提交 45e713ef 编写于 作者: L Linus Torvalds

Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  intr_remapping: Fix section mismatch in ir_dev_scope_init()
  intel-iommu: Fix section mismatch in dmar_parse_rmrr_atsr_dev()
  x86, amd: Fix up numa_node information for AMD CPU family 15h model 0-0fh northbridge functions
  x86, AMD: Correct align_va_addr documentation
  x86/rtc, mrst: Don't register a platform RTC device for for Intel MID platforms
  x86/mrst: Battery fixes
  x86/paravirt: PTE updates in k(un)map_atomic need to be synchronous, regardless of lazy_mmu mode
  x86: Fix "Acer Aspire 1" reboot hang
  x86/mtrr: Resolve inconsistency with Intel processor manual
  x86: Document rdmsr_safe restrictions
  x86, microcode: Fix the failure path of microcode update driver init code
  Add TAINT_FIRMWARE_WORKAROUND on MTRR fixup
  x86/mpparse: Account for bus types other than ISA and PCI
  x86, mrst: Change the pmic_gpio device type to IPC
  mrst: Added some platform data for the SFI translations
  x86,mrst: Power control commands update
  x86/reboot: Blacklist Dell OptiPlex 990 known to require PCI reboot
  x86, UV: Fix UV2 hub part number
  x86: Add user_mode_vm check in stack_overflow_check
......@@ -315,8 +315,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
CPU-intensive style benchmark, and it can vary highly in
a microbenchmark depending on workload and compiler.
1: only for 32-bit processes
2: only for 64-bit processes
32: only for 32-bit processes
64: only for 64-bit processes
on: enable for both 32- and 64-bit processes
off: disable for both 32- and 64-bit processes
......
......@@ -3,11 +3,15 @@
#include <linux/notifier.h>
#define IPCMSG_VRTC 0xFA /* Set vRTC device */
/* Command id associated with message IPCMSG_VRTC */
#define IPC_CMD_VRTC_SETTIME 1 /* Set time */
#define IPC_CMD_VRTC_SETALARM 2 /* Set alarm */
#define IPCMSG_WARM_RESET 0xF0
#define IPCMSG_COLD_RESET 0xF1
#define IPCMSG_SOFT_RESET 0xF2
#define IPCMSG_COLD_BOOT 0xF3
#define IPCMSG_VRTC 0xFA /* Set vRTC device */
/* Command id associated with message IPCMSG_VRTC */
#define IPC_CMD_VRTC_SETTIME 1 /* Set time */
#define IPC_CMD_VRTC_SETALARM 2 /* Set alarm */
/* Read single register */
int intel_scu_ipc_ioread8(u16 addr, u8 *data);
......
......@@ -31,11 +31,20 @@ enum mrst_cpu_type {
};
extern enum mrst_cpu_type __mrst_cpu_chip;
#ifdef CONFIG_X86_INTEL_MID
static inline enum mrst_cpu_type mrst_identify_cpu(void)
{
return __mrst_cpu_chip;
}
#else /* !CONFIG_X86_INTEL_MID */
#define mrst_identify_cpu() (0)
#endif /* !CONFIG_X86_INTEL_MID */
enum mrst_timer_options {
MRST_TIMER_DEFAULT,
MRST_TIMER_APBT_ONLY,
......
......@@ -169,7 +169,14 @@ static inline int wrmsr_safe(unsigned msr, unsigned low, unsigned high)
return native_write_msr_safe(msr, low, high);
}
/* rdmsr with exception handling */
/*
* rdmsr with exception handling.
*
* Please note that the exception handling works only after we've
* switched to the "smart" #GP handler in trap_init() which knows about
* exception tables - using this macro earlier than that causes machine
* hangs on boxes which do not implement the @msr in the first argument.
*/
#define rdmsr_safe(msr, p1, p2) \
({ \
int __err; \
......
......@@ -57,6 +57,7 @@
#define UV1_HUB_PART_NUMBER 0x88a5
#define UV2_HUB_PART_NUMBER 0x8eb8
#define UV2_HUB_PART_NUMBER_X 0x1111
/* Compat: if this #define is present, UV headers support UV2 */
#define UV2_HUB_IS_SUPPORTED 1
......
......@@ -93,6 +93,8 @@ static int __init early_get_pnodeid(void)
if (node_id.s.part_number == UV2_HUB_PART_NUMBER)
uv_min_hub_revision_id += UV2_HUB_REVISION_BASE - 1;
if (node_id.s.part_number == UV2_HUB_PART_NUMBER_X)
uv_min_hub_revision_id += UV2_HUB_REVISION_BASE - 1;
uv_hub_info->hub_revision = uv_min_hub_revision_id;
pnode = (node_id.s.node_id >> 1) & ((1 << m_n_config.s.n_skt) - 1);
......
......@@ -547,6 +547,7 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,
if (tmp != mask_lo) {
printk(KERN_WARNING "mtrr: your BIOS has configured an incorrect mask, fixing it.\n");
add_taint(TAINT_FIRMWARE_WORKAROUND);
mask_lo = tmp;
}
}
......@@ -693,6 +694,7 @@ static void prepare_set(void) __acquires(set_atomicity_lock)
/* Disable MTRRs, and set the default type to uncached */
mtrr_wrmsr(MSR_MTRRdefType, deftype_lo & ~0xcff, deftype_hi);
wbinvd();
}
static void post_set(void) __releases(set_atomicity_lock)
......
......@@ -38,6 +38,9 @@ static inline void stack_overflow_check(struct pt_regs *regs)
#ifdef CONFIG_DEBUG_STACKOVERFLOW
u64 curbase = (u64)task_stack_page(current);
if (user_mode_vm(regs))
return;
WARN_ONCE(regs->sp >= curbase &&
regs->sp <= curbase + THREAD_SIZE &&
regs->sp < curbase + sizeof(struct thread_info) +
......
......@@ -256,7 +256,7 @@ static int __init microcode_dev_init(void)
return 0;
}
static void microcode_dev_exit(void)
static void __exit microcode_dev_exit(void)
{
misc_deregister(&microcode_dev);
}
......@@ -519,10 +519,8 @@ static int __init microcode_init(void)
microcode_pdev = platform_device_register_simple("microcode", -1,
NULL, 0);
if (IS_ERR(microcode_pdev)) {
microcode_dev_exit();
if (IS_ERR(microcode_pdev))
return PTR_ERR(microcode_pdev);
}
get_online_cpus();
mutex_lock(&microcode_mutex);
......@@ -532,14 +530,12 @@ static int __init microcode_init(void)
mutex_unlock(&microcode_mutex);
put_online_cpus();
if (error) {
platform_device_unregister(microcode_pdev);
return error;
}
if (error)
goto out_pdev;
error = microcode_dev_init();
if (error)
return error;
goto out_sysdev_driver;
register_syscore_ops(&mc_syscore_ops);
register_hotcpu_notifier(&mc_cpu_notifier);
......@@ -548,6 +544,20 @@ static int __init microcode_init(void)
" <tigran@aivazian.fsnet.co.uk>, Peter Oruba\n");
return 0;
out_sysdev_driver:
get_online_cpus();
mutex_lock(&microcode_mutex);
sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver);
mutex_unlock(&microcode_mutex);
put_online_cpus();
out_pdev:
platform_device_unregister(microcode_pdev);
return error;
}
module_init(microcode_init);
......
......@@ -95,8 +95,8 @@ static void __init MP_bus_info(struct mpc_bus *m)
}
#endif
set_bit(m->busid, mp_bus_not_pci);
if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) {
set_bit(m->busid, mp_bus_not_pci);
#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
mp_bus_id_to_type[m->busid] = MP_BUS_ISA;
#endif
......
......@@ -553,4 +553,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_LINK,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F0,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F1,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F2,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F3,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4,
quirk_amd_nb_node);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F5,
quirk_amd_nb_node);
#endif
......@@ -124,7 +124,7 @@ __setup("reboot=", reboot_setup);
*/
/*
* Some machines require the "reboot=b" commandline option,
* Some machines require the "reboot=b" or "reboot=k" commandline options,
* this quirk makes that automatic.
*/
static int __init set_bios_reboot(const struct dmi_system_id *d)
......@@ -136,6 +136,15 @@ static int __init set_bios_reboot(const struct dmi_system_id *d)
return 0;
}
static int __init set_kbd_reboot(const struct dmi_system_id *d)
{
if (reboot_type != BOOT_KBD) {
reboot_type = BOOT_KBD;
printk(KERN_INFO "%s series board detected. Selecting KBD-method for reboot.\n", d->ident);
}
return 0;
}
static struct dmi_system_id __initdata reboot_dmi_table[] = {
{ /* Handle problems with rebooting on Dell E520's */
.callback = set_bios_reboot,
......@@ -295,7 +304,7 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
},
},
{ /* Handle reboot issue on Acer Aspire one */
.callback = set_bios_reboot,
.callback = set_kbd_reboot,
.ident = "Acer Aspire One A110",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
......@@ -443,6 +452,14 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6420"),
},
},
{ /* Handle problems with rebooting on the OptiPlex 990. */
.callback = set_pci_reboot,
.ident = "Dell OptiPlex 990",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"),
},
},
{ }
};
......
......@@ -12,6 +12,7 @@
#include <asm/vsyscall.h>
#include <asm/x86_init.h>
#include <asm/time.h>
#include <asm/mrst.h>
#ifdef CONFIG_X86_32
/*
......@@ -242,6 +243,10 @@ static __init int add_rtc_cmos(void)
if (of_have_populated_dt())
return 0;
/* Intel MID platforms don't have ioport rtc */
if (mrst_identify_cpu())
return -ENODEV;
platform_device_register(&rtc_device);
dev_info(&rtc_device.dev,
"registered platform RTC device (no PNP device found)\n");
......
......@@ -45,6 +45,7 @@ void *kmap_atomic_prot(struct page *page, pgprot_t prot)
vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
BUG_ON(!pte_none(*(kmap_pte-idx)));
set_pte(kmap_pte-idx, mk_pte(page, prot));
arch_flush_lazy_mmu_mode();
return (void *)vaddr;
}
......@@ -88,6 +89,7 @@ void __kunmap_atomic(void *kvaddr)
*/
kpte_clear_flush(kmap_pte-idx, vaddr);
kmap_atomic_idx_pop();
arch_flush_lazy_mmu_mode();
}
#ifdef CONFIG_DEBUG_HIGHMEM
else {
......
......@@ -76,6 +76,20 @@ struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
EXPORT_SYMBOL_GPL(sfi_mrtc_array);
int sfi_mrtc_num;
static void mrst_power_off(void)
{
if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT)
intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 1);
}
static void mrst_reboot(void)
{
if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT)
intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 0);
else
intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
}
/* parse all the mtimer info to a static mtimer array */
static int __init sfi_parse_mtmr(struct sfi_table_header *table)
{
......@@ -265,17 +279,6 @@ static int mrst_i8042_detect(void)
return 0;
}
/* Reboot and power off are handled by the SCU on a MID device */
static void mrst_power_off(void)
{
intel_scu_ipc_simple_command(0xf1, 1);
}
static void mrst_reboot(void)
{
intel_scu_ipc_simple_command(0xf1, 0);
}
/*
* Moorestown does not have external NMI source nor port 0x61 to report
* NMI status. The possible NMI sources are from pmu as a result of NMI
......@@ -484,6 +487,46 @@ static void __init *max7315_platform_data(void *info)
return max7315;
}
static void *tca6416_platform_data(void *info)
{
static struct pca953x_platform_data tca6416;
struct i2c_board_info *i2c_info = info;
int gpio_base, intr;
char base_pin_name[SFI_NAME_LEN + 1];
char intr_pin_name[SFI_NAME_LEN + 1];
strcpy(i2c_info->type, "tca6416");
strcpy(base_pin_name, "tca6416_base");
strcpy(intr_pin_name, "tca6416_int");
gpio_base = get_gpio_by_name(base_pin_name);
intr = get_gpio_by_name(intr_pin_name);
if (gpio_base == -1)
return NULL;
tca6416.gpio_base = gpio_base;
if (intr != -1) {
i2c_info->irq = intr + MRST_IRQ_OFFSET;
tca6416.irq_base = gpio_base + MRST_IRQ_OFFSET;
} else {
i2c_info->irq = -1;
tca6416.irq_base = -1;
}
return &tca6416;
}
static void *mpu3050_platform_data(void *info)
{
struct i2c_board_info *i2c_info = info;
int intr = get_gpio_by_name("mpu3050_int");
if (intr == -1)
return NULL;
i2c_info->irq = intr + MRST_IRQ_OFFSET;
return NULL;
}
static void __init *emc1403_platform_data(void *info)
{
static short intr2nd_pdata;
......@@ -646,12 +689,15 @@ static void *msic_ocd_platform_data(void *info)
static const struct devs_id __initconst device_ids[] = {
{"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data},
{"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data},
{"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data},
{"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data},
{"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
{"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
{"tca6416", SFI_DEV_TYPE_I2C, 1, &tca6416_platform_data},
{"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data},
{"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data},
{"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
{"mpu3050", SFI_DEV_TYPE_I2C, 1, &mpu3050_platform_data},
/* MSIC subdevices */
{"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data},
......
......@@ -3524,7 +3524,7 @@ int dmar_find_matched_atsr_unit(struct pci_dev *dev)
return 0;
}
int dmar_parse_rmrr_atsr_dev(void)
int __init dmar_parse_rmrr_atsr_dev(void)
{
struct dmar_rmrr_unit *rmrr, *rmrr_n;
struct dmar_atsr_unit *atsr, *atsr_n;
......
......@@ -773,7 +773,7 @@ int __init parse_ioapics_under_ir(void)
return ir_supported;
}
int ir_dev_scope_init(void)
int __init ir_dev_scope_init(void)
{
if (!intr_remapping_enabled)
return 0;
......
......@@ -61,7 +61,8 @@ MODULE_PARM_DESC(debug, "Flag to enable PMIC Battery debug messages.");
#define PMIC_BATT_CHR_SBATDET_MASK (1 << 5)
#define PMIC_BATT_CHR_SDCLMT_MASK (1 << 6)
#define PMIC_BATT_CHR_SUSBOVP_MASK (1 << 7)
#define PMIC_BATT_CHR_EXCPT_MASK 0xC6
#define PMIC_BATT_CHR_EXCPT_MASK 0x86
#define PMIC_BATT_ADC_ACCCHRG_MASK (1 << 31)
#define PMIC_BATT_ADC_ACCCHRGVAL_MASK 0x7FFFFFFF
......@@ -304,11 +305,6 @@ static void pmic_battery_read_status(struct pmic_power_module_info *pbi)
pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
pmic_battery_log_event(BATT_EVENT_BATOVP_EXCPT);
batt_exception = 1;
} else if (r8 & PMIC_BATT_CHR_SDCLMT_MASK) {
pbi->batt_health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
pmic_battery_log_event(BATT_EVENT_DCLMT_EXCPT);
batt_exception = 1;
} else if (r8 & PMIC_BATT_CHR_STEMP_MASK) {
pbi->batt_health = POWER_SUPPLY_HEALTH_OVERHEAT;
pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
......@@ -316,6 +312,10 @@ static void pmic_battery_read_status(struct pmic_power_module_info *pbi)
batt_exception = 1;
} else {
pbi->batt_health = POWER_SUPPLY_HEALTH_GOOD;
if (r8 & PMIC_BATT_CHR_SDCLMT_MASK) {
/* PMIC will change charging current automatically */
pmic_battery_log_event(BATT_EVENT_DCLMT_EXCPT);
}
}
}
......
......@@ -517,8 +517,12 @@
#define PCI_DEVICE_ID_AMD_11H_NB_DRAM 0x1302
#define PCI_DEVICE_ID_AMD_11H_NB_MISC 0x1303
#define PCI_DEVICE_ID_AMD_11H_NB_LINK 0x1304
#define PCI_DEVICE_ID_AMD_15H_NB_F0 0x1600
#define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601
#define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602
#define PCI_DEVICE_ID_AMD_15H_NB_F3 0x1603
#define PCI_DEVICE_ID_AMD_15H_NB_F4 0x1604
#define PCI_DEVICE_ID_AMD_15H_NB_F5 0x1605
#define PCI_DEVICE_ID_AMD_CNB17H_F3 0x1703
#define PCI_DEVICE_ID_AMD_LANCE 0x2000
#define PCI_DEVICE_ID_AMD_LANCE_HOME 0x2001
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册