提交 4d927570 编写于 作者: V Vaibhav Hiremath 提交者: Benoit Cousson

ARM: dts: AM33XX: Set pinmux for clkout2 pad used for clock output

xdma_event_intr1.clkout2 pad can be used to source clock
from either 32K OSC or any of the PLL (except MPU) outputs.
On the existing AM335x based boards (EVM, EVM-SK and Bone),
this pad is used to feed the clock to audio codes.

So, this patch configures the pinmux to get clkout2 on the pad.
Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NBenoit Cousson <benoit.cousson@linaro.org>
上级 9f2fbe17
......@@ -26,7 +26,7 @@
am33xx_pinmux: pinmux@44e10800 {
pinctrl-names = "default";
pinctrl-0 = <>;
pinctrl-0 = <&clkout2_pin>;
user_leds_s0: user_leds_s0 {
pinctrl-single,pins = <
......@@ -50,6 +50,12 @@
0x174 0x00 /* uart0_txd.uart0_txd PULLDOWN | MODE0 */
>;
};
clkout2_pin: pinmux_clkout2_pin {
pinctrl-single,pins = <
0x1b4 0x03 /* xdma_event_intr1.clkout2 OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
>;
};
};
ocp {
......
......@@ -26,7 +26,7 @@
am33xx_pinmux: pinmux@44e10800 {
pinctrl-names = "default";
pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>;
pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
matrix_keypad_s0: matrix_keypad_s0 {
pinctrl-single,pins = <
......@@ -65,6 +65,12 @@
0x174 0x00 /* uart0_txd.uart0_txd PULLDOWN | MODE0 */
>;
};
clkout2_pin: pinmux_clkout2_pin {
pinctrl-single,pins = <
0x1b4 0x03 /* xdma_event_intr1.clkout2 OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
>;
};
};
ocp {
......
......@@ -32,7 +32,7 @@
am33xx_pinmux: pinmux@44e10800 {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_s0>;
pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
user_leds_s0: user_leds_s0 {
pinctrl-single,pins = <
......@@ -65,6 +65,12 @@
0x174 0x00 /* uart0_txd.uart0_txd PULLDOWN | MODE0 */
>;
};
clkout2_pin: pinmux_clkout2_pin {
pinctrl-single,pins = <
0x1b4 0x03 /* xdma_event_intr1.clkout2 OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
>;
};
};
ocp {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册