提交 4a086e4c 编写于 作者: M Mark Brown

ASoC: wm8996: Switch to using common code for managing CPVDD supply

Nice code saving.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 177f72fd
......@@ -73,7 +73,6 @@ struct wm8996_priv {
struct regulator_bulk_data supplies[WM8996_NUM_SUPPLIES];
struct notifier_block disable_nb[WM8996_NUM_SUPPLIES];
struct regulator *cpvdd;
int bg_ena;
struct wm8996_pdata pdata;
......@@ -793,29 +792,18 @@ static int bg_event(struct snd_soc_dapm_widget *w,
static int cp_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec);
int ret = 0;
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
ret = regulator_enable(wm8996->cpvdd);
if (ret != 0)
dev_err(codec->dev, "Failed to enable CPVDD: %d\n",
ret);
break;
case SND_SOC_DAPM_POST_PMU:
msleep(5);
break;
case SND_SOC_DAPM_POST_PMD:
regulator_disable_deferred(wm8996->cpvdd, 20);
break;
default:
BUG();
ret = -EINVAL;
}
return ret;
return 0;
}
static int rmv_short_event(struct snd_soc_dapm_widget *w,
......@@ -1117,12 +1105,12 @@ SND_SOC_DAPM_INPUT("IN2RP"),
SND_SOC_DAPM_INPUT("DMIC1DAT"),
SND_SOC_DAPM_INPUT("DMIC2DAT"),
SND_SOC_DAPM_REGULATOR_SUPPLY("CPVDD", 20),
SND_SOC_DAPM_SUPPLY_S("SYSCLK", 1, WM8996_AIF_CLOCKING_1, 0, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("SYSDSPCLK", 2, WM8996_CLOCKING_1, 1, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("AIFCLK", 2, WM8996_CLOCKING_1, 2, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("Charge Pump", 2, WM8996_CHARGE_PUMP_1, 15, 0, cp_event,
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_SUPPLY("Bandgap", SND_SOC_NOPM, 0, 0, bg_event,
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_SUPPLY("LDO2", WM8996_POWER_MANAGEMENT_2, 1, 0, NULL, 0),
......@@ -1281,6 +1269,7 @@ static const struct snd_soc_dapm_route wm8996_dapm_routes[] = {
{ "AIFCLK", NULL, "SYSCLK" },
{ "SYSDSPCLK", NULL, "SYSCLK" },
{ "Charge Pump", NULL, "SYSCLK" },
{ "Charge Pump", NULL, "CPVDD" },
{ "MICB1", NULL, "LDO2" },
{ "MICB1", NULL, "MICB1 Audio" },
......@@ -3049,7 +3038,6 @@ static int wm8996_remove(struct snd_soc_codec *codec)
for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++)
regulator_unregister_notifier(wm8996->supplies[i].consumer,
&wm8996->disable_nb[i]);
regulator_put(wm8996->cpvdd);
regulator_bulk_free(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
return 0;
......@@ -3172,18 +3160,11 @@ static __devinit int wm8996_i2c_probe(struct i2c_client *i2c,
goto err_gpio;
}
wm8996->cpvdd = regulator_get(&i2c->dev, "CPVDD");
if (IS_ERR(wm8996->cpvdd)) {
ret = PTR_ERR(wm8996->cpvdd);
dev_err(&i2c->dev, "Failed to get CPVDD: %d\n", ret);
goto err_get;
}
ret = regulator_bulk_enable(ARRAY_SIZE(wm8996->supplies),
wm8996->supplies);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
goto err_cpvdd;
goto err_get;
}
if (wm8996->pdata.ldo_ena > 0) {
......@@ -3245,8 +3226,6 @@ static __devinit int wm8996_i2c_probe(struct i2c_client *i2c,
if (wm8996->pdata.ldo_ena > 0)
gpio_set_value_cansleep(wm8996->pdata.ldo_ena, 0);
regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
err_cpvdd:
regulator_put(wm8996->cpvdd);
err_get:
regulator_bulk_free(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
err_gpio:
......@@ -3263,7 +3242,6 @@ static __devexit int wm8996_i2c_remove(struct i2c_client *client)
snd_soc_unregister_codec(&client->dev);
wm8996_free_gpio(wm8996);
regulator_put(wm8996->cpvdd);
regulator_bulk_free(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
regmap_exit(wm8996->regmap);
if (wm8996->pdata.ldo_ena > 0) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册