media: v4l2-dev: convert VFL_TYPE_* into an enum

Using enums makes easier to document, as it can use kernel-doc
markups. It also allows cross-referencing, with increases the
kAPI readability.

Please notice that now cx88_querycap() has to have a default for
the VFL type, as there are more types than supported by the driver.
Acked-By: NMike Isely <isely@pobox.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Documentation/media/kapi/v4l2-dev.rst

@@ -196,11 +196,18 @@ device.
 Which device is registered depends on the type argument. The following
 types exist:
 
-- ``VFL_TYPE_GRABBER``: ``/dev/videoX`` for video input/output devices
-- ``VFL_TYPE_VBI``: ``/dev/vbiX`` for vertical blank data (i.e. closed captions, teletext)
-- ``VFL_TYPE_RADIO``: ``/dev/radioX`` for radio tuners
-- ``VFL_TYPE_SDR``: ``/dev/swradioX`` for Software Defined Radio tuners
-- ``VFL_TYPE_TOUCH``: ``/dev/v4l-touchX`` for touch sensors
+========================== ====================	 ==============================
+:c:type:`vfl_devnode_type` Device name		 Usage
+========================== ====================	 ==============================
+``VFL_TYPE_GRABBER``       ``/dev/videoX``       for video input/output devices
+``VFL_TYPE_VBI``           ``/dev/vbiX``         for vertical blank data (i.e.
+						 closed captions, teletext)
+``VFL_TYPE_RADIO``         ``/dev/radioX``       for radio tuners
+``VFL_TYPE_SUBDEV``        ``/dev/v4l-subdevX``  for V4L2 subdevices
+``VFL_TYPE_SDR``           ``/dev/swradioX``     for Software Defined Radio
+						 (SDR) tuners
+``VFL_TYPE_TOUCH``         ``/dev/v4l-touchX``   for touch sensors
+========================== ====================	 ==============================
 
 The last argument gives you a certain amount of control over the device
 device node number used (i.e. the X in ``videoX``). Normally you will pass -1

drivers/media/pci/cx88/cx88-blackbird.c

@@ -805,8 +805,7 @@ static int vidioc_querycap(struct file *file, void  *priv,
 
 	strcpy(cap->driver, "cx88_blackbird");
 	sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci));
-	cx88_querycap(file, core, cap);
-	return 0;
+	return cx88_querycap(file, core, cap);
 }
 
 static int vidioc_enum_fmt_vid_cap(struct file *file, void  *priv,

drivers/media/pci/cx88/cx88-video.c

@@ -806,8 +806,8 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 	return 0;
 }
 
-void cx88_querycap(struct file *file, struct cx88_core *core,
-		   struct v4l2_capability *cap)
+int cx88_querycap(struct file *file, struct cx88_core *core,
+		  struct v4l2_capability *cap)
 {
 	struct video_device *vdev = video_devdata(file);
 
@@ -825,11 +825,14 @@ void cx88_querycap(struct file *file, struct cx88_core *core,
 	case VFL_TYPE_VBI:
 		cap->device_caps |= V4L2_CAP_VBI_CAPTURE;
 		break;
+	default:
+		return -EINVAL;
 	}
 	cap->capabilities = cap->device_caps | V4L2_CAP_VIDEO_CAPTURE |
 		V4L2_CAP_VBI_CAPTURE | V4L2_CAP_DEVICE_CAPS;
 	if (core->board.radio.type == CX88_RADIO)
 		cap->capabilities |= V4L2_CAP_RADIO;
+	return 0;
 }
 EXPORT_SYMBOL(cx88_querycap);
 
@@ -841,8 +844,7 @@ static int vidioc_querycap(struct file *file, void  *priv,
 
 	strcpy(cap->driver, "cx8800");
 	sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci));
-	cx88_querycap(file, core, cap);
-	return 0;
+	return cx88_querycap(file, core, cap);
 }
 
 static int vidioc_enum_fmt_vid_cap(struct file *file, void  *priv,

drivers/media/pci/cx88/cx88.h

@@ -734,7 +734,7 @@ int cx8802_start_dma(struct cx8802_dev    *dev,
 int cx88_enum_input(struct cx88_core *core, struct v4l2_input *i);
 int cx88_set_freq(struct cx88_core  *core, const struct v4l2_frequency *f);
 int cx88_video_mux(struct cx88_core *core, unsigned int input);
-void cx88_querycap(struct file *file, struct cx88_core *core,
-		   struct v4l2_capability *cap);
+int cx88_querycap(struct file *file, struct cx88_core *core,
+		  struct v4l2_capability *cap);
 
 #endif

drivers/media/pci/saa7134/saa7134-video.c

@@ -1531,6 +1531,8 @@ int saa7134_querycap(struct file *file, void *priv,
 	case VFL_TYPE_VBI:
 		cap->device_caps |= vbi_caps;
 		break;
+	default:
+		return -EINVAL;
 	}
 	cap->capabilities = radio_caps | video_caps | vbi_caps |
 		cap->device_caps | V4L2_CAP_DEVICE_CAPS;

drivers/media/usb/cx231xx/cx231xx-video.c

@@ -1756,6 +1756,8 @@ static int cx231xx_v4l2_open(struct file *filp)
 	case VFL_TYPE_RADIO:
 		radio = 1;
 		break;
+	default:
+		return -EINVAL;
 	}
 
 	cx231xx_videodbg("open dev=%s type=%s users=%d\n",

drivers/media/usb/pvrusb2/pvrusb2-v4l2.c

@@ -153,6 +153,8 @@ static int pvr2_querycap(struct file *file, void *priv, struct v4l2_capability *
 	case VFL_TYPE_RADIO:
 		cap->device_caps = V4L2_CAP_RADIO;
 		break;
+	default:
+		return -EINVAL;
 	}
 	cap->device_caps |= V4L2_CAP_TUNER | V4L2_CAP_READWRITE;
 	return 0;

drivers/media/usb/tm6000/tm6000-video.c

@@ -1313,6 +1313,8 @@ static int __tm6000_open(struct file *file)
 	case VFL_TYPE_RADIO:
 		radio = 1;
 		break;
+	default:
+		return -EINVAL;
 	}
 
 	/* If more than one user, mutex should be added */

drivers/media/v4l2-core/v4l2-dev.c

@@ -102,7 +102,7 @@ static DECLARE_BITMAP(devnode_nums[VFL_TYPE_MAX], VIDEO_NUM_DEVICES);
 
 #ifdef CONFIG_VIDEO_FIXED_MINOR_RANGES
 /* Return the bitmap corresponding to vfl_type. */
-static inline unsigned long *devnode_bits(int vfl_type)
+static inline unsigned long *devnode_bits(enum vfl_devnode_type vfl_type)
 {
 	/* Any types not assigned to fixed minor ranges must be mapped to
 	   one single bitmap for the purposes of finding a free node number
@@ -113,7 +113,7 @@ static inline unsigned long *devnode_bits(int vfl_type)
 }
 #else
 /* Return the bitmap corresponding to vfl_type. */
-static inline unsigned long *devnode_bits(int vfl_type)
+static inline unsigned long *devnode_bits(enum vfl_devnode_type vfl_type)
 {
 	return devnode_nums[vfl_type];
 }
@@ -821,8 +821,10 @@ static int video_register_media_controller(struct video_device *vdev, int type)
 	return 0;
 }
 
-int __video_register_device(struct video_device *vdev, int type, int nr,
-		int warn_if_nr_in_use, struct module *owner)
+int __video_register_device(struct video_device *vdev,
+			    enum vfl_devnode_type type,
+			    int nr, int warn_if_nr_in_use,
+			    struct module *owner)
 {
 	int i = 0;
 	int ret;

include/media/v4l2-dev.h

@@ -21,13 +21,25 @@
 
 #define VIDEO_MAJOR	81
 
-#define VFL_TYPE_GRABBER	0
-#define VFL_TYPE_VBI		1
-#define VFL_TYPE_RADIO		2
-#define VFL_TYPE_SUBDEV		3
-#define VFL_TYPE_SDR		4
-#define VFL_TYPE_TOUCH		5
-#define VFL_TYPE_MAX		6
+/**
+ * enum vfl_devnode_type - type of V4L2 device node
+ *
+ * @VFL_TYPE_GRABBER:	for video input/output devices
+ * @VFL_TYPE_VBI:	for vertical blank data (i.e. closed captions, teletext)
+ * @VFL_TYPE_RADIO:	for radio tuners
+ * @VFL_TYPE_SUBDEV:	for V4L2 subdevices
+ * @VFL_TYPE_SDR:	for Software Defined Radio tuners
+ * @VFL_TYPE_TOUCH:	for touch sensors
+ */
+enum vfl_devnode_type {
+	VFL_TYPE_GRABBER	= 0,
+	VFL_TYPE_VBI		= 1,
+	VFL_TYPE_RADIO		= 2,
+	VFL_TYPE_SUBDEV		= 3,
+	VFL_TYPE_SDR		= 4,
+	VFL_TYPE_TOUCH		= 5,
+};
+#define VFL_TYPE_MAX VFL_TYPE_TOUCH
 
 /* Is this a receiver, transmitter or mem-to-mem? */
 /* Ignored for VFL_TYPE_SUBDEV. */
@@ -189,7 +201,7 @@ struct v4l2_file_operations {
  * @prio: pointer to &struct v4l2_prio_state with device's Priority state.
  *	 If NULL, then v4l2_dev->prio will be used.
  * @name: video device name
- * @vfl_type: V4L device type
+ * @vfl_type: V4L device type, as defined by &enum vfl_devnode_type
  * @vfl_dir: V4L receiver, transmitter or m2m
  * @minor: device node 'minor'. It is set to -1 if the registration failed
  * @num: number of the video device node
@@ -237,7 +249,7 @@ struct video_device
 
 	/* device info */
 	char name[32];
-	int vfl_type;
+	enum vfl_devnode_type vfl_type;
 	int vfl_dir;
 	int minor;
 	u16 num;
@@ -282,7 +294,7 @@ struct video_device
  * __video_register_device - register video4linux devices
  *
  * @vdev: struct video_device to register
- * @type: type of device to register
+ * @type: type of device to register, as defined by &enum vfl_devnode_type
  * @nr:   which device node number is desired:
  * 	(0 == /dev/video0, 1 == /dev/video1, ..., -1 == first free)
  * @warn_if_nr_in_use: warn if the desired device node number
@@ -301,29 +313,22 @@ struct video_device
  *
  * Returns 0 on success.
  *
- * Valid values for @type are:
- *
- *	- %VFL_TYPE_GRABBER - A frame grabber
- *	- %VFL_TYPE_VBI - Vertical blank data (undecoded)
- *	- %VFL_TYPE_RADIO - A radio card
- *	- %VFL_TYPE_SUBDEV - A subdevice
- *	- %VFL_TYPE_SDR - Software Defined Radio
- *	- %VFL_TYPE_TOUCH - A touch sensor
- *
  * .. note::
  *
  *	This function is meant to be used only inside the V4L2 core.
  *	Drivers should use video_register_device() or
  *	video_register_device_no_warn().
  */
-int __must_check __video_register_device(struct video_device *vdev, int type,
-		int nr, int warn_if_nr_in_use, struct module *owner);
+int __must_check __video_register_device(struct video_device *vdev,
+					 enum vfl_devnode_type type,
+					 int nr, int warn_if_nr_in_use,
+					 struct module *owner);
 
 /**
  *  video_register_device - register video4linux devices
  *
  * @vdev: struct video_device to register
- * @type: type of device to register
+ * @type: type of device to register, as defined by &enum vfl_devnode_type
  * @nr:   which device node number is desired:
  * 	(0 == /dev/video0, 1 == /dev/video1, ..., -1 == first free)
  *
@@ -337,7 +342,8 @@ int __must_check __video_register_device(struct video_device *vdev, int type,
  *	you video_device_release() should be called on failure.
  */
 static inline int __must_check video_register_device(struct video_device *vdev,
-		int type, int nr)
+						     enum vfl_devnode_type type,
+						     int nr)
 {
 	return __video_register_device(vdev, type, nr, 1, vdev->fops->owner);
 }
@@ -346,7 +352,7 @@ static inline int __must_check video_register_device(struct video_device *vdev,
  *  video_register_device_no_warn - register video4linux devices
  *
  * @vdev: struct video_device to register
- * @type: type of device to register
+ * @type: type of device to register, as defined by &enum vfl_devnode_type
  * @nr:   which device node number is desired:
  * 	(0 == /dev/video0, 1 == /dev/video1, ..., -1 == first free)
  *
@@ -362,8 +368,9 @@ static inline int __must_check video_register_device(struct video_device *vdev,
  *	is responsible for freeing any data. Usually that means that
  *	you video_device_release() should be called on failure.
  */
-static inline int __must_check video_register_device_no_warn(
-		struct video_device *vdev, int type, int nr)
+static inline int __must_check
+video_register_device_no_warn(struct video_device *vdev,
+			      enum vfl_devnode_type type, int nr)
 {
 	return __video_register_device(vdev, type, nr, 0, vdev->fops->owner);
 }

include/media/v4l2-mediabus.h

@@ -93,6 +93,13 @@ struct v4l2_mbus_config {
 	unsigned int flags;
 };
 
+/**
+ * v4l2_fill_pix_format - Ancillary routine that fills a &struct
+ *	v4l2_pix_format fields from a &struct v4l2_mbus_framefmt.
+ *
+ * @pix_fmt:	pointer to &struct v4l2_pix_format to be filled
+ * @mbus_fmt:	pointer to &struct v4l2_mbus_framefmt to be used as model
+ */
 static inline void v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt,
 				const struct v4l2_mbus_framefmt *mbus_fmt)
 {
@@ -105,6 +112,15 @@ static inline void v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt,
 	pix_fmt->xfer_func = mbus_fmt->xfer_func;
 }
 
+/**
+ * v4l2_fill_pix_format - Ancillary routine that fills a &struct
+ *	v4l2_mbus_framefmt from a &struct v4l2_pix_format and a
+ *	data format code.
+ *
+ * @mbus_fmt:	pointer to &struct v4l2_mbus_framefmt to be filled
+ * @pix_fmt:	pointer to &struct v4l2_pix_format to be used as model
+ * @code:	data format code (from &enum v4l2_mbus_pixelcode)
+ */
 static inline void v4l2_fill_mbus_format(struct v4l2_mbus_framefmt *mbus_fmt,
 			   const struct v4l2_pix_format *pix_fmt,
 			   u32 code)
@@ -119,6 +135,13 @@ static inline void v4l2_fill_mbus_format(struct v4l2_mbus_framefmt *mbus_fmt,
 	mbus_fmt->code = code;
 }
 
+/**
+ * v4l2_fill_pix_format - Ancillary routine that fills a &struct
+ *	v4l2_pix_format_mplane fields from a media bus structure.
+ *
+ * @pix_mp_fmt:	pointer to &struct v4l2_pix_format_mplane to be filled
+ * @mbus_fmt:	pointer to &struct v4l2_mbus_framefmt to be used as model
+ */
 static inline void v4l2_fill_pix_format_mplane(
 				struct v4l2_pix_format_mplane *pix_mp_fmt,
 				const struct v4l2_mbus_framefmt *mbus_fmt)
@@ -132,6 +155,13 @@ static inline void v4l2_fill_pix_format_mplane(
 	pix_mp_fmt->xfer_func = mbus_fmt->xfer_func;
 }
 
+/**
+ * v4l2_fill_pix_format - Ancillary routine that fills a &struct
+ *	v4l2_mbus_framefmt from a &struct v4l2_pix_format_mplane.
+ *
+ * @mbus_fmt:	pointer to &struct v4l2_mbus_framefmt to be filled
+ * @pix_mp_fmt:	pointer to &struct v4l2_pix_format_mplane to be used as model
+ */
 static inline void v4l2_fill_mbus_format_mplane(
 				struct v4l2_mbus_framefmt *mbus_fmt,
 				const struct v4l2_pix_format_mplane *pix_mp_fmt)