提交 4a85c7fa 编写于 作者: L Lee Jones 提交者: Arnd Bergmann

ARM: ux500: Add support for ab8500 regulators into the Device Tree

Here we supply the information required to setup regulators successfully
on Snowball and other db8500 variants which use the ab8500 regulators.
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
上级 bc367481
......@@ -308,6 +308,74 @@
compatible = "stericsson,ab8500";
reg = <5>; /* mailbox 5 is i2c */
interrupts = <0 40 0x4>;
ab8500-regulators {
compatible = "stericsson,ab8500-regulator";
// supplies to the display/camera
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2900000>;
regulator-boot-on;
/* BUG: If turned off MMC will be affected. */
regulator-always-on;
};
// supplies to the on-board eMMC
ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
regulator-name = "V-eMMC1";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <3300000>;
};
// supply for VAUX3; SDcard slots
ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
regulator-name = "V-MMC-SD";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <3300000>;
};
// supply for v-intcore12; VINTCORE12 LDO
ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
regulator-name = "V-INTCORE";
};
// supply for tvout; gpadc; TVOUT LDO
ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
regulator-name = "V-TVOUT";
};
// supply for ab8500-usb; USB LDO
ab8500_ldo_usb_reg: ab8500_ldo_usb {
regulator-name = "dummy";
};
// supply for ab8500-vaudio; VAUDIO LDO
ab8500_ldo_audio_reg: ab8500_ldo_audio {
regulator-name = "V-AUD";
};
// supply for v-anamic1 VAMic1-LDO
ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
regulator-name = "V-AMIC1";
};
// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
regulator-name = "V-AMIC2";
};
// supply for v-dmic; VDMIC LDO
ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
regulator-name = "V-DMIC";
};
// supply for U8500 CSI/DSI; VANA LDO
ab8500_ldo_ana_reg: ab8500_ldo_ana {
regulator-name = "V-CSI/DSI";
};
};
};
};
......
......@@ -103,11 +103,13 @@
sdi@80126000 {
status = "enabled";
vmmc-supply = <&ab8500_ldo_aux3_reg>;
cd-gpios = <&gpio6 26 0x4>; // 218
};
sdi@80114000 {
status = "enabled";
vmmc-supply = <&ab8500_ldo_aux2_reg>;
};
uart@80120000 {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册