提交 4dd42b94 编写于 作者: D David S. Miller

Merge branch 'bnxt_en-misc-next'

Michael Chan says:

====================
bnxt_en: Updates for net-next.

Miscellaneous updates include passing DCBX RoCE VLAN priority to firmware,
checking one more new firmware flag before allowing DCBX to run on the host,
adding 100Gbps speed support, adding check to disallow speed settings on
Multi-host NICs, and a minor fix for reporting VF attributes.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
......@@ -4482,9 +4482,15 @@ static int bnxt_hwrm_func_qcfg(struct bnxt *bp)
vf->vlan = le16_to_cpu(resp->vlan) & VLAN_VID_MASK;
}
#endif
if (BNXT_PF(bp) && (le16_to_cpu(resp->flags) &
FUNC_QCFG_RESP_FLAGS_FW_DCBX_AGENT_ENABLED))
bp->flags |= BNXT_FLAG_FW_LLDP_AGENT;
if (BNXT_PF(bp)) {
u16 flags = le16_to_cpu(resp->flags);
if (flags & (FUNC_QCFG_RESP_FLAGS_FW_DCBX_AGENT_ENABLED |
FUNC_QCFG_RESP_FLAGS_FW_LLDP_AGENT_ENABLED))
bp->flags |= BNXT_FLAG_FW_LLDP_AGENT;
if (flags & FUNC_QCFG_RESP_FLAGS_MULTI_HOST)
bp->flags |= BNXT_FLAG_MULTI_HOST;
}
switch (resp->port_partition_type) {
case FUNC_QCFG_RESP_PORT_PARTITION_TYPE_NPAR1_0:
......@@ -5471,7 +5477,8 @@ static void bnxt_report_link(struct bnxt *bp)
if (bp->link_info.link_up) {
const char *duplex;
const char *flow_ctrl;
u16 speed, fec;
u32 speed;
u16 fec;
netif_carrier_on(bp->dev);
if (bp->link_info.duplex == BNXT_LINK_DUPLEX_FULL)
......@@ -5487,7 +5494,7 @@ static void bnxt_report_link(struct bnxt *bp)
else
flow_ctrl = "none";
speed = bnxt_fw_to_ethtool_speed(bp->link_info.link_speed);
netdev_info(bp->dev, "NIC Link is Up, %d Mbps %s duplex, Flow control: %s\n",
netdev_info(bp->dev, "NIC Link is Up, %u Mbps %s duplex, Flow control: %s\n",
speed, duplex, flow_ctrl);
if (bp->flags & BNXT_FLAG_EEE_CAP)
netdev_info(bp->dev, "EEE is %s\n",
......
......@@ -851,6 +851,7 @@ struct bnxt_link_info {
#define BNXT_LINK_SPEED_25GB PORT_PHY_QCFG_RESP_LINK_SPEED_25GB
#define BNXT_LINK_SPEED_40GB PORT_PHY_QCFG_RESP_LINK_SPEED_40GB
#define BNXT_LINK_SPEED_50GB PORT_PHY_QCFG_RESP_LINK_SPEED_50GB
#define BNXT_LINK_SPEED_100GB PORT_PHY_QCFG_RESP_LINK_SPEED_100GB
u16 support_speeds;
u16 auto_link_speeds; /* fw adv setting */
#define BNXT_LINK_SPEED_MSK_100MB PORT_PHY_QCFG_RESP_SUPPORT_SPEEDS_100MB
......@@ -862,6 +863,7 @@ struct bnxt_link_info {
#define BNXT_LINK_SPEED_MSK_25GB PORT_PHY_QCFG_RESP_SUPPORT_SPEEDS_25GB
#define BNXT_LINK_SPEED_MSK_40GB PORT_PHY_QCFG_RESP_SUPPORT_SPEEDS_40GB
#define BNXT_LINK_SPEED_MSK_50GB PORT_PHY_QCFG_RESP_SUPPORT_SPEEDS_50GB
#define BNXT_LINK_SPEED_MSK_100GB PORT_PHY_QCFG_RESP_SUPPORT_SPEEDS_100GB
u16 support_auto_speeds;
u16 lp_auto_link_speeds;
u16 force_link_speed;
......@@ -1003,6 +1005,7 @@ struct bnxt {
#define BNXT_FLAG_NO_AGG_RINGS 0x20000
#define BNXT_FLAG_RX_PAGE_MODE 0x40000
#define BNXT_FLAG_FW_LLDP_AGENT 0x80000
#define BNXT_FLAG_MULTI_HOST 0x100000
#define BNXT_FLAG_CHIP_NITRO_A0 0x1000000
#define BNXT_FLAG_ALL_CONFIG_FEATS (BNXT_FLAG_TPA | \
......@@ -1012,7 +1015,8 @@ struct bnxt {
#define BNXT_PF(bp) (!((bp)->flags & BNXT_FLAG_VF))
#define BNXT_VF(bp) ((bp)->flags & BNXT_FLAG_VF)
#define BNXT_NPAR(bp) ((bp)->port_partition_type)
#define BNXT_SINGLE_PF(bp) (BNXT_PF(bp) && !BNXT_NPAR(bp))
#define BNXT_MH(bp) ((bp)->flags & BNXT_FLAG_MULTI_HOST)
#define BNXT_SINGLE_PF(bp) (BNXT_PF(bp) && !BNXT_NPAR(bp) && !BNXT_MH(bp))
#define BNXT_CHIP_TYPE_NITRO_A0(bp) ((bp)->flags & BNXT_FLAG_CHIP_NITRO_A0)
#define BNXT_RX_PAGE_MODE(bp) ((bp)->flags & BNXT_FLAG_RX_PAGE_MODE)
......
/* Broadcom NetXtreme-C/E network driver.
*
* Copyright (c) 2014-2016 Broadcom Corporation
* Copyright (c) 2016-2017 Broadcom Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -14,6 +15,7 @@
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/etherdevice.h>
#include <rdma/ib_verbs.h>
#include "bnxt_hsi.h"
#include "bnxt.h"
#include "bnxt_dcb.h"
......@@ -241,6 +243,92 @@ static int bnxt_hwrm_queue_pfc_qcfg(struct bnxt *bp, struct ieee_pfc *pfc)
return 0;
}
static int bnxt_hwrm_set_dcbx_app(struct bnxt *bp, struct dcb_app *app,
bool add)
{
struct hwrm_fw_set_structured_data_input set = {0};
struct hwrm_fw_get_structured_data_input get = {0};
struct hwrm_struct_data_dcbx_app *fw_app;
struct hwrm_struct_hdr *data;
dma_addr_t mapping;
size_t data_len;
int rc, n, i;
if (bp->hwrm_spec_code < 0x10601)
return 0;
n = IEEE_8021QAZ_MAX_TCS;
data_len = sizeof(*data) + sizeof(*fw_app) * n;
data = dma_alloc_coherent(&bp->pdev->dev, data_len, &mapping,
GFP_KERNEL);
if (!data)
return -ENOMEM;
memset(data, 0, data_len);
bnxt_hwrm_cmd_hdr_init(bp, &get, HWRM_FW_GET_STRUCTURED_DATA, -1, -1);
get.dest_data_addr = cpu_to_le64(mapping);
get.structure_id = cpu_to_le16(STRUCT_HDR_STRUCT_ID_DCBX_APP);
get.subtype = cpu_to_le16(HWRM_STRUCT_DATA_SUBTYPE_HOST_OPERATIONAL);
get.count = 0;
rc = hwrm_send_message(bp, &get, sizeof(get), HWRM_CMD_TIMEOUT);
if (rc)
goto set_app_exit;
fw_app = (struct hwrm_struct_data_dcbx_app *)(data + 1);
if (data->struct_id != cpu_to_le16(STRUCT_HDR_STRUCT_ID_DCBX_APP)) {
rc = -ENODEV;
goto set_app_exit;
}
n = data->count;
for (i = 0; i < n; i++, fw_app++) {
if (fw_app->protocol_id == cpu_to_be16(app->protocol) &&
fw_app->protocol_selector == app->selector &&
fw_app->priority == app->priority) {
if (add)
goto set_app_exit;
else
break;
}
}
if (add) {
/* append */
n++;
fw_app->protocol_id = cpu_to_be16(app->protocol);
fw_app->protocol_selector = app->selector;
fw_app->priority = app->priority;
fw_app->valid = 1;
} else {
size_t len = 0;
/* not found, nothing to delete */
if (n == i)
goto set_app_exit;
len = (n - 1 - i) * sizeof(*fw_app);
if (len)
memmove(fw_app, fw_app + 1, len);
n--;
memset(fw_app + n, 0, sizeof(*fw_app));
}
data->count = n;
data->len = cpu_to_le16(sizeof(*fw_app) * n);
data->subtype = cpu_to_le16(HWRM_STRUCT_DATA_SUBTYPE_HOST_OPERATIONAL);
bnxt_hwrm_cmd_hdr_init(bp, &set, HWRM_FW_SET_STRUCTURED_DATA, -1, -1);
set.src_data_addr = cpu_to_le64(mapping);
set.data_len = cpu_to_le16(sizeof(*data) + sizeof(*fw_app) * n);
set.hdr_cnt = 1;
rc = hwrm_send_message(bp, &set, sizeof(set), HWRM_CMD_TIMEOUT);
if (rc)
rc = -EIO;
set_app_exit:
dma_free_coherent(&bp->pdev->dev, data_len, data, mapping);
return rc;
}
static int bnxt_ets_validate(struct bnxt *bp, struct ieee_ets *ets, u8 *tc)
{
int total_ets_bw = 0;
......@@ -417,6 +505,15 @@ static int bnxt_dcbnl_ieee_setapp(struct net_device *dev, struct dcb_app *app)
return -EINVAL;
rc = dcb_ieee_setapp(dev, app);
if (rc)
return rc;
if ((app->selector == IEEE_8021QAZ_APP_SEL_ETHERTYPE &&
app->protocol == ETH_P_IBOE) ||
(app->selector == IEEE_8021QAZ_APP_SEL_DGRAM &&
app->protocol == ROCE_V2_UDP_DPORT))
rc = bnxt_hwrm_set_dcbx_app(bp, app, true);
return rc;
}
......@@ -425,10 +522,19 @@ static int bnxt_dcbnl_ieee_delapp(struct net_device *dev, struct dcb_app *app)
struct bnxt *bp = netdev_priv(dev);
int rc;
if (!(bp->dcbx_cap & DCB_CAP_DCBX_VER_IEEE))
if (!(bp->dcbx_cap & DCB_CAP_DCBX_VER_IEEE) ||
!(bp->dcbx_cap & DCB_CAP_DCBX_HOST))
return -EINVAL;
rc = dcb_ieee_delapp(dev, app);
if (rc)
return rc;
if ((app->selector == IEEE_8021QAZ_APP_SEL_ETHERTYPE &&
app->protocol == ETH_P_IBOE) ||
(app->selector == IEEE_8021QAZ_APP_SEL_DGRAM &&
app->protocol == ROCE_V2_UDP_DPORT))
rc = bnxt_hwrm_set_dcbx_app(bp, app, false);
return rc;
}
......
/* Broadcom NetXtreme-C/E network driver.
*
* Copyright (c) 2014-2016 Broadcom Corporation
* Copyright (c) 2016-2017 Broadcom Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......
......@@ -929,6 +929,9 @@ u32 _bnxt_fw_to_ethtool_adv_spds(u16 fw_speeds, u8 fw_pause)
if ((fw_speeds) & BNXT_LINK_SPEED_MSK_50GB) \
ethtool_link_ksettings_add_link_mode(lk_ksettings, name,\
50000baseCR2_Full);\
if ((fw_speeds) & BNXT_LINK_SPEED_MSK_100GB) \
ethtool_link_ksettings_add_link_mode(lk_ksettings, name,\
100000baseCR4_Full);\
if ((fw_pause) & BNXT_LINK_PAUSE_RX) { \
ethtool_link_ksettings_add_link_mode(lk_ksettings, name,\
Pause); \
......@@ -965,6 +968,9 @@ u32 _bnxt_fw_to_ethtool_adv_spds(u16 fw_speeds, u8 fw_pause)
if (ethtool_link_ksettings_test_link_mode(lk_ksettings, name, \
50000baseCR2_Full)) \
(fw_speeds) |= BNXT_LINK_SPEED_MSK_50GB; \
if (ethtool_link_ksettings_test_link_mode(lk_ksettings, name, \
100000baseCR4_Full)) \
(fw_speeds) |= BNXT_LINK_SPEED_MSK_100GB; \
}
static void bnxt_fw_to_ethtool_advertised_spds(struct bnxt_link_info *link_info,
......@@ -1027,6 +1033,8 @@ u32 bnxt_fw_to_ethtool_speed(u16 fw_link_speed)
return SPEED_40000;
case BNXT_LINK_SPEED_50GB:
return SPEED_50000;
case BNXT_LINK_SPEED_100GB:
return SPEED_100000;
default:
return SPEED_UNKNOWN;
}
......@@ -1092,7 +1100,7 @@ static int bnxt_get_link_ksettings(struct net_device *dev,
return 0;
}
static u32 bnxt_get_fw_speed(struct net_device *dev, u16 ethtool_speed)
static u32 bnxt_get_fw_speed(struct net_device *dev, u32 ethtool_speed)
{
struct bnxt *bp = netdev_priv(dev);
struct bnxt_link_info *link_info = &bp->link_info;
......@@ -1132,6 +1140,10 @@ static u32 bnxt_get_fw_speed(struct net_device *dev, u16 ethtool_speed)
if (support_spds & BNXT_LINK_SPEED_MSK_50GB)
fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_50GB;
break;
case SPEED_100000:
if (support_spds & BNXT_LINK_SPEED_MSK_100GB)
fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_100GB;
break;
default:
netdev_err(dev, "unsupported speed!\n");
break;
......
......@@ -138,8 +138,11 @@ int bnxt_get_vf_config(struct net_device *dev, int vf_id,
ivi->max_tx_rate = vf->max_tx_rate;
ivi->min_tx_rate = vf->min_tx_rate;
ivi->vlan = vf->vlan;
ivi->qos = vf->flags & BNXT_VF_QOS;
ivi->spoofchk = vf->flags & BNXT_VF_SPOOFCHK;
if (vf->flags & BNXT_VF_QOS)
ivi->qos = vf->vlan >> VLAN_PRIO_SHIFT;
else
ivi->qos = 0;
ivi->spoofchk = !!(vf->flags & BNXT_VF_SPOOFCHK);
if (!(vf->flags & BNXT_VF_LINK_FORCED))
ivi->linkstate = IFLA_VF_LINK_STATE_AUTO;
else if (vf->flags & BNXT_VF_LINK_UP)
......@@ -304,7 +307,6 @@ static int bnxt_set_vf_attr(struct bnxt *bp, int num_vfs)
for (i = 0; i < num_vfs; i++) {
vf = &bp->pf.vf[i];
memset(vf, 0, sizeof(*vf));
vf->flags = BNXT_VF_QOS | BNXT_VF_LINK_UP;
}
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册