提交 48ace4ef 编写于 作者: A Andrew Lunn 提交者: David S. Miller

dsa: mv88e6xxx: Kill the REG_READ and REG_WRITE macros

These macros hide a ds variable and a return statement on error, which
can lead to locking issues. Kill them off.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 756ca874
......@@ -52,7 +52,9 @@ static int mv88e6123_setup_global(struct dsa_switch *ds)
* external PHYs to poll), don't discard packets with
* excessive collisions, and mask all interrupt sources.
*/
REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, 0x0000);
ret = mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_CONTROL, 0x0000);
if (ret)
return ret;
/* Configure the upstream port, and configure the upstream
* port as the port to which ingress and egress monitor frames
......@@ -61,14 +63,15 @@ static int mv88e6123_setup_global(struct dsa_switch *ds)
reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT |
upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT |
upstream_port << GLOBAL_MONITOR_CONTROL_ARP_SHIFT;
REG_WRITE(REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
ret = mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
if (ret)
return ret;
/* Disable remote management for now, and set the switch's
* DSA device number.
*/
REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL_2, ds->index & 0x1f);
return 0;
return mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_CONTROL_2,
ds->index & 0x1f);
}
static int mv88e6123_setup(struct dsa_switch *ds)
......
......@@ -49,11 +49,16 @@ static int mv88e6131_setup_global(struct dsa_switch *ds)
* to arbitrate between packet queues, set the maximum frame
* size to 1632, and mask all interrupt sources.
*/
REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL,
GLOBAL_CONTROL_PPU_ENABLE | GLOBAL_CONTROL_MAX_FRAME_1632);
ret = mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_CONTROL,
GLOBAL_CONTROL_PPU_ENABLE |
GLOBAL_CONTROL_MAX_FRAME_1632);
if (ret)
return ret;
/* Set the VLAN ethertype to 0x8100. */
REG_WRITE(REG_GLOBAL, GLOBAL_CORE_TAG_TYPE, 0x8100);
ret = mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_CORE_TAG_TYPE, 0x8100);
if (ret)
return ret;
/* Disable ARP mirroring, and configure the upstream port as
* the port to which ingress and egress monitor frames are to
......@@ -62,31 +67,33 @@ static int mv88e6131_setup_global(struct dsa_switch *ds)
reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT |
upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT |
GLOBAL_MONITOR_CONTROL_ARP_DISABLED;
REG_WRITE(REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
ret = mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
if (ret)
return ret;
/* Disable cascade port functionality unless this device
* is used in a cascade configuration, and set the switch's
* DSA device number.
*/
if (ds->dst->pd->nr_chips > 1)
REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL_2,
GLOBAL_CONTROL_2_MULTIPLE_CASCADE |
(ds->index & 0x1f));
ret = mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_CONTROL_2,
GLOBAL_CONTROL_2_MULTIPLE_CASCADE |
(ds->index & 0x1f));
else
REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL_2,
GLOBAL_CONTROL_2_NO_CASCADE |
(ds->index & 0x1f));
ret = mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_CONTROL_2,
GLOBAL_CONTROL_2_NO_CASCADE |
(ds->index & 0x1f));
if (ret)
return ret;
/* Force the priority of IGMP/MLD snoop frames and ARP frames
* to the highest setting.
*/
REG_WRITE(REG_GLOBAL2, GLOBAL2_PRIO_OVERRIDE,
GLOBAL2_PRIO_OVERRIDE_FORCE_SNOOP |
7 << GLOBAL2_PRIO_OVERRIDE_SNOOP_SHIFT |
GLOBAL2_PRIO_OVERRIDE_FORCE_ARP |
7 << GLOBAL2_PRIO_OVERRIDE_ARP_SHIFT);
return 0;
return mv88e6xxx_reg_write(ds, REG_GLOBAL2, GLOBAL2_PRIO_OVERRIDE,
GLOBAL2_PRIO_OVERRIDE_FORCE_SNOOP |
7 << GLOBAL2_PRIO_OVERRIDE_SNOOP_SHIFT |
GLOBAL2_PRIO_OVERRIDE_FORCE_ARP |
7 << GLOBAL2_PRIO_OVERRIDE_ARP_SHIFT);
}
static int mv88e6131_setup(struct dsa_switch *ds)
......
......@@ -46,8 +46,11 @@ static int mv88e6171_setup_global(struct dsa_switch *ds)
/* Discard packets with excessive collisions, mask all
* interrupt sources, enable PPU.
*/
REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL,
GLOBAL_CONTROL_PPU_ENABLE | GLOBAL_CONTROL_DISCARD_EXCESS);
ret = mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_CONTROL,
GLOBAL_CONTROL_PPU_ENABLE |
GLOBAL_CONTROL_DISCARD_EXCESS);
if (ret)
return ret;
/* Configure the upstream port, and configure the upstream
* port as the port to which ingress and egress monitor frames
......@@ -57,14 +60,15 @@ static int mv88e6171_setup_global(struct dsa_switch *ds)
upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT |
upstream_port << GLOBAL_MONITOR_CONTROL_ARP_SHIFT |
upstream_port << GLOBAL_MONITOR_CONTROL_MIRROR_SHIFT;
REG_WRITE(REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
ret = mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
if (ret)
return ret;
/* Disable remote management for now, and set the switch's
* DSA device number.
*/
REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL_2, ds->index & 0x1f);
return 0;
return mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_CONTROL_2,
ds->index & 0x1f);
}
static int mv88e6171_setup(struct dsa_switch *ds)
......
......@@ -59,8 +59,11 @@ static int mv88e6352_setup_global(struct dsa_switch *ds)
/* Discard packets with excessive collisions,
* mask all interrupt sources, enable PPU (bit 14, undocumented).
*/
REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL,
GLOBAL_CONTROL_PPU_ENABLE | GLOBAL_CONTROL_DISCARD_EXCESS);
ret = mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_CONTROL,
GLOBAL_CONTROL_PPU_ENABLE |
GLOBAL_CONTROL_DISCARD_EXCESS);
if (ret)
return ret;
/* Configure the upstream port, and configure the upstream
* port as the port to which ingress and egress monitor frames
......@@ -69,14 +72,14 @@ static int mv88e6352_setup_global(struct dsa_switch *ds)
reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT |
upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT |
upstream_port << GLOBAL_MONITOR_CONTROL_ARP_SHIFT;
REG_WRITE(REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
ret = mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
if (ret)
return ret;
/* Disable remote management for now, and set the switch's
* DSA device number.
*/
REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f);
return 0;
return mv88e6xxx_reg_write(ds, REG_GLOBAL, 0x1c, ds->index & 0x1f);
}
static int mv88e6352_setup(struct dsa_switch *ds)
......
......@@ -180,28 +180,44 @@ int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
int mv88e6xxx_set_addr_direct(struct dsa_switch *ds, u8 *addr)
{
REG_WRITE(REG_GLOBAL, GLOBAL_MAC_01, (addr[0] << 8) | addr[1]);
REG_WRITE(REG_GLOBAL, GLOBAL_MAC_23, (addr[2] << 8) | addr[3]);
REG_WRITE(REG_GLOBAL, GLOBAL_MAC_45, (addr[4] << 8) | addr[5]);
int err;
return 0;
err = mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_MAC_01,
(addr[0] << 8) | addr[1]);
if (err)
return err;
err = mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_MAC_23,
(addr[2] << 8) | addr[3]);
if (err)
return err;
return mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_MAC_45,
(addr[4] << 8) | addr[5]);
}
int mv88e6xxx_set_addr_indirect(struct dsa_switch *ds, u8 *addr)
{
int i;
int ret;
int i;
for (i = 0; i < 6; i++) {
int j;
/* Write the MAC address byte. */
REG_WRITE(REG_GLOBAL2, GLOBAL2_SWITCH_MAC,
GLOBAL2_SWITCH_MAC_BUSY | (i << 8) | addr[i]);
ret = mv88e6xxx_reg_write(ds, REG_GLOBAL2, GLOBAL2_SWITCH_MAC,
GLOBAL2_SWITCH_MAC_BUSY |
(i << 8) | addr[i]);
if (ret)
return ret;
/* Wait for the write to complete. */
for (j = 0; j < 16; j++) {
ret = REG_READ(REG_GLOBAL2, GLOBAL2_SWITCH_MAC);
ret = mv88e6xxx_reg_read(ds, REG_GLOBAL2,
GLOBAL2_SWITCH_MAC);
if (ret < 0)
return ret;
if ((ret & GLOBAL2_SWITCH_MAC_BUSY) == 0)
break;
}
......@@ -233,13 +249,21 @@ static int mv88e6xxx_ppu_disable(struct dsa_switch *ds)
int ret;
unsigned long timeout;
ret = REG_READ(REG_GLOBAL, GLOBAL_CONTROL);
REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL,
ret & ~GLOBAL_CONTROL_PPU_ENABLE);
ret = mv88e6xxx_reg_read(ds, REG_GLOBAL, GLOBAL_CONTROL);
if (ret < 0)
return ret;
ret = mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_CONTROL,
ret & ~GLOBAL_CONTROL_PPU_ENABLE);
if (ret)
return ret;
timeout = jiffies + 1 * HZ;
while (time_before(jiffies, timeout)) {
ret = REG_READ(REG_GLOBAL, GLOBAL_STATUS);
ret = mv88e6xxx_reg_read(ds, REG_GLOBAL, GLOBAL_STATUS);
if (ret < 0)
return ret;
usleep_range(1000, 2000);
if ((ret & GLOBAL_STATUS_PPU_MASK) !=
GLOBAL_STATUS_PPU_POLLING)
......@@ -251,15 +275,24 @@ static int mv88e6xxx_ppu_disable(struct dsa_switch *ds)
static int mv88e6xxx_ppu_enable(struct dsa_switch *ds)
{
int ret;
int ret, err;
unsigned long timeout;
ret = REG_READ(REG_GLOBAL, GLOBAL_CONTROL);
REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, ret | GLOBAL_CONTROL_PPU_ENABLE);
ret = mv88e6xxx_reg_read(ds, REG_GLOBAL, GLOBAL_CONTROL);
if (ret < 0)
return ret;
err = mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_CONTROL,
ret | GLOBAL_CONTROL_PPU_ENABLE);
if (err)
return err;
timeout = jiffies + 1 * HZ;
while (time_before(jiffies, timeout)) {
ret = REG_READ(REG_GLOBAL, GLOBAL_STATUS);
ret = mv88e6xxx_reg_read(ds, REG_GLOBAL, GLOBAL_STATUS);
if (ret < 0)
return ret;
usleep_range(1000, 2000);
if ((ret & GLOBAL_STATUS_PPU_MASK) ==
GLOBAL_STATUS_PPU_POLLING)
......@@ -2667,7 +2700,9 @@ int mv88e6xxx_setup_common(struct dsa_switch *ds)
ps->ds = ds;
mutex_init(&ps->smi_mutex);
ps->id = REG_READ(REG_PORT(0), PORT_SWITCH_ID) & 0xfff0;
ps->id = mv88e6xxx_reg_read(ds, REG_PORT(0), PORT_SWITCH_ID) & 0xfff0;
if (ps->id < 0)
return ps->id;
INIT_WORK(&ps->bridge_work, mv88e6xxx_bridge_work);
......@@ -2677,42 +2712,67 @@ int mv88e6xxx_setup_common(struct dsa_switch *ds)
int mv88e6xxx_setup_global(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
int ret;
int err;
int i;
mutex_lock(&ps->smi_mutex);
/* Set the default address aging time to 5 minutes, and
* enable address learn messages to be sent to all message
* ports.
*/
REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
0x0140 | GLOBAL_ATU_CONTROL_LEARN2ALL);
err = _mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_ATU_CONTROL,
0x0140 | GLOBAL_ATU_CONTROL_LEARN2ALL);
if (err)
goto unlock;
/* Configure the IP ToS mapping registers. */
REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_0, 0x0000);
REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_1, 0x0000);
REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_2, 0x5555);
REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_3, 0x5555);
REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_4, 0xaaaa);
REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_5, 0xaaaa);
REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_6, 0xffff);
REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_7, 0xffff);
err = _mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_IP_PRI_0, 0x0000);
if (err)
goto unlock;
err = _mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_IP_PRI_1, 0x0000);
if (err)
goto unlock;
err = _mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_IP_PRI_2, 0x5555);
if (err)
goto unlock;
err = _mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_IP_PRI_3, 0x5555);
if (err)
goto unlock;
err = _mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_IP_PRI_4, 0xaaaa);
if (err)
goto unlock;
err = _mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_IP_PRI_5, 0xaaaa);
if (err)
goto unlock;
err = _mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_IP_PRI_6, 0xffff);
if (err)
goto unlock;
err = _mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_IP_PRI_7, 0xffff);
if (err)
goto unlock;
/* Configure the IEEE 802.1p priority mapping register. */
REG_WRITE(REG_GLOBAL, GLOBAL_IEEE_PRI, 0xfa41);
err = _mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_IEEE_PRI, 0xfa41);
if (err)
goto unlock;
/* Send all frames with destination addresses matching
* 01:80:c2:00:00:0x to the CPU port.
*/
REG_WRITE(REG_GLOBAL2, GLOBAL2_MGMT_EN_0X, 0xffff);
err = _mv88e6xxx_reg_write(ds, REG_GLOBAL2, GLOBAL2_MGMT_EN_0X, 0xffff);
if (err)
goto unlock;
/* Ignore removed tag data on doubly tagged packets, disable
* flow control messages, force flow control priority to the
* highest, and send all special multicast frames to the CPU
* port at the highest priority.
*/
REG_WRITE(REG_GLOBAL2, GLOBAL2_SWITCH_MGMT,
0x7 | GLOBAL2_SWITCH_MGMT_RSVD2CPU | 0x70 |
GLOBAL2_SWITCH_MGMT_FORCE_FLOW_CTRL_PRI);
err = _mv88e6xxx_reg_write(ds, REG_GLOBAL2, GLOBAL2_SWITCH_MGMT,
0x7 | GLOBAL2_SWITCH_MGMT_RSVD2CPU | 0x70 |
GLOBAL2_SWITCH_MGMT_FORCE_FLOW_CTRL_PRI);
if (err)
goto unlock;
/* Program the DSA routing table. */
for (i = 0; i < 32; i++) {
......@@ -2722,23 +2782,35 @@ int mv88e6xxx_setup_global(struct dsa_switch *ds)
i != ds->index && i < ds->dst->pd->nr_chips)
nexthop = ds->pd->rtable[i] & 0x1f;
REG_WRITE(REG_GLOBAL2, GLOBAL2_DEVICE_MAPPING,
GLOBAL2_DEVICE_MAPPING_UPDATE |
(i << GLOBAL2_DEVICE_MAPPING_TARGET_SHIFT) |
nexthop);
err = _mv88e6xxx_reg_write(
ds, REG_GLOBAL2,
GLOBAL2_DEVICE_MAPPING,
GLOBAL2_DEVICE_MAPPING_UPDATE |
(i << GLOBAL2_DEVICE_MAPPING_TARGET_SHIFT) | nexthop);
if (err)
goto unlock;
}
/* Clear all trunk masks. */
for (i = 0; i < 8; i++)
REG_WRITE(REG_GLOBAL2, GLOBAL2_TRUNK_MASK,
0x8000 | (i << GLOBAL2_TRUNK_MASK_NUM_SHIFT) |
((1 << ps->num_ports) - 1));
for (i = 0; i < 8; i++) {
err = _mv88e6xxx_reg_write(ds, REG_GLOBAL2, GLOBAL2_TRUNK_MASK,
0x8000 |
(i << GLOBAL2_TRUNK_MASK_NUM_SHIFT) |
((1 << ps->num_ports) - 1));
if (err)
goto unlock;
}
/* Clear all trunk mappings. */
for (i = 0; i < 16; i++)
REG_WRITE(REG_GLOBAL2, GLOBAL2_TRUNK_MAPPING,
GLOBAL2_TRUNK_MAPPING_UPDATE |
(i << GLOBAL2_TRUNK_MAPPING_ID_SHIFT));
for (i = 0; i < 16; i++) {
err = _mv88e6xxx_reg_write(
ds, REG_GLOBAL2,
GLOBAL2_TRUNK_MAPPING,
GLOBAL2_TRUNK_MAPPING_UPDATE |
(i << GLOBAL2_TRUNK_MAPPING_ID_SHIFT));
if (err)
goto unlock;
}
if (mv88e6xxx_6352_family(ds) || mv88e6xxx_6351_family(ds) ||
mv88e6xxx_6165_family(ds) || mv88e6xxx_6097_family(ds) ||
......@@ -2746,17 +2818,27 @@ int mv88e6xxx_setup_global(struct dsa_switch *ds)
/* Send all frames with destination addresses matching
* 01:80:c2:00:00:2x to the CPU port.
*/
REG_WRITE(REG_GLOBAL2, GLOBAL2_MGMT_EN_2X, 0xffff);
err = _mv88e6xxx_reg_write(ds, REG_GLOBAL2,
GLOBAL2_MGMT_EN_2X, 0xffff);
if (err)
goto unlock;
/* Initialise cross-chip port VLAN table to reset
* defaults.
*/
REG_WRITE(REG_GLOBAL2, GLOBAL2_PVT_ADDR, 0x9000);
err = _mv88e6xxx_reg_write(ds, REG_GLOBAL2,
GLOBAL2_PVT_ADDR, 0x9000);
if (err)
goto unlock;
/* Clear the priority override table. */
for (i = 0; i < 16; i++)
REG_WRITE(REG_GLOBAL2, GLOBAL2_PRIO_OVERRIDE,
0x8000 | (i << 8));
for (i = 0; i < 16; i++) {
err = _mv88e6xxx_reg_write(ds, REG_GLOBAL2,
GLOBAL2_PRIO_OVERRIDE,
0x8000 | (i << 8));
if (err)
goto unlock;
}
}
if (mv88e6xxx_6352_family(ds) || mv88e6xxx_6351_family(ds) ||
......@@ -2767,31 +2849,37 @@ int mv88e6xxx_setup_global(struct dsa_switch *ds)
* ingress rate limit registers to their initial
* state.
*/
for (i = 0; i < ps->num_ports; i++)
REG_WRITE(REG_GLOBAL2, GLOBAL2_INGRESS_OP,
0x9000 | (i << 8));
for (i = 0; i < ps->num_ports; i++) {
err = _mv88e6xxx_reg_write(ds, REG_GLOBAL2,
GLOBAL2_INGRESS_OP,
0x9000 | (i << 8));
if (err)
goto unlock;
}
}
/* Clear the statistics counters for all ports */
REG_WRITE(REG_GLOBAL, GLOBAL_STATS_OP, GLOBAL_STATS_OP_FLUSH_ALL);
err = _mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_STATS_OP,
GLOBAL_STATS_OP_FLUSH_ALL);
if (err)
goto unlock;
/* Wait for the flush to complete. */
mutex_lock(&ps->smi_mutex);
ret = _mv88e6xxx_stats_wait(ds);
if (ret < 0)
err = _mv88e6xxx_stats_wait(ds);
if (err < 0)
goto unlock;
/* Clear all ATU entries */
ret = _mv88e6xxx_atu_flush(ds, 0, true);
if (ret < 0)
err = _mv88e6xxx_atu_flush(ds, 0, true);
if (err < 0)
goto unlock;
/* Clear all the VTU and STU entries */
ret = _mv88e6xxx_vtu_stu_flush(ds);
err = _mv88e6xxx_vtu_stu_flush(ds);
unlock:
mutex_unlock(&ps->smi_mutex);
return ret;
return err;
}
int mv88e6xxx_switch_reset(struct dsa_switch *ds, bool ppu_active)
......@@ -2803,10 +2891,18 @@ int mv88e6xxx_switch_reset(struct dsa_switch *ds, bool ppu_active)
int ret;
int i;
mutex_lock(&ps->smi_mutex);
/* Set all ports to the disabled state. */
for (i = 0; i < ps->num_ports; i++) {
ret = REG_READ(REG_PORT(i), PORT_CONTROL);
REG_WRITE(REG_PORT(i), PORT_CONTROL, ret & 0xfffc);
ret = _mv88e6xxx_reg_read(ds, REG_PORT(i), PORT_CONTROL);
if (ret < 0)
goto unlock;
ret = _mv88e6xxx_reg_write(ds, REG_PORT(i), PORT_CONTROL,
ret & 0xfffc);
if (ret)
goto unlock;
}
/* Wait for transmit queues to drain. */
......@@ -2825,22 +2921,31 @@ int mv88e6xxx_switch_reset(struct dsa_switch *ds, bool ppu_active)
* through global registers 0x18 and 0x19.
*/
if (ppu_active)
REG_WRITE(REG_GLOBAL, 0x04, 0xc000);
ret = _mv88e6xxx_reg_write(ds, REG_GLOBAL, 0x04, 0xc000);
else
REG_WRITE(REG_GLOBAL, 0x04, 0xc400);
ret = _mv88e6xxx_reg_write(ds, REG_GLOBAL, 0x04, 0xc400);
if (ret)
goto unlock;
/* Wait up to one second for reset to complete. */
timeout = jiffies + 1 * HZ;
while (time_before(jiffies, timeout)) {
ret = REG_READ(REG_GLOBAL, 0x00);
ret = _mv88e6xxx_reg_read(ds, REG_GLOBAL, 0x00);
if (ret < 0)
goto unlock;
if ((ret & is_reset) == is_reset)
break;
usleep_range(1000, 2000);
}
if (time_after(jiffies, timeout))
return -ETIMEDOUT;
ret = -ETIMEDOUT;
else
ret = 0;
unlock:
mutex_unlock(&ps->smi_mutex);
return 0;
return ret;
}
int mv88e6xxx_phy_page_read(struct dsa_switch *ds, int port, int page, int reg)
......
......@@ -542,25 +542,4 @@ extern struct dsa_switch_driver mv88e6123_switch_driver;
extern struct dsa_switch_driver mv88e6352_switch_driver;
extern struct dsa_switch_driver mv88e6171_switch_driver;
#define REG_READ(addr, reg) \
({ \
int __ret; \
\
__ret = mv88e6xxx_reg_read(ds, addr, reg); \
if (__ret < 0) \
return __ret; \
__ret; \
})
#define REG_WRITE(addr, reg, val) \
({ \
int __ret; \
\
__ret = mv88e6xxx_reg_write(ds, addr, reg, val); \
if (__ret < 0) \
return __ret; \
})
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册