[SCSI] qla2xxx: Further restrict ZIO mode support.

Only support ZIO mode 6 on specific ISP types.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

drivers/scsi/qla2xxx/qla_attr.c

@@ -507,9 +507,6 @@ qla2x00_zio_show(struct class_device *cdev, char *buf)
 	int len = 0;
 
 	switch (ha->zio_mode) {
-	case QLA_ZIO_MODE_5:
-		len += snprintf(buf + len, PAGE_SIZE-len, "Mode 5\n");
-		break;
 	case QLA_ZIO_MODE_6:
 		len += snprintf(buf + len, PAGE_SIZE-len, "Mode 6\n");
 		break;
@@ -527,20 +524,16 @@ qla2x00_zio_store(struct class_device *cdev, const char *buf, size_t count)
 	int val = 0;
 	uint16_t zio_mode;
 
+	if (!IS_ZIO_SUPPORTED(ha))
+		return -ENOTSUPP;
+
 	if (sscanf(buf, "%d", &val) != 1)
 		return -EINVAL;
 
-	switch (val) {
-	case 1:
-		zio_mode = QLA_ZIO_MODE_5;
-		break;
-	case 2:
+	if (val)
 		zio_mode = QLA_ZIO_MODE_6;
-		break;
-	default:
+	else
 		zio_mode = QLA_ZIO_DISABLED;
-		break;
-	}
 
 	/* Update per-hba values and queue a reset. */
 	if (zio_mode != QLA_ZIO_DISABLED || ha->zio_mode != QLA_ZIO_DISABLED) {

drivers/scsi/qla2xxx/qla_def.h

@@ -762,7 +762,6 @@ typedef struct {
 #define PD_STATE_WAIT_PORT_LOGOUT_ACK		11
 
 
-#define QLA_ZIO_MODE_5		(BIT_2 | BIT_0)
 #define QLA_ZIO_MODE_6		(BIT_2 | BIT_1)
 #define QLA_ZIO_DISABLED	0
 #define QLA_ZIO_DEFAULT_TIMER	2
@@ -2238,6 +2237,7 @@ typedef struct scsi_qla_host {
 #define DT_ISP5432			BIT_10
 #define DT_ISP_LAST			(DT_ISP5432 << 1)
 
+#define DT_ZIO_SUPPORTED		BIT_28
 #define DT_OEM_001			BIT_29
 #define DT_ISP2200A			BIT_30
 #define DT_EXTENDED_IDS			BIT_31
@@ -2260,6 +2260,7 @@ typedef struct scsi_qla_host {
 #define IS_QLA24XX(ha)	(IS_QLA2422(ha) || IS_QLA2432(ha))
 #define IS_QLA54XX(ha)	(IS_QLA5422(ha) || IS_QLA5432(ha))
 
+#define IS_ZIO_SUPPORTED(ha)	((ha)->device_type & DT_ZIO_SUPPORTED)
 #define IS_OEM_001(ha)		((ha)->device_type & DT_OEM_001)
 #define HAS_EXTENDED_IDS(ha)	((ha)->device_type & DT_EXTENDED_IDS)
 

drivers/scsi/qla2xxx/qla_init.c

@@ -1659,6 +1659,8 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
 		    ~(BIT_3 | BIT_2 | BIT_1 | BIT_0);
 		ha->flags.process_response_queue = 0;
 		if (ha->zio_mode != QLA_ZIO_DISABLED) {
+			ha->zio_mode = QLA_ZIO_MODE_6;
+
 			DEBUG2(printk("scsi(%ld): ZIO mode %d enabled; timer "
 			    "delay (%d us).\n", ha->host_no, ha->zio_mode,
 			    ha->zio_timer * 100));
@@ -3474,6 +3476,8 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
 	    ~(BIT_3 | BIT_2 | BIT_1 | BIT_0));
 	ha->flags.process_response_queue = 0;
 	if (ha->zio_mode != QLA_ZIO_DISABLED) {
+		ha->zio_mode = QLA_ZIO_MODE_6;
+
 		DEBUG2(printk("scsi(%ld): ZIO mode %d enabled; timer delay "
 		    "(%d us).\n", ha->host_no, ha->zio_mode,
 		    ha->zio_timer * 100));

drivers/scsi/qla2xxx/qla_os.c

@@ -1161,12 +1161,15 @@ qla2x00_set_isp_flags(scsi_qla_host_t *ha)
 		break;
 	case PCI_DEVICE_ID_QLOGIC_ISP2300:
 		ha->device_type |= DT_ISP2300;
+		ha->device_type |= DT_ZIO_SUPPORTED;
 		break;
 	case PCI_DEVICE_ID_QLOGIC_ISP2312:
 		ha->device_type |= DT_ISP2312;
+		ha->device_type |= DT_ZIO_SUPPORTED;
 		break;
 	case PCI_DEVICE_ID_QLOGIC_ISP2322:
 		ha->device_type |= DT_ISP2322;
+		ha->device_type |= DT_ZIO_SUPPORTED;
 		if (ha->pdev->subsystem_vendor == 0x1028 &&
 		    ha->pdev->subsystem_device == 0x0170)
 			ha->device_type |= DT_OEM_001;
@@ -1179,9 +1182,11 @@ qla2x00_set_isp_flags(scsi_qla_host_t *ha)
 		break;
 	case PCI_DEVICE_ID_QLOGIC_ISP2422:
 		ha->device_type |= DT_ISP2422;
+		ha->device_type |= DT_ZIO_SUPPORTED;
 		break;
 	case PCI_DEVICE_ID_QLOGIC_ISP2432:
 		ha->device_type |= DT_ISP2432;
+		ha->device_type |= DT_ZIO_SUPPORTED;
 		break;
 	case PCI_DEVICE_ID_QLOGIC_ISP5422:
 		ha->device_type |= DT_ISP5422;