
status = "okay";
};
......@@ -122,7 +124,7 @@
user {
label = "green";
gpios = <&gpio2 1 1>;
gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
};
};
};
arch/arm/boot/dts/imx25.dtsi
浏览文件 @ 4de5167e
......@@ -428,6 +428,7 @@
pwm4: pwm@53fc8000 {
compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
#pwm-cells = <2>;
reg = <0x53fc8000 0x4000>;
clocks = <&clks 108>, <&clks 52>;
clock-names = "ipg", "per";
......
arch/arm/boot/dts/imx28.dtsi
浏览文件 @ 4de5167e
......@@ -913,7 +913,7 @@
80 81 68 69
70 71 72 73
74 75 76 77>;
interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
"saif0", "saif1", "i2c0", "i2c1",
"auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
"auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
......
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
浏览文件 @ 4de5167e
......@@ -31,6 +31,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 15 0>;
enable-active-high;
};
reg_usb_h1_vbus: regulator@1 {
......@@ -40,6 +41,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 0 0>;
enable-active-high;
};
};
......
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
浏览文件 @ 4de5167e
......@@ -185,7 +185,6 @@
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
pinctrl-assert-gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
status = "okay";
max7310_a: gpio@30 {
......
arch/arm/boot/dts/omap3-n900.dts
浏览文件 @ 4de5167e
......@@ -498,6 +498,8 @@
DRVDD-supply = <&vmmc2>;
IOVDD-supply = <&vio>;
DVDD-supply = <&vio>;
ai3x-micbias-vg = <1>;
};
tlv320aic3x_aux: tlv320aic3x@19 {
......@@ -509,6 +511,8 @@
DRVDD-supply = <&vmmc2>;
IOVDD-supply = <&vio>;
DVDD-supply = <&vio>;
ai3x-micbias-vg = <2>;
};
tsl2563: tsl2563@29 {
......
arch/arm/boot/dts/omap3.dtsi
浏览文件 @ 4de5167e
......@@ -456,6 +456,7 @@
};
mmu_isp: mmu@480bd400 {
#iommu-cells = <0>;
compatible = "ti,omap2-iommu";
reg = <0x480bd400 0x80>;
interrupts = <24>;
......@@ -464,6 +465,7 @@
};
mmu_iva: mmu@5d000000 {
#iommu-cells = <0>;
compatible = "ti,omap2-iommu";
reg = <0x5d000000 0x80>;
interrupts = <28>;
......
arch/arm/boot/dts/omap5.dtsi
浏览文件 @ 4de5167e
......@@ -128,7 +128,7 @@
* hierarchy.
*/
ocp {
compatible = "ti,omap4-l3-noc", "simple-bus";
compatible = "ti,omap5-l3-noc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
......
arch/arm/boot/dts/r8a7791-koelsch.dts
浏览文件 @ 4de5167e
......@@ -545,7 +545,7 @@
compatible = "adi,adv7511w";
reg = <0x39>;
interrupt-parent = <&gpio3>;
interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
......
arch/arm/boot/dts/ste-dbx5x0.dtsi
浏览文件 @ 4de5167e
......@@ -1017,23 +1017,6 @@
status = "disabled";
};
vmmci: regulator-gpio {
compatible = "regulator-gpio";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2900000>;
regulator-name = "mmci-reg";
regulator-type = "voltage";
startup-delay-us = <100>;
enable-active-high;
states = <1800000 0x1
2900000 0x0>;
status = "disabled";
};
mcde@a0350000 {
compatible = "stericsson,mcde";
reg = <0xa0350000 0x1000>, /* MCDE */
......
arch/arm/boot/dts/ste-href.dtsi
浏览文件 @ 4de5167e
......@@ -111,6 +111,21 @@
pinctrl-1 = <&i2c3_sleep_mode>;
};
vmmci: regulator-gpio {
compatible = "regulator-gpio";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2900000>;
regulator-name = "mmci-reg";
regulator-type = "voltage";
startup-delay-us = <100>;
enable-active-high;
states = <1800000 0x1
2900000 0x0>;
};
// External Micro SD slot
sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>;
......
arch/arm/boot/dts/ste-snowball.dts
浏览文件 @ 4de5167e
......@@ -146,8 +146,21 @@
};
vmmci: regulator-gpio {
compatible = "regulator-gpio";
gpios = <&gpio7 4 0x4>;
enable-gpio = <&gpio6 25 0x4>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2900000>;
regulator-name = "mmci-reg";
regulator-type = "voltage";
startup-delay-us = <100>;
enable-active-high;
states = <1800000 0x1
2900000 0x0>;
};
// External Micro SD slot
......
arch/arm/configs/multi_v7_defconfig
浏览文件 @ 4de5167e
......@@ -39,11 +39,14 @@ CONFIG_ARCH_HIP04=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_ARCH_MESON=y
CONFIG_ARCH_MXC=y
CONFIG_SOC_IMX50=y
CONFIG_SOC_IMX51=y
CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
CONFIG_SOC_IMX6SL=y
CONFIG_SOC_IMX6SX=y
CONFIG_SOC_VF610=y
CONFIG_SOC_LS1021A=y
CONFIG_ARCH_OMAP3=y
CONFIG_ARCH_OMAP4=y
CONFIG_SOC_OMAP5=y
......
arch/arm/configs/omap2plus_defconfig
浏览文件 @ 4de5167e
......@@ -393,7 +393,7 @@ CONFIG_TI_EDMA=y
CONFIG_DMA_OMAP=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXTCON=m
CONFIG_EXTCON_GPIO=m
CONFIG_EXTCON_USB_GPIO=m
CONFIG_EXTCON_PALMAS=m
CONFIG_TI_EMIF=m
CONFIG_PWM=y
......
arch/arm/include/asm/dma-iommu.h
浏览文件 @ 4de5167e
......@@ -25,7 +25,7 @@ struct dma_iommu_mapping {
};
struct dma_iommu_mapping *
arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size);
arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size);
void arm_iommu_release_mapping(struct dma_iommu_mapping *mapping);
......
arch/arm/include/asm/xen/page.h
浏览文件 @ 4de5167e
......@@ -110,5 +110,6 @@ static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn)
bool xen_arch_need_swiotlb(struct device *dev,
unsigned long pfn,
unsigned long mfn);
unsigned long xen_get_swiotlb_free_pages(unsigned int order);
#endif /* _ASM_ARM_XEN_PAGE_H */
arch/arm/kernel/perf_event_cpu.c
浏览文件 @ 4de5167e
......@@ -303,12 +303,17 @@ static int probe_current_pmu(struct arm_pmu *pmu)
static int of_pmu_irq_cfg(struct platform_device *pdev)
{
int i;
int i, irq;
int *irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL);
if (!irqs)
return -ENOMEM;
/* Don't bother with PPIs; they're already affine */
irq = platform_get_irq(pdev, 0);
if (irq >= 0 && irq_is_percpu(irq))
return 0;
for (i = 0; i < pdev->num_resources; ++i) {
struct device_node *dn;
int cpu;
......@@ -317,7 +322,7 @@ static int of_pmu_irq_cfg(struct platform_device *pdev)
i);
if (!dn) {
pr_warn("Failed to parse %s/interrupt-affinity[%d]\n",
of_node_full_name(dn), i);
of_node_full_name(pdev->dev.of_node), i);
break;
}
......
arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
浏览文件 @ 4de5167e
/*
* Copyright (C) 2010 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
* Copyright (C) 2010 Pengutronix, Wolfram Sang <kernel@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
......
arch/arm/mach-omap2/prm-regbits-34xx.h
浏览文件 @ 4de5167e
......@@ -112,6 +112,7 @@
#define OMAP3430_VC_CMD_ONLP_SHIFT 16
#define OMAP3430_VC_CMD_RET_SHIFT 8
#define OMAP3430_VC_CMD_OFF_SHIFT 0
#define OMAP3430_SREN_MASK (1 << 4)
#define OMAP3430_HSEN_MASK (1 << 3)
#define OMAP3430_MCODE_MASK (0x7 << 0)
#define OMAP3430_VALID_MASK (1 << 24)
......
arch/arm/mach-omap2/prm-regbits-44xx.h
浏览文件 @ 4de5167e
......@@ -35,6 +35,7 @@
#define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT 1
#define OMAP4430_GLOBAL_WUEN_MASK (1 << 16)
#define OMAP4430_HSMCODE_MASK (0x7 << 0)
#define OMAP4430_SRMODEEN_MASK (1 << 4)
#define OMAP4430_HSMODEEN_MASK (1 << 3)
#define OMAP4430_HSSCLL_SHIFT 24
#define OMAP4430_ICEPICK_RST_SHIFT 9
......
arch/arm/mach-omap2/vc.c
浏览文件 @ 4de5167e
......@@ -316,7 +316,8 @@ static void __init omap3_vc_init_pmic_signaling(struct voltagedomain *voltdm)
* idle. And we can also scale voltages to zero for off-idle.
* Note that no actual voltage scaling during off-idle will
* happen unless the board specific twl4030 PMIC scripts are
* loaded.
* loaded. See also omap_vc_i2c_init for comments regarding
* erratum i531.
*/
val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET);
if (!(val & OMAP3430_PRM_VOLTCTRL_SEL_OFF)) {
......@@ -704,9 +705,16 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm)
return;
}
/*
* Note that for omap3 OMAP3430_SREN_MASK clears SREN to work around
* erratum i531 "Extra Power Consumed When Repeated Start Operation
* Mode Is Enabled on I2C Interface Dedicated for Smart Reflex (I2C4)".
* Otherwise I2C4 eventually leads into about 23mW extra power being
* consumed even during off idle using VMODE.
*/
i2c_high_speed = voltdm->pmic->i2c_high_speed;
if (i2c_high_speed)
voltdm->rmw(vc->common->i2c_cfg_hsen_mask,
voltdm->rmw(vc->common->i2c_cfg_clear_mask,
vc->common->i2c_cfg_hsen_mask,
vc->common->i2c_cfg_reg);
......
arch/arm/mach-omap2/vc.h
浏览文件 @ 4de5167e
......@@ -34,6 +34,7 @@ struct voltagedomain;
* @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register
* @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register
* @i2c_cfg_reg: I2C configuration register offset
* @i2c_cfg_clear_mask: high-speed mode bit clear mask in I2C config register
* @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register
* @i2c_mcode_mask: MCODE field mask for I2C config register
*
......@@ -52,6 +53,7 @@ struct omap_vc_common {
u8 cmd_ret_shift;
u8 cmd_off_shift;
u8 i2c_cfg_reg;
u8 i2c_cfg_clear_mask;
u8 i2c_cfg_hsen_mask;
u8 i2c_mcode_mask;
};
......
arch/arm/mach-omap2/vc3xxx_data.c
浏览文件 @ 4de5167e
......@@ -40,6 +40,7 @@ static struct omap_vc_common omap3_vc_common = {
.cmd_onlp_shift = OMAP3430_VC_CMD_ONLP_SHIFT,
.cmd_ret_shift = OMAP3430_VC_CMD_RET_SHIFT,
.cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT,
.i2c_cfg_clear_mask = OMAP3430_SREN_MASK | OMAP3430_HSEN_MASK,
.i2c_cfg_hsen_mask = OMAP3430_HSEN_MASK,
.i2c_cfg_reg = OMAP3_PRM_VC_I2C_CFG_OFFSET,
.i2c_mcode_mask = OMAP3430_MCODE_MASK,
......
arch/arm/mach-omap2/vc44xx_data.c
浏览文件 @ 4de5167e
......@@ -42,6 +42,7 @@ static const struct omap_vc_common omap4_vc_common = {
.cmd_ret_shift = OMAP4430_RET_SHIFT,
.cmd_off_shift = OMAP4430_OFF_SHIFT,
.i2c_cfg_reg = OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET,
.i2c_cfg_clear_mask = OMAP4430_SRMODEEN_MASK | OMAP4430_HSMODEEN_MASK,
.i2c_cfg_hsen_mask = OMAP4430_HSMODEEN_MASK,
.i2c_mcode_mask = OMAP4430_HSMCODE_MASK,
};
......
arch/arm/mach-pxa/Kconfig
浏览文件 @ 4de5167e
......@@ -691,4 +691,13 @@ config SHARPSL_PM_MAX1111
config PXA310_ULPI
bool
config PXA_SYSTEMS_CPLDS
tristate "Motherboard cplds"
default ARCH_LUBBOCK || MACH_MAINSTONE
help
This driver supports the Lubbock and Mainstone multifunction chip
found on the pxa25x development platform system (Lubbock) and pxa27x
development platform system (Mainstone). This IO board supports the
interrupts handling, ethernet controller, flash chips, etc ...
endif
arch/arm/mach-pxa/Makefile
浏览文件 @ 4de5167e
......@@ -90,4 +90,5 @@ obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o
obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o
obj-$(CONFIG_MACH_ZIPIT2) += z2.o
obj-$(CONFIG_PXA_SYSTEMS_CPLDS) += pxa_cplds_irqs.o
obj-$(CONFIG_TOSA_BT) += tosa-bt.o
arch/arm/mach-pxa/include/mach/lubbock.h
浏览文件 @ 4de5167e
......@@ -37,7 +37,9 @@
#define LUB_GP __LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
/* Board specific IRQs */
#define LUBBOCK_IRQ(x) (IRQ_BOARD_START + (x))
#define LUBBOCK_NR_IRQS IRQ_BOARD_START
#define LUBBOCK_IRQ(x) (LUBBOCK_NR_IRQS + (x))
#define LUBBOCK_SD_IRQ LUBBOCK_IRQ(0)
#define LUBBOCK_SA1111_IRQ LUBBOCK_IRQ(1)
#define LUBBOCK_USB_IRQ LUBBOCK_IRQ(2) /* usb connect */
......@@ -47,8 +49,7 @@
#define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */
#define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6)
#define LUBBOCK_SA1111_IRQ_BASE (IRQ_BOARD_START + 16)
#define LUBBOCK_NR_IRQS (IRQ_BOARD_START + 16 + 55)
#define LUBBOCK_SA1111_IRQ_BASE (LUBBOCK_NR_IRQS + 32)
#ifndef __ASSEMBLY__
extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
......
arch/arm/mach-pxa/include/mach/mainstone.h
浏览文件 @ 4de5167e
......@@ -120,7 +120,9 @@
#define MST_PCMCIA_PWR_VCC_50 0x4 /* voltage VCC = 5.0V */
/* board specific IRQs */
#define MAINSTONE_IRQ(x) (IRQ_BOARD_START + (x))
#define MAINSTONE_NR_IRQS IRQ_BOARD_START
#define MAINSTONE_IRQ(x) (MAINSTONE_NR_IRQS + (x))
#define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0)
#define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1)
#define MAINSTONE_USBC_IRQ MAINSTONE_IRQ(2)
......@@ -136,6 +138,4 @@
#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14)
#define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15)
#define MAINSTONE_NR_IRQS (IRQ_BOARD_START + 16)
#endif
arch/arm/mach-pxa/lubbock.c
浏览文件 @ 4de5167e
......@@ -12,6 +12,7 @@
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/gpio/machine.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
......@@ -123,84 +124,6 @@ void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
}
EXPORT_SYMBOL(lubbock_set_misc_wr);
static unsigned long lubbock_irq_enabled;
static void lubbock_mask_irq(struct irq_data *d)
{
int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
}
static void lubbock_unmask_irq(struct irq_data *d)
{
int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
/* the irq can be acknowledged only if deasserted, so it's done here */
LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
}
static struct irq_chip lubbock_irq_chip = {
.name = "FPGA",
.irq_ack = lubbock_mask_irq,
.irq_mask = lubbock_mask_irq,
.irq_unmask = lubbock_unmask_irq,
};
static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
do {
/* clear our parent irq */
desc->irq_data.chip->irq_ack(&desc->irq_data);
if (likely(pending)) {
irq = LUBBOCK_IRQ(0) + __ffs(pending);
generic_handle_irq(irq);
}
pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
} while (pending);
}
static void __init lubbock_init_irq(void)
{
int irq;
pxa25x_init_irq();
/* setup extra lubbock irqs */
for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
irq_set_chip_and_handler(irq, &lubbock_irq_chip,
handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lubbock_irq_handler);
irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
}
#ifdef CONFIG_PM
static void lubbock_irq_resume(void)
{
LUB_IRQ_MASK_EN = lubbock_irq_enabled;
}
static struct syscore_ops lubbock_irq_syscore_ops = {
.resume = lubbock_irq_resume,
};
static int __init lubbock_irq_device_init(void)
{
if (machine_is_lubbock()) {
register_syscore_ops(&lubbock_irq_syscore_ops);
return 0;
}
return -ENODEV;
}
device_initcall(lubbock_irq_device_init);
#endif
static int lubbock_udc_is_connected(void)
{
return (LUB_MISC_RD & (1 << 9)) == 0;
......@@ -383,11 +306,38 @@ static struct platform_device lubbock_flash_device[2] = {
},
};
static struct resource lubbock_cplds_resources[] = {
[0] = {
.start = LUBBOCK_FPGA_PHYS + 0xc0,
.end = LUBBOCK_FPGA_PHYS + 0xe0 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = PXA_GPIO_TO_IRQ(0),
.end = PXA_GPIO_TO_IRQ(0),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
[2] = {
.start = LUBBOCK_IRQ(0),
.end = LUBBOCK_IRQ(6),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device lubbock_cplds_device = {
.name = "pxa_cplds_irqs",
.id = -1,
.resource = &lubbock_cplds_resources[0],
.num_resources = 3,
};
static struct platform_device *devices[] __initdata = {
&sa1111_device,
&smc91x_device,
&lubbock_flash_device[0],
&lubbock_flash_device[1],
&lubbock_cplds_device,
};
static struct pxafb_mode_info sharp_lm8v31_mode = {
......@@ -648,7 +598,7 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
/* Maintainer: MontaVista Software Inc. */
.map_io = lubbock_map_io,
.nr_irqs = LUBBOCK_NR_IRQS,
.init_irq = lubbock_init_irq,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.init_time = pxa_timer_init,
.init_machine = lubbock_init,
......
arch/arm/mach-pxa/mainstone.c
浏览文件 @ 4de5167e
......@@ -13,6 +13,7 @@
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/gpio/machine.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
......@@ -122,92 +123,6 @@ static unsigned long mainstone_pin_config[] = {
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
};
static unsigned long mainstone_irq_enabled;
static void mainstone_mask_irq(struct irq_data *d)
{
int mainstone_irq = (d->irq - MAINSTONE_IRQ(0));
MST_INTMSKENA = (mainstone_irq_enabled &= ~(1 << mainstone_irq));
}
static void mainstone_unmask_irq(struct irq_data *d)
{
int mainstone_irq = (d->irq - MAINSTONE_IRQ(0));
/* the irq can be acknowledged only if deasserted, so it's done here */
MST_INTSETCLR &= ~(1 << mainstone_irq);
MST_INTMSKENA = (mainstone_irq_enabled |= (1 << mainstone_irq));
}
static struct irq_chip mainstone_irq_chip = {
.name = "FPGA",
.irq_ack = mainstone_mask_irq,
.irq_mask = mainstone_mask_irq,
.irq_unmask = mainstone_unmask_irq,
};
static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned long pending = MST_INTSETCLR & mainstone_irq_enabled;
do {
/* clear useless edge notification */
desc->irq_data.chip->irq_ack(&desc->irq_data);
if (likely(pending)) {
irq = MAINSTONE_IRQ(0) + __ffs(pending);
generic_handle_irq(irq);
}
pending = MST_INTSETCLR & mainstone_irq_enabled;
} while (pending);
}
static void __init mainstone_init_irq(void)
{
int irq;
pxa27x_init_irq();
/* setup extra Mainstone irqs */
for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) {
irq_set_chip_and_handler(irq, &mainstone_irq_chip,
handle_level_irq);
if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14))
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
else
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
set_irq_flags(MAINSTONE_IRQ(8), 0);
set_irq_flags(MAINSTONE_IRQ(12), 0);
MST_INTMSKENA = 0;
MST_INTSETCLR = 0;
irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), mainstone_irq_handler);
irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
}
#ifdef CONFIG_PM
static void mainstone_irq_resume(void)
{
MST_INTMSKENA = mainstone_irq_enabled;
}
static struct syscore_ops mainstone_irq_syscore_ops = {
.resume = mainstone_irq_resume,
};
static int __init mainstone_irq_device_init(void)
{
if (machine_is_mainstone())
register_syscore_ops(&mainstone_irq_syscore_ops);
return 0;
}
device_initcall(mainstone_irq_device_init);
#endif
static struct resource smc91x_resources[] = {
[0] = {
.start = (MST_ETH_PHYS + 0x300),
......@@ -487,11 +402,37 @@ static struct platform_device mst_gpio_keys_device = {
},
};
static struct resource mst_cplds_resources[] = {
[0] = {
.start = MST_FPGA_PHYS + 0xc0,
.end = MST_FPGA_PHYS + 0xe0 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = PXA_GPIO_TO_IRQ(0),
.end = PXA_GPIO_TO_IRQ(0),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
[2] = {
.start = MAINSTONE_IRQ(0),
.end = MAINSTONE_IRQ(15),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mst_cplds_device = {
.name = "pxa_cplds_irqs",
.id = -1,
.resource = &mst_cplds_resources[0],
.num_resources = 3,
};
static struct platform_device *platform_devices[] __initdata = {
&smc91x_device,
&mst_flash_device[0],
&mst_flash_device[1],
&mst_gpio_keys_device,
&mst_cplds_device,
};
static struct pxaohci_platform_data mainstone_ohci_platform_data = {
......@@ -718,7 +659,7 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
.atag_offset = 0x100, /* BLOB boot parameter setting */
.map_io = mainstone_map_io,
.nr_irqs = MAINSTONE_NR_IRQS,
.init_irq = mainstone_init_irq,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.init_time = pxa_timer_init,
.init_machine = mainstone_init,
......
arch/arm/mach-pxa/pxa_cplds_irqs.c 0 → 100644
浏览文件 @ 4de5167e
/*
* Intel Reference Systems cplds
*
* Copyright (C) 2014 Robert Jarzmik
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* Cplds motherboard driver, supporting lubbock and mainstone SoC board.
*/
#include <linux/bitops.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/mfd/core.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#define FPGA_IRQ_MASK_EN 0x0
#define FPGA_IRQ_SET_CLR 0x10
#define CPLDS_NB_IRQ 32
struct cplds {
void __iomem *base;
int irq;
unsigned int irq_mask;
struct gpio_desc *gpio0;
struct irq_domain *irqdomain;
};
static irqreturn_t cplds_irq_handler(int in_irq, void *d)
{
struct cplds *fpga = d;
unsigned long pending;
unsigned int bit;
pending = readl(fpga->base + FPGA_IRQ_SET_CLR) & fpga->irq_mask;
for_each_set_bit(bit, &pending, CPLDS_NB_IRQ)
generic_handle_irq(irq_find_mapping(fpga->irqdomain, bit));
return IRQ_HANDLED;
}
static void cplds_irq_mask_ack(struct irq_data *d)
{
struct cplds *fpga = irq_data_get_irq_chip_data(d);
unsigned int cplds_irq = irqd_to_hwirq(d);
unsigned int set, bit = BIT(cplds_irq);
fpga->irq_mask &= ~bit;
writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
set = readl(fpga->base + FPGA_IRQ_SET_CLR);
writel(set & ~bit, fpga->base + FPGA_IRQ_SET_CLR);
}
static void cplds_irq_unmask(struct irq_data *d)
{
struct cplds *fpga = irq_data_get_irq_chip_data(d);
unsigned int cplds_irq = irqd_to_hwirq(d);
unsigned int bit = BIT(cplds_irq);
fpga->irq_mask |= bit;
writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
}
static struct irq_chip cplds_irq_chip = {
.name = "pxa_cplds",
.irq_mask_ack = cplds_irq_mask_ack,
.irq_unmask = cplds_irq_unmask,
.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
};
static int cplds_irq_domain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hwirq)
{
struct cplds *fpga = d->host_data;
irq_set_chip_and_handler(irq, &cplds_irq_chip, handle_level_irq);
irq_set_chip_data(irq, fpga);
return 0;
}
static const struct irq_domain_ops cplds_irq_domain_ops = {
.xlate = irq_domain_xlate_twocell,
.map = cplds_irq_domain_map,
};
static int cplds_resume(struct platform_device *pdev)
{
struct cplds *fpga = platform_get_drvdata(pdev);
writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
return 0;
}
static int cplds_probe(struct platform_device *pdev)
{
struct resource *res;
struct cplds *fpga;
int ret;
unsigned int base_irq = 0;
unsigned long irqflags = 0;
fpga = devm_kzalloc(&pdev->dev, sizeof(*fpga), GFP_KERNEL);
if (!fpga)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (res) {
fpga->irq = (unsigned int)res->start;
irqflags = res->flags;
}
if (!fpga->irq)
return -ENODEV;
base_irq = platform_get_irq(pdev, 1);
if (base_irq < 0)
base_irq = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
fpga->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(fpga->base))
return PTR_ERR(fpga->base);
platform_set_drvdata(pdev, fpga);
writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
writel(0, fpga->base + FPGA_IRQ_SET_CLR);
ret = devm_request_irq(&pdev->dev, fpga->irq, cplds_irq_handler,
irqflags, dev_name(&pdev->dev), fpga);
if (ret == -ENOSYS)
return -EPROBE_DEFER;
if (ret) {
dev_err(&pdev->dev, "couldn't request main irq%d: %d\n",
fpga->irq, ret);
return ret;
}
irq_set_irq_wake(fpga->irq, 1);
fpga->irqdomain = irq_domain_add_linear(pdev->dev.of_node,
CPLDS_NB_IRQ,
&cplds_irq_domain_ops, fpga);
if (!fpga->irqdomain)
return -ENODEV;
if (base_irq) {
ret = irq_create_strict_mappings(fpga->irqdomain, base_irq, 0,
CPLDS_NB_IRQ);
if (ret) {
dev_err(&pdev->dev, "couldn't create the irq mapping %d..%d\n",
base_irq, base_irq + CPLDS_NB_IRQ);
return ret;
}
}
return 0;
}
static int cplds_remove(struct platform_device *pdev)
{
struct cplds *fpga = platform_get_drvdata(pdev);
irq_set_chip_and_handler(fpga->irq, NULL, NULL);
return 0;
}
static const struct of_device_id cplds_id_table[] = {
{ .compatible = "intel,lubbock-cplds-irqs", },
{ .compatible = "intel,mainstone-cplds-irqs", },
{ }
};
MODULE_DEVICE_TABLE(of, cplds_id_table);
static struct platform_driver cplds_driver = {
.driver = {
.name = "pxa_cplds_irqs",
.of_match_table = of_match_ptr(cplds_id_table),
},
.probe = cplds_probe,
.remove = cplds_remove,
.resume = cplds_resume,
};
module_platform_driver(cplds_driver);
MODULE_DESCRIPTION("PXA Cplds interrupts driver");
MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>");
MODULE_LICENSE("GPL");
arch/arm/mach-rockchip/pm.c
浏览文件 @ 4de5167e
......@@ -44,9 +44,11 @@ static void __iomem *rk3288_bootram_base;
static phys_addr_t rk3288_bootram_phy;
static struct regmap *pmu_regmap;
static struct regmap *grf_regmap;
static struct regmap *sgrf_regmap;
static u32 rk3288_pmu_pwr_mode_con;
static u32 rk3288_grf_soc_con0;
static u32 rk3288_sgrf_soc_con0;
static inline u32 rk3288_l2_config(void)
......@@ -70,11 +72,25 @@ static void rk3288_slp_mode_set(int level)
{
u32 mode_set, mode_set1;
regmap_read(grf_regmap, RK3288_GRF_SOC_CON0, &rk3288_grf_soc_con0);
regmap_read(sgrf_regmap, RK3288_SGRF_SOC_CON0, &rk3288_sgrf_soc_con0);
regmap_read(pmu_regmap, RK3288_PMU_PWRMODE_CON,
&rk3288_pmu_pwr_mode_con);
/*
* We need set this bit GRF_FORCE_JTAG here, for the debug module,
* otherwise, it may become inaccessible after resume.
* This creates a potential security issue, as the sdmmc pins may
* accept jtag data for a short time during resume if no card is
* inserted.
* But this is of course also true for the regular boot, before we
* turn of the jtag/sdmmc autodetect.
*/
regmap_write(grf_regmap, RK3288_GRF_SOC_CON0, GRF_FORCE_JTAG |
GRF_FORCE_JTAG_WRITE);
/*
* SGRF_FAST_BOOT_EN - system to boot from FAST_BOOT_ADDR
* PCLK_WDT_GATE - disable WDT during suspend.
......@@ -83,6 +99,13 @@ static void rk3288_slp_mode_set(int level)
SGRF_PCLK_WDT_GATE | SGRF_FAST_BOOT_EN
| SGRF_PCLK_WDT_GATE_WRITE | SGRF_FAST_BOOT_EN_WRITE);
/*
* The dapswjdp can not auto reset before resume, that cause it may
* access some illegal address during resume. Let's disable it before
* suspend, and the MASKROM will enable it back.
*/
regmap_write(sgrf_regmap, RK3288_SGRF_CPU_CON0, SGRF_DAPDEVICEEN_WRITE);
/* booting address of resuming system is from this register value */
regmap_write(sgrf_regmap, RK3288_SGRF_FAST_BOOT_ADDR,
rk3288_bootram_phy);
......@@ -128,6 +151,9 @@ static void rk3288_slp_mode_set_resume(void)
regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0,
rk3288_sgrf_soc_con0 | SGRF_PCLK_WDT_GATE_WRITE
| SGRF_FAST_BOOT_EN_WRITE);
regmap_write(grf_regmap, RK3288_GRF_SOC_CON0, rk3288_grf_soc_con0 |
GRF_FORCE_JTAG_WRITE);
}
static int rockchip_lpmode_enter(unsigned long arg)
......@@ -186,6 +212,13 @@ static int rk3288_suspend_init(struct device_node *np)
return PTR_ERR(pmu_regmap);
}
grf_regmap = syscon_regmap_lookup_by_compatible(
"rockchip,rk3288-grf");
if (IS_ERR(grf_regmap)) {
pr_err("%s: could not find grf regmap\n", __func__);
return PTR_ERR(pmu_regmap);
}
sram_np = of_find_compatible_node(NULL, NULL,
"rockchip,rk3288-pmu-sram");
if (!sram_np) {
......
arch/arm/mach-rockchip/pm.h
浏览文件 @ 4de5167e
......@@ -48,6 +48,10 @@ static inline void rockchip_suspend_init(void)
#define RK3288_PMU_WAKEUP_RST_CLR_CNT 0x44
#define RK3288_PMU_PWRMODE_CON1 0x90
#define RK3288_GRF_SOC_CON0 0x244
#define GRF_FORCE_JTAG BIT(12)
#define GRF_FORCE_JTAG_WRITE BIT(28)
#define RK3288_SGRF_SOC_CON0 (0x0000)
#define RK3288_SGRF_FAST_BOOT_ADDR (0x0120)
#define SGRF_PCLK_WDT_GATE BIT(6)
......@@ -55,6 +59,10 @@ static inline void rockchip_suspend_init(void)
#define SGRF_FAST_BOOT_EN BIT(8)
#define SGRF_FAST_BOOT_EN_WRITE BIT(24)
#define RK3288_SGRF_CPU_CON0 (0x40)
#define SGRF_DAPDEVICEEN BIT(0)
#define SGRF_DAPDEVICEEN_WRITE BIT(16)
#define RK3288_CRU_MODE_CON 0x50
#define RK3288_CRU_SEL0_CON 0x60
#define RK3288_CRU_SEL1_CON 0x64
......
arch/arm/mach-rockchip/rockchip.c
浏览文件 @ 4de5167e
......@@ -30,11 +30,30 @@
#include "pm.h"
#define RK3288_GRF_SOC_CON0 0x244
#define RK3288_TIMER6_7_PHYS 0xff810000
static void __init rockchip_timer_init(void)
{
if (of_machine_is_compatible("rockchip,rk3288")) {
struct regmap *grf;
void __iomem *reg_base;
/*
* Most/all uboot versions for rk3288 don't enable timer7
* which is needed for the architected timer to work.
* So make sure it is running during early boot.
*/
reg_base = ioremap(RK3288_TIMER6_7_PHYS, SZ_16K);
if (reg_base) {
writel(0, reg_base + 0x30);
writel(0xffffffff, reg_base + 0x20);
writel(0xffffffff, reg_base + 0x24);
writel(1, reg_base + 0x30);
dsb();
iounmap(reg_base);
} else {
pr_err("rockchip: could not map timer7 registers\n");
}
/*
* Disable auto jtag/sdmmc switching that causes issues
......
arch/arm/mm/dma-mapping.c
浏览文件 @ 4de5167e
......@@ -1878,7 +1878,7 @@ struct dma_map_ops iommu_coherent_ops = {
* arm_iommu_attach_device function.
*/
struct dma_iommu_mapping *
arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size)
arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size)
{
unsigned int bits = size >> PAGE_SHIFT;
unsigned int bitmap_size = BITS_TO_LONGS(bits) * sizeof(long);
......@@ -1886,6 +1886,10 @@ arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size)
int extensions = 1;
int err = -ENOMEM;
/* currently only 32-bit DMA address space is supported */
if (size > DMA_BIT_MASK(32) + 1)
return ERR_PTR(-ERANGE);
if (!bitmap_size)
return ERR_PTR(-EINVAL);
......@@ -2057,13 +2061,6 @@ static bool arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size,
if (!iommu)
return false;
/*
* currently arm_iommu_create_mapping() takes a max of size_t
* for size param. So check this limit for now.
*/
if (size > SIZE_MAX)
return false;
mapping = arm_iommu_create_mapping(dev->bus, dma_base, size);
if (IS_ERR(mapping)) {
pr_warn("Failed to create %llu-byte IOMMU mapping for device %s\n",
......
arch/arm/mm/proc-arm1020.S
浏览文件 @ 4de5167e
......@@ -22,8 +22,6 @@
*
* These are the low level assembler for performing cache and TLB
* functions on the arm1020.
*
* CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt
*/
#include <linux/linkage.h>
#include <linux/init.h>
......
arch/arm/mm/proc-arm1020e.S
浏览文件 @ 4de5167e
......@@ -22,8 +22,6 @@
*
* These are the low level assembler for performing cache and TLB
* functions on the arm1020e.
*
* CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt
*/
#include <linux/linkage.h>
#include <linux/init.h>
......
arch/arm/mm/proc-arm925.S
浏览文件 @ 4de5167e
......@@ -441,9 +441,6 @@ ENTRY(cpu_arm925_set_pte_ext)
.type __arm925_setup, #function
__arm925_setup:
mov r0, #0
#if defined(CONFIG_CPU_ICACHE_STREAMING_DISABLE)
orr r0,r0,#1 << 7
#endif
/* Transparent on, D-cache clean & flush mode. See NOTE2 above */
orr r0,r0,#1 << 1 @ transparent mode on
......
arch/arm/mm/proc-feroceon.S
浏览文件 @ 4de5167e
......@@ -602,7 +602,6 @@ __\name\()_proc_info:
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
initfn __feroceon_setup, __\name\()_proc_info
.long __feroceon_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
......
arch/arm/xen/mm.c
浏览文件 @ 4de5167e
......@@ -4,6 +4,7 @@
#include <linux/gfp.h>
#include <linux/highmem.h>
#include <linux/export.h>
#include <linux/memblock.h>
#include <linux/of_address.h>
#include <linux/slab.h>
#include <linux/types.h>
......@@ -21,6 +22,20 @@
#include <asm/xen/hypercall.h>
#include <asm/xen/interface.h>
unsigned long xen_get_swiotlb_free_pages(unsigned int order)
{
struct memblock_region *reg;
gfp_t flags = __GFP_NOWARN;
for_each_memblock(memory, reg) {
if (reg->base < (phys_addr_t)0xffffffff) {
flags |= __GFP_DMA;
break;
}
}
return __get_free_pages(flags, order);
}
enum dma_cache_op {
DMA_UNMAP,
DMA_MAP,
......
arch/m32r/kernel/smp.c
浏览文件 @ 4de5167e
......@@ -45,7 +45,7 @@ static volatile unsigned long flushcache_cpumask = 0;
/*
* For flush_tlb_others()
*/
static volatile cpumask_t flush_cpumask;
static cpumask_t flush_cpumask;
static struct mm_struct *flush_mm;
static struct vm_area_struct *flush_vma;
static volatile unsigned long flush_va;
......@@ -415,7 +415,7 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm,
*/
send_IPI_mask(&cpumask, INVALIDATE_TLB_IPI, 0);
while (!cpumask_empty((cpumask_t*)&flush_cpumask)) {
while (!cpumask_empty(&flush_cpumask)) {
/* nothing. lockup detection does not belong here */
mb();
}
......@@ -468,7 +468,7 @@ void smp_invalidate_interrupt(void)
__flush_tlb_page(va);
}
}
cpumask_clear_cpu(cpu_id, (cpumask_t*)&flush_cpumask);
cpumask_clear_cpu(cpu_id, &flush_cpumask);
}
/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
......
arch/x86/boot/compressed/eboot.c
浏览文件 @ 4de5167e
......@@ -1109,6 +1109,8 @@ struct boot_params *make_boot_params(struct efi_config *c)
if (!cmdline_ptr)
goto fail;
hdr->cmd_line_ptr = (unsigned long)cmdline_ptr;
/* Fill in upper bits of command line address, NOP on 32 bit */
boot_params->ext_cmd_line_ptr = (u64)(unsigned long)cmdline_ptr >> 32;
hdr->ramdisk_image = 0;
hdr->ramdisk_size = 0;
......
arch/x86/include/asm/hypervisor.h
浏览文件 @ 4de5167e
......@@ -50,7 +50,7 @@ extern const struct hypervisor_x86 *x86_hyper;
/* Recognized hypervisors */
extern const struct hypervisor_x86 x86_hyper_vmware;
extern const struct hypervisor_x86 x86_hyper_ms_hyperv;
extern const struct hypervisor_x86 x86_hyper_xen_hvm;
extern const struct hypervisor_x86 x86_hyper_xen;
extern const struct hypervisor_x86 x86_hyper_kvm;
extern void init_hypervisor(struct cpuinfo_x86 *c);
......
arch/x86/include/asm/spinlock.h
浏览文件 @ 4de5167e
......@@ -169,7 +169,7 @@ static inline int arch_spin_is_contended(arch_spinlock_t *lock)
struct __raw_tickets tmp = READ_ONCE(lock->tickets);
tmp.head &= ~TICKET_SLOWPATH_FLAG;
return (tmp.tail - tmp.head) > TICKET_LOCK_INC;
return (__ticket_t)(tmp.tail - tmp.head) > TICKET_LOCK_INC;
}
#define arch_spin_is_contended arch_spin_is_contended
......
arch/x86/include/asm/xen/page.h
浏览文件 @ 4de5167e
......@@ -269,4 +269,9 @@ static inline bool xen_arch_need_swiotlb(struct device *dev,
return false;
}
static inline unsigned long xen_get_swiotlb_free_pages(unsigned int order)
{
return __get_free_pages(__GFP_NOWARN, order);
}
#endif /* _ASM_X86_XEN_PAGE_H */
arch/x86/kernel/cpu/hypervisor.c
浏览文件 @ 4de5167e
......@@ -27,8 +27,8 @@
static const __initconst struct hypervisor_x86 * const hypervisors[] =
{
#ifdef CONFIG_XEN_PVHVM
&x86_hyper_xen_hvm,
#ifdef CONFIG_XEN
&x86_hyper_xen,
#endif
&x86_hyper_vmware,
&x86_hyper_ms_hyperv,
......
arch/x86/kernel/cpu/perf_event_intel.c
浏览文件 @ 4de5167e
......@@ -2533,34 +2533,6 @@ ssize_t intel_event_sysfs_show(char *page, u64 config)
return x86_event_sysfs_show(page, config, event);
}
static __initconst const struct x86_pmu core_pmu = {
.name = "core",
.handle_irq = x86_pmu_handle_irq,
.disable_all = x86_pmu_disable_all,
.enable_all = core_pmu_enable_all,
.enable = core_pmu_enable_event,
.disable = x86_pmu_disable_event,
.hw_config = x86_pmu_hw_config,
.schedule_events = x86_schedule_events,
.eventsel = MSR_ARCH_PERFMON_EVENTSEL0,
.perfctr = MSR_ARCH_PERFMON_PERFCTR0,
.event_map = intel_pmu_event_map,
.max_events = ARRAY_SIZE(intel_perfmon_event_map),
.apic = 1,
/*
* Intel PMCs cannot be accessed sanely above 32 bit width,
* so we install an artificial 1<<31 period regardless of
* the generic event period:
*/
.max_period = (1ULL << 31) - 1,
.get_event_constraints = intel_get_event_constraints,
.put_event_constraints = intel_put_event_constraints,
.event_constraints = intel_core_event_constraints,
.guest_get_msrs = core_guest_get_msrs,
.format_attrs = intel_arch_formats_attr,
.events_sysfs_show = intel_event_sysfs_show,
};
struct intel_shared_regs *allocate_shared_regs(int cpu)
{
struct intel_shared_regs *regs;
......@@ -2743,6 +2715,44 @@ static struct attribute *intel_arch3_formats_attr[] = {
NULL,
};
static __initconst const struct x86_pmu core_pmu = {
.name = "core",
.handle_irq = x86_pmu_handle_irq,
.disable_all = x86_pmu_disable_all,
.enable_all = core_pmu_enable_all,
.enable = core_pmu_enable_event,
.disable = x86_pmu_disable_event,
.hw_config = x86_pmu_hw_config,
.schedule_events = x86_schedule_events,
.eventsel = MSR_ARCH_PERFMON_EVENTSEL0,
.perfctr = MSR_ARCH_PERFMON_PERFCTR0,
.event_map = intel_pmu_event_map,
.max_events = ARRAY_SIZE(intel_perfmon_event_map),
.apic = 1,
/*
* Intel PMCs cannot be accessed sanely above 32-bit width,
* so we install an artificial 1<<31 period regardless of
* the generic event period:
*/
.max_period = (1ULL<<31) - 1,
.get_event_constraints = intel_get_event_constraints,
.put_event_constraints = intel_put_event_constraints,
.event_constraints = intel_core_event_constraints,
.guest_get_msrs = core_guest_get_msrs,
.format_attrs = intel_arch_formats_attr,
.events_sysfs_show = intel_event_sysfs_show,
/*
* Virtual (or funny metal) CPU can define x86_pmu.extra_regs
* together with PMU version 1 and thus be using core_pmu with
* shared_regs. We need following callbacks here to allocate
* it properly.
*/
.cpu_prepare = intel_pmu_cpu_prepare,
.cpu_starting = intel_pmu_cpu_starting,
.cpu_dying = intel_pmu_cpu_dying,
};
static __initconst const struct x86_pmu intel_pmu = {
.name = "Intel",
.handle_irq = intel_pmu_handle_irq,
......
arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c
浏览文件 @ 4de5167e
/* Nehalem/SandBridge/Haswell uncore support */
#include "perf_event_intel_uncore.h"
/* Uncore IMC PCI IDs */
#define PCI_DEVICE_ID_INTEL_SNB_IMC 0x0100
#define PCI_DEVICE_ID_INTEL_IVB_IMC 0x0154
#define PCI_DEVICE_ID_INTEL_IVB_E3_IMC 0x0150
#define PCI_DEVICE_ID_INTEL_HSW_IMC 0x0c00
#define PCI_DEVICE_ID_INTEL_HSW_U_IMC 0x0a04
/* SNB event control */
#define SNB_UNC_CTL_EV_SEL_MASK 0x000000ff
#define SNB_UNC_CTL_UMASK_MASK 0x0000ff00
......@@ -472,6 +479,10 @@ static const struct pci_device_id hsw_uncore_pci_ids[] = {
PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_HSW_IMC),
.driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
},
{ /* IMC */
PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_HSW_U_IMC),
.driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
},
{ /* end: all zeroes */ },
};
......@@ -502,6 +513,7 @@ static const struct imc_uncore_pci_dev desktop_imc_pci_ids[] = {
IMC_DEV(IVB_IMC, &ivb_uncore_pci_driver), /* 3rd Gen Core processor */
IMC_DEV(IVB_E3_IMC, &ivb_uncore_pci_driver), /* Xeon E3-1200 v2/3rd Gen Core processor */
IMC_DEV(HSW_IMC, &hsw_uncore_pci_driver), /* 4th Gen Core Processor */
IMC_DEV(HSW_U_IMC, &hsw_uncore_pci_driver), /* 4th Gen Core ULT Mobile Processor */
{ /* end marker */ }
};
......
arch/x86/kernel/process.c
浏览文件 @ 4de5167e
......@@ -57,7 +57,7 @@ __visible DEFINE_PER_CPU_SHARED_ALIGNED(struct tss_struct, cpu_tss) = {
.io_bitmap = { [0 ... IO_BITMAP_LONGS] = ~0 },
#endif
};
EXPORT_PER_CPU_SYMBOL_GPL(cpu_tss);
EXPORT_PER_CPU_SYMBOL(cpu_tss);
#ifdef CONFIG_X86_64
static DEFINE_PER_CPU(unsigned char, is_idle);
......@@ -156,11 +156,13 @@ void flush_thread(void)
/* FPU state will be reallocated lazily at the first use. */
drop_fpu(tsk);
free_thread_xstate(tsk);
} else if (!used_math()) {
/* kthread execs. TODO: cleanup this horror. */
if (WARN_ON(init_fpu(tsk)))
force_sig(SIGKILL, tsk);
user_fpu_begin();
} else {
if (!tsk_used_math(tsk)) {
/* kthread execs. TODO: cleanup this horror. */
if (WARN_ON(init_fpu(tsk)))
force_sig(SIGKILL, tsk);
user_fpu_begin();
}
restore_init_xstate();
}
}
......
arch/x86/mm/ioremap.c
浏览文件 @ 4de5167e
......@@ -351,18 +351,20 @@ int arch_ioremap_pmd_supported(void)
*/
void *xlate_dev_mem_ptr(phys_addr_t phys)
{
void *addr;
unsigned long start = phys & PAGE_MASK;
unsigned long start = phys & PAGE_MASK;
unsigned long offset = phys & ~PAGE_MASK;
unsigned long vaddr;
/* If page is RAM, we can use __va. Otherwise ioremap and unmap. */
if (page_is_ram(start >> PAGE_SHIFT))
return __va(phys);
addr = (void __force *)ioremap_cache(start, PAGE_SIZE);
if (addr)
addr = (void *)((unsigned long)addr | (phys & ~PAGE_MASK));
vaddr = (unsigned long)ioremap_cache(start, PAGE_SIZE);
/* Only add the offset on success and return NULL if the ioremap() failed: */
if (vaddr)
vaddr += offset;
return addr;
return (void *)vaddr;
}
void unxlate_dev_mem_ptr(phys_addr_t phys, void *addr)
......
arch/x86/pci/acpi.c
浏览文件 @ 4de5167e
......@@ -325,6 +325,26 @@ static void release_pci_root_info(struct pci_host_bridge *bridge)
kfree(info);
}
/*
* An IO port or MMIO resource assigned to a PCI host bridge may be
* consumed by the host bridge itself or available to its child
* bus/devices. The ACPI specification defines a bit (Producer/Consumer)
* to tell whether the resource is consumed by the host bridge itself,
* but firmware hasn't used that bit consistently, so we can't rely on it.
*
* On x86 and IA64 platforms, all IO port and MMIO resources are assumed
* to be available to child bus/devices except one special case:
* IO port [0xCF8-0xCFF] is consumed by the host bridge itself
* to access PCI configuration space.
*
* So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF].
*/
static bool resource_is_pcicfg_ioport(struct resource *res)
{
return (res->flags & IORESOURCE_IO) &&
res->start == 0xCF8 && res->end == 0xCFF;
}
static void probe_pci_root_info(struct pci_root_info *info,
struct acpi_device *device,
int busnum, int domain,
......@@ -346,8 +366,8 @@ static void probe_pci_root_info(struct pci_root_info *info,
"no IO and memory resources present in _CRS\n");
else
resource_list_for_each_entry_safe(entry, tmp, list) {
if ((entry->res->flags & IORESOURCE_WINDOW) == 0 ||
(entry->res->flags & IORESOURCE_DISABLED))
if ((entry->res->flags & IORESOURCE_DISABLED) ||
resource_is_pcicfg_ioport(entry->res))
resource_list_destroy_entry(entry);
else
entry->res->name = info->name;
......
arch/x86/xen/enlighten.c
浏览文件 @ 4de5167e
......@@ -1760,6 +1760,9 @@ static struct notifier_block xen_hvm_cpu_notifier = {
static void __init xen_hvm_guest_init(void)
{
if (xen_pv_domain())
return;
init_hvm_pv_info();
xen_hvm_init_shared_info();
......@@ -1775,6 +1778,7 @@ static void __init xen_hvm_guest_init(void)
xen_hvm_init_time_ops();
xen_hvm_init_mmu_ops();
}
#endif
static bool xen_nopv = false;
static __init int xen_parse_nopv(char *arg)
......@@ -1784,14 +1788,11 @@ static __init int xen_parse_nopv(char *arg)
}
early_param("xen_nopv", xen_parse_nopv);
static uint32_t __init xen_hvm_platform(void)
static uint32_t __init xen_platform(void)
{
if (xen_nopv)
return 0;
if (xen_pv_domain())
return 0;
return xen_cpuid_base();
}
......@@ -1809,11 +1810,19 @@ bool xen_hvm_need_lapic(void)
}
EXPORT_SYMBOL_GPL(xen_hvm_need_lapic);
const struct hypervisor_x86 x86_hyper_xen_hvm __refconst = {
.name = "Xen HVM",
.detect = xen_hvm_platform,
static void xen_set_cpu_features(struct cpuinfo_x86 *c)
{
if (xen_pv_domain())
clear_cpu_bug(c, X86_BUG_SYSRET_SS_ATTRS);
}
const struct hypervisor_x86 x86_hyper_xen = {
.name = "Xen",
.detect = xen_platform,
#ifdef CONFIG_XEN_PVHVM
.init_platform = xen_hvm_guest_init,
#endif
.x2apic_available = xen_x2apic_para_available,
.set_cpu_features = xen_set_cpu_features,
};
EXPORT_SYMBOL(x86_hyper_xen_hvm);
#endif
EXPORT_SYMBOL(x86_hyper_xen);
arch/x86/xen/suspend.c
浏览文件 @ 4de5167e
......@@ -88,7 +88,17 @@ static void xen_vcpu_notify_restore(void *data)
tick_resume_local();
}
static void xen_vcpu_notify_suspend(void *data)
{
tick_suspend_local();
}
void xen_arch_resume(void)
{
on_each_cpu(xen_vcpu_notify_restore, NULL, 1);
}
void xen_arch_suspend(void)
{
on_each_cpu(xen_vcpu_notify_suspend, NULL, 1);
}
block/blk-core.c
浏览文件 @ 4de5167e
......@@ -552,6 +552,8 @@ void blk_cleanup_queue(struct request_queue *q)
q->queue_lock = &q->__queue_lock;
spin_unlock_irq(lock);
bdi_destroy(&q->backing_dev_info);
/* @q is and will stay empty, shutdown and put */
blk_put_queue(q);
}
......
block/blk-mq.c
浏览文件 @ 4de5167e
......@@ -677,8 +677,11 @@ static void blk_mq_rq_timer(unsigned long priv)
data.next = blk_rq_timeout(round_jiffies_up(data.next));
mod_timer(&q->timeout, data.next);
} else {
queue_for_each_hw_ctx(q, hctx, i)
blk_mq_tag_idle(hctx);
queue_for_each_hw_ctx(q, hctx, i) {
/* the hctx may be unmapped, so check it here */
if (blk_mq_hw_queue_mapped(hctx))
blk_mq_tag_idle(hctx);
}
}
}
......@@ -855,6 +858,16 @@ static void __blk_mq_run_hw_queue(struct blk_mq_hw_ctx *hctx)
spin_lock(&hctx->lock);
list_splice(&rq_list, &hctx->dispatch);
spin_unlock(&hctx->lock);
/*
* the queue is expected stopped with BLK_MQ_RQ_QUEUE_BUSY, but
* it's possible the queue is stopped and restarted again
* before this. Queue restart will dispatch requests. And since
* requests in rq_list aren't added into hctx->dispatch yet,
* the requests in rq_list might get lost.
*
* blk_mq_run_hw_queue() already checks the STOPPED bit
**/
blk_mq_run_hw_queue(hctx, true);
}
}
......@@ -1571,22 +1584,6 @@ static int blk_mq_hctx_cpu_offline(struct blk_mq_hw_ctx *hctx, int cpu)
return NOTIFY_OK;
}
static int blk_mq_hctx_cpu_online(struct blk_mq_hw_ctx *hctx, int cpu)
{
struct request_queue *q = hctx->queue;
struct blk_mq_tag_set *set = q->tag_set;
if (set->tags[hctx->queue_num])
return NOTIFY_OK;
set->tags[hctx->queue_num] = blk_mq_init_rq_map(set, hctx->queue_num);
if (!set->tags[hctx->queue_num])
return NOTIFY_STOP;
hctx->tags = set->tags[hctx->queue_num];
return NOTIFY_OK;
}
static int blk_mq_hctx_notify(void *data, unsigned long action,
unsigned int cpu)
{
......@@ -1594,8 +1591,11 @@ static int blk_mq_hctx_notify(void *data, unsigned long action,
if (action == CPU_DEAD || action == CPU_DEAD_FROZEN)
return blk_mq_hctx_cpu_offline(hctx, cpu);
else if (action == CPU_ONLINE || action == CPU_ONLINE_FROZEN)
return blk_mq_hctx_cpu_online(hctx, cpu);
/*
* In case of CPU online, tags may be reallocated
* in blk_mq_map_swqueue() after mapping is updated.
*/
return NOTIFY_OK;
}
......@@ -1775,6 +1775,7 @@ static void blk_mq_map_swqueue(struct request_queue *q)
unsigned int i;
struct blk_mq_hw_ctx *hctx;
struct blk_mq_ctx *ctx;
struct blk_mq_tag_set *set = q->tag_set;
queue_for_each_hw_ctx(q, hctx, i) {
cpumask_clear(hctx->cpumask);
......@@ -1803,16 +1804,20 @@ static void blk_mq_map_swqueue(struct request_queue *q)
* disable it and free the request entries.
*/
if (!hctx->nr_ctx) {
struct blk_mq_tag_set *set = q->tag_set;
if (set->tags[i]) {
blk_mq_free_rq_map(set, set->tags[i], i);
set->tags[i] = NULL;
hctx->tags = NULL;
}
hctx->tags = NULL;
continue;
}
/* unmapped hw queue can be remapped after CPU topo changed */
if (!set->tags[i])
set->tags[i] = blk_mq_init_rq_map(set, i);
hctx->tags = set->tags[i];
WARN_ON(!hctx->tags);
/*
* Set the map size to the number of mapped software queues.
* This is more accurate and more efficient than looping
......@@ -2090,9 +2095,16 @@ static int blk_mq_queue_reinit_notify(struct notifier_block *nb,
*/
list_for_each_entry(q, &all_q_list, all_q_node)
blk_mq_freeze_queue_start(q);
list_for_each_entry(q, &all_q_list, all_q_node)
list_for_each_entry(q, &all_q_list, all_q_node) {
blk_mq_freeze_queue_wait(q);
/*
* timeout handler can't touch hw queue during the
* reinitialization
*/
del_timer_sync(&q->timeout);
}
list_for_each_entry(q, &all_q_list, all_q_node)
blk_mq_queue_reinit(q);
......
block/blk-sysfs.c
浏览文件 @ 4de5167e
......@@ -522,8 +522,6 @@ static void blk_release_queue(struct kobject *kobj)
blk_trace_shutdown(q);
bdi_destroy(&q->backing_dev_info);
ida_simple_remove(&blk_queue_ida, q->id);
call_rcu(&q->rcu_head, blk_free_queue_rcu);
}
......
block/bounce.c
浏览文件 @ 4de5167e
......@@ -221,8 +221,8 @@ static void __blk_queue_bounce(struct request_queue *q, struct bio **bio_orig,
if (page_to_pfn(page) <= queue_bounce_pfn(q) && !force)
continue;
inc_zone_page_state(to->bv_page, NR_BOUNCE);
to->bv_page = mempool_alloc(pool, q->bounce_gfp);
inc_zone_page_state(to->bv_page, NR_BOUNCE);
if (rw == WRITE) {
char *vto, *vfrom;
......
block/elevator.c
浏览文件 @ 4de5167e
......@@ -157,7 +157,7 @@ struct elevator_queue *elevator_alloc(struct request_queue *q,
eq = kzalloc_node(sizeof(*eq), GFP_KERNEL, q->node);
if (unlikely(!eq))
goto err;
return NULL;
eq->type = e;
kobject_init(&eq->kobj, &elv_ktype);
......@@ -165,10 +165,6 @@ struct elevator_queue *elevator_alloc(struct request_queue *q,
hash_init(eq->hash);
return eq;
err:
kfree(eq);
elevator_put(e);
return NULL;
}
EXPORT_SYMBOL(elevator_alloc);
......
drivers/acpi/acpi_pnp.c
浏览文件 @ 4de5167e
......@@ -304,6 +304,8 @@ static const struct acpi_device_id acpi_pnp_device_ids[] = {
{"PNPb006"},
/* cs423x-pnpbios */
{"CSC0100"},
{"CSC0103"},
{"CSC0110"},
{"CSC0000"},
{"GIM0100"}, /* Guillemot Turtlebeach something appears to be cs4232 compatible */
/* es18xx-pnpbios */
......
drivers/acpi/acpica/utglobal.c
浏览文件 @ 4de5167e
......@@ -102,19 +102,12 @@ const struct acpi_predefined_names acpi_gbl_pre_defined_names[] = {
{"_SB_", ACPI_TYPE_DEVICE, NULL},
{"_SI_", ACPI_TYPE_LOCAL_SCOPE, NULL},
{"_TZ_", ACPI_TYPE_DEVICE, NULL},
/*
* March, 2015:
* The _REV object is in the process of being deprecated, because
* other ACPI implementations permanently return 2. Thus, it
* has little or no value. Return 2 for compatibility with
* other ACPI implementations.
*/
{"_REV", ACPI_TYPE_INTEGER, ACPI_CAST_PTR(char, 2)},
{"_REV", ACPI_TYPE_INTEGER, (char *)ACPI_CA_SUPPORT_LEVEL},
{"_OS_", ACPI_TYPE_STRING, ACPI_OS_NAME},
{"_GL_", ACPI_TYPE_MUTEX, ACPI_CAST_PTR(char, 1)},
{"_GL_", ACPI_TYPE_MUTEX, (char *)1},
#if !defined (ACPI_NO_METHOD_EXECUTION) || defined (ACPI_CONSTANT_EVAL_ONLY)
{"_OSI", ACPI_TYPE_METHOD, ACPI_CAST_PTR(char, 1)},
{"_OSI", ACPI_TYPE_METHOD, (char *)1},
#endif
/* Table terminator */
......
drivers/acpi/resource.c
浏览文件 @ 4de5167e
......@@ -573,7 +573,7 @@ EXPORT_SYMBOL_GPL(acpi_dev_get_resources);
* @ares: Input ACPI resource object.
* @types: Valid resource types of IORESOURCE_XXX
*
* This is a hepler function to support acpi_dev_get_resources(), which filters
* This is a helper function to support acpi_dev_get_resources(), which filters
* ACPI resource objects according to resource types.
*/
int acpi_dev_filter_resource_type(struct acpi_resource *ares,
......
drivers/acpi/sbshc.c
浏览文件 @ 4de5167e
......@@ -14,6 +14,7 @@
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/dmi.h>
#include "sbshc.h"
#define PREFIX "ACPI: "
......@@ -87,6 +88,8 @@ enum acpi_smb_offset {
ACPI_SMB_ALARM_DATA = 0x26, /* 2 bytes alarm data */
};
static bool macbook;
static inline int smb_hc_read(struct acpi_smb_hc *hc, u8 address, u8 *data)
{
return ec_read(hc->offset + address, data);
......@@ -132,6 +135,8 @@ static int acpi_smbus_transaction(struct acpi_smb_hc *hc, u8 protocol,
}
mutex_lock(&hc->lock);
if (macbook)
udelay(5);
if (smb_hc_read(hc, ACPI_SMB_PROTOCOL, &temp))
goto end;
if (temp) {
......@@ -257,12 +262,29 @@ extern int acpi_ec_add_query_handler(struct acpi_ec *ec, u8 query_bit,
acpi_handle handle, acpi_ec_query_func func,
void *data);
static int macbook_dmi_match(const struct dmi_system_id *d)
{
pr_debug("Detected MacBook, enabling workaround\n");
macbook = true;
return 0;
}
static struct dmi_system_id acpi_smbus_dmi_table[] = {
{ macbook_dmi_match, "Apple MacBook", {
DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "MacBook") },
},
{ },
};
static int acpi_smbus_hc_add(struct acpi_device *device)
{
int status;
unsigned long long val;
struct acpi_smb_hc *hc;
dmi_check_system(acpi_smbus_dmi_table);
if (!device)
return -EINVAL;
......
drivers/block/loop.c
浏览文件 @ 4de5167e
......@@ -1620,8 +1620,8 @@ static int loop_add(struct loop_device **l, int i)
static void loop_remove(struct loop_device *lo)
{
del_gendisk(lo->lo_disk);
blk_cleanup_queue(lo->lo_queue);
del_gendisk(lo->lo_disk);
blk_mq_free_tag_set(&lo->tag_set);
put_disk(lo->lo_disk);
kfree(lo);
......
drivers/block/nvme-scsi.c
浏览文件 @ 4de5167e
......@@ -944,7 +944,8 @@ static int nvme_trans_ext_inq_page(struct nvme_ns *ns, struct sg_io_hdr *hdr,
static int nvme_trans_bdev_limits_page(struct nvme_ns *ns, struct sg_io_hdr *hdr,
u8 *inq_response, int alloc_len)
{
__be32 max_sectors = cpu_to_be32(queue_max_hw_sectors(ns->queue));
__be32 max_sectors = cpu_to_be32(
nvme_block_nr(ns, queue_max_hw_sectors(ns->queue)));
__be32 max_discard = cpu_to_be32(ns->queue->limits.max_discard_sectors);
__be32 discard_desc_count = cpu_to_be32(0x100);
......
drivers/block/xen-blkback/blkback.c
浏览文件 @ 4de5167e
......@@ -265,17 +265,6 @@ static void put_persistent_gnt(struct xen_blkif *blkif,
atomic_dec(&blkif->persistent_gnt_in_use);
}
static void free_persistent_gnts_unmap_callback(int result,
struct gntab_unmap_queue_data *data)
{
struct completion *c = data->data;
/* BUG_ON used to reproduce existing behaviour,
but is this the best way to deal with this? */
BUG_ON(result);
complete(c);
}
static void free_persistent_gnts(struct xen_blkif *blkif, struct rb_root *root,
unsigned int num)
{
......@@ -285,12 +274,7 @@ static void free_persistent_gnts(struct xen_blkif *blkif, struct rb_root *root,
struct rb_node *n;
int segs_to_unmap = 0;
struct gntab_unmap_queue_data unmap_data;
struct completion unmap_completion;
init_completion(&unmap_completion);
unmap_data.data = &unmap_completion;
unmap_data.done = &free_persistent_gnts_unmap_callback;
unmap_data.pages = pages;
unmap_data.unmap_ops = unmap;
unmap_data.kunmap_ops = NULL;
......@@ -310,8 +294,7 @@ static void free_persistent_gnts(struct xen_blkif *blkif, struct rb_root *root,
!rb_next(&persistent_gnt->node)) {
unmap_data.count = segs_to_unmap;
gnttab_unmap_refs_async(&unmap_data);
wait_for_completion(&unmap_completion);
BUG_ON(gnttab_unmap_refs_sync(&unmap_data));
put_free_pages(blkif, pages, segs_to_unmap);
segs_to_unmap = 0;
......@@ -329,8 +312,13 @@ void xen_blkbk_unmap_purged_grants(struct work_struct *work)
struct gnttab_unmap_grant_ref unmap[BLKIF_MAX_SEGMENTS_PER_REQUEST];
struct page *pages[BLKIF_MAX_SEGMENTS_PER_REQUEST];
struct persistent_gnt *persistent_gnt;
int ret, segs_to_unmap = 0;
int segs_to_unmap = 0;
struct xen_blkif *blkif = container_of(work, typeof(*blkif), persistent_purge_work);
struct gntab_unmap_queue_data unmap_data;
unmap_data.pages = pages;
unmap_data.unmap_ops = unmap;
unmap_data.kunmap_ops = NULL;
while(!list_empty(&blkif->persistent_purge_list)) {
persistent_gnt = list_first_entry(&blkif->persistent_purge_list,
......@@ -346,17 +334,16 @@ void xen_blkbk_unmap_purged_grants(struct work_struct *work)
pages[segs_to_unmap] = persistent_gnt->page;
if (++segs_to_unmap == BLKIF_MAX_SEGMENTS_PER_REQUEST) {
ret = gnttab_unmap_refs(unmap, NULL, pages,
segs_to_unmap);
BUG_ON(ret);
unmap_data.count = segs_to_unmap;
BUG_ON(gnttab_unmap_refs_sync(&unmap_data));
put_free_pages(blkif, pages, segs_to_unmap);
segs_to_unmap = 0;
}
kfree(persistent_gnt);
}
if (segs_to_unmap > 0) {
ret = gnttab_unmap_refs(unmap, NULL, pages, segs_to_unmap);
BUG_ON(ret);
unmap_data.count = segs_to_unmap;
BUG_ON(gnttab_unmap_refs_sync(&unmap_data));
put_free_pages(blkif, pages, segs_to_unmap);
}
}
......
drivers/block/zram/zram_drv.c
浏览文件 @ 4de5167e
......@@ -74,6 +74,27 @@ static inline struct zram *dev_to_zram(struct device *dev)
return (struct zram *)dev_to_disk(dev)->private_data;
}
static ssize_t compact_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t len)
{
unsigned long nr_migrated;
struct zram *zram = dev_to_zram(dev);
struct zram_meta *meta;
down_read(&zram->init_lock);
if (!init_done(zram)) {
up_read(&zram->init_lock);
return -EINVAL;
}
meta = zram->meta;
nr_migrated = zs_compact(meta->mem_pool);
atomic64_add(nr_migrated, &zram->stats.num_migrated);
up_read(&zram->init_lock);
return len;
}
static ssize_t disksize_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
......@@ -1038,6 +1059,7 @@ static const struct block_device_operations zram_devops = {
.owner = THIS_MODULE
};
static DEVICE_ATTR_WO(compact);
static DEVICE_ATTR_RW(disksize);
static DEVICE_ATTR_RO(initstate);
static DEVICE_ATTR_WO(reset);
......@@ -1114,6 +1136,7 @@ static struct attribute *zram_disk_attrs[] = {
&dev_attr_num_writes.attr,
&dev_attr_failed_reads.attr,
&dev_attr_failed_writes.attr,
&dev_attr_compact.attr,
&dev_attr_invalid_io.attr,
&dev_attr_notify_free.attr,
&dev_attr_zero_pages.attr,
......
drivers/bus/arm-cci.c
浏览文件 @ 4de5167e
......@@ -660,7 +660,7 @@ validate_group(struct perf_event *event)
* Initialise the fake PMU. We only need to populate the
* used_mask for the purposes of validation.
*/
.used_mask = CPU_BITS_NONE,
.used_mask = { 0 },
};
if (!validate_event(event->pmu, &fake_pmu, leader))
......
drivers/bus/omap_l3_noc.c
浏览文件 @ 4de5167e
/*
* OMAP L3 Interconnect error handling driver
*
* Copyright (C) 2011-2014 Texas Instruments Incorporated - http://www.ti.com/
* Copyright (C) 2011-2015 Texas Instruments Incorporated - http://www.ti.com/
* Santosh Shilimkar <santosh.shilimkar@ti.com>
* Sricharan <r.sricharan@ti.com>
*
......@@ -233,7 +233,8 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
}
static const struct of_device_id l3_noc_match[] = {
{.compatible = "ti,omap4-l3-noc", .data = &omap_l3_data},
{.compatible = "ti,omap4-l3-noc", .data = &omap4_l3_data},
{.compatible = "ti,omap5-l3-noc", .data = &omap5_l3_data},
{.compatible = "ti,dra7-l3-noc", .data = &dra_l3_data},
{.compatible = "ti,am4372-l3-noc", .data = &am4372_l3_data},
{},
......
drivers/bus/omap_l3_noc.h
浏览文件 @ 4de5167e
/*
* OMAP L3 Interconnect error handling driver header
*
* Copyright (C) 2011-2014 Texas Instruments Incorporated - http://www.ti.com/
* Copyright (C) 2011-2015 Texas Instruments Incorporated - http://www.ti.com/
* Santosh Shilimkar <santosh.shilimkar@ti.com>
* sricharan <r.sricharan@ti.com>
*
......@@ -175,16 +175,14 @@ static struct l3_flagmux_data omap_l3_flagmux_clk2 = {
};
static struct l3_target_data omap_l3_target_data_clk3[] = {
{0x0100, "EMUSS",},
{0x0300, "DEBUG SOURCE",},
{0x0, "HOST CLK3",},
static struct l3_target_data omap4_l3_target_data_clk3[] = {
{0x0100, "DEBUGSS",},
};
static struct l3_flagmux_data omap_l3_flagmux_clk3 = {
static struct l3_flagmux_data omap4_l3_flagmux_clk3 = {
.offset = 0x0200,
.l3_targ = omap_l3_target_data_clk3,
.num_targ_data = ARRAY_SIZE(omap_l3_target_data_clk3),
.l3_targ = omap4_l3_target_data_clk3,
.num_targ_data = ARRAY_SIZE(omap4_l3_target_data_clk3),
};
static struct l3_masters_data omap_l3_masters[] = {
......@@ -215,21 +213,49 @@ static struct l3_masters_data omap_l3_masters[] = {
{ 0x32, "USBHOSTFS"}
};
static struct l3_flagmux_data *omap_l3_flagmux[] = {
static struct l3_flagmux_data *omap4_l3_flagmux[] = {
&omap_l3_flagmux_clk1,
&omap_l3_flagmux_clk2,
&omap_l3_flagmux_clk3,
&omap4_l3_flagmux_clk3,
};
static const struct omap_l3 omap_l3_data = {
.l3_flagmux = omap_l3_flagmux,
.num_modules = ARRAY_SIZE(omap_l3_flagmux),
static const struct omap_l3 omap4_l3_data = {
.l3_flagmux = omap4_l3_flagmux,
.num_modules = ARRAY_SIZE(omap4_l3_flagmux),
.l3_masters = omap_l3_masters,
.num_masters = ARRAY_SIZE(omap_l3_masters),
/* The 6 MSBs of register field used to distinguish initiator */
.mst_addr_mask = 0xFC,
};
/* OMAP5 data */
static struct l3_target_data omap5_l3_target_data_clk3[] = {
{0x0100, "L3INSTR",},
{0x0300, "DEBUGSS",},
{0x0, "HOSTCLK3",},
};
static struct l3_flagmux_data omap5_l3_flagmux_clk3 = {
.offset = 0x0200,
.l3_targ = omap5_l3_target_data_clk3,
.num_targ_data = ARRAY_SIZE(omap5_l3_target_data_clk3),
};
static struct l3_flagmux_data *omap5_l3_flagmux[] = {
&omap_l3_flagmux_clk1,
&omap_l3_flagmux_clk2,
&omap5_l3_flagmux_clk3,
};
static const struct omap_l3 omap5_l3_data = {
.l3_flagmux = omap5_l3_flagmux,
.num_modules = ARRAY_SIZE(omap5_l3_flagmux),
.l3_masters = omap_l3_masters,
.num_masters = ARRAY_SIZE(omap_l3_masters),
/* The 6 MSBs of register field used to distinguish initiator */
.mst_addr_mask = 0x7E0,
};
/* DRA7 data */
static struct l3_target_data dra_l3_target_data_clk1[] = {
{0x2a00, "AES1",},
......@@ -274,7 +300,7 @@ static struct l3_flagmux_data dra_l3_flagmux_clk1 = {
static struct l3_target_data dra_l3_target_data_clk2[] = {
{0x0, "HOST CLK1",},
{0x0, "HOST CLK2",},
{0x800000, "HOST CLK2",},
{0xdead, L3_TARGET_NOT_SUPPORTED,},
{0x3400, "SHA2_2",},
{0x0900, "BB2D",},
......
drivers/char/hw_random/bcm63xx-rng.c
浏览文件 @ 4de5167e
......@@ -57,7 +57,7 @@ static void bcm63xx_rng_cleanup(struct hwrng *rng)
val &= ~RNG_EN;
__raw_writel(val, priv->regs + RNG_CTRL);
clk_didsable_unprepare(prov->clk);
clk_disable_unprepare(priv->clk);
}
static int bcm63xx_rng_data_present(struct hwrng *rng, int wait)
......@@ -97,14 +97,14 @@ static int bcm63xx_rng_probe(struct platform_device *pdev)
priv->rng.name = pdev->name;
priv->rng.init = bcm63xx_rng_init;
priv->rng.cleanup = bcm63xx_rng_cleanup;
prov->rng.data_present = bcm63xx_rng_data_present;
priv->rng.data_present = bcm63xx_rng_data_present;
priv->rng.data_read = bcm63xx_rng_data_read;
priv->clk = devm_clk_get(&pdev->dev, "ipsec");
if (IS_ERR(priv->clk)) {
error = PTR_ERR(priv->clk);
dev_err(&pdev->dev, "no clock for device: %d\n", error);
return error;
ret = PTR_ERR(priv->clk);
dev_err(&pdev->dev, "no clock for device: %d\n", ret);
return ret;
}
if (!devm_request_mem_region(&pdev->dev, r->start,
......@@ -120,11 +120,11 @@ static int bcm63xx_rng_probe(struct platform_device *pdev)
return -ENOMEM;
}
error = devm_hwrng_register(&pdev->dev, &priv->rng);
if (error) {
ret = devm_hwrng_register(&pdev->dev, &priv->rng);
if (ret) {
dev_err(&pdev->dev, "failed to register rng device: %d\n",
error);
return error;
ret);
return ret;
}
dev_info(&pdev->dev, "registered RNG driver\n");
......
drivers/char/ipmi/ipmi_msghandler.c
浏览文件 @ 4de5167e
......@@ -2000,7 +2000,7 @@ static int smi_ipmb_proc_show(struct seq_file *m, void *v)
seq_printf(m, " %x", intf->channels[i].address);
seq_putc(m, '\n');
return seq_has_overflowed(m);
return 0;
}
static int smi_ipmb_proc_open(struct inode *inode, struct file *file)
......@@ -2023,7 +2023,7 @@ static int smi_version_proc_show(struct seq_file *m, void *v)
ipmi_version_major(&intf->bmc->id),
ipmi_version_minor(&intf->bmc->id));
return seq_has_overflowed(m);
return 0;
}
static int smi_version_proc_open(struct inode *inode, struct file *file)
......
drivers/char/ipmi/ipmi_si_intf.c
浏览文件 @ 4de5167e
......@@ -942,8 +942,7 @@ static void sender(void *send_info,
* If we are running to completion, start it and run
* transactions until everything is clear.
*/
smi_info->curr_msg = msg;
smi_info->waiting_msg = NULL;
smi_info->waiting_msg = msg;
/*
* Run to completion means we are single-threaded, no
......@@ -2244,7 +2243,7 @@ static int ipmi_pnp_probe(struct pnp_dev *dev,
acpi_handle handle;
acpi_status status;
unsigned long long tmp;
int rv;
int rv = -EINVAL;
acpi_dev = pnp_acpi_device(dev);
if (!acpi_dev)
......@@ -2262,8 +2261,10 @@ static int ipmi_pnp_probe(struct pnp_dev *dev,
/* _IFT tells us the interface type: KCS, BT, etc */
status = acpi_evaluate_integer(handle, "_IFT", NULL, &tmp);
if (ACPI_FAILURE(status))
if (ACPI_FAILURE(status)) {
dev_err(&dev->dev, "Could not find ACPI IPMI interface type\n");
goto err_free;
}
switch (tmp) {
case 1:
......@@ -2276,6 +2277,7 @@ static int ipmi_pnp_probe(struct pnp_dev *dev,
info->si_type = SI_BT;
break;
case 4: /* SSIF, just ignore */
rv = -ENODEV;
goto err_free;
default:
dev_info(&dev->dev, "unknown IPMI type %lld\n", tmp);
......@@ -2336,7 +2338,7 @@ static int ipmi_pnp_probe(struct pnp_dev *dev,
err_free:
kfree(info);
return -EINVAL;
return rv;
}
static void ipmi_pnp_remove(struct pnp_dev *dev)
......@@ -3080,7 +3082,7 @@ static int smi_type_proc_show(struct seq_file *m, void *v)
seq_printf(m, "%s\n", si_to_str[smi->si_type]);
return seq_has_overflowed(m);
return 0;
}
static int smi_type_proc_open(struct inode *inode, struct file *file)
......@@ -3153,7 +3155,7 @@ static int smi_params_proc_show(struct seq_file *m, void *v)
smi->irq,
smi->slave_addr);
return seq_has_overflowed(m);
return 0;
}
static int smi_params_proc_open(struct inode *inode, struct file *file)
......
drivers/char/ipmi/ipmi_ssif.c
浏览文件 @ 4de5167e
......@@ -31,7 +31,6 @@
* interface into the I2C driver, I believe.
*/
#include <linux/version.h>
#if defined(MODVERSIONS)
#include <linux/modversions.h>
#endif
......@@ -166,6 +165,9 @@ enum ssif_stat_indexes {
/* Number of watchdog pretimeouts. */
SSIF_STAT_watchdog_pretimeouts,
/* Number of alers received. */
SSIF_STAT_alerts,
/* Always add statistics before this value, it must be last. */
SSIF_NUM_STATS
};
......@@ -214,7 +216,16 @@ struct ssif_info {
#define WDT_PRE_TIMEOUT_INT 0x08
unsigned char msg_flags;
u8 global_enables;
bool has_event_buffer;
bool supports_alert;
/*
* Used to tell what we should do with alerts. If we are
* waiting on a response, read the data immediately.
*/
bool got_alert;
bool waiting_alert;
/*
* If set to true, this will request events the next time the
......@@ -478,13 +489,13 @@ static int ipmi_ssif_thread(void *data)
if (ssif_info->i2c_read_write == I2C_SMBUS_WRITE) {
result = i2c_smbus_write_block_data(
ssif_info->client, SSIF_IPMI_REQUEST,
ssif_info->client, ssif_info->i2c_command,
ssif_info->i2c_data[0],
ssif_info->i2c_data + 1);
ssif_info->done_handler(ssif_info, result, NULL, 0);
} else {
result = i2c_smbus_read_block_data(
ssif_info->client, SSIF_IPMI_RESPONSE,
ssif_info->client, ssif_info->i2c_command,
ssif_info->i2c_data);
if (result < 0)
ssif_info->done_handler(ssif_info, result,
......@@ -518,15 +529,12 @@ static int ssif_i2c_send(struct ssif_info *ssif_info,
static void msg_done_handler(struct ssif_info *ssif_info, int result,
unsigned char *data, unsigned int len);
static void retry_timeout(unsigned long data)
static void start_get(struct ssif_info *ssif_info)
{
struct ssif_info *ssif_info = (void *) data;
int rv;
if (ssif_info->stopping)
return;
ssif_info->rtc_us_timer = 0;
ssif_info->multi_pos = 0;
rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ,
SSIF_IPMI_RESPONSE,
......@@ -540,6 +548,46 @@ static void retry_timeout(unsigned long data)
}
}
static void retry_timeout(unsigned long data)
{
struct ssif_info *ssif_info = (void *) data;
unsigned long oflags, *flags;
bool waiting;
if (ssif_info->stopping)
return;
flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
waiting = ssif_info->waiting_alert;
ssif_info->waiting_alert = false;
ipmi_ssif_unlock_cond(ssif_info, flags);
if (waiting)
start_get(ssif_info);
}
static void ssif_alert(struct i2c_client *client, unsigned int data)
{
struct ssif_info *ssif_info = i2c_get_clientdata(client);
unsigned long oflags, *flags;
bool do_get = false;
ssif_inc_stat(ssif_info, alerts);
flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
if (ssif_info->waiting_alert) {
ssif_info->waiting_alert = false;
del_timer(&ssif_info->retry_timer);
do_get = true;
} else if (ssif_info->curr_msg) {
ssif_info->got_alert = true;
}
ipmi_ssif_unlock_cond(ssif_info, flags);
if (do_get)
start_get(ssif_info);
}
static int start_resend(struct ssif_info *ssif_info);
static void msg_done_handler(struct ssif_info *ssif_info, int result,
......@@ -559,9 +607,12 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result,
if (ssif_info->retries_left > 0) {
ssif_inc_stat(ssif_info, receive_retries);
flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
ssif_info->waiting_alert = true;
ssif_info->rtc_us_timer = SSIF_MSG_USEC;
mod_timer(&ssif_info->retry_timer,
jiffies + SSIF_MSG_JIFFIES);
ssif_info->rtc_us_timer = SSIF_MSG_USEC;
ipmi_ssif_unlock_cond(ssif_info, flags);
return;
}
......@@ -581,9 +632,9 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result,
ssif_inc_stat(ssif_info, received_message_parts);
/* Remove the multi-part read marker. */
for (i = 0; i < (len-2); i++)
ssif_info->data[i] = data[i+2];
len -= 2;
for (i = 0; i < len; i++)
ssif_info->data[i] = data[i+2];
ssif_info->multi_len = len;
ssif_info->multi_pos = 1;
......@@ -610,9 +661,9 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result,
goto continue_op;
}
blocknum = data[ssif_info->multi_len];
blocknum = data[0];
if (ssif_info->multi_len+len-1 > IPMI_MAX_MSG_LENGTH) {
if (ssif_info->multi_len + len - 1 > IPMI_MAX_MSG_LENGTH) {
/* Received message too big, abort the operation. */
result = -E2BIG;
if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
......@@ -622,15 +673,15 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result,
}
/* Remove the blocknum from the data. */
for (i = 0; i < (len-1); i++)
ssif_info->data[i+ssif_info->multi_len] = data[i+1];
len--;
for (i = 0; i < len; i++)
ssif_info->data[i + ssif_info->multi_len] = data[i + 1];
ssif_info->multi_len += len;
if (blocknum == 0xff) {
/* End of read */
len = ssif_info->multi_len;
data = ssif_info->data;
} else if ((blocknum+1) != ssif_info->multi_pos) {
} else if (blocknum + 1 != ssif_info->multi_pos) {
/*
* Out of sequence block, just abort. Block
* numbers start at zero for the second block,
......@@ -650,7 +701,7 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result,
if (rv < 0) {
if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
pr_info(PFX
"Error from i2c_non_blocking_op(2)\n");
"Error from ssif_i2c_send\n");
result = -EIO;
} else
......@@ -830,7 +881,11 @@ static void msg_written_handler(struct ssif_info *ssif_info, int result,
}
if (ssif_info->multi_data) {
/* In the middle of a multi-data write. */
/*
* In the middle of a multi-data write. See the comment
* in the SSIF_MULTI_n_PART case in the probe function
* for details on the intricacies of this.
*/
int left;
ssif_inc_stat(ssif_info, sent_messages_parts);
......@@ -864,15 +919,32 @@ static void msg_written_handler(struct ssif_info *ssif_info, int result,
msg_done_handler(ssif_info, -EIO, NULL, 0);
}
} else {
unsigned long oflags, *flags;
bool got_alert;
ssif_inc_stat(ssif_info, sent_messages);
ssif_inc_stat(ssif_info, sent_messages_parts);
/* Wait a jiffie then request the next message */
ssif_info->retries_left = SSIF_RECV_RETRIES;
ssif_info->rtc_us_timer = SSIF_MSG_PART_USEC;
mod_timer(&ssif_info->retry_timer,
jiffies + SSIF_MSG_PART_JIFFIES);
return;
flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
got_alert = ssif_info->got_alert;
if (got_alert) {
ssif_info->got_alert = false;
ssif_info->waiting_alert = false;
}
if (got_alert) {
ipmi_ssif_unlock_cond(ssif_info, flags);
/* The alert already happened, try now. */
retry_timeout((unsigned long) ssif_info);
} else {
/* Wait a jiffie then request the next message */
ssif_info->waiting_alert = true;
ssif_info->retries_left = SSIF_RECV_RETRIES;
ssif_info->rtc_us_timer = SSIF_MSG_PART_USEC;
mod_timer(&ssif_info->retry_timer,
jiffies + SSIF_MSG_PART_JIFFIES);
ipmi_ssif_unlock_cond(ssif_info, flags);
}
}
}
......@@ -881,6 +953,8 @@ static int start_resend(struct ssif_info *ssif_info)
int rv;
int command;
ssif_info->got_alert = false;
if (ssif_info->data_len > 32) {
command = SSIF_IPMI_MULTI_PART_REQUEST_START;
ssif_info->multi_data = ssif_info->data;
......@@ -915,7 +989,7 @@ static int start_send(struct ssif_info *ssif_info,
return -E2BIG;
ssif_info->retries_left = SSIF_SEND_RETRIES;
memcpy(ssif_info->data+1, data, len);
memcpy(ssif_info->data + 1, data, len);
ssif_info->data_len = len;
return start_resend(ssif_info);
}
......@@ -1200,7 +1274,7 @@ static int smi_type_proc_show(struct seq_file *m, void *v)
{
seq_puts(m, "ssif\n");
return seq_has_overflowed(m);
return 0;
}
static int smi_type_proc_open(struct inode *inode, struct file *file)
......@@ -1243,6 +1317,8 @@ static int smi_stats_proc_show(struct seq_file *m, void *v)
ssif_get_stat(ssif_info, events));
seq_printf(m, "watchdog_pretimeouts: %u\n",
ssif_get_stat(ssif_info, watchdog_pretimeouts));
seq_printf(m, "alerts: %u\n",
ssif_get_stat(ssif_info, alerts));
return 0;
}
......@@ -1258,6 +1334,23 @@ static const struct file_operations smi_stats_proc_ops = {
.release = single_release,
};
static int strcmp_nospace(char *s1, char *s2)
{
while (*s1 && *s2) {
while (isspace(*s1))
s1++;
while (isspace(*s2))
s2++;
if (*s1 > *s2)
return 1;
if (*s1 < *s2)
return -1;
s1++;
s2++;
}
return 0;
}
static struct ssif_addr_info *ssif_info_find(unsigned short addr,
char *adapter_name,
bool match_null_name)
......@@ -1272,8 +1365,10 @@ static struct ssif_addr_info *ssif_info_find(unsigned short addr,
/* One is NULL and one is not */
continue;
}
if (strcmp(info->adapter_name, adapter_name))
/* Names to not match */
if (adapter_name &&
strcmp_nospace(info->adapter_name,
adapter_name))
/* Names do not match */
continue;
}
found = info;
......@@ -1306,6 +1401,12 @@ static bool check_acpi(struct ssif_info *ssif_info, struct device *dev)
return false;
}
/*
* Global enables we care about.
*/
#define GLOBAL_ENABLES_MASK (IPMI_BMC_EVT_MSG_BUFF | IPMI_BMC_RCV_MSG_INTR | \
IPMI_BMC_EVT_MSG_INTR)
static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
unsigned char msg[3];
......@@ -1391,13 +1492,33 @@ static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id)
break;
case SSIF_MULTI_2_PART:
if (ssif_info->max_xmit_msg_size > 64)
ssif_info->max_xmit_msg_size = 64;
if (ssif_info->max_xmit_msg_size > 63)
ssif_info->max_xmit_msg_size = 63;
if (ssif_info->max_recv_msg_size > 62)
ssif_info->max_recv_msg_size = 62;
break;
case SSIF_MULTI_n_PART:
/*
* The specification is rather confusing at
* this point, but I think I understand what
* is meant. At least I have a workable
* solution. With multi-part messages, you
* cannot send a message that is a multiple of
* 32-bytes in length, because the start and
* middle messages are 32-bytes and the end
* message must be at least one byte. You
* can't fudge on an extra byte, that would
* screw up things like fru data writes. So
* we limit the length to 63 bytes. That way
* a 32-byte message gets sent as a single
* part. A larger message will be a 32-byte
* start and the next message is always going
* to be 1-31 bytes in length. Not ideal, but
* it should work.
*/
if (ssif_info->max_xmit_msg_size > 63)
ssif_info->max_xmit_msg_size = 63;
break;
default:
......@@ -1407,7 +1528,7 @@ static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id)
} else {
no_support:
/* Assume no multi-part or PEC support */
pr_info(PFX "Error fetching SSIF: %d %d %2.2x, your system probably doesn't support this command so using defaults\n",
pr_info(PFX "Error fetching SSIF: %d %d %2.2x, your system probably doesn't support this command so using defaults\n",
rv, len, resp[2]);
ssif_info->max_xmit_msg_size = 32;
......@@ -1436,6 +1557,8 @@ static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id)
goto found;
}
ssif_info->global_enables = resp[3];
if (resp[3] & IPMI_BMC_EVT_MSG_BUFF) {
ssif_info->has_event_buffer = true;
/* buffer is already enabled, nothing to do. */
......@@ -1444,18 +1567,37 @@ static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id)
msg[0] = IPMI_NETFN_APP_REQUEST << 2;
msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
msg[2] = resp[3] | IPMI_BMC_EVT_MSG_BUFF;
msg[2] = ssif_info->global_enables | IPMI_BMC_EVT_MSG_BUFF;
rv = do_cmd(client, 3, msg, &len, resp);
if (rv || (len < 2)) {
pr_warn(PFX "Error getting global enables: %d %d %2.2x\n",
pr_warn(PFX "Error setting global enables: %d %d %2.2x\n",
rv, len, resp[2]);
rv = 0; /* Not fatal */
goto found;
}
if (resp[2] == 0)
if (resp[2] == 0) {
/* A successful return means the event buffer is supported. */
ssif_info->has_event_buffer = true;
ssif_info->global_enables |= IPMI_BMC_EVT_MSG_BUFF;
}
msg[0] = IPMI_NETFN_APP_REQUEST << 2;
msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
msg[2] = ssif_info->global_enables | IPMI_BMC_RCV_MSG_INTR;
rv = do_cmd(client, 3, msg, &len, resp);
if (rv || (len < 2)) {
pr_warn(PFX "Error setting global enables: %d %d %2.2x\n",
rv, len, resp[2]);
rv = 0; /* Not fatal */
goto found;
}
if (resp[2] == 0) {
/* A successful return means the alert is supported. */
ssif_info->supports_alert = true;
ssif_info->global_enables |= IPMI_BMC_RCV_MSG_INTR;
}
found:
ssif_info->intf_num = atomic_inc_return(&next_intf);
......@@ -1813,6 +1955,7 @@ static struct i2c_driver ssif_i2c_driver = {
},
.probe = ssif_probe,
.remove = ssif_remove,
.alert = ssif_alert,
.id_table = ssif_id,
.detect = ssif_detect
};
......@@ -1832,7 +1975,7 @@ static int init_ipmi_ssif(void)
rv = new_ssif_client(addr[i], adapter_name[i],
dbg[i], slave_addrs[i],
SI_HARDCODED);
if (!rv)
if (rv)
pr_err(PFX
"Couldn't add hardcoded device at addr 0x%x\n",
addr[i]);
......
drivers/firmware/efi/runtime-map.c
浏览文件 @ 4de5167e
......@@ -120,7 +120,8 @@ add_sysfs_runtime_map_entry(struct kobject *kobj, int nr)
entry = kzalloc(sizeof(*entry), GFP_KERNEL);
if (!entry) {
kset_unregister(map_kset);
return entry;
map_kset = NULL;
return ERR_PTR(-ENOMEM);
}
memcpy(&entry->md, efi_runtime_map + nr * efi_memdesc_size,
......@@ -132,6 +133,7 @@ add_sysfs_runtime_map_entry(struct kobject *kobj, int nr)
if (ret) {
kobject_put(&entry->kobj);
kset_unregister(map_kset);
map_kset = NULL;
return ERR_PTR(ret);
}
......@@ -195,8 +197,6 @@ int __init efi_runtime_map_init(struct kobject *efi_kobj)
entry = *(map_entries + j);
kobject_put(&entry->kobj);
}
if (map_kset)
kset_unregister(map_kset);
out:
return ret;
}
drivers/gpio/gpio-omap.c
浏览文件 @ 4de5167e
......@@ -1054,38 +1054,8 @@ static void omap_gpio_mod_init(struct gpio_bank *bank)
dev_err(bank->dev, "Could not get gpio dbck\n");
}
static void
omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start,
unsigned int num)
{
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base,
handle_simple_irq);
if (!gc) {
dev_err(bank->dev, "Memory alloc failed for gc\n");
return;
}
ct = gc->chip_types;
/* NOTE: No ack required, reading IRQ status clears it. */
ct->chip.irq_mask = irq_gc_mask_set_bit;
ct->chip.irq_unmask = irq_gc_mask_clr_bit;
ct->chip.irq_set_type = omap_gpio_irq_type;
if (bank->regs->wkup_en)
ct->chip.irq_set_wake = omap_gpio_wake_enable;
ct->regs.mask = OMAP_MPUIO_GPIO_INT / bank->stride;
irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
IRQ_NOREQUEST | IRQ_NOPROBE, 0);
}
static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
{
int j;
static int gpio;
int irq_base = 0;
int ret;
......@@ -1132,6 +1102,15 @@ static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
}
#endif
/* MPUIO is a bit different, reading IRQ status clears it */
if (bank->is_mpuio) {
irqc->irq_ack = dummy_irq_chip.irq_ack;
irqc->irq_mask = irq_gc_mask_set_bit;
irqc->irq_unmask = irq_gc_mask_clr_bit;
if (!bank->regs->wkup_en)
irqc->irq_set_wake = NULL;
}
ret = gpiochip_irqchip_add(&bank->chip, irqc,
irq_base, omap_gpio_irq_handler,
IRQ_TYPE_NONE);
......@@ -1145,15 +1124,6 @@ static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
gpiochip_set_chained_irqchip(&bank->chip, irqc,
bank->irq, omap_gpio_irq_handler);
for (j = 0; j < bank->width; j++) {
int irq = irq_find_mapping(bank->chip.irqdomain, j);
if (bank->is_mpuio) {
omap_mpuio_alloc_gc(bank, irq, bank->width);
irq_set_chip_and_handler(irq, NULL, NULL);
set_irq_flags(irq, 0);
}
}
return 0;
}
......
drivers/gpio/gpiolib-acpi.c
浏览文件 @ 4de5167e
......@@ -550,7 +550,7 @@ acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
length = min(agpio->pin_table_length, (u16)(pin_index + bits));
for (i = pin_index; i < length; ++i) {
unsigned pin = agpio->pin_table[i];
int pin = agpio->pin_table[i];
struct acpi_gpio_connection *conn;
struct gpio_desc *desc;
bool found;
......
drivers/gpio/gpiolib-sysfs.c
浏览文件 @ 4de5167e
......@@ -551,6 +551,7 @@ static struct class gpio_class = {
*/
int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
{
struct gpio_chip *chip;
unsigned long flags;
int status;
const char *ioname = NULL;
......@@ -568,8 +569,16 @@ int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
return -EINVAL;
}
chip = desc->chip;
mutex_lock(&sysfs_lock);
/* check if chip is being removed */
if (!chip || !chip->exported) {
status = -ENODEV;
goto fail_unlock;
}
spin_lock_irqsave(&gpio_lock, flags);
if (!test_bit(FLAG_REQUESTED, &desc->flags) ||
test_bit(FLAG_EXPORT, &desc->flags)) {
......@@ -783,12 +792,15 @@ void gpiochip_unexport(struct gpio_chip *chip)
{
int status;
struct device *dev;
struct gpio_desc *desc;
unsigned int i;
mutex_lock(&sysfs_lock);
dev = class_find_device(&gpio_class, NULL, chip, match_export);
if (dev) {
put_device(dev);
device_unregister(dev);
/* prevent further gpiod exports */
chip->exported = false;
status = 0;
} else
......@@ -797,6 +809,13 @@ void gpiochip_unexport(struct gpio_chip *chip)
if (status)
chip_dbg(chip, "%s: status %d\n", __func__, status);
/* unregister gpiod class devices owned by sysfs */
for (i = 0; i < chip->ngpio; i++) {
desc = &chip->desc[i];
if (test_and_clear_bit(FLAG_SYSFS, &desc->flags))
gpiod_free(desc);
}
}
static int __init gpiolib_sysfs_init(void)
......
drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
浏览文件 @ 4de5167e
......@@ -430,9 +430,10 @@ static int unregister_process_nocpsch(struct device_queue_manager *dqm,
BUG_ON(!dqm || !qpd);
BUG_ON(!list_empty(&qpd->queues_list));
pr_debug("In func %s\n", __func__);
pr_debug("kfd: In func %s\n", __func__);
pr_debug("qpd->queues_list is %s\n",
list_empty(&qpd->queues_list) ? "empty" : "not empty");
retval = 0;
mutex_lock(&dqm->lock);
......@@ -882,6 +883,8 @@ static int create_queue_cpsch(struct device_queue_manager *dqm, struct queue *q,
return -ENOMEM;
}
init_sdma_vm(dqm, q, qpd);
retval = mqd->init_mqd(mqd, &q->mqd, &q->mqd_mem_obj,
&q->gart_mqd_addr, &q->properties);
if (retval != 0)
......
drivers/gpu/drm/amd/amdkfd/kfd_topology.c
浏览文件 @ 4de5167e
......@@ -728,9 +728,9 @@ static ssize_t node_show(struct kobject *kobj, struct attribute *attr,
sysfs_show_32bit_prop(buffer, "max_engine_clk_fcompute",
dev->gpu->kfd2kgd->get_max_engine_clock_in_mhz(
dev->gpu->kgd));
sysfs_show_64bit_prop(buffer, "local_mem_size",
dev->gpu->kfd2kgd->get_vmem_size(
dev->gpu->kgd));
(unsigned long long int) 0);
sysfs_show_32bit_prop(buffer, "fw_version",
dev->gpu->kfd2kgd->get_fw_version(
......
drivers/gpu/drm/drm_irq.c
浏览文件 @ 4de5167e
......@@ -131,12 +131,11 @@ static void drm_update_vblank_count(struct drm_device *dev, int crtc)
/* Reinitialize corresponding vblank timestamp if high-precision query
* available. Skip this step if query unsupported or failed. Will
* reinitialize delayed at next vblank interrupt in that case.
* reinitialize delayed at next vblank interrupt in that case and
* assign 0 for now, to mark the vblanktimestamp as invalid.
*/
if (rc) {
tslot = atomic_read(&vblank->count) + diff;
vblanktimestamp(dev, crtc, tslot) = t_vblank;
}
tslot = atomic_read(&vblank->count) + diff;
vblanktimestamp(dev, crtc, tslot) = rc ? t_vblank : (struct timeval) {0, 0};
smp_mb__before_atomic();
atomic_add(diff, &vblank->count);
......
drivers/gpu/drm/i915/intel_display.c
浏览文件 @ 4de5167e
......@@ -13635,9 +13635,6 @@ static const struct intel_dmi_quirk intel_dmi_quirks[] = {
};
static struct intel_quirk intel_quirks[] = {
/* HP Mini needs pipe A force quirk (LP: #322104) */
{ 0x27ae, 0x103c, 0x361a, quirk_pipea_force },
/* Toshiba Protege R-205, S-209 needs pipe A force quirk */
{ 0x2592, 0x1179, 0x0001, quirk_pipea_force },
......
drivers/gpu/drm/i915/intel_dp.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/gpu/drm/i915/intel_lvds.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/gpu/drm/radeon/radeon.h
浏览文件 @ 4de5167e
此差异已折叠。
drivers/gpu/drm/radeon/radeon_mn.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/gpu/drm/radeon/radeon_ttm.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/gpu/drm/radeon/radeon_uvd.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/gpu/drm/radeon/radeon_vce.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/gpu/drm/radeon/rv770d.h
浏览文件 @ 4de5167e
此差异已折叠。
drivers/gpu/drm/radeon/uvd_v1_0.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/gpu/drm/radeon/uvd_v2_2.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/gpu/drm/tegra/drm.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/infiniband/core/addr.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/infiniband/core/cm.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/infiniband/core/cm_msgs.h
浏览文件 @ 4de5167e
此差异已折叠。
drivers/infiniband/core/cma.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/infiniband/core/iwpm_msg.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/infiniband/core/iwpm_util.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/infiniband/core/iwpm_util.h
浏览文件 @ 4de5167e
此差异已折叠。
drivers/infiniband/core/umem_odp.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/infiniband/hw/cxgb4/cm.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/infiniband/hw/cxgb4/cq.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/infiniband/hw/cxgb4/mem.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/infiniband/hw/cxgb4/qp.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/infiniband/hw/cxgb4/t4.h
浏览文件 @ 4de5167e
此差异已折叠。
drivers/infiniband/hw/nes/nes.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/infiniband/hw/nes/nes_cm.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/infiniband/hw/qib/qib.h
浏览文件 @ 4de5167e
此差异已折叠。
drivers/irqchip/irq-gic.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/md/dm-crypt.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/md/md.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/mmc/card/block.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/mmc/card/queue.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/mmc/card/queue.h
浏览文件 @ 4de5167e
此差异已折叠。
drivers/mmc/core/core.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/mmc/host/dw_mmc.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/mmc/host/sh_mmcif.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/pinctrl/core.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/pinctrl/core.h
浏览文件 @ 4de5167e
此差异已折叠。
drivers/pinctrl/devicetree.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/rtc/Kconfig
浏览文件 @ 4de5167e
此差异已折叠。
drivers/rtc/Makefile
浏览文件 @ 4de5167e
此差异已折叠。
drivers/rtc/rtc-abx80x.c 0 → 100644
浏览文件 @ 4de5167e
此差异已折叠。
drivers/rtc/rtc-armada38x.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/tty/hvc/hvc_xen.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/vfio/pci/vfio_pci.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/vfio/vfio.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/xen/events/events_2l.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/xen/events/events_base.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/xen/gntdev.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/xen/grant-table.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/xen/manage.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/xen/swiotlb-xen.c
浏览文件 @ 4de5167e
此差异已折叠。
drivers/xen/xenbus/xenbus_probe.c
浏览文件 @ 4de5167e
此差异已折叠。
fs/btrfs/free-space-cache.c
浏览文件 @ 4de5167e
此差异已折叠。
fs/configfs/mount.c
浏览文件 @ 4de5167e
此差异已折叠。
fs/efivarfs/super.c
浏览文件 @ 4de5167e
此差异已折叠。
fs/f2fs/data.c
浏览文件 @ 4de5167e
此差异已折叠。
fs/f2fs/f2fs.h
浏览文件 @ 4de5167e
此差异已折叠。
fs/f2fs/namei.c
浏览文件 @ 4de5167e
此差异已折叠。
fs/f2fs/super.c
浏览文件 @ 4de5167e
此差异已折叠。
fs/namei.c
浏览文件 @ 4de5167e
此差异已折叠。
fs/namespace.c
浏览文件 @ 4de5167e
此差异已折叠。
fs/nilfs2/btree.c
浏览文件 @ 4de5167e
此差异已折叠。
fs/ocfs2/dlm/dlmmaster.c
浏览文件 @ 4de5167e
此差异已折叠。
fs/splice.c
浏览文件 @ 4de5167e
此差异已折叠。
include/linux/blk_types.h
浏览文件 @ 4de5167e
此差异已折叠。
include/linux/compiler-gcc.h
浏览文件 @ 4de5167e
此差异已折叠。
include/linux/compiler-intel.h
浏览文件 @ 4de5167e
此差异已折叠。
include/linux/compiler.h
浏览文件 @ 4de5167e
此差异已折叠。
include/linux/ftrace_event.h
浏览文件 @ 4de5167e
此差异已折叠。
include/linux/irqchip/arm-gic.h
浏览文件 @ 4de5167e
此差异已折叠。
include/linux/nilfs2_fs.h
浏览文件 @ 4de5167e
此差异已折叠。
include/linux/pci_ids.h
浏览文件 @ 4de5167e
此差异已折叠。
include/linux/util_macros.h
浏览文件 @ 4de5167e
此差异已折叠。
include/rdma/ib_addr.h
浏览文件 @ 4de5167e
此差异已折叠。
include/rdma/ib_cm.h
浏览文件 @ 4de5167e
此差异已折叠。
include/rdma/iw_portmap.h
浏览文件 @ 4de5167e
此差异已折叠。
include/uapi/rdma/rdma_netlink.h
浏览文件 @ 4de5167e
此差异已折叠。
include/xen/grant_table.h
浏览文件 @ 4de5167e
此差异已折叠。
include/xen/xen-ops.h
浏览文件 @ 4de5167e
此差异已折叠。
init/do_mounts.c
浏览文件 @ 4de5167e
此差异已折叠。
kernel/irq/dummychip.c
浏览文件 @ 4de5167e
此差异已折叠。
kernel/rcu/tree.c
浏览文件 @ 4de5167e
此差异已折叠。
kernel/time/clockevents.c
浏览文件 @ 4de5167e
此差异已折叠。
kernel/trace/trace_output.c
浏览文件 @ 4de5167e
此差异已折叠。
lib/Kconfig.debug
浏览文件 @ 4de5167e
此差异已折叠。
lib/Kconfig.kasan
浏览文件 @ 4de5167e
此差异已折叠。
lib/find_last_bit.c 已删除 100644 → 0
浏览文件 @ b9a5e5e1
此差异已折叠。
lib/string.c
浏览文件 @ 4de5167e
此差异已折叠。
mm/hwpoison-inject.c
浏览文件 @ 4de5167e
此差异已折叠。
mm/memory-failure.c
浏览文件 @ 4de5167e
此差异已折叠。
mm/page-writeback.c
浏览文件 @ 4de5167e
此差异已折叠。
tools/lib/api/Makefile
浏览文件 @ 4de5167e
此差异已折叠。
tools/lib/traceevent/event-parse.c
浏览文件 @ 4de5167e
此差异已折叠。
tools/perf/bench/futex-requeue.c
浏览文件 @ 4de5167e
此差异已折叠。
tools/perf/bench/numa.c
浏览文件 @ 4de5167e
此差异已折叠。
tools/perf/builtin-kmem.c
浏览文件 @ 4de5167e
此差异已折叠。
tools/perf/builtin-report.c
浏览文件 @ 4de5167e
此差异已折叠。
tools/perf/builtin-top.c
浏览文件 @ 4de5167e
此差异已折叠。
tools/perf/builtin-trace.c
浏览文件 @ 4de5167e
此差异已折叠。
tools/perf/util/probe-event.c
浏览文件 @ 4de5167e
此差异已折叠。
tools/perf/util/probe-finder.c
浏览文件 @ 4de5167e
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或