提交 4ce20abc 编写于 作者: S Stefan Assmann 提交者: Jeff Kirsher

i40e: fix MSI-X vector redistribution if hw limit is reached

The driver allocates 1 vector per CPU thread and the current hardware
limit for vectors is 129 per PF. On systems with 128 or more threads
this currently means all vectors are used by the PF leaving no room for
additional features like VMDq, iWARP, etc...
The code that should redistribute the vectors in this case is broken and
never triggers. Fixed the code so that it actually triggers if the
hardware limit is reached and adjust the number of queue pairs
accordingly.
Also the number of initially requested iWARP vectors was not properly
saved when the vector limit was reached, and therefore always zero.

Comparison with debug statement.
Before:
i40e 0000:2d:00.0: VMDq disabled, not enough MSI-X vectors
i40e 0000:2d:00.0: IWARP disabled, not enough MSI-X vectors
i40e 00.0 MSI-X vector distribution: PF 128, VMDq 0, FDSB 0, iWARP 0
After:
i40e 0000:2d:00.0: MSI-X vector limit reached, attempting to redistribute vectors
i40e 00.0 MSI-X vector distribution: PF 78, VMDq 8, FDSB 0, iWARP 42
Signed-off-by: NStefan Assmann <sassmann@kpanic.de>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
上级 9ca57e97
......@@ -7661,6 +7661,8 @@ static int i40e_init_msix(struct i40e_pf *pf)
#endif
/* can we reserve enough for iWARP? */
if (pf->flags & I40E_FLAG_IWARP_ENABLED) {
iwarp_requested = pf->num_iwarp_msix;
if (!vectors_left)
pf->num_iwarp_msix = 0;
else if (vectors_left < pf->num_iwarp_msix)
......@@ -7702,21 +7704,6 @@ static int i40e_init_msix(struct i40e_pf *pf)
pf->msix_entries[i].entry = i;
v_actual = i40e_reserve_msix_vectors(pf, v_budget);
if (v_actual != v_budget) {
/* If we have limited resources, we will start with no vectors
* for the special features and then allocate vectors to some
* of these features based on the policy and at the end disable
* the features that did not get any vectors.
*/
iwarp_requested = pf->num_iwarp_msix;
pf->num_iwarp_msix = 0;
#ifdef I40E_FCOE
pf->num_fcoe_qps = 0;
pf->num_fcoe_msix = 0;
#endif
pf->num_vmdq_msix = 0;
}
if (v_actual < I40E_MIN_MSIX) {
pf->flags &= ~I40E_FLAG_MSIX_ENABLED;
kfree(pf->msix_entries);
......@@ -7730,9 +7717,16 @@ static int i40e_init_msix(struct i40e_pf *pf)
pf->num_lan_qps = 1;
pf->num_lan_msix = 1;
} else if (v_actual != v_budget) {
} else if (!vectors_left) {
/* If we have limited resources, we will start with no vectors
* for the special features and then allocate vectors to some
* of these features based on the policy and at the end disable
* the features that did not get any vectors.
*/
int vec;
dev_info(&pf->pdev->dev,
"MSI-X vector limit reached, attempting to redistribute vectors\n");
/* reserve the misc vector */
vec = v_actual - 1;
......@@ -7740,6 +7734,10 @@ static int i40e_init_msix(struct i40e_pf *pf)
pf->num_vmdq_msix = 1; /* force VMDqs to only one vector */
pf->num_vmdq_vsis = 1;
pf->num_vmdq_qps = 1;
#ifdef I40E_FCOE
pf->num_fcoe_qps = 0;
pf->num_fcoe_msix = 0;
#endif
pf->flags &= ~I40E_FLAG_FD_SB_ENABLED;
/* partition out the remaining vectors */
......@@ -7775,6 +7773,7 @@ static int i40e_init_msix(struct i40e_pf *pf)
pf->num_lan_msix = min_t(int,
(vec - (pf->num_iwarp_msix + pf->num_vmdq_vsis)),
pf->num_lan_msix);
pf->num_lan_qps = pf->num_lan_msix;
#ifdef I40E_FCOE
/* give one vector to FCoE */
if (pf->flags & I40E_FLAG_FCOE_ENABLED) {
......@@ -7804,6 +7803,13 @@ static int i40e_init_msix(struct i40e_pf *pf)
pf->flags &= ~I40E_FLAG_FCOE_ENABLED;
}
#endif
i40e_debug(&pf->hw, I40E_DEBUG_INIT,
"MSI-X vector distribution: PF %d, VMDq %d, FDSB %d, iWARP %d\n",
pf->num_lan_msix,
pf->num_vmdq_msix * pf->num_vmdq_vsis,
pf->num_fdsb_msix,
pf->num_iwarp_msix);
return v_actual;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册