提交 4d50934a 编写于 作者: A Adam Thomson 提交者: Mark Brown

ASoC: da7218: Add da7218 codec driver

This adds support for DA7217 and DA7218 audio codecs.
Signed-off-by: NAdam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
上级 ee4105a5
/*
* da7218.h - DA7218 ASoC Codec Driver Platform Data
*
* Copyright (c) 2015 Dialog Semiconductor
*
* Author: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef _DA7218_PDATA_H
#define _DA7218_PDATA_H
/* Mic Bias */
enum da7218_micbias_voltage {
DA7218_MICBIAS_1_2V = -1,
DA7218_MICBIAS_1_6V,
DA7218_MICBIAS_1_8V,
DA7218_MICBIAS_2_0V,
DA7218_MICBIAS_2_2V,
DA7218_MICBIAS_2_4V,
DA7218_MICBIAS_2_6V,
DA7218_MICBIAS_2_8V,
DA7218_MICBIAS_3_0V,
};
enum da7218_mic_amp_in_sel {
DA7218_MIC_AMP_IN_SEL_DIFF = 0,
DA7218_MIC_AMP_IN_SEL_SE_P,
DA7218_MIC_AMP_IN_SEL_SE_N,
};
/* DMIC */
enum da7218_dmic_data_sel {
DA7218_DMIC_DATA_LRISE_RFALL = 0,
DA7218_DMIC_DATA_LFALL_RRISE,
};
enum da7218_dmic_samplephase {
DA7218_DMIC_SAMPLE_ON_CLKEDGE = 0,
DA7218_DMIC_SAMPLE_BETWEEN_CLKEDGE,
};
enum da7218_dmic_clk_rate {
DA7218_DMIC_CLK_3_0MHZ = 0,
DA7218_DMIC_CLK_1_5MHZ,
};
/* Headphone Detect */
enum da7218_hpldet_jack_rate {
DA7218_HPLDET_JACK_RATE_5US = 0,
DA7218_HPLDET_JACK_RATE_10US,
DA7218_HPLDET_JACK_RATE_20US,
DA7218_HPLDET_JACK_RATE_40US,
DA7218_HPLDET_JACK_RATE_80US,
DA7218_HPLDET_JACK_RATE_160US,
DA7218_HPLDET_JACK_RATE_320US,
DA7218_HPLDET_JACK_RATE_640US,
};
enum da7218_hpldet_jack_debounce {
DA7218_HPLDET_JACK_DEBOUNCE_OFF = 0,
DA7218_HPLDET_JACK_DEBOUNCE_2,
DA7218_HPLDET_JACK_DEBOUNCE_3,
DA7218_HPLDET_JACK_DEBOUNCE_4,
};
enum da7218_hpldet_jack_thr {
DA7218_HPLDET_JACK_THR_84PCT = 0,
DA7218_HPLDET_JACK_THR_88PCT,
DA7218_HPLDET_JACK_THR_92PCT,
DA7218_HPLDET_JACK_THR_96PCT,
};
struct da7218_hpldet_pdata {
enum da7218_hpldet_jack_rate jack_rate;
enum da7218_hpldet_jack_debounce jack_debounce;
enum da7218_hpldet_jack_thr jack_thr;
bool comp_inv;
bool hyst;
bool discharge;
};
struct da7218_pdata {
/* Mic */
enum da7218_micbias_voltage micbias1_lvl;
enum da7218_micbias_voltage micbias2_lvl;
enum da7218_mic_amp_in_sel mic1_amp_in_sel;
enum da7218_mic_amp_in_sel mic2_amp_in_sel;
/* DMIC */
enum da7218_dmic_data_sel dmic1_data_sel;
enum da7218_dmic_data_sel dmic2_data_sel;
enum da7218_dmic_samplephase dmic1_samplephase;
enum da7218_dmic_samplephase dmic2_samplephase;
enum da7218_dmic_clk_rate dmic1_clk_rate;
enum da7218_dmic_clk_rate dmic2_clk_rate;
/* HP Diff Supply - DA7217 only */
bool hp_diff_single_supply;
/* HP Detect - DA7218 only */
struct da7218_hpldet_pdata *hpldet_pdata;
};
#endif /* _DA7218_PDATA_H */
......@@ -58,6 +58,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_CX20442 if TTY
select SND_SOC_DA7210 if SND_SOC_I2C_AND_SPI
select SND_SOC_DA7213 if I2C
select SND_SOC_DA7218 if I2C
select SND_SOC_DA7219 if I2C
select SND_SOC_DA732X if I2C
select SND_SOC_DA9055 if I2C
......@@ -439,6 +440,9 @@ config SND_SOC_DA7210
config SND_SOC_DA7213
tristate
config SND_SOC_DA7218
tristate
config SND_SOC_DA7219
tristate
......
......@@ -50,6 +50,7 @@ snd-soc-cs4349-objs := cs4349.o
snd-soc-cx20442-objs := cx20442.o
snd-soc-da7210-objs := da7210.o
snd-soc-da7213-objs := da7213.o
snd-soc-da7218-objs := da7218.o
snd-soc-da7219-objs := da7219.o da7219-aad.o
snd-soc-da732x-objs := da732x.o
snd-soc-da9055-objs := da9055.o
......@@ -245,6 +246,7 @@ obj-$(CONFIG_SND_SOC_CS4349) += snd-soc-cs4349.o
obj-$(CONFIG_SND_SOC_CX20442) += snd-soc-cx20442.o
obj-$(CONFIG_SND_SOC_DA7210) += snd-soc-da7210.o
obj-$(CONFIG_SND_SOC_DA7213) += snd-soc-da7213.o
obj-$(CONFIG_SND_SOC_DA7218) += snd-soc-da7218.o
obj-$(CONFIG_SND_SOC_DA7219) += snd-soc-da7219.o
obj-$(CONFIG_SND_SOC_DA732X) += snd-soc-da732x.o
obj-$(CONFIG_SND_SOC_DA9055) += snd-soc-da9055.o
......
此差异已折叠。
此差异已折叠。
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册