ide: remove ide_dma_enable()

* check ->speedproc return value in ide_tune_dma()
* use ide_tune_dma() in cmd64x/cs5530/sc1200/siimage/sl82c105/scc_pata drivers
* remove no longer needed ide_dma_enable()
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
上级 46cedc9b
......@@ -792,9 +792,10 @@ int ide_tune_dma(ide_drive_t *drive)
if (!speed)
return 0;
drive->hwif->speedproc(drive, speed);
if (drive->hwif->speedproc(drive, speed))
return 0;
return ide_dma_enable(drive);
return 1;
}
EXPORT_SYMBOL_GPL(ide_tune_dma);
......
......@@ -111,18 +111,6 @@ u8 ide_rate_filter(ide_drive_t *drive, u8 speed)
EXPORT_SYMBOL(ide_rate_filter);
int ide_dma_enable (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct hd_driveid *id = drive->id;
return ((int) ((((id->dma_ultra >> 8) & hwif->ultra_mask) ||
((id->dma_mword >> 8) & hwif->mwdma_mask) ||
((id->dma_1word >> 8) & hwif->swdma_mask)) ? 1 : 0));
}
EXPORT_SYMBOL(ide_dma_enable);
int ide_use_fast_pio(ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
......
......@@ -352,22 +352,9 @@ static int cmd64x_tune_chipset (ide_drive_t *drive, u8 speed)
return ide_config_drive_speed(drive, speed);
}
static int config_chipset_for_dma (ide_drive_t *drive)
{
u8 speed = ide_max_dma_mode(drive);
if (!speed)
return 0;
if (cmd64x_tune_chipset(drive, speed))
return 0;
return ide_dma_enable(drive);
}
static int cmd64x_config_drive_for_dma (ide_drive_t *drive)
{
if (ide_use_dma(drive) && config_chipset_for_dma(drive))
if (ide_tune_dma(drive))
return 0;
if (ide_use_fast_pio(drive))
......
......@@ -137,12 +137,8 @@ static u8 cs5530_udma_filter(ide_drive_t *drive)
static int cs5530_config_dma(ide_drive_t *drive)
{
if (ide_use_dma(drive)) {
u8 mode = ide_max_dma_mode(drive);
if (mode && drive->hwif->speedproc(drive, mode) == 0)
return 0;
}
if (ide_tune_dma(drive))
return 0;
return 1;
}
......
......@@ -240,12 +240,8 @@ static int sc1200_tune_chipset(ide_drive_t *drive, u8 mode)
*/
static int sc1200_config_dma (ide_drive_t *drive)
{
if (ide_use_dma(drive)) {
u8 mode = ide_max_dma_mode(drive);
if (mode && drive->hwif->speedproc(drive, mode) == 0)
return 0;
}
if (ide_tune_dma(drive))
return 0;
return 1;
}
......
......@@ -321,26 +321,6 @@ static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed)
return ide_config_drive_speed(drive, speed);
}
/**
* scc_config_chipset_for_dma - configure for DMA
* @drive: drive to configure
*
* Called by scc_config_drive_for_dma().
*/
static int scc_config_chipset_for_dma(ide_drive_t *drive)
{
u8 speed = ide_max_dma_mode(drive);
if (!speed)
return 0;
if (scc_tune_chipset(drive, speed))
return 0;
return ide_dma_enable(drive);
}
/**
* scc_configure_drive_for_dma - set up for DMA transfers
* @drive: drive we are going to set up
......@@ -354,7 +334,7 @@ static int scc_config_chipset_for_dma(ide_drive_t *drive)
static int scc_config_drive_for_dma(ide_drive_t *drive)
{
if (ide_use_dma(drive) && scc_config_chipset_for_dma(drive))
if (ide_tune_dma(drive))
return 0;
if (ide_use_fast_pio(drive))
......
......@@ -374,28 +374,6 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed)
return (ide_config_drive_speed(drive, speed));
}
/**
* config_chipset_for_dma - configure for DMA
* @drive: drive to configure
*
* Called by the IDE layer when it wants the timings set up.
* For the CMD680 we also need to set up the PIO timings and
* enable DMA.
*/
static int config_chipset_for_dma (ide_drive_t *drive)
{
u8 speed = ide_max_dma_mode(drive);
if (!speed)
return 0;
if (siimage_tune_chipset(drive, speed))
return 0;
return ide_dma_enable(drive);
}
/**
* siimage_configure_drive_for_dma - set up for DMA transfers
* @drive: drive we are going to set up
......@@ -408,7 +386,7 @@ static int config_chipset_for_dma (ide_drive_t *drive)
static int siimage_config_drive_for_dma (ide_drive_t *drive)
{
if (ide_use_dma(drive) && config_chipset_for_dma(drive))
if (ide_tune_dma(drive))
return 0;
if (ide_use_fast_pio(drive))
......
......@@ -158,21 +158,6 @@ static int sl82c105_tune_chipset(ide_drive_t *drive, u8 speed)
return ide_config_drive_speed(drive, speed);
}
/*
* Configure the drive for DMA.
*/
static int config_for_dma(ide_drive_t *drive)
{
u8 speed = ide_max_dma_mode(drive);
DBG(("config_for_dma(drive:%s)\n", drive->name));
if (!speed || sl82c105_tune_chipset(drive, speed))
return 0;
return ide_dma_enable(drive);
}
/*
* Check to see if the drive and chipset are capable of DMA mode.
*/
......@@ -180,7 +165,7 @@ static int sl82c105_ide_dma_check(ide_drive_t *drive)
{
DBG(("sl82c105_ide_dma_check(drive:%s)\n", drive->name));
if (ide_use_dma(drive) && config_for_dma(drive))
if (ide_tune_dma(drive))
return 0;
return -1;
......
......@@ -1357,7 +1357,6 @@ static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
/* ide-lib.c */
u8 ide_rate_filter(ide_drive_t *, u8);
extern int ide_dma_enable(ide_drive_t *drive);
extern char *ide_xfer_verbose(u8 xfer_rate);
extern void ide_toggle_bounce(ide_drive_t *drive, int on);
extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册