[SCSI] qla2xxx: Add input/output byte-count statistics.

Currently Firmware does not have counters for input megabytes and
output megabytes, therefore driver counts these values depending
on the status of the scsi command and direction of the command.
The values are exported in the FC_HOST path.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

drivers/scsi/qla2xxx/qla_attr.c

@@ -1065,6 +1065,8 @@ qla2x00_get_fc_host_stats(struct Scsi_Host *shost)
 		pfc_host_stat->dumped_frames = stats->dumped_frames;
 		pfc_host_stat->nos_count = stats->nos_rcvd;
 	}
+	pfc_host_stat->fcp_input_megabytes = ha->qla_stats.input_bytes >> 20;
+	pfc_host_stat->fcp_output_megabytes = ha->qla_stats.output_bytes >> 20;
 
 done_free:
         dma_pool_free(ha->s_dma_pool, stats, stats_dma);

drivers/scsi/qla2xxx/qla_def.h

@@ -2156,6 +2156,8 @@ struct qla_chip_state_84xx {
 
 struct qla_statistics {
 	uint32_t total_isp_aborts;
+	uint64_t input_bytes;
+	uint64_t output_bytes;
 };
 
 /*

drivers/scsi/qla2xxx/qla_iocb.c

@@ -21,17 +21,22 @@ static void qla2x00_isp_cmd(scsi_qla_host_t *ha);
  * Returns the proper CF_* direction based on CDB.
  */
 static inline uint16_t
-qla2x00_get_cmd_direction(struct scsi_cmnd *cmd)
+qla2x00_get_cmd_direction(srb_t *sp)
 {
 	uint16_t cflags;
 
 	cflags = 0;
 
 	/* Set transfer direction */
-	if (cmd->sc_data_direction == DMA_TO_DEVICE)
+	if (sp->cmd->sc_data_direction == DMA_TO_DEVICE) {
 		cflags = CF_WRITE;
-	else if (cmd->sc_data_direction == DMA_FROM_DEVICE)
+		sp->fcport->ha->qla_stats.output_bytes +=
+		    scsi_bufflen(sp->cmd);
+	} else if (sp->cmd->sc_data_direction == DMA_FROM_DEVICE) {
 		cflags = CF_READ;
+		sp->fcport->ha->qla_stats.input_bytes +=
+		    scsi_bufflen(sp->cmd);
+	}
 	return (cflags);
 }
 
@@ -169,7 +174,7 @@ void qla2x00_build_scsi_iocbs_32(srb_t *sp, cmd_entry_t *cmd_pkt,
 
 	ha = sp->ha;
 
-	cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(cmd));
+	cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(sp));
 
 	/* Three DSDs are available in the Command Type 2 IOCB */
 	avail_dsds = 3;
@@ -228,7 +233,7 @@ void qla2x00_build_scsi_iocbs_64(srb_t *sp, cmd_entry_t *cmd_pkt,
 
 	ha = sp->ha;
 
-	cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(cmd));
+	cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(sp));
 
 	/* Two DSDs are available in the Command Type 3 IOCB */
 	avail_dsds = 2;
@@ -625,12 +630,17 @@ qla24xx_build_scsi_iocbs(srb_t *sp, struct cmd_type_7 *cmd_pkt,
 	ha = sp->ha;
 
 	/* Set transfer direction */
-	if (cmd->sc_data_direction == DMA_TO_DEVICE)
+	if (cmd->sc_data_direction == DMA_TO_DEVICE) {
 		cmd_pkt->task_mgmt_flags =
 		    __constant_cpu_to_le16(TMF_WRITE_DATA);
-	else if (cmd->sc_data_direction == DMA_FROM_DEVICE)
+		sp->fcport->ha->qla_stats.output_bytes +=
+		    scsi_bufflen(sp->cmd);
+	} else if (cmd->sc_data_direction == DMA_FROM_DEVICE) {
 		cmd_pkt->task_mgmt_flags =
 		    __constant_cpu_to_le16(TMF_READ_DATA);
+		sp->fcport->ha->qla_stats.input_bytes +=
+		    scsi_bufflen(sp->cmd);
+	}
 
 	/* One DSD is available in the Command Type 3 IOCB */
 	avail_dsds = 1;