提交 4a7f5db1 编写于 作者: A Amitkumar Karwar 提交者: John W. Linville

mwifiex: remove support for old chipsets W0/W1

For SD8787 A0/A1 chipsets we use the default firmware image
file 'mrvl/sd8787_uapsta.bin'. So the chip rev id variable
is removed.

The global variable fw_name is moved to adapter structure
so that we can support a different interface, such as PCIe,
in future.
Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com>
Signed-off-by: NBing Zhao <bzhao@marvell.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 0541ac4c
......@@ -35,8 +35,6 @@ static struct mwifiex_bss_attr mwifiex_bss_sta[] = {
static int drv_mode = DRV_MODE_STA;
static char fw_name[32] = DEFAULT_FW_NAME;
/* Supported drv_mode table */
static struct mwifiex_drv_mode mwifiex_drv_mode_tbl[] = {
{
......@@ -384,20 +382,8 @@ static int mwifiex_init_hw_fw(struct mwifiex_adapter *adapter)
memset(&fw, 0, sizeof(struct mwifiex_fw_image));
switch (adapter->revision_id) {
case SD8787_W0:
case SD8787_W1:
strcpy(fw_name, SD8787_W1_FW_NAME);
break;
case SD8787_A0:
case SD8787_A1:
strcpy(fw_name, SD8787_AX_FW_NAME);
break;
default:
break;
}
err = request_firmware(&adapter->firmware, fw_name, adapter->dev);
err = request_firmware(&adapter->firmware, adapter->fw_name,
adapter->dev);
if (err < 0) {
dev_err(adapter->dev, "request_firmware() returned"
" error code %#x\n", err);
......
......@@ -48,15 +48,6 @@ enum {
#define DRV_MODE_STA 0x1
#define SD8787_W0 0x30
#define SD8787_W1 0x31
#define SD8787_A0 0x40
#define SD8787_A1 0x41
#define DEFAULT_FW_NAME "mrvl/sd8787_uapsta.bin"
#define SD8787_W1_FW_NAME "mrvl/sd8787_uapsta_w1.bin"
#define SD8787_AX_FW_NAME "mrvl/sd8787_uapsta.bin"
struct mwifiex_drv_mode {
u16 drv_mode;
u16 intf_num;
......@@ -576,10 +567,10 @@ struct mwifiex_adapter {
u8 priv_num;
struct mwifiex_drv_mode *drv_mode;
const struct firmware *firmware;
char fw_name[32];
struct device *dev;
bool surprise_removed;
u32 fw_release_number;
u32 revision_id;
u16 init_wait_q_woken;
wait_queue_head_t init_wait_q;
void *card;
......
......@@ -1531,6 +1531,7 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
sdio_set_drvdata(func, card);
adapter->dev = &func->dev;
strcpy(adapter->fw_name, SD8787_DEFAULT_FW_NAME);
return 0;
......@@ -1552,7 +1553,6 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
* the first interrupt got from bootloader
* - Disable host interrupt mask register
* - Get SDIO port
* - Get revision ID
* - Initialize SDIO variables in card
* - Allocate MP registers
* - Allocate MPA Tx and Rx buffers
......@@ -1576,10 +1576,6 @@ static int mwifiex_init_sdio(struct mwifiex_adapter *adapter)
/* Get SDIO ioport */
mwifiex_init_sdio_ioport(adapter);
/* Get revision ID */
#define REV_ID_REG 0x5c
mwifiex_read_reg(adapter, REV_ID_REG, &adapter->revision_id);
/* Initialize SDIO variables in card */
card->mp_rd_bitmap = 0;
card->mp_wr_bitmap = 0;
......@@ -1751,4 +1747,4 @@ MODULE_AUTHOR("Marvell International Ltd.");
MODULE_DESCRIPTION("Marvell WiFi-Ex SDIO Driver version " SDIO_VERSION);
MODULE_VERSION(SDIO_VERSION);
MODULE_LICENSE("GPL v2");
MODULE_FIRMWARE("sd8787.bin");
MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
......@@ -28,6 +28,8 @@
#include "main.h"
#define SD8787_DEFAULT_FW_NAME "mrvl/sd8787_uapsta.bin"
#define BLOCK_MODE 1
#define BYTE_MODE 0
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册