提交 4bc71cb9 编写于 作者: J Jiri Pirko 提交者: David S. Miller

net: consolidate and fix ethtool_ops->get_settings calling

This patch does several things:
- introduces __ethtool_get_settings which is called from ethtool code and
  from drivers as well. Put ASSERT_RTNL there.
- dev_ethtool_get_settings() is replaced by __ethtool_get_settings()
- changes calling in drivers so rtnl locking is respected. In
  iboe_get_rate was previously ->get_settings() called unlocked. This
  fixes it. Also prb_calc_retire_blk_tmo() in af_packet.c had the same
  problem. Also fixed by calling __dev_get_by_index() instead of
  dev_get_by_index() and holding rtnl_lock for both calls.
- introduces rtnl_lock in bnx2fc_vport_create() and fcoe_vport_create()
  so bnx2fc_if_create() and fcoe_if_create() are called locked as they
  are from other places.
- use __ethtool_get_settings() in bonding code
Signed-off-by: NJiri Pirko <jpirko@redhat.com>

v2->v3:
	-removed dev_ethtool_get_settings()
	-added ASSERT_RTNL into __ethtool_get_settings()
	-prb_calc_retire_blk_tmo - use __dev_get_by_index() and lock
	 around it and __ethtool_get_settings() call
v1->v2:
        add missing export_symbol
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> [except FCoE bits]
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 c5dac7c9
......@@ -321,7 +321,7 @@ void __init tx4939_sio_init(unsigned int sclk, unsigned int cts_mask)
static u32 tx4939_get_eth_speed(struct net_device *dev)
{
struct ethtool_cmd cmd;
if (dev_ethtool_get_settings(dev, &cmd))
if (__ethtool_get_settings(dev, &cmd))
return 100; /* default 100Mbps */
return ethtool_cmd_speed(&cmd);
......
......@@ -557,7 +557,7 @@ static int bond_set_carrier(struct bonding *bond)
static int bond_update_speed_duplex(struct slave *slave)
{
struct net_device *slave_dev = slave->dev;
struct ethtool_cmd etool = { .cmd = ETHTOOL_GSET };
struct ethtool_cmd ecmd;
u32 slave_speed;
int res;
......@@ -565,18 +565,15 @@ static int bond_update_speed_duplex(struct slave *slave)
slave->speed = SPEED_100;
slave->duplex = DUPLEX_FULL;
if (!slave_dev->ethtool_ops || !slave_dev->ethtool_ops->get_settings)
return -1;
res = slave_dev->ethtool_ops->get_settings(slave_dev, &etool);
res = __ethtool_get_settings(slave_dev, &ecmd);
if (res < 0)
return -1;
slave_speed = ethtool_cmd_speed(&etool);
slave_speed = ethtool_cmd_speed(&ecmd);
if (slave_speed == 0 || slave_speed == ((__u32) -1))
return -1;
switch (etool.duplex) {
switch (ecmd.duplex) {
case DUPLEX_FULL:
case DUPLEX_HALF:
break;
......@@ -585,7 +582,7 @@ static int bond_update_speed_duplex(struct slave *slave)
}
slave->speed = slave_speed;
slave->duplex = etool.duplex;
slave->duplex = ecmd.duplex;
return 0;
}
......
......@@ -543,7 +543,8 @@ static int macvlan_ethtool_get_settings(struct net_device *dev,
struct ethtool_cmd *cmd)
{
const struct macvlan_dev *vlan = netdev_priv(dev);
return dev_ethtool_get_settings(vlan->lowerdev, cmd);
return __ethtool_get_settings(vlan->lowerdev, cmd);
}
static const struct ethtool_ops macvlan_ethtool_ops = {
......
......@@ -673,7 +673,7 @@ static void bnx2fc_link_speed_update(struct fc_lport *lport)
struct net_device *netdev = interface->netdev;
struct ethtool_cmd ecmd;
if (!dev_ethtool_get_settings(netdev, &ecmd)) {
if (!__ethtool_get_settings(netdev, &ecmd)) {
lport->link_supported_speeds &=
~(FC_PORTSPEED_1GBIT | FC_PORTSPEED_10GBIT);
if (ecmd.supported & (SUPPORTED_1000baseT_Half |
......@@ -1001,9 +1001,11 @@ static int bnx2fc_vport_create(struct fc_vport *vport, bool disabled)
"this interface\n");
return -EIO;
}
rtnl_lock();
mutex_lock(&bnx2fc_dev_lock);
vn_port = bnx2fc_if_create(interface, &vport->dev, 1);
mutex_unlock(&bnx2fc_dev_lock);
rtnl_unlock();
if (IS_ERR(vn_port)) {
printk(KERN_ERR PFX "bnx2fc_vport_create (%s) failed\n",
......
......@@ -2043,7 +2043,7 @@ int fcoe_link_speed_update(struct fc_lport *lport)
struct net_device *netdev = fcoe_netdev(lport);
struct ethtool_cmd ecmd;
if (!dev_ethtool_get_settings(netdev, &ecmd)) {
if (!__ethtool_get_settings(netdev, &ecmd)) {
lport->link_supported_speeds &=
~(FC_PORTSPEED_1GBIT | FC_PORTSPEED_10GBIT);
if (ecmd.supported & (SUPPORTED_1000baseT_Half |
......@@ -2452,7 +2452,9 @@ static int fcoe_vport_create(struct fc_vport *vport, bool disabled)
}
mutex_lock(&fcoe_config_mutex);
rtnl_lock();
vn_port = fcoe_if_create(fcoe, &vport->dev, 1);
rtnl_unlock();
mutex_unlock(&fcoe_config_mutex);
if (IS_ERR(vn_port)) {
......
......@@ -728,6 +728,9 @@ enum ethtool_sfeatures_retval_bits {
/* needed by dev_disable_lro() */
extern int __ethtool_set_flags(struct net_device *dev, u32 flags);
extern int __ethtool_get_settings(struct net_device *dev,
struct ethtool_cmd *cmd);
/**
* enum ethtool_phys_id_state - indicator state for physical identification
* @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated
......
......@@ -2589,9 +2589,6 @@ static inline int netif_is_bond_slave(struct net_device *dev)
extern struct pernet_operations __net_initdata loopback_net_ops;
int dev_ethtool_get_settings(struct net_device *dev,
struct ethtool_cmd *cmd);
static inline u32 dev_ethtool_get_rx_csum(struct net_device *dev)
{
if (dev->features & NETIF_F_RXCSUM)
......
......@@ -218,8 +218,12 @@ static inline int iboe_get_rate(struct net_device *dev)
{
struct ethtool_cmd cmd;
u32 speed;
int err;
if (dev_ethtool_get_settings(dev, &cmd))
rtnl_lock();
err = __ethtool_get_settings(dev, &cmd);
rtnl_unlock();
if (err)
return IB_RATE_PORT_CURRENT;
speed = ethtool_cmd_speed(&cmd);
......
......@@ -610,7 +610,8 @@ static int vlan_ethtool_get_settings(struct net_device *dev,
struct ethtool_cmd *cmd)
{
const struct vlan_dev_info *vlan = vlan_dev_info(dev);
return dev_ethtool_get_settings(vlan->real_dev, cmd);
return __ethtool_get_settings(vlan->real_dev, cmd);
}
static void vlan_ethtool_get_drvinfo(struct net_device *dev,
......
......@@ -35,7 +35,7 @@ static int port_cost(struct net_device *dev)
{
struct ethtool_cmd ecmd;
if (!dev_ethtool_get_settings(dev, &ecmd)) {
if (!__ethtool_get_settings(dev, &ecmd)) {
switch (ethtool_cmd_speed(&ecmd)) {
case SPEED_10000:
return 2;
......
......@@ -4565,30 +4565,6 @@ void dev_set_rx_mode(struct net_device *dev)
netif_addr_unlock_bh(dev);
}
/**
* dev_ethtool_get_settings - call device's ethtool_ops::get_settings()
* @dev: device
* @cmd: memory area for ethtool_ops::get_settings() result
*
* The cmd arg is initialized properly (cleared and
* ethtool_cmd::cmd field set to ETHTOOL_GSET).
*
* Return device's ethtool_ops::get_settings() result value or
* -EOPNOTSUPP when device doesn't expose
* ethtool_ops::get_settings() operation.
*/
int dev_ethtool_get_settings(struct net_device *dev,
struct ethtool_cmd *cmd)
{
if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings)
return -EOPNOTSUPP;
memset(cmd, 0, sizeof(struct ethtool_cmd));
cmd->cmd = ETHTOOL_GSET;
return dev->ethtool_ops->get_settings(dev, cmd);
}
EXPORT_SYMBOL(dev_ethtool_get_settings);
/**
* dev_get_flags - get flags reported to userspace
* @dev: device
......
......@@ -569,15 +569,25 @@ int __ethtool_set_flags(struct net_device *dev, u32 data)
return 0;
}
static int ethtool_get_settings(struct net_device *dev, void __user *useraddr)
int __ethtool_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct ethtool_cmd cmd = { .cmd = ETHTOOL_GSET };
int err;
ASSERT_RTNL();
if (!dev->ethtool_ops->get_settings)
if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings)
return -EOPNOTSUPP;
err = dev->ethtool_ops->get_settings(dev, &cmd);
memset(cmd, 0, sizeof(struct ethtool_cmd));
cmd->cmd = ETHTOOL_GSET;
return dev->ethtool_ops->get_settings(dev, cmd);
}
EXPORT_SYMBOL(__ethtool_get_settings);
static int ethtool_get_settings(struct net_device *dev, void __user *useraddr)
{
int err;
struct ethtool_cmd cmd;
err = __ethtool_get_settings(dev, &cmd);
if (err < 0)
return err;
......
......@@ -147,7 +147,7 @@ static ssize_t show_speed(struct device *dev,
if (netif_running(netdev)) {
struct ethtool_cmd cmd;
if (!dev_ethtool_get_settings(netdev, &cmd))
if (!__ethtool_get_settings(netdev, &cmd))
ret = sprintf(buf, fmt_udec, ethtool_cmd_speed(&cmd));
}
rtnl_unlock();
......@@ -165,7 +165,7 @@ static ssize_t show_duplex(struct device *dev,
if (netif_running(netdev)) {
struct ethtool_cmd cmd;
if (!dev_ethtool_get_settings(netdev, &cmd))
if (!__ethtool_get_settings(netdev, &cmd))
ret = sprintf(buf, "%s\n",
cmd.duplex ? "full" : "half");
}
......
......@@ -530,33 +530,35 @@ static int prb_calc_retire_blk_tmo(struct packet_sock *po,
{
struct net_device *dev;
unsigned int mbits = 0, msec = 0, div = 0, tmo = 0;
struct ethtool_cmd ecmd;
int err;
dev = dev_get_by_index(sock_net(&po->sk), po->ifindex);
if (unlikely(dev == NULL))
rtnl_lock();
dev = __dev_get_by_index(sock_net(&po->sk), po->ifindex);
if (unlikely(!dev)) {
rtnl_unlock();
return DEFAULT_PRB_RETIRE_TOV;
if (dev->ethtool_ops && dev->ethtool_ops->get_settings) {
struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET, };
if (!dev->ethtool_ops->get_settings(dev, &ecmd)) {
switch (ecmd.speed) {
case SPEED_10000:
msec = 1;
div = 10000/1000;
break;
case SPEED_1000:
msec = 1;
div = 1000/1000;
break;
/*
* If the link speed is so slow you don't really
* need to worry about perf anyways
*/
case SPEED_100:
case SPEED_10:
default:
return DEFAULT_PRB_RETIRE_TOV;
}
}
err = __ethtool_get_settings(dev, &ecmd);
rtnl_unlock();
if (!err) {
switch (ecmd.speed) {
case SPEED_10000:
msec = 1;
div = 10000/1000;
break;
case SPEED_1000:
msec = 1;
div = 1000/1000;
break;
/*
* If the link speed is so slow you don't really
* need to worry about perf anyways
*/
case SPEED_100:
case SPEED_10:
default:
return DEFAULT_PRB_RETIRE_TOV;
}
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册