提交 4c4a6b0e 编写于 作者: P Philippe Reynes 提交者: David S. Miller

net: ethernet: gianfar: use phydev from struct net_device

The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phydev in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Acked-by: NClaudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 7e2c3aea
......@@ -999,7 +999,7 @@ static int gfar_hwtstamp_get(struct net_device *netdev, struct ifreq *ifr)
static int gfar_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
struct gfar_private *priv = netdev_priv(dev);
struct phy_device *phydev = dev->phydev;
if (!netif_running(dev))
return -EINVAL;
......@@ -1009,10 +1009,10 @@ static int gfar_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
if (cmd == SIOCGHWTSTAMP)
return gfar_hwtstamp_get(dev, rq);
if (!priv->phydev)
if (!phydev)
return -ENODEV;
return phy_mii_ioctl(priv->phydev, rq, cmd);
return phy_mii_ioctl(phydev, rq, cmd);
}
static u32 cluster_entry_per_class(struct gfar_private *priv, u32 rqfar,
......@@ -1635,7 +1635,7 @@ static int gfar_suspend(struct device *dev)
gfar_start_wol_filer(priv);
} else {
phy_stop(priv->phydev);
phy_stop(ndev->phydev);
}
return 0;
......@@ -1664,7 +1664,7 @@ static int gfar_resume(struct device *dev)
gfar_filer_restore_table(priv);
} else {
phy_start(priv->phydev);
phy_start(ndev->phydev);
}
gfar_start(priv);
......@@ -1698,8 +1698,8 @@ static int gfar_restore(struct device *dev)
priv->oldspeed = 0;
priv->oldduplex = -1;
if (priv->phydev)
phy_start(priv->phydev);
if (ndev->phydev)
phy_start(ndev->phydev);
netif_device_attach(ndev);
enable_napi(priv);
......@@ -1778,6 +1778,7 @@ static int init_phy(struct net_device *dev)
priv->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ?
GFAR_SUPPORTED_GBIT : 0;
phy_interface_t interface;
struct phy_device *phydev;
priv->oldlink = 0;
priv->oldspeed = 0;
......@@ -1785,9 +1786,9 @@ static int init_phy(struct net_device *dev)
interface = gfar_get_interface(dev);
priv->phydev = of_phy_connect(dev, priv->phy_node, &adjust_link, 0,
interface);
if (!priv->phydev) {
phydev = of_phy_connect(dev, priv->phy_node, &adjust_link, 0,
interface);
if (!phydev) {
dev_err(&dev->dev, "could not attach to PHY\n");
return -ENODEV;
}
......@@ -1796,11 +1797,11 @@ static int init_phy(struct net_device *dev)
gfar_configure_serdes(dev);
/* Remove any features not supported by the controller */
priv->phydev->supported &= (GFAR_SUPPORTED | gigabit_support);
priv->phydev->advertising = priv->phydev->supported;
phydev->supported &= (GFAR_SUPPORTED | gigabit_support);
phydev->advertising = phydev->supported;
/* Add support for flow control, but don't advertise it by default */
priv->phydev->supported |= (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
phydev->supported |= (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
return 0;
}
......@@ -1944,7 +1945,7 @@ void stop_gfar(struct net_device *dev)
/* disable ints and gracefully shut down Rx/Tx DMA */
gfar_halt(priv);
phy_stop(priv->phydev);
phy_stop(dev->phydev);
free_skb_resources(priv);
}
......@@ -2204,7 +2205,7 @@ int startup_gfar(struct net_device *ndev)
priv->oldspeed = 0;
priv->oldduplex = -1;
phy_start(priv->phydev);
phy_start(ndev->phydev);
enable_napi(priv);
......@@ -2572,8 +2573,7 @@ static int gfar_close(struct net_device *dev)
stop_gfar(dev);
/* Disconnect from the PHY */
phy_disconnect(priv->phydev);
priv->phydev = NULL;
phy_disconnect(dev->phydev);
gfar_free_irq(priv);
......@@ -3379,7 +3379,7 @@ static irqreturn_t gfar_interrupt(int irq, void *grp_id)
static void adjust_link(struct net_device *dev)
{
struct gfar_private *priv = netdev_priv(dev);
struct phy_device *phydev = priv->phydev;
struct phy_device *phydev = dev->phydev;
if (unlikely(phydev->link != priv->oldlink ||
(phydev->link && (phydev->duplex != priv->oldduplex ||
......@@ -3620,7 +3620,8 @@ static irqreturn_t gfar_error(int irq, void *grp_id)
static u32 gfar_get_flowctrl_cfg(struct gfar_private *priv)
{
struct phy_device *phydev = priv->phydev;
struct net_device *ndev = priv->ndev;
struct phy_device *phydev = ndev->phydev;
u32 val = 0;
if (!phydev->duplex)
......@@ -3660,7 +3661,8 @@ static u32 gfar_get_flowctrl_cfg(struct gfar_private *priv)
static noinline void gfar_update_link_state(struct gfar_private *priv)
{
struct gfar __iomem *regs = priv->gfargrp[0].regs;
struct phy_device *phydev = priv->phydev;
struct net_device *ndev = priv->ndev;
struct phy_device *phydev = ndev->phydev;
struct gfar_priv_rx_q *rx_queue = NULL;
int i;
......
......@@ -1153,7 +1153,6 @@ struct gfar_private {
phy_interface_t interface;
struct device_node *phy_node;
struct device_node *tbi_node;
struct phy_device *phydev;
struct mii_bus *mii_bus;
int oldspeed;
int oldduplex;
......
......@@ -188,10 +188,9 @@ static void gfar_gdrvinfo(struct net_device *dev,
static int gfar_set_ksettings(struct net_device *dev,
const struct ethtool_link_ksettings *cmd)
{
struct gfar_private *priv = netdev_priv(dev);
struct phy_device *phydev = priv->phydev;
struct phy_device *phydev = dev->phydev;
if (NULL == phydev)
if (!phydev)
return -ENODEV;
return phy_ethtool_ksettings_set(phydev, cmd);
......@@ -200,10 +199,9 @@ static int gfar_set_ksettings(struct net_device *dev,
static int gfar_get_ksettings(struct net_device *dev,
struct ethtool_link_ksettings *cmd)
{
struct gfar_private *priv = netdev_priv(dev);
struct phy_device *phydev = priv->phydev;
struct phy_device *phydev = dev->phydev;
if (NULL == phydev)
if (!phydev)
return -ENODEV;
return phy_ethtool_ksettings_get(phydev, cmd);
......@@ -233,10 +231,12 @@ static void gfar_get_regs(struct net_device *dev, struct ethtool_regs *regs,
static unsigned int gfar_usecs2ticks(struct gfar_private *priv,
unsigned int usecs)
{
struct net_device *ndev = priv->ndev;
struct phy_device *phydev = ndev->phydev;
unsigned int count;
/* The timer is different, depending on the interface speed */
switch (priv->phydev->speed) {
switch (phydev->speed) {
case SPEED_1000:
count = GFAR_GBIT_TIME;
break;
......@@ -258,10 +258,12 @@ static unsigned int gfar_usecs2ticks(struct gfar_private *priv,
static unsigned int gfar_ticks2usecs(struct gfar_private *priv,
unsigned int ticks)
{
struct net_device *ndev = priv->ndev;
struct phy_device *phydev = ndev->phydev;
unsigned int count;
/* The timer is different, depending on the interface speed */
switch (priv->phydev->speed) {
switch (phydev->speed) {
case SPEED_1000:
count = GFAR_GBIT_TIME;
break;
......@@ -295,7 +297,7 @@ static int gfar_gcoalesce(struct net_device *dev,
if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE))
return -EOPNOTSUPP;
if (NULL == priv->phydev)
if (!dev->phydev)
return -ENODEV;
rx_queue = priv->rx_queue[0];
......@@ -356,7 +358,7 @@ static int gfar_scoalesce(struct net_device *dev,
if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE))
return -EOPNOTSUPP;
if (NULL == priv->phydev)
if (!dev->phydev)
return -ENODEV;
/* Check the bounds of the values */
......@@ -520,7 +522,7 @@ static int gfar_spauseparam(struct net_device *dev,
struct ethtool_pauseparam *epause)
{
struct gfar_private *priv = netdev_priv(dev);
struct phy_device *phydev = priv->phydev;
struct phy_device *phydev = dev->phydev;
struct gfar __iomem *regs = priv->gfargrp[0].regs;
u32 oldadv, newadv;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册