solos: support new FPGA RAM layout

Buffer sizes have been changed to 2048 bytes.
Flash upgrades use a dedicated RAM block.
Add support for daughterboard.
Signed-off-by: NNathan Williams <nathan@traverse.com.au>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

drivers/atm/solos-pci.c

@@ -59,21 +59,29 @@
 #define RX_DMA_ADDR(port)	(0x30 + (4 * (port)))
 
 #define DATA_RAM_SIZE	32768
-#define BUF_SIZE	4096
+#define BUF_SIZE	2048
+#define OLD_BUF_SIZE	4096 /* For FPGA versions <= 2*/
 #define FPGA_PAGE	528 /* FPGA flash page size*/
 #define SOLOS_PAGE	512 /* Solos flash page size*/
 #define FPGA_BLOCK	(FPGA_PAGE * 8) /* FPGA flash block size*/
 #define SOLOS_BLOCK	(SOLOS_PAGE * 8) /* Solos flash block size*/
 
-#define RX_BUF(card, nr) ((card->buffers) + (nr)*BUF_SIZE*2)
-#define TX_BUF(card, nr) ((card->buffers) + (nr)*BUF_SIZE*2 + BUF_SIZE)
+#define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
+#define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
+#define FLASH_BUF ((card->buffers) + 4*(card->buffer_size)*2)
 
 #define RX_DMA_SIZE	2048
 
+#define FPGA_VERSION(a,b) (((a) << 8) + (b))
+#define LEGACY_BUFFERS	2
+#define DMA_SUPPORTED	4
+
 static int reset = 0;
 static int atmdebug = 0;
 static int firmware_upgrade = 0;
 static int fpga_upgrade = 0;
+static int db_firmware_upgrade = 0;
+static int db_fpga_upgrade = 0;
 
 struct pkt_hdr {
 	__le16 size;
@@ -116,6 +124,8 @@ struct solos_card {
 	wait_queue_head_t param_wq;
 	wait_queue_head_t fw_wq;
 	int using_dma;
+	int fpga_version;
+	int buffer_size;
 };
 
 
@@ -136,10 +146,14 @@ MODULE_PARM_DESC(reset, "Reset Solos chips on startup");
 MODULE_PARM_DESC(atmdebug, "Print ATM data");
 MODULE_PARM_DESC(firmware_upgrade, "Initiate Solos firmware upgrade");
 MODULE_PARM_DESC(fpga_upgrade, "Initiate FPGA upgrade");
+MODULE_PARM_DESC(db_firmware_upgrade, "Initiate daughter board Solos firmware upgrade");
+MODULE_PARM_DESC(db_fpga_upgrade, "Initiate daughter board FPGA upgrade");
 module_param(reset, int, 0444);
 module_param(atmdebug, int, 0644);
 module_param(firmware_upgrade, int, 0444);
 module_param(fpga_upgrade, int, 0444);
+module_param(db_firmware_upgrade, int, 0444);
+module_param(db_fpga_upgrade, int, 0444);
 
 static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
 		       struct atm_vcc *vcc);
@@ -517,10 +531,32 @@ static int flash_upgrade(struct solos_card *card, int chip)
 	if (chip == 0) {
 		fw_name = "solos-FPGA.bin";
 		blocksize = FPGA_BLOCK;
-	} else {
+	} 
+	
+	if (chip == 1) {
 		fw_name = "solos-Firmware.bin";
 		blocksize = SOLOS_BLOCK;
 	}
+	
+	if (chip == 2){
+		if (card->fpga_version > LEGACY_BUFFERS){
+			fw_name = "solos-db-FPGA.bin";
+			blocksize = FPGA_BLOCK;
+		} else {
+			dev_info(&card->dev->dev, "FPGA version doesn't support daughter board upgrades\n");
+			return -EPERM;
+		}
+	}
+	
+	if (chip == 3){
+		if (card->fpga_version > LEGACY_BUFFERS){
+			fw_name = "solos-Firmware.bin";
+			blocksize = SOLOS_BLOCK;
+		} else {
+		dev_info(&card->dev->dev, "FPGA version doesn't support daughter board upgrades\n");
+		return -EPERM;
+		}
+	}
 
 	if (request_firmware(&fw, fw_name, &card->dev->dev))
 		return -ENOENT;
@@ -536,8 +572,10 @@ static int flash_upgrade(struct solos_card *card, int chip)
 	data32 = ioread32(card->config_regs + FPGA_MODE); 
 
 	/* Set mode to Chip Erase */
-	dev_info(&card->dev->dev, "Set FPGA Flash mode to %s Chip Erase\n",
-		 chip?"Solos":"FPGA");
+	if(chip == 0 || chip == 2)
+		dev_info(&card->dev->dev, "Set FPGA Flash mode to FPGA Chip Erase\n");
+	if(chip == 1 || chip == 3)
+		dev_info(&card->dev->dev, "Set FPGA Flash mode to Solos Chip Erase\n");
 	iowrite32((chip * 2), card->config_regs + FLASH_MODE);
 
 
@@ -557,7 +595,10 @@ static int flash_upgrade(struct solos_card *card, int chip)
 		/* Copy block to buffer, swapping each 16 bits */
 		for(i = 0; i < blocksize; i += 4) {
 			uint32_t word = swahb32p((uint32_t *)(fw->data + offset + i));
-			iowrite32(word, RX_BUF(card, 3) + i);
+			if(card->fpga_version > LEGACY_BUFFERS)
+				iowrite32(word, FLASH_BUF + i);
+			else
+				iowrite32(word, RX_BUF(card, 3) + i);
 		}
 
 		/* Specify block number and then trigger flash write */
@@ -1094,12 +1135,18 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	fpga_ver = (data32 & 0x0000FFFF);
 	major_ver = ((data32 & 0xFF000000) >> 24);
 	minor_ver = ((data32 & 0x00FF0000) >> 16);
+	card->fpga_version = FPGA_VERSION(major_ver,minor_ver);
+	if (card->fpga_version > LEGACY_BUFFERS)
+		card->buffer_size = BUF_SIZE;
+	else
+		card->buffer_size = OLD_BUF_SIZE;
 	dev_info(&dev->dev, "Solos FPGA Version %d.%02d svn-%d\n",
 		 major_ver, minor_ver, fpga_ver);
 
-	if (0 && fpga_ver > 27)
+	if (card->fpga_version >= DMA_SUPPORTED){
 		card->using_dma = 1;
-	else {
+	} else {
+		card->using_dma = 0;
 		/* Set RX empty flag for all ports */
 		iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
 	}
@@ -1131,6 +1178,12 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	if (firmware_upgrade)
 		flash_upgrade(card, 1);
 
+	if (db_fpga_upgrade)
+		flash_upgrade(card, 2);
+
+	if (db_firmware_upgrade)
+		flash_upgrade(card, 3);
+
 	err = atm_init(card);
 	if (err)
 		goto out_free_irq;