USB: serial: simple: add Motorola Tetra driver

Add new Motorola Tetra (simple) driver for Motorola Solutions TETRA PEI
devices.

D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0cad ProdID=9011 Rev=24.16
S:  Manufacturer=Motorola Solutions Inc.
S:  Product=Motorola Solutions TETRA PEI interface
C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)

Note that these devices do not support the CDC SET_CONTROL_LINE_STATE
request (for any interface).
Reported-by: NMax Schulze <max.schulze@posteo.de>
Tested-by: NMax Schulze <max.schulze@posteo.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/serial/Kconfig

@@ -63,6 +63,7 @@ config USB_SERIAL_SIMPLE
 		- Google USB serial devices
 		- HP4x calculators
 		- a number of Motorola phones
+		- Motorola Tetra devices
 		- Novatel Wireless GPS receivers
 		- Siemens USB/MPI adapter.
 		- ViVOtech ViVOpay USB device.

drivers/usb/serial/usb-serial-simple.c

@@ -77,6 +77,11 @@ DEVICE(vivopay, VIVOPAY_IDS);
 	{ USB_DEVICE(0x22b8, 0x2c64) }	/* Motorola V950 phone */
 DEVICE(moto_modem, MOTO_IDS);
 
+/* Motorola Tetra driver */
+#define MOTOROLA_TETRA_IDS()			\
+	{ USB_DEVICE(0x0cad, 0x9011) }	/* Motorola Solutions TETRA PEI */
+DEVICE(motorola_tetra, MOTOROLA_TETRA_IDS);
+
 /* Novatel Wireless GPS driver */
 #define NOVATEL_IDS()			\
 	{ USB_DEVICE(0x09d7, 0x0100) }	/* NovAtel FlexPack GPS */
@@ -107,6 +112,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&google_device,
 	&vivopay_device,
 	&moto_modem_device,
+	&motorola_tetra_device,
 	&novatel_gps_device,
 	&hp4x_device,
 	&suunto_device,
@@ -122,6 +128,7 @@ static const struct usb_device_id id_table[] = {
 	GOOGLE_IDS(),
 	VIVOPAY_IDS(),
 	MOTO_IDS(),
+	MOTOROLA_TETRA_IDS(),
 	NOVATEL_IDS(),
 	HP4X_IDS(),
 	SUUNTO_IDS(),