提交 48c02fde 编写于 作者: A andrew.vasquez@qlogic.com 提交者: James Bottomley

[SCSI] qla2xxx: Consolidate ISP63xx handling.

As new 23xx firmware will accomidate ISP63xx types.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
上级 044cc6c8
......@@ -10,14 +10,13 @@ config SCSI_QLA_FC
By default, firmware for the ISP parts will be loaded
via the Firmware Loader interface.
ISP Firmware Filename
---------- -----------------
21xx ql2100_fw.bin
22xx ql2200_fw.bin
2300, 2312 ql2300_fw.bin
2322 ql2322_fw.bin
6312, 6322 ql6312_fw.bin
24xx ql2400_fw.bin
ISP Firmware Filename
---------- -----------------
21xx ql2100_fw.bin
22xx ql2200_fw.bin
2300, 2312, 6312 ql2300_fw.bin
2322, 6322 ql2322_fw.bin
24xx ql2400_fw.bin
Upon request, the driver caches the firmware image until
the driver is unloaded.
......@@ -51,23 +50,17 @@ config SCSI_QLA22XX
This driver supports the QLogic 22xx (ISP2200) host adapter family.
config SCSI_QLA2300
tristate " Build QLogic ISP2300 firmware-module"
tristate " Build QLogic ISP2300/ISP6312 firmware-module"
depends on SCSI_QLA_FC && SCSI_QLA2XXX_EMBEDDED_FIRMWARE
---help---
This driver supports the QLogic 2300 (ISP2300 and ISP2312) host
adapter family.
This driver supports the QLogic 2300 (ISP2300, ISP2312 and
ISP6312) host adapter family.
config SCSI_QLA2322
tristate " Build QLogic ISP2322 firmware-module"
depends on SCSI_QLA_FC && SCSI_QLA2XXX_EMBEDDED_FIRMWARE
---help---
This driver supports the QLogic 2322 (ISP2322) host adapter family.
config SCSI_QLA6312
tristate " Build QLogic ISP63xx firmware-module"
tristate " Build QLogic ISP2322/ISP6322 firmware-module"
depends on SCSI_QLA_FC && SCSI_QLA2XXX_EMBEDDED_FIRMWARE
---help---
This driver supports the QLogic 63xx (ISP6312 and ISP6322) host
This driver supports the QLogic 2322 (ISP2322 and ISP6322) host
adapter family.
config SCSI_QLA24XX
......
......@@ -9,12 +9,10 @@ qla2100-y := ql2100.o ql2100_fw.o
qla2200-y := ql2200.o ql2200_fw.o
qla2300-y := ql2300.o ql2300_fw.o
qla2322-y := ql2322.o ql2322_fw.o
qla6312-y := ql6312.o ql6312_fw.o
qla2400-y := ql2400.o ql2400_fw.o
obj-$(CONFIG_SCSI_QLA21XX) += qla2xxx.o qla2100.o
obj-$(CONFIG_SCSI_QLA22XX) += qla2xxx.o qla2200.o
obj-$(CONFIG_SCSI_QLA2300) += qla2xxx.o qla2300.o
obj-$(CONFIG_SCSI_QLA2322) += qla2xxx.o qla2322.o
obj-$(CONFIG_SCSI_QLA6312) += qla2xxx.o qla6312.o
obj-$(CONFIG_SCSI_QLA24XX) += qla2xxx.o qla2400.o
......@@ -40,6 +40,11 @@ static struct qla_board_info qla_board_tbl[] = {
.isp_name = "ISP2312",
.fw_info = qla_fw_tbl,
},
{
.drv_name = qla_driver_name,
.isp_name = "ISP6312",
.fw_info = qla_fw_tbl,
},
};
static struct pci_device_id qla2300_pci_tbl[] = {
......@@ -57,6 +62,13 @@ static struct pci_device_id qla2300_pci_tbl[] = {
.subdevice = PCI_ANY_ID,
.driver_data = (unsigned long)&qla_board_tbl[1],
},
{
.vendor = PCI_VENDOR_ID_QLOGIC,
.device = PCI_DEVICE_ID_QLOGIC_ISP6312,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.driver_data = (unsigned long)&qla_board_tbl[2],
},
{0, 0},
};
MODULE_DEVICE_TABLE(pci, qla2300_pci_tbl);
......
......@@ -52,6 +52,11 @@ static struct qla_board_info qla_board_tbl[] = {
.isp_name = "ISP2322",
.fw_info = qla_fw_tbl,
},
{
.drv_name = qla_driver_name,
.isp_name = "ISP6322",
.fw_info = qla_fw_tbl,
},
};
static struct pci_device_id qla2322_pci_tbl[] = {
......@@ -62,6 +67,13 @@ static struct pci_device_id qla2322_pci_tbl[] = {
.subdevice = PCI_ANY_ID,
.driver_data = (unsigned long)&qla_board_tbl[0],
},
{
.vendor = PCI_VENDOR_ID_QLOGIC,
.device = PCI_DEVICE_ID_QLOGIC_ISP6322,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.driver_data = (unsigned long)&qla_board_tbl[1],
},
{0, 0},
};
MODULE_DEVICE_TABLE(pci, qla2322_pci_tbl);
......
......@@ -1003,6 +1003,10 @@ qla2x00_update_fw_options(scsi_qla_host_t *ha)
if (ha->flags.enable_led_scheme)
ha->fw_options[2] |= BIT_12;
/* Detect ISP6312. */
if (IS_QLA6312(ha))
ha->fw_options[2] |= BIT_13;
/* Update firmware options. */
qla2x00_set_fw_options(ha, ha->fw_options);
}
......
......@@ -2596,13 +2596,12 @@ qla2x00_down_timeout(struct semaphore *sema, unsigned long timeout)
/* Firmware interface routines. */
#define FW_BLOBS 6
#define FW_BLOBS 5
#define FW_ISP21XX 0
#define FW_ISP22XX 1
#define FW_ISP2300 2
#define FW_ISP2322 3
#define FW_ISP63XX 4
#define FW_ISP24XX 5
#define FW_ISP24XX 4
static DECLARE_MUTEX(qla_fw_lock);
......@@ -2611,7 +2610,6 @@ static struct fw_blob qla_fw_blobs[FW_BLOBS] = {
{ .name = "ql2200_fw.bin", .segs = { 0x1000, 0 }, },
{ .name = "ql2300_fw.bin", .segs = { 0x800, 0 }, },
{ .name = "ql2322_fw.bin", .segs = { 0x800, 0x1c000, 0x1e000, 0 }, },
{ .name = "ql6312_fw.bin", .segs = { 0x800, 0 }, },
{ .name = "ql2400_fw.bin", },
};
......@@ -2625,12 +2623,10 @@ qla2x00_request_firmware(scsi_qla_host_t *ha)
blob = &qla_fw_blobs[FW_ISP21XX];
} else if (IS_QLA2200(ha)) {
blob = &qla_fw_blobs[FW_ISP22XX];
} else if (IS_QLA2300(ha) || IS_QLA2312(ha)) {
} else if (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA6312(ha)) {
blob = &qla_fw_blobs[FW_ISP2300];
} else if (IS_QLA2322(ha)) {
} else if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
blob = &qla_fw_blobs[FW_ISP2322];
} else if (IS_QLA6312(ha) || IS_QLA6322(ha)) {
blob = &qla_fw_blobs[FW_ISP63XX];
} else if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
blob = &qla_fw_blobs[FW_ISP24XX];
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册