提交 474aa3dd 编写于 作者: T Thomas Gleixner

Merge tag 'irqchip-core-4.9' of git://git.infradead.org/users/jcooper/linux into irq/core

Pull irqchip core changes for v4.9 from Jason Cooper

 - jcore: Add AIC driver
 - mips-gic: Use for_each_set_bit
 - mvebu: Add PIC driver
J-Core Advanced Interrupt Controller
Required properties:
- compatible: Should be "jcore,aic1" for the (obsolete) first-generation aic
with 8 interrupt lines with programmable priorities, or "jcore,aic2" for
the "aic2" core with 64 interrupts.
- reg: Memory region(s) for configuration. For SMP, there should be one
region per cpu, indexed by the sequential, zero-based hardware cpu
number.
- interrupt-controller: Identifies the node as an interrupt controller
- #interrupt-cells: Specifies the number of cells needed to encode an
interrupt source. The value shall be 1.
Example:
aic: interrupt-controller@200 {
compatible = "jcore,aic2";
reg = < 0x200 0x30 0x500 0x30 >;
interrupt-controller;
#interrupt-cells = <1>;
};
Marvell Armada 7K/8K PIC Interrupt controller
---------------------------------------------
This is the Device Tree binding for the PIC, a secondary interrupt
controller available on the Marvell Armada 7K/8K ARM64 SoCs, and
typically connected to the GIC as the primary interrupt controller.
Required properties:
- compatible: should be "marvell,armada-8k-pic"
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: the number of cells to define interrupts on this
controller. Should be 1
- reg: the register area for the PIC interrupt controller
- interrupts: the interrupt to the primary interrupt controller,
typically the GIC
Example:
pic: interrupt-controller@3f0100 {
compatible = "marvell,armada-8k-pic";
reg = <0x3f0100 0x10>;
#interrupt-cells = <1>;
interrupt-controller;
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
};
......@@ -31,7 +31,7 @@ Required properties:
Example:
odmi: odmi@300000 {
compatible = "marvell,ap806-odm-controller",
compatible = "marvell,ap806-odmi-controller",
"marvell,odmi-controller";
interrupt-controller;
msi-controller;
......
......@@ -93,6 +93,7 @@ config ARCH_MVEBU
select ARMADA_CP110_SYSCON
select ARMADA_37XX_CLK
select MVEBU_ODMI
select MVEBU_PIC
help
This enables support for Marvell EBU familly, including:
- Armada 3700 SoC Family
......
......@@ -157,6 +157,13 @@ config PIC32_EVIC
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
config JCORE_AIC
bool "J-Core integrated AIC"
depends on OF && (SUPERH || COMPILE_TEST)
select IRQ_DOMAIN
help
Support for the J-Core integrated AIC.
config RENESAS_INTC_IRQPIN
bool
select IRQ_DOMAIN
......@@ -252,6 +259,9 @@ config IRQ_MXS
config MVEBU_ODMI
bool
config MVEBU_PIC
bool
config LS_SCFG_MSI
def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE
depends on PCI && PCI_MSI
......
......@@ -40,6 +40,7 @@ obj-$(CONFIG_I8259) += irq-i8259.o
obj-$(CONFIG_IMGPDC_IRQ) += irq-imgpdc.o
obj-$(CONFIG_IRQ_MIPS_CPU) += irq-mips-cpu.o
obj-$(CONFIG_SIRF_IRQ) += irq-sirfsoc.o
obj-$(CONFIG_JCORE_AIC) += irq-jcore-aic.o
obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o
obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o
obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o
......@@ -68,6 +69,7 @@ obj-$(CONFIG_INGENIC_IRQ) += irq-ingenic.o
obj-$(CONFIG_IMX_GPCV2) += irq-imx-gpcv2.o
obj-$(CONFIG_PIC32_EVIC) += irq-pic32-evic.o
obj-$(CONFIG_MVEBU_ODMI) += irq-mvebu-odmi.o
obj-$(CONFIG_MVEBU_PIC) += irq-mvebu-pic.o
obj-$(CONFIG_LS_SCFG_MSI) += irq-ls-scfg-msi.o
obj-$(CONFIG_EZNPS_GIC) += irq-eznps.o
obj-$(CONFIG_ARCH_ASPEED) += irq-aspeed-vic.o
......
/*
* J-Core SoC AIC driver
*
* Copyright (C) 2015-2016 Smart Energy Instruments, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/irqchip.h>
#include <linux/irqdomain.h>
#include <linux/cpu.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#define JCORE_AIC_MAX_HWIRQ 127
#define JCORE_AIC1_MIN_HWIRQ 16
#define JCORE_AIC2_MIN_HWIRQ 64
#define JCORE_AIC1_INTPRI_REG 8
static struct irq_chip jcore_aic;
static int jcore_aic_irqdomain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hwirq)
{
struct irq_chip *aic = d->host_data;
irq_set_chip_and_handler(irq, aic, handle_simple_irq);
return 0;
}
static const struct irq_domain_ops jcore_aic_irqdomain_ops = {
.map = jcore_aic_irqdomain_map,
.xlate = irq_domain_xlate_onecell,
};
static void noop(struct irq_data *data)
{
}
static int __init aic_irq_of_init(struct device_node *node,
struct device_node *parent)
{
unsigned min_irq = JCORE_AIC2_MIN_HWIRQ;
unsigned dom_sz = JCORE_AIC_MAX_HWIRQ+1;
struct irq_domain *domain;
pr_info("Initializing J-Core AIC\n");
/* AIC1 needs priority initialization to receive interrupts. */
if (of_device_is_compatible(node, "jcore,aic1")) {
unsigned cpu;
for_each_present_cpu(cpu) {
void __iomem *base = of_iomap(node, cpu);
if (!base) {
pr_err("Unable to map AIC for cpu %u\n", cpu);
return -ENOMEM;
}
__raw_writel(0xffffffff, base + JCORE_AIC1_INTPRI_REG);
iounmap(base);
}
min_irq = JCORE_AIC1_MIN_HWIRQ;
}
/*
* The irq chip framework requires either mask/unmask or enable/disable
* function pointers to be provided, but the hardware does not have any
* such mechanism; the only interrupt masking is at the cpu level and
* it affects all interrupts. We provide dummy mask/unmask. The hardware
* handles all interrupt control and clears pending status when the cpu
* accepts the interrupt.
*/
jcore_aic.irq_mask = noop;
jcore_aic.irq_unmask = noop;
jcore_aic.name = "AIC";
domain = irq_domain_add_linear(node, dom_sz, &jcore_aic_irqdomain_ops,
&jcore_aic);
if (!domain)
return -ENOMEM;
irq_create_strict_mappings(domain, min_irq, min_irq, dom_sz - min_irq);
return 0;
}
IRQCHIP_DECLARE(jcore_aic2, "jcore,aic2", aic_irq_of_init);
IRQCHIP_DECLARE(jcore_aic1, "jcore,aic1", aic_irq_of_init);
......@@ -109,7 +109,7 @@ static void keystone_irq_handler(struct irq_desc *desc)
dev_dbg(kirq->dev, "dispatch bit %d, virq %d\n",
src, virq);
if (!virq)
dev_warn(kirq->dev, "sporious irq detected hwirq %d, virq %d\n",
dev_warn(kirq->dev, "spurious irq detected hwirq %d, virq %d\n",
src, virq);
generic_handle_irq(virq);
}
......
......@@ -371,18 +371,13 @@ static void gic_handle_shared_int(bool chained)
bitmap_and(pending, pending, intrmask, gic_shared_intrs);
bitmap_and(pending, pending, pcpu_mask, gic_shared_intrs);
intr = find_first_bit(pending, gic_shared_intrs);
while (intr != gic_shared_intrs) {
for_each_set_bit(intr, pending, gic_shared_intrs) {
virq = irq_linear_revmap(gic_irq_domain,
GIC_SHARED_TO_HWIRQ(intr));
if (chained)
generic_handle_irq(virq);
else
do_IRQ(virq);
/* go to next pending bit */
bitmap_clear(pending, intr, 1);
intr = find_first_bit(pending, gic_shared_intrs);
}
}
......
/*
* Copyright (C) 2016 Marvell
*
* Yehuda Yitschak <yehuday@marvell.com>
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/irqdomain.h>
#include <linux/module.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#define PIC_CAUSE 0x0
#define PIC_MASK 0x4
#define PIC_MAX_IRQS 32
#define PIC_MAX_IRQ_MASK ((1UL << PIC_MAX_IRQS) - 1)
struct mvebu_pic {
void __iomem *base;
u32 parent_irq;
struct irq_domain *domain;
struct irq_chip irq_chip;
};
static void mvebu_pic_reset(struct mvebu_pic *pic)
{
/* ACK and mask all interrupts */
writel(0, pic->base + PIC_MASK);
writel(PIC_MAX_IRQ_MASK, pic->base + PIC_CAUSE);
}
static void mvebu_pic_eoi_irq(struct irq_data *d)
{
struct mvebu_pic *pic = irq_data_get_irq_chip_data(d);
writel(1 << d->hwirq, pic->base + PIC_CAUSE);
}
static void mvebu_pic_mask_irq(struct irq_data *d)
{
struct mvebu_pic *pic = irq_data_get_irq_chip_data(d);
u32 reg;
reg = readl(pic->base + PIC_MASK);
reg |= (1 << d->hwirq);
writel(reg, pic->base + PIC_MASK);
}
static void mvebu_pic_unmask_irq(struct irq_data *d)
{
struct mvebu_pic *pic = irq_data_get_irq_chip_data(d);
u32 reg;
reg = readl(pic->base + PIC_MASK);
reg &= ~(1 << d->hwirq);
writel(reg, pic->base + PIC_MASK);
}
static int mvebu_pic_irq_map(struct irq_domain *domain, unsigned int virq,
irq_hw_number_t hwirq)
{
struct mvebu_pic *pic = domain->host_data;
irq_set_percpu_devid(virq);
irq_set_chip_data(virq, pic);
irq_set_chip_and_handler(virq, &pic->irq_chip,
handle_percpu_devid_irq);
irq_set_status_flags(virq, IRQ_LEVEL);
irq_set_probe(virq);
return 0;
}
static const struct irq_domain_ops mvebu_pic_domain_ops = {
.map = mvebu_pic_irq_map,
.xlate = irq_domain_xlate_onecell,
};
static void mvebu_pic_handle_cascade_irq(struct irq_desc *desc)
{
struct mvebu_pic *pic = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
unsigned long irqmap, irqn;
unsigned int cascade_irq;
irqmap = readl_relaxed(pic->base + PIC_CAUSE);
chained_irq_enter(chip, desc);
for_each_set_bit(irqn, &irqmap, BITS_PER_LONG) {
cascade_irq = irq_find_mapping(pic->domain, irqn);
generic_handle_irq(cascade_irq);
}
chained_irq_exit(chip, desc);
}
static void mvebu_pic_enable_percpu_irq(void *data)
{
struct mvebu_pic *pic = data;
mvebu_pic_reset(pic);
enable_percpu_irq(pic->parent_irq, IRQ_TYPE_NONE);
}
static void mvebu_pic_disable_percpu_irq(void *data)
{
struct mvebu_pic *pic = data;
disable_percpu_irq(pic->parent_irq);
}
static int mvebu_pic_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
struct mvebu_pic *pic;
struct irq_chip *irq_chip;
struct resource *res;
pic = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_pic), GFP_KERNEL);
if (!pic)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pic->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(pic->base))
return PTR_ERR(pic->base);
irq_chip = &pic->irq_chip;
irq_chip->name = dev_name(&pdev->dev);
irq_chip->irq_mask = mvebu_pic_mask_irq;
irq_chip->irq_unmask = mvebu_pic_unmask_irq;
irq_chip->irq_eoi = mvebu_pic_eoi_irq;
pic->parent_irq = irq_of_parse_and_map(node, 0);
if (pic->parent_irq <= 0) {
dev_err(&pdev->dev, "Failed to parse parent interrupt\n");
return -EINVAL;
}
pic->domain = irq_domain_add_linear(node, PIC_MAX_IRQS,
&mvebu_pic_domain_ops, pic);
if (!pic->domain) {
dev_err(&pdev->dev, "Failed to allocate irq domain\n");
return -ENOMEM;
}
irq_set_chained_handler(pic->parent_irq, mvebu_pic_handle_cascade_irq);
irq_set_handler_data(pic->parent_irq, pic);
on_each_cpu(mvebu_pic_enable_percpu_irq, pic, 1);
platform_set_drvdata(pdev, pic);
return 0;
}
static int mvebu_pic_remove(struct platform_device *pdev)
{
struct mvebu_pic *pic = platform_get_drvdata(pdev);
on_each_cpu(mvebu_pic_disable_percpu_irq, pic, 1);
irq_domain_remove(pic->domain);
return 0;
}
static const struct of_device_id mvebu_pic_of_match[] = {
{ .compatible = "marvell,armada-8k-pic", },
{},
};
MODULE_DEVICE_TABLE(of, mvebu_pic_of_match);
static struct platform_driver mvebu_pic_driver = {
.probe = mvebu_pic_probe,
.remove = mvebu_pic_remove,
.driver = {
.name = "mvebu-pic",
.of_match_table = mvebu_pic_of_match,
},
};
module_platform_driver(mvebu_pic_driver);
MODULE_AUTHOR("Yehuda Yitschak <yehuday@marvell.com>");
MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:mvebu_pic");
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册