提交 4d443a08 编写于 作者: K Kumar Sanghvi 提交者: David S. Miller

Documentation: Update Phonet doc for Pipe Controller implementation

Updates the Phonet document with description related to Pipe controller
implementation
Signed-off-by: NKumar Sanghvi <kumar.sanghvi@stericsson.com>
Acked-by: NLinus Walleij <linus.walleij@stericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 2ddaad39
......@@ -182,6 +182,59 @@ The pipe protocol provides two socket options at the SOL_PNPIPE level:
or zero if encapsulation is off.
Phonet Pipe-controller Implementation
-------------------------------------
Phonet Pipe-controller is enabled by selecting the CONFIG_PHONET_PIPECTRLR Kconfig
option. It is useful when communicating with those Nokia Modems which do not
implement Pipe controller in them e.g. Nokia Slim Modem used in ST-Ericsson
U8500 platform.
The implementation is based on the Data Connection Establishment Sequence
depicted in 'Nokia Wireless Modem API - Wireless_modem_user_guide.pdf'
document.
It allows a phonet sequenced socket (host-pep) to initiate a Pipe connection
between itself and a remote pipe-end point (e.g. modem).
The implementation adds socket options at SOL_PNPIPE level:
PNPIPE_CREATE
It accepts an integer argument where-in
lower order 16 bits: pn_dev and pn_port pair for remote pep.
higher order 16 bits: 8 bit pipe-handle
It sends a PNS_PEP_CONNECT_REQ on sequenced socket itself. On getting
PNS_PEP_CONNECT_RESP, it sends PNS_PEP_CONNECT_REQ to remote pep. On
getting response from remote pep, it selects the best possible Flow
control mechanism supported by remote-pep (modem) and then it sends
PNS_PEP_CREATED_IND to the sequenced socket and to the remote pep.
It then updates the pipe state associated with the sequenced socket to
be PIPE_DISABLED.
PNPIPE_ENABLE
It follows the same sequence as above for enabling a pipe by sending
PNS_PEP_ENABLE_REQ initially and then sending PNS_PEP_ENABLED_IND after
getting responses from sequenced socket and remote-pep.
It will also update the pipe state associated with the sequenced socket
to PIPE_ENABLED.
PNPIPE_DESTROY
This will send out PNS_PEP_DISCONNECT_REQ on the sequenced socket and
the remote pep.
It will also update the pipe state associated with the sequenced socket
to PIPE_IDLE
PNPIPE_INQ
This getsocktopt allows the user-space running on the sequenced socket
to examine the pipe state associated with that socket ie. whether the
pipe is created (PIPE_DISABLED) or enabled (PIPE_ENABLED) or disabled
(PIPE_DISABLED) or no pipe exists (PIPE_IDLE).
After a pipe has been created and enabled successfully, the Pipe data can be
exchanged between the host-pep and remote-pep (modem).
Authors
-------
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册