提交 47f2a9ce 编写于 作者: J Joao Pinto 提交者: David S. Miller

net: stmmac: dma channel init prepared for multiple queues

This patch prepares the DMA initialization process for multiple queues.
Signed-off-by: NJoao Pinto <jpinto@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 89cc57c5
......@@ -416,6 +416,14 @@ struct stmmac_dma_ops {
int (*reset)(void __iomem *ioaddr);
void (*init)(void __iomem *ioaddr, struct stmmac_dma_cfg *dma_cfg,
u32 dma_tx, u32 dma_rx, int atds);
void (*init_chan)(void __iomem *ioaddr,
struct stmmac_dma_cfg *dma_cfg, u32 chan);
void (*init_rx_chan)(void __iomem *ioaddr,
struct stmmac_dma_cfg *dma_cfg,
u32 dma_rx_phy, u32 chan);
void (*init_tx_chan)(void __iomem *ioaddr,
struct stmmac_dma_cfg *dma_cfg,
u32 dma_tx_phy, u32 chan);
/* Configure the AXI Bus Mode Register */
void (*axi)(void __iomem *ioaddr, struct stmmac_axi *axi);
/* Dump DMA registers */
......
......@@ -71,36 +71,48 @@ static void dwmac4_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)
writel(value, ioaddr + DMA_SYS_BUS_MODE);
}
static void dwmac4_dma_init_channel(void __iomem *ioaddr,
struct stmmac_dma_cfg *dma_cfg,
u32 dma_tx_phy, u32 dma_rx_phy,
u32 channel)
void dwmac4_dma_init_rx_chan(void __iomem *ioaddr,
struct stmmac_dma_cfg *dma_cfg,
u32 dma_rx_phy, u32 chan)
{
u32 value;
int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
u32 rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
/* set PBL for each channels. Currently we affect same configuration
* on each channel
*/
value = readl(ioaddr + DMA_CHAN_CONTROL(channel));
if (dma_cfg->pblx8)
value = value | DMA_BUS_MODE_PBL;
writel(value, ioaddr + DMA_CHAN_CONTROL(channel));
value = readl(ioaddr + DMA_CHAN_RX_CONTROL(chan));
value = value | (rxpbl << DMA_BUS_MODE_RPBL_SHIFT);
writel(value, ioaddr + DMA_CHAN_RX_CONTROL(chan));
writel(dma_rx_phy, ioaddr + DMA_CHAN_RX_BASE_ADDR(chan));
}
value = readl(ioaddr + DMA_CHAN_TX_CONTROL(channel));
void dwmac4_dma_init_tx_chan(void __iomem *ioaddr,
struct stmmac_dma_cfg *dma_cfg,
u32 dma_tx_phy, u32 chan)
{
u32 value;
u32 txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
value = readl(ioaddr + DMA_CHAN_TX_CONTROL(chan));
value = value | (txpbl << DMA_BUS_MODE_PBL_SHIFT);
writel(value, ioaddr + DMA_CHAN_TX_CONTROL(channel));
writel(value, ioaddr + DMA_CHAN_TX_CONTROL(chan));
value = readl(ioaddr + DMA_CHAN_RX_CONTROL(channel));
value = value | (rxpbl << DMA_BUS_MODE_RPBL_SHIFT);
writel(value, ioaddr + DMA_CHAN_RX_CONTROL(channel));
writel(dma_tx_phy, ioaddr + DMA_CHAN_TX_BASE_ADDR(chan));
}
/* Mask interrupts by writing to CSR7 */
writel(DMA_CHAN_INTR_DEFAULT_MASK, ioaddr + DMA_CHAN_INTR_ENA(channel));
void dwmac4_dma_init_channel(void __iomem *ioaddr,
struct stmmac_dma_cfg *dma_cfg, u32 chan)
{
u32 value;
/* common channel control register config */
value = readl(ioaddr + DMA_CHAN_CONTROL(chan));
if (dma_cfg->pblx8)
value = value | DMA_BUS_MODE_PBL;
writel(value, ioaddr + DMA_CHAN_CONTROL(chan));
writel(dma_tx_phy, ioaddr + DMA_CHAN_TX_BASE_ADDR(channel));
writel(dma_rx_phy, ioaddr + DMA_CHAN_RX_BASE_ADDR(channel));
/* Mask interrupts by writing to CSR7 */
writel(DMA_CHAN_INTR_DEFAULT_MASK,
ioaddr + DMA_CHAN_INTR_ENA(chan));
}
static void dwmac4_dma_init(void __iomem *ioaddr,
......@@ -108,7 +120,6 @@ static void dwmac4_dma_init(void __iomem *ioaddr,
u32 dma_tx, u32 dma_rx, int atds)
{
u32 value = readl(ioaddr + DMA_SYS_BUS_MODE);
int i;
/* Set the Fixed burst mode */
if (dma_cfg->fixed_burst)
......@@ -122,9 +133,6 @@ static void dwmac4_dma_init(void __iomem *ioaddr,
value |= DMA_SYS_BUS_AAL;
writel(value, ioaddr + DMA_SYS_BUS_MODE);
for (i = 0; i < DMA_CHANNEL_NB_MAX; i++)
dwmac4_dma_init_channel(ioaddr, dma_cfg, dma_tx, dma_rx, i);
}
static void _dwmac4_dump_dma_regs(void __iomem *ioaddr, u32 channel,
......@@ -379,6 +387,9 @@ static void dwmac4_enable_tso(void __iomem *ioaddr, bool en, u32 chan)
const struct stmmac_dma_ops dwmac4_dma_ops = {
.reset = dwmac4_dma_reset,
.init = dwmac4_dma_init,
.init_chan = dwmac4_dma_init_channel,
.init_rx_chan = dwmac4_dma_init_rx_chan,
.init_tx_chan = dwmac4_dma_init_tx_chan,
.axi = dwmac4_dma_axi,
.dump_regs = dwmac4_dump_dma_regs,
.dma_rx_mode = dwmac4_dma_rx_chan_op_mode,
......@@ -402,6 +413,9 @@ const struct stmmac_dma_ops dwmac4_dma_ops = {
const struct stmmac_dma_ops dwmac410_dma_ops = {
.reset = dwmac4_dma_reset,
.init = dwmac4_dma_init,
.init_chan = dwmac4_dma_init_channel,
.init_rx_chan = dwmac4_dma_init_rx_chan,
.init_tx_chan = dwmac4_dma_init_tx_chan,
.axi = dwmac4_dma_axi,
.dump_regs = dwmac4_dump_dma_regs,
.dma_rx_mode = dwmac4_dma_rx_chan_op_mode,
......
......@@ -1732,6 +1732,11 @@ static void stmmac_check_ether_addr(struct stmmac_priv *priv)
*/
static int stmmac_init_dma_engine(struct stmmac_priv *priv)
{
u32 rx_channels_count = priv->plat->rx_queues_to_use;
u32 tx_channels_count = priv->plat->tx_queues_to_use;
u32 dummy_dma_rx_phy = 0;
u32 dummy_dma_tx_phy = 0;
u32 chan = 0;
int atds = 0;
int ret = 0;
......@@ -1749,19 +1754,43 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv)
return ret;
}
priv->hw->dma->init(priv->ioaddr, priv->plat->dma_cfg,
priv->dma_tx_phy, priv->dma_rx_phy, atds);
if (priv->synopsys_id >= DWMAC_CORE_4_00) {
priv->rx_tail_addr = priv->dma_rx_phy +
(DMA_RX_SIZE * sizeof(struct dma_desc));
priv->hw->dma->set_rx_tail_ptr(priv->ioaddr, priv->rx_tail_addr,
STMMAC_CHAN0);
/* DMA Configuration */
priv->hw->dma->init(priv->ioaddr, priv->plat->dma_cfg,
dummy_dma_tx_phy, dummy_dma_rx_phy, atds);
/* DMA RX Channel Configuration */
for (chan = 0; chan < rx_channels_count; chan++) {
priv->hw->dma->init_rx_chan(priv->ioaddr,
priv->plat->dma_cfg,
priv->dma_rx_phy, chan);
priv->rx_tail_addr = priv->dma_rx_phy +
(DMA_RX_SIZE * sizeof(struct dma_desc));
priv->hw->dma->set_rx_tail_ptr(priv->ioaddr,
priv->rx_tail_addr,
chan);
}
priv->tx_tail_addr = priv->dma_tx_phy +
(DMA_TX_SIZE * sizeof(struct dma_desc));
priv->hw->dma->set_tx_tail_ptr(priv->ioaddr, priv->tx_tail_addr,
STMMAC_CHAN0);
/* DMA TX Channel Configuration */
for (chan = 0; chan < tx_channels_count; chan++) {
priv->hw->dma->init_chan(priv->ioaddr,
priv->plat->dma_cfg,
chan);
priv->hw->dma->init_tx_chan(priv->ioaddr,
priv->plat->dma_cfg,
priv->dma_tx_phy, chan);
priv->tx_tail_addr = priv->dma_tx_phy +
(DMA_TX_SIZE * sizeof(struct dma_desc));
priv->hw->dma->set_tx_tail_ptr(priv->ioaddr,
priv->tx_tail_addr,
chan);
}
} else {
priv->hw->dma->init(priv->ioaddr, priv->plat->dma_cfg,
priv->dma_tx_phy, priv->dma_rx_phy, atds);
}
if (priv->plat->axi && priv->hw->dma->axi)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册