Revert "net: bcmgenet: Software reset EPHY after power on"

With commit f7d72996e222 ("net: bcmgenet: enable loopback during
UniMAC sw_reset") it is no longer necessary to force the software
reset of the internal EPHY before resetting the UniMAC to ensure a
clean reset.

Therefore this commit reverts commit 5dbebbb4 ("net: bcmgenet:
Software reset EPHY after power on").
Signed-off-by: NDoug Berger <opendmb@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/genet/bcmgenet.c

@@ -1172,7 +1172,6 @@ static void bcmgenet_power_up(struct bcmgenet_priv *priv,
 		}
 		bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
 		bcmgenet_phy_power_set(priv->dev, true);
-		bcmgenet_mii_reset(priv->dev);
 		break;
 
 	case GENET_POWER_CABLE_SENSE:

drivers/net/ethernet/broadcom/genet/bcmgenet.h

@@ -711,7 +711,6 @@ int bcmgenet_mii_init(struct net_device *dev);
 int bcmgenet_mii_config(struct net_device *dev, bool init);
 int bcmgenet_mii_probe(struct net_device *dev);
 void bcmgenet_mii_exit(struct net_device *dev);
-void bcmgenet_mii_reset(struct net_device *dev);
 void bcmgenet_phy_power_set(struct net_device *dev, bool enable);
 void bcmgenet_mii_setup(struct net_device *dev);
 

drivers/net/ethernet/broadcom/genet/bcmmii.c

@@ -121,22 +121,6 @@ static int bcmgenet_fixed_phy_link_update(struct net_device *dev,
 	return 0;
 }
 
-/* Perform a voluntary PHY software reset, since the EPHY is very finicky about
- * not doing it and will start corrupting packets
- */
-void bcmgenet_mii_reset(struct net_device *dev)
-{
-	struct bcmgenet_priv *priv = netdev_priv(dev);
-
-	if (GENET_IS_V4(priv))
-		return;
-
-	if (priv->phydev) {
-		phy_init_hw(priv->phydev);
-		phy_start_aneg(priv->phydev);
-	}
-}
-
 void bcmgenet_phy_power_set(struct net_device *dev, bool enable)
 {
 	struct bcmgenet_priv *priv = netdev_priv(dev);