net: aquantia: Change inefficient wait loop on fw data reads

B1 hardware changes behavior of mailbox interface, it has busy bit
always raised. Data ready condition should be detected by increment
of address register.

Old code has empty `for` loop, and that caused cpu overloads on B1
hardware. aq_nic_service_timer_cb consumed ~100ms because of that.
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c

@@ -21,6 +21,10 @@
 
 #define HW_ATL_UCP_0X370_REG    0x0370U
 
+#define HW_ATL_MIF_CMD          0x0200U
+#define HW_ATL_MIF_ADDR         0x0208U
+#define HW_ATL_MIF_VAL          0x020CU
+
 #define HW_ATL_FW_SM_RAM        0x2U
 #define HW_ATL_MPI_FW_VERSION	0x18
 #define HW_ATL_MPI_CONTROL_ADR  0x0368U
@@ -269,18 +273,22 @@ int hw_atl_utils_fw_downld_dwords(struct aq_hw_s *self, u32 a,
 		}
 	}
 
-	aq_hw_write_reg(self, 0x00000208U, a);
-
-	for (++cnt; --cnt;) {
-		u32 i = 0U;
+	aq_hw_write_reg(self, HW_ATL_MIF_ADDR, a);
 
-		aq_hw_write_reg(self, 0x00000200U, 0x00008000U);
+	for (++cnt; --cnt && !err;) {
+		aq_hw_write_reg(self, HW_ATL_MIF_CMD, 0x00008000U);
 
-		for (i = 1024U;
-			(0x100U & aq_hw_read_reg(self, 0x00000200U)) && --i;) {
-		}
+		if (IS_CHIP_FEATURE(REVISION_B1))
+			AQ_HW_WAIT_FOR(a != aq_hw_read_reg(self,
+							   HW_ATL_MIF_ADDR),
+				       1, 1000U);
+		else
+			AQ_HW_WAIT_FOR(!(0x100 & aq_hw_read_reg(self,
+							   HW_ATL_MIF_CMD)),
+				       1, 1000U);
 
-		*(p++) = aq_hw_read_reg(self, 0x0000020CU);
+		*(p++) = aq_hw_read_reg(self, HW_ATL_MIF_VAL);
+		a += 4;
 	}
 
 	hw_atl_reg_glb_cpu_sem_set(self, 1U, HW_ATL_FW_SM_RAM);
@@ -676,14 +684,18 @@ void hw_atl_utils_hw_chip_features_init(struct aq_hw_s *self, u32 *p)
 	u32 val = hw_atl_reg_glb_mif_id_get(self);
 	u32 mif_rev = val & 0xFFU;
 
-	if ((3U & mif_rev) == 1U) {
-		chip_features |=
-			HAL_ATLANTIC_UTILS_CHIP_REVISION_A0 |
+	if ((0xFU & mif_rev) == 1U) {
+		chip_features |= HAL_ATLANTIC_UTILS_CHIP_REVISION_A0 |
 			HAL_ATLANTIC_UTILS_CHIP_MPI_AQ |
 			HAL_ATLANTIC_UTILS_CHIP_MIPS;
-	} else if ((3U & mif_rev) == 2U) {
-		chip_features |=
-			HAL_ATLANTIC_UTILS_CHIP_REVISION_B0 |
+	} else if ((0xFU & mif_rev) == 2U) {
+		chip_features |= HAL_ATLANTIC_UTILS_CHIP_REVISION_B0 |
+			HAL_ATLANTIC_UTILS_CHIP_MPI_AQ |
+			HAL_ATLANTIC_UTILS_CHIP_MIPS |
+			HAL_ATLANTIC_UTILS_CHIP_TPO2 |
+			HAL_ATLANTIC_UTILS_CHIP_RPF2;
+	} else if ((0xFU & mif_rev) == 0xAU) {
+		chip_features |= HAL_ATLANTIC_UTILS_CHIP_REVISION_B1 |
 			HAL_ATLANTIC_UTILS_CHIP_MPI_AQ |
 			HAL_ATLANTIC_UTILS_CHIP_MIPS |
 			HAL_ATLANTIC_UTILS_CHIP_TPO2 |

drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.h

@@ -161,6 +161,7 @@ struct __packed hw_aq_atl_utils_mbox {
 #define HAL_ATLANTIC_UTILS_CHIP_MPI_AQ       0x00000010U
 #define HAL_ATLANTIC_UTILS_CHIP_REVISION_A0  0x01000000U
 #define HAL_ATLANTIC_UTILS_CHIP_REVISION_B0  0x02000000U
+#define HAL_ATLANTIC_UTILS_CHIP_REVISION_B1  0x04000000U
 
 #define IS_CHIP_FEATURE(_F_) (HAL_ATLANTIC_UTILS_CHIP_##_F_ & \
 	self->chip_features)