提交 49b7a491 编写于 作者: K Kukjin Kim

ARM: S5P64X0: Update Kconfig and Makefile

This patch updates the Kconfig and Makefile for the S5P6440 and S5P6450
machines. It also updates arch/arm/ Kconfig and Makefile to include for
support ARCH_S5P64X0 with one kernel image.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
上级 19a2c065
......@@ -678,8 +678,8 @@ config ARCH_S3C64XX
help
Samsung S3C64XX series based systems
config ARCH_S5P6440
bool "Samsung S5P6440"
config ARCH_S5P64X0
bool "Samsung S5P6440 S5P6450"
select CPU_V6
select GENERIC_GPIO
select HAVE_CLK
......@@ -688,7 +688,8 @@ config ARCH_S5P6440
select HAVE_S3C2410_I2C
select HAVE_S3C_RTC
help
Samsung S5P6440 CPU based systems
Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
SMDK6450.
config ARCH_S5P6442
bool "Samsung S5P6442"
......@@ -928,7 +929,7 @@ if ARCH_S3C64XX
source "arch/arm/mach-s3c64xx/Kconfig"
endif
source "arch/arm/mach-s5p6440/Kconfig"
source "arch/arm/mach-s5p64x0/Kconfig"
source "arch/arm/mach-s5p6442/Kconfig"
......@@ -1271,7 +1272,7 @@ source kernel/Kconfig.preempt
config HZ
int
default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || \
default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
default AT91_TIMER_HZ if ARCH_AT91
......
......@@ -173,7 +173,7 @@ machine-$(CONFIG_ARCH_RPC) := rpc
machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443
machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
machine-$(CONFIG_ARCH_S5P6440) := s5p6440
machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0
machine-$(CONFIG_ARCH_S5P6442) := s5p6442
machine-$(CONFIG_ARCH_S5PC100) := s5pc100
machine-$(CONFIG_ARCH_S5PV210) := s5pv210
......
# arch/arm/mach-s5p6440/Kconfig
# arch/arm/mach-s5p64x0/Kconfig
#
# Copyright (c) 2009 Samsung Electronics Co., Ltd.
# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
# http://www.samsung.com/
#
# Licensed under GPLv2
if ARCH_S5P6440
if ARCH_S5P64X0
config CPU_S5P6440
bool
select PLAT_S5P
select S3C_PL330_DMA
help
Enable S5P6440 CPU support
config S5P6440_SETUP_I2C1
config CPU_S5P6450
bool
select PLAT_S5P
select S3C_PL330_DMA
help
Enable S5P6450 CPU support
config S5P64X0_SETUP_I2C1
bool
help
Common setup code for i2c bus 1.
# machine support
config MACH_SMDK6440
bool "SMDK6440"
select CPU_S5P6440
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_WDT
select S3C64XX_DEV_SPI
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_TS
select S5P6440_SETUP_I2C1
select S5P64X0_SETUP_I2C1
help
Machine support for the Samsung SMDK6440
config MACH_SMDK6450
bool "SMDK6450"
select CPU_S5P6450
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_WDT
select S3C64XX_DEV_SPI
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_TS
select S5P64X0_SETUP_I2C1
help
Machine support for the Samsung SMDK6450
endif
# arch/arm/mach-s5p6440/Makefile
# arch/arm/mach-s5p64x0/Makefile
#
# Copyright (c) 2009 Samsung Electronics Co., Ltd.
# http://www.samsung.com/
# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
# http://www.samsung.com
#
# Licensed under GPLv2
......@@ -10,16 +10,21 @@ obj-m :=
obj-n :=
obj- :=
# Core support for S5P6440 system
# Core support for S5P64X0 system
obj-$(CONFIG_CPU_S5P6440) += cpu.o init.o clock.o gpio.o dma.o
obj-$(CONFIG_CPU_S5P6440) += setup-i2c0.o
obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o
obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o
obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o gpio.o
obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o
# machine support
obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o
obj-$(CONFIG_MACH_SMDK6450) += mach-smdk6450.o
# device support
obj-y += dev-audio.o
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
obj-$(CONFIG_S5P6440_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S5P64X0_SETUP_I2C1) += setup-i2c1.o
......@@ -7,7 +7,7 @@
config PLAT_S5P
bool
depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310)
depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310)
default y
select ARM_VIC if !ARCH_S5PV310
select ARM_GIC if ARCH_S5PV310
......@@ -30,7 +30,7 @@ config S5P_EXT_INT
bool
help
Use the external interrupts (other than GPIO interrupts.)
Note: Do not choose this for S5P6440.
Note: Do not choose this for S5P6440 and S5P6450.
config S5P_DEV_FIMC0
bool
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册