ARM: dts: Add stdout-path property to i.MX boards

This adds the stdout-path property to various i.MX boards. Values
of the property have been taken from barebox, so they should be
correct. Also, the older linux,stdout-path property is converted
to stdout-path.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

arch/arm/boot/dts/imx25-karo-tx25.dts

@@ -16,6 +16,10 @@
 	model = "Ka-Ro TX25";
 	compatible = "karo,imx25-tx25", "fsl,imx25";
 
+	chosen {
+		stdout-path = &uart1;
+	};
+
 	memory {
 		reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
 	};

arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts

@@ -15,6 +15,10 @@
 	model = "Phytec pca100 rapid development kit";
 	compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27";
 
+	chosen {
+		stdout-path = &uart1;
+	};
+
 	display: display {
 		model = "Primeview-PD050VL1";
 		native-mode = <&timing0>;

arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts

@@ -13,6 +13,10 @@
 	model = "Phytec pcm970";
 	compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27";
 
+	chosen {
+		stdout-path = &uart1;
+	};
+
 	display0: LQ035Q7 {
 		model = "Sharp-LQ035Q7";
 		native-mode = <&timing0>;

arch/arm/boot/dts/imx51-babbage.dts

@@ -17,6 +17,10 @@
 	model = "Freescale i.MX51 Babbage Board";
 	compatible = "fsl,imx51-babbage", "fsl,imx51";
 
+	chosen {
+		stdout-path = &uart1;
+	};
+
 	memory {
 		reg = <0x90000000 0x20000000>;
 	};

arch/arm/boot/dts/imx53-mba53.dts

@@ -17,6 +17,10 @@
 	model = "TQ MBa53 starter kit";
 	compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
 
+	chosen {
+		stdout-path = &uart2;
+	};
+
 	backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm2 0 50000>;

arch/arm/boot/dts/imx53-qsb-common.dtsi

@@ -13,6 +13,10 @@
 #include "imx53.dtsi"
 
 / {
+	chosen {
+		stdout-path = &uart1;
+	};
+
 	memory {
 		reg = <0x70000000 0x20000000>,
 		      <0xb0000000 0x20000000>;

arch/arm/boot/dts/imx6dl-hummingboard.dts

@@ -11,6 +11,10 @@
 	model = "SolidRun HummingBoard DL/Solo";
 	compatible = "solidrun,hummingboard", "fsl,imx6dl";
 
+	chosen {
+		stdout-path = &uart1;
+	};
+
 	ir_recv: ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio1 2 1>;

arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts

@@ -18,6 +18,10 @@
 	model = "Data Modul eDM-QMX6 Board";
 	compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
 
+	chosen {
+		stdout-path = &uart2;
+	};
+
 	aliases {
 		gpio7 = &stmpe_gpio1;
 		gpio8 = &stmpe_gpio2;

arch/arm/boot/dts/imx6q-gk802.dts

@@ -14,7 +14,7 @@
 	compatible = "zealz,imx6q-gk802", "fsl,imx6q";
 
 	chosen {
-		linux,stdout-path = &uart4;
+		stdout-path = &uart4;
 	};
 
 	memory {

arch/arm/boot/dts/imx6q-phytec-pbab01.dts

@@ -16,6 +16,10 @@
 / {
 	model = "Phytec phyFLEX-i.MX6 Quad Carrier-Board";
 	compatible = "phytec,imx6q-pbab01", "phytec,imx6q-pfla02", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart4;
+	};
 };
 
 &sata {

arch/arm/boot/dts/imx6q-udoo.dts

@@ -16,6 +16,10 @@
 	model = "Udoo i.MX6 Quad Board";
 	compatible = "udoo,imx6q-udoo", "fsl,imx6q";
 
+	chosen {
+		stdout-path = &uart2;
+	};
+
 	memory {
 		reg = <0x10000000 0x40000000>;
 	};

arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi

@@ -22,7 +22,7 @@
 	};
 
 	chosen {
-		linux,stdout-path = &uart1;
+		stdout-path = &uart1;
 	};
 };
 

arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi

@@ -14,6 +14,10 @@
 #include <dt-bindings/input/input.h>
 
 / {
+	chosen {
+		stdout-path = &uart2;
+	};
+
 	memory {
 		reg = <0x10000000 0x40000000>;
 	};

arch/arm/boot/dts/imx6qdl-sabrelite.dtsi

@@ -13,6 +13,10 @@
 #include <dt-bindings/input/input.h>
 
 / {
+	chosen {
+		stdout-path = &uart2;
+	};
+
 	memory {
 		reg = <0x10000000 0x40000000>;
 	};

arch/arm/boot/dts/imx6qdl-sabresd.dtsi

@@ -14,6 +14,10 @@
 #include <dt-bindings/input/input.h>
 
 / {
+	chosen {
+		stdout-path = &uart1;
+	};
+
 	memory {
 		reg = <0x10000000 0x40000000>;
 	};