提交 4d1de975 编写于 作者: J Jani Nikula

drm/i915/bxt: add dsi transcoders

The BXT display connections have DSI transcoders A and C that can be
muxed to any pipe, not unlike the eDP transcoder. Add the notion of DSI
transcoders.

The "normal" transcoders A, B and C are not used with BXT DSI, so care
must be taken to avoid accessing those registers with DSI transcoders in
the hardware state readout, modeset, and generally everywhere.

v2: addressing comments by Ville:
 - rename the dsi get config function to hsw_get_dsi_transcoder_state
 - rebase onto the higher level split of pipe/transcoder functions
 - use more has_dsi_encoder as we can now because of the above,
   with no need to look at the transcoder so much
 - rename IS_DSI_TRANSCODER to transcoder_is_dsi
 - use the above a bit more instead of comparing to < TRANSCODER_EDP
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/299740536b7941e31b2744f3ce34f7afe936a771.1458313400.git.jani.nikula@intel.com
上级 cf30429e
......@@ -127,6 +127,8 @@ enum transcoder {
TRANSCODER_B,
TRANSCODER_C,
TRANSCODER_EDP,
TRANSCODER_DSI_A,
TRANSCODER_DSI_C,
I915_MAX_TRANSCODERS
};
......@@ -141,11 +143,20 @@ static inline const char *transcoder_name(enum transcoder transcoder)
return "C";
case TRANSCODER_EDP:
return "EDP";
case TRANSCODER_DSI_A:
return "DSI A";
case TRANSCODER_DSI_C:
return "DSI C";
default:
return "<invalid>";
}
}
static inline bool transcoder_is_dsi(enum transcoder transcoder)
{
return transcoder == TRANSCODER_DSI_A || transcoder == TRANSCODER_DSI_C;
}
/*
* I915_MAX_PLANES in the enum below is the maximum (across all platforms)
* number of planes per CRTC. Not all platforms really have this many planes,
......@@ -196,6 +207,8 @@ enum intel_display_power_domain {
POWER_DOMAIN_TRANSCODER_B,
POWER_DOMAIN_TRANSCODER_C,
POWER_DOMAIN_TRANSCODER_EDP,
POWER_DOMAIN_TRANSCODER_DSI_A,
POWER_DOMAIN_TRANSCODER_DSI_C,
POWER_DOMAIN_PORT_DDI_A_LANES,
POWER_DOMAIN_PORT_DDI_B_LANES,
POWER_DOMAIN_PORT_DDI_C_LANES,
......
......@@ -1061,6 +1061,8 @@ void intel_ddi_set_pipe_settings(struct drm_crtc *crtc)
uint32_t temp;
if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP || type == INTEL_OUTPUT_DP_MST) {
WARN_ON(transcoder_is_dsi(cpu_transcoder));
temp = TRANS_MSA_SYNC_CLK;
switch (intel_crtc->config->pipe_bpp) {
case 18:
......@@ -1942,6 +1944,10 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
struct intel_hdmi *intel_hdmi;
u32 temp, flags = 0;
/* XXX: DSI transcoder paranoia */
if (WARN_ON(transcoder_is_dsi(cpu_transcoder)))
return;
temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
if (temp & TRANS_DDI_PHSYNC)
flags |= DRM_MODE_FLAG_PHSYNC;
......
......@@ -4900,6 +4900,7 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *encoder;
int pipe = intel_crtc->pipe, hsw_workaround_pipe;
enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
struct intel_crtc_state *pipe_config =
to_intel_crtc_state(crtc->state);
......@@ -4916,11 +4917,14 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
if (intel_crtc->config->has_dp_encoder)
intel_dp_set_m_n(intel_crtc, M1_N1);
intel_set_pipe_timings(intel_crtc);
if (!intel_crtc->config->has_dsi_encoder)
intel_set_pipe_timings(intel_crtc);
intel_set_pipe_src_size(intel_crtc);
if (intel_crtc->config->cpu_transcoder != TRANSCODER_EDP) {
I915_WRITE(PIPE_MULT(intel_crtc->config->cpu_transcoder),
if (cpu_transcoder != TRANSCODER_EDP &&
!transcoder_is_dsi(cpu_transcoder)) {
I915_WRITE(PIPE_MULT(cpu_transcoder),
intel_crtc->config->pixel_multiplier - 1);
}
......@@ -4929,7 +4933,9 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
&intel_crtc->config->fdi_m_n, NULL);
}
haswell_set_pipeconf(crtc);
if (!intel_crtc->config->has_dsi_encoder)
haswell_set_pipeconf(crtc);
haswell_set_pipe_gamma(crtc);
haswell_set_pipemisc(crtc);
......@@ -4972,7 +4978,10 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
dev_priv->display.initial_watermarks(pipe_config);
else
intel_update_watermarks(crtc);
intel_enable_pipe(intel_crtc);
/* XXX: Do the pipe assertions at the right place for BXT DSI. */
if (!intel_crtc->config->has_dsi_encoder)
intel_enable_pipe(intel_crtc);
if (intel_crtc->config->has_pch_encoder)
lpt_pch_enable(crtc);
......@@ -5105,7 +5114,9 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
drm_crtc_vblank_off(crtc);
assert_vblank_disabled(crtc);
intel_disable_pipe(intel_crtc);
/* XXX: Do the pipe assertions at the right place for BXT DSI. */
if (!intel_crtc->config->has_dsi_encoder)
intel_disable_pipe(intel_crtc);
if (intel_crtc->config->dp_encoder_is_mst)
intel_ddi_set_vc_payload_alloc(crtc, false);
......@@ -9957,6 +9968,47 @@ static bool hsw_get_transcoder_state(struct intel_crtc *crtc,
return tmp & PIPECONF_ENABLE;
}
static bool bxt_get_dsi_transcoder_state(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config,
unsigned long *power_domain_mask)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum intel_display_power_domain power_domain;
enum port port;
enum transcoder cpu_transcoder;
u32 tmp;
pipe_config->has_dsi_encoder = false;
for_each_port_masked(port, BIT(PORT_A) | BIT(PORT_C)) {
if (port == PORT_A)
cpu_transcoder = TRANSCODER_DSI_A;
else
cpu_transcoder = TRANSCODER_DSI_C;
power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder);
if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
continue;
*power_domain_mask |= BIT(power_domain);
/* XXX: this works for video mode only */
tmp = I915_READ(BXT_MIPI_PORT_CTRL(port));
if (!(tmp & DPI_ENABLE))
continue;
tmp = I915_READ(MIPI_CTRL(port));
if ((tmp & BXT_PIPE_SELECT_MASK) != BXT_PIPE_SELECT(crtc->pipe))
continue;
pipe_config->cpu_transcoder = cpu_transcoder;
pipe_config->has_dsi_encoder = true;
break;
}
return pipe_config->has_dsi_encoder;
}
static void haswell_get_ddi_port_state(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config)
{
......@@ -10018,12 +10070,22 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
active = hsw_get_transcoder_state(crtc, pipe_config, &power_domain_mask);
if (IS_BROXTON(dev_priv)) {
bxt_get_dsi_transcoder_state(crtc, pipe_config,
&power_domain_mask);
WARN_ON(active && pipe_config->has_dsi_encoder);
if (pipe_config->has_dsi_encoder)
active = true;
}
if (!active)
goto out;
haswell_get_ddi_port_state(crtc, pipe_config);
if (!pipe_config->has_dsi_encoder) {
haswell_get_ddi_port_state(crtc, pipe_config);
intel_get_pipe_timings(crtc, pipe_config);
}
intel_get_pipe_timings(crtc, pipe_config);
intel_get_pipe_src_size(crtc, pipe_config);
if (INTEL_INFO(dev)->gen >= 9) {
......@@ -10048,7 +10110,8 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
pipe_config->ips_enabled = hsw_crtc_supports_ips(crtc) &&
(I915_READ(IPS_CTL) & IPS_ENABLE);
if (pipe_config->cpu_transcoder != TRANSCODER_EDP) {
if (pipe_config->cpu_transcoder != TRANSCODER_EDP &&
!transcoder_is_dsi(pipe_config->cpu_transcoder)) {
pipe_config->pixel_multiplier =
I915_READ(PIPE_MULT(pipe_config->cpu_transcoder)) + 1;
} else {
......@@ -15520,10 +15583,15 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
i915_reg_t reg = PIPECONF(crtc->config->cpu_transcoder);
enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
/* Clear any frame start delays used for debugging left by the BIOS */
I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
if (!transcoder_is_dsi(cpu_transcoder)) {
i915_reg_t reg = PIPECONF(cpu_transcoder);
I915_WRITE(reg,
I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
}
/* restore vblank interrupts to correct state */
drm_crtc_vblank_reset(&crtc->base);
......@@ -16194,6 +16262,7 @@ intel_display_capture_error_state(struct drm_device *dev)
error->pipe[i].stat = I915_READ(PIPESTAT(i));
}
/* Note: this does not include DSI transcoders. */
error->num_transcoders = INTEL_INFO(dev)->num_pipes;
if (HAS_DDI(dev_priv->dev))
error->num_transcoders++; /* Account for eDP. */
......
......@@ -437,7 +437,8 @@ struct intel_crtc_state {
bool has_infoframe;
/* CPU Transcoder for the pipe. Currently this can only differ from the
* pipe on Haswell (where we have a special eDP transcoder). */
* pipe on Haswell and later (where we have a special eDP transcoder)
* and Broxton (where we have special DSI transcoders). */
enum transcoder cpu_transcoder;
/*
......
......@@ -268,6 +268,7 @@ static inline bool is_cmd_mode(struct intel_dsi *intel_dsi)
static bool intel_dsi_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
{
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
struct intel_dsi *intel_dsi = container_of(encoder, struct intel_dsi,
base);
struct intel_connector *intel_connector = intel_dsi->attached_connector;
......@@ -284,6 +285,14 @@ static bool intel_dsi_compute_config(struct intel_encoder *encoder,
/* DSI uses short packets for sync events, so clear mode flags for DSI */
adjusted_mode->flags = 0;
if (IS_BROXTON(dev_priv)) {
/* Dual link goes to DSI transcoder A. */
if (intel_dsi->ports == BIT(PORT_C))
pipe_config->cpu_transcoder = TRANSCODER_DSI_C;
else
pipe_config->cpu_transcoder = TRANSCODER_DSI_A;
}
return true;
}
......
......@@ -89,6 +89,10 @@ intel_display_power_domain_str(enum intel_display_power_domain domain)
return "TRANSCODER_C";
case POWER_DOMAIN_TRANSCODER_EDP:
return "TRANSCODER_EDP";
case POWER_DOMAIN_TRANSCODER_DSI_A:
return "TRANSCODER_DSI_A";
case POWER_DOMAIN_TRANSCODER_DSI_C:
return "TRANSCODER_DSI_C";
case POWER_DOMAIN_PORT_DDI_A_LANES:
return "PORT_DDI_A_LANES";
case POWER_DOMAIN_PORT_DDI_B_LANES:
......@@ -419,6 +423,8 @@ static void hsw_set_power_well(struct drm_i915_private *dev_priv,
BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS | \
BIT(POWER_DOMAIN_PIPE_A) | \
BIT(POWER_DOMAIN_TRANSCODER_EDP) | \
BIT(POWER_DOMAIN_TRANSCODER_DSI_A) | \
BIT(POWER_DOMAIN_TRANSCODER_DSI_C) | \
BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER) | \
BIT(POWER_DOMAIN_PORT_DDI_A_LANES) | \
BIT(POWER_DOMAIN_PORT_DSI) | \
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册