提交 4d3639ac 编写于 作者: L Linus Torvalds

Merge tag 'arm-soc-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "A batch of fixes that have come in during the merge window.

  Some of them are defconfig updates for things that have now landed,
  some errata additions and a few general scattered fixes.

  There's also a qcom DT update that adds support for SATA on AP148, and
  basic support for Sony Xperia Z1 and CM-QS600 platforms that seemed
  isolated enough that we could merge it even if it's late"

* tag 'arm-soc-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINERS: corrected bcm2835 search
  ARM: dts: Explicitly set dr_mode on exynos5420-arndale-octa
  ARM: dts: Explicitly set dr_mode on exynos Peach boards
  ARM: dts: qcom: add CM-QS600 board
  ARM: dts: qcom: Add initial DTS file for Sony Xperia Z1 phone
  ARM: dts: qcom: Add SATA support on IPQ8064/AP148
  MAINTAINERS: Update Santosh Shilimkar's email id
  ARM: sunxi_defconfig: enable CONFIG_REGULATOR
  ARM: dts: Disable smc91x on n900 until bootloader dependency is removed
  ARM: omap2plus_defconfig: Enable ARM erratum 430973 for omap3
  ARM: exynos_defconfig: enable USB gadget support
  ARM: exynos_defconfig: Enable Maxim 77693 and I2C GPIO drivers
  ARM: mm: Fix ifdef around cpu_*_do_[suspend, resume] ops
  ARM: EXYNOS: Fix build with PM_SLEEP=n and ARM_EXYNOS_CPUIDLE=n
  ARM: SAMSUNG: Restore Samsung PM Debug functionality
  ARM: dts: Fix pull setting in sd4_width8 pin group for exynos4x12
  ARM: exynos_defconfig: Enable SBS battery support
  ARM: exynos_defconfig: Enable Control Groups support
  ARM: exynos_defconfig: Enable Atmel maXTouch support
  ARM: exynos_defconfig: Enable MAX77802
......@@ -140,6 +140,7 @@ sitronix Sitronix Technology Corporation
smsc Standard Microsystems Corporation
snps Synopsys, Inc.
solidrun SolidRun
sony Sony Corporation
spansion Spansion Inc.
st STMicroelectronics
ste ST-Ericsson
......
......@@ -1088,33 +1088,33 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
ARM/TEXAS INSTRUMENT KEYSTONE ARCHITECTURE
M: Santosh Shilimkar <santosh.shilimkar@ti.com>
M: Santosh Shilimkar <ssantosh@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-keystone/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
ARM/TEXAS INSTRUMENT KEYSTONE CLOCK FRAMEWORK
M: Santosh Shilimkar <santosh.shilimkar@ti.com>
M: Santosh Shilimkar <ssantosh@kernel.org>
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/clk/keystone/
ARM/TEXAS INSTRUMENT KEYSTONE ClOCKSOURCE
M: Santosh Shilimkar <santosh.shilimkar@ti.com>
M: Santosh Shilimkar <ssantosh@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/clocksource/timer-keystone.c
ARM/TEXAS INSTRUMENT KEYSTONE RESET DRIVER
M: Santosh Shilimkar <santosh.shilimkar@ti.com>
M: Santosh Shilimkar <ssantosh@kernel.org>
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/power/reset/keystone-reset.c
ARM/TEXAS INSTRUMENT AEMIF/EMIF DRIVERS
M: Santosh Shilimkar <santosh.shilimkar@ti.com>
M: Santosh Shilimkar <ssantosh@kernel.org>
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/memory/*emif*
......@@ -2062,17 +2062,14 @@ F: arch/arm/configs/bcm_defconfig
F: drivers/mmc/host/sdhci-bcm-kona.c
F: drivers/clocksource/bcm_kona_timer.c
BROADCOM BCM2835 ARM ARCHICTURE
BROADCOM BCM2835 ARM ARCHITECTURE
M: Stephen Warren <swarren@wwwdotorg.org>
L: linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi.git
S: Maintained
F: arch/arm/mach-bcm/board_bcm2835.c
F: arch/arm/boot/dts/bcm2835*
F: arch/arm/configs/bcm2835_defconfig
F: drivers/*/*bcm2835*
N: bcm2835
BROADCOM BCM5301X ARM ARCHICTURE
BROADCOM BCM5301X ARM ARCHITECTURE
M: Hauke Mehrtens <hauke@hauke-m.de>
L: linux-arm-kernel@lists.infradead.org
S: Maintained
......@@ -6687,7 +6684,7 @@ F: arch/arm/*omap*/usb*
OMAP GPIO DRIVER
M: Javier Martinez Canillas <javier@dowhile0.org>
M: Santosh Shilimkar <santosh.shilimkar@ti.com>
M: Santosh Shilimkar <ssantosh@kernel.org>
M: Kevin Hilman <khilman@deeprootsystems.com>
L: linux-omap@vger.kernel.org
S: Maintained
......@@ -9274,7 +9271,7 @@ F: drivers/mmc/host/tifm_sd.c
F: include/linux/tifm.h
TI KEYSTONE MULTICORE NAVIGATOR DRIVERS
M: Santosh Shilimkar <santosh.shilimkar@ti.com>
M: Santosh Shilimkar <ssantosh@kernel.org>
L: linux-kernel@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
......
......@@ -354,13 +354,15 @@ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \
orion5x-rd88f5182-nas.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8064-cm-qs600.dtb \
qcom-apq8064-ifc6410.dtb \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
qcom-ipq8064-ap148.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb
qcom-msm8960-cdp.dtb \
qcom-msm8974-sony-xperia-honami.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3066a-bqcurie2.dtb \
rk3188-radxarock.dtb \
......
......@@ -675,7 +675,7 @@
sd4_bus8: sd4-bus-width8 {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <4>;
samsung,pin-pud = <4>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
......
......@@ -368,3 +368,7 @@
};
};
};
&usbdrd_dwc3_1 {
dr_mode = "host";
};
......@@ -838,6 +838,14 @@
status = "okay";
};
&usbdrd_dwc3_0 {
dr_mode = "host";
};
&usbdrd_dwc3_1 {
dr_mode = "host";
};
&usbdrd_phy0 {
vbus-supply = <&usb300_vbus_reg>;
};
......
......@@ -815,7 +815,7 @@
#size-cells = <1>;
ranges;
dwc3 {
usbdrd_dwc3_0: dwc3 {
compatible = "snps,dwc3";
reg = <0x12000000 0x10000>;
interrupts = <0 72 0>;
......@@ -841,7 +841,7 @@
#size-cells = <1>;
ranges;
dwc3 {
usbdrd_dwc3_1: dwc3 {
compatible = "snps,dwc3";
reg = <0x12400000 0x10000>;
interrupts = <0 73 0>;
......
......@@ -826,6 +826,14 @@
status = "okay";
};
&usbdrd_dwc3_0 {
dr_mode = "host";
};
&usbdrd_dwc3_1 {
dr_mode = "host";
};
&usbdrd_phy0 {
vbus-supply = <&usb300_vbus_reg>;
};
......
......@@ -659,6 +659,9 @@
ethernet@gpmc {
compatible = "smsc,lan91c94";
status = "disabled";
interrupt-parent = <&gpio2>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */
reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */
......
#include "qcom-apq8064-v2.0.dtsi"
/ {
model = "CompuLab CM-QS600";
compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
soc {
pinctrl@800000 {
i2c1_pins: i2c1 {
mux {
pins = "gpio20", "gpio21";
function = "gsbi1";
};
};
};
gsbi@12440000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C>;
i2c@12460000 {
status = "okay";
clock-frequency = <200000>;
pinctrl-0 = <&i2c1_pins>;
pinctrl-names = "default";
eeprom: eeprom@50 {
compatible = "24c02";
reg = <0x50>;
pagesize = <32>;
};
};
};
gsbi@16600000 {
status = "ok";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@16640000 {
status = "ok";
};
};
amba {
/* eMMC */
sdcc1: sdcc@12400000 {
status = "okay";
};
/* External micro SD card */
sdcc3: sdcc@12180000 {
status = "okay";
};
/* WLAN */
sdcc4: sdcc@121c0000 {
status = "okay";
};
};
};
};
......@@ -81,5 +81,13 @@
};
};
};
sata-phy@1b400000 {
status = "ok";
};
sata@29000000 {
status = "ok";
};
};
};
......@@ -234,6 +234,39 @@
};
};
sata_phy: sata-phy@1b400000 {
compatible = "qcom,ipq806x-sata-phy";
reg = <0x1b400000 0x200>;
clocks = <&gcc SATA_PHY_CFG_CLK>;
clock-names = "cfg";
#phy-cells = <0>;
status = "disabled";
};
sata@29000000 {
compatible = "qcom,ipq806x-ahci", "generic-ahci";
reg = <0x29000000 0x180>;
interrupts = <0 209 0x0>;
clocks = <&gcc SFAB_SATA_S_H_CLK>,
<&gcc SATA_H_CLK>,
<&gcc SATA_A_CLK>,
<&gcc SATA_RXOOB_CLK>,
<&gcc SATA_PMALIVE_CLK>;
clock-names = "slave_face", "iface", "core",
"rxoob", "pmalive";
assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
assigned-clock-rates = <100000000>, <100000000>;
phys = <&sata_phy>;
phy-names = "sata-phy";
status = "disabled";
};
qcom,ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x00500000 0x1000>;
......
#include "qcom-msm8974.dtsi"
/ {
model = "Sony Xperia Z1";
compatible = "sony,xperia-honami", "qcom,msm8974";
memory@0 {
reg = <0 0x40000000>, <0x40000000 0x40000000>;
device_type = "memory";
};
};
&soc {
serial@f991e000 {
status = "ok";
};
};
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_CGROUPS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
CONFIG_MODULES=y
......@@ -54,12 +55,14 @@ CONFIG_SMSC911X=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_GADGET=y
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_CROS_EC=y
# CONFIG_MOUSE_PS2 is not set
CONFIG_MOUSE_CYAPA=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
......@@ -68,15 +71,18 @@ CONFIG_HW_RANDOM=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_SPI=y
CONFIG_SPI_S3C64XX=y
CONFIG_I2C_S3C2410=y
CONFIG_DEBUG_GPIO=y
CONFIG_POWER_SUPPLY=y
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_TPS65090=y
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
......@@ -88,6 +94,7 @@ CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_I2C=y
CONFIG_MFD_CROS_EC_SPI=y
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_TPS65090=y
......@@ -96,6 +103,8 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX77686=y
CONFIG_REGULATOR_MAX77802=y
CONFIG_REGULATOR_MAX77693=y
CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
......@@ -115,6 +124,7 @@ CONFIG_SND_SOC=y
CONFIG_SND_SOC_SAMSUNG=y
CONFIG_SND_SOC_SNOW=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_EXYNOS=y
......
......@@ -51,6 +51,7 @@ CONFIG_SOC_AM43XX=y
CONFIG_SOC_DRA7XX=y
CONFIG_ARM_THUMBEE=y
CONFIG_ARM_ERRATA_411920=y
CONFIG_ARM_ERRATA_430973=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_CMA=y
......
......@@ -75,6 +75,7 @@ CONFIG_POWER_RESET_SUN6I=y
CONFIG_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=y
CONFIG_MFD_AXP20X=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_GPIO=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
......
......@@ -161,7 +161,9 @@ static void exynos_restart(enum reboot_mode mode, const char *cmd)
static struct platform_device exynos_cpuidle = {
.name = "exynos_cpuidle",
#ifdef CONFIG_ARM_EXYNOS_CPUIDLE
.dev.platform_data = exynos_enter_aftr,
#endif
.id = -1,
};
......
......@@ -279,7 +279,7 @@ ENTRY(\name\()_processor_functions)
.if \suspend
.word cpu_\name\()_suspend_size
#ifdef CONFIG_PM_SLEEP
#ifdef CONFIG_ARM_CPU_SUSPEND
.word cpu_\name\()_do_suspend
.word cpu_\name\()_do_resume
#else
......
......@@ -268,8 +268,9 @@ config S5P_DEV_MFC
comment "Power management"
config SAMSUNG_PM_DEBUG
bool "S3C2410 PM Suspend debug"
depends on PM && DEBUG_KERNEL && DEBUG_S3C_UART
bool "Samsung PM Suspend debug"
depends on PM && DEBUG_KERNEL
depends on DEBUG_EXYNOS_UART || DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART
help
Say Y here if you want verbose debugging from the PM Suspend and
Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
......
......@@ -14,6 +14,7 @@
*/
#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/io.h>
#include <asm/mach/map.h>
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册