提交 45ae4df9 编写于 作者: L Linus Torvalds

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:

 - Fix interrupt type on ethernet switch for i.MX-based RDU2

 - GPC on i.MX exposed too large a register window which resulted in
   userspace being able to crash the machine.

 - Fixup of bad merge resolution moving GPIO DT nodes under pinctrl on
   droid4.

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: imx6: RDU2: fix irq type for mv88e6xxx switch
  soc: imx: gpc: restrict register range for regmap access
  ARM: dts: omap4-droid4: fix dts w.r.t. pwm
...@@ -692,7 +692,7 @@ ...@@ -692,7 +692,7 @@
dsa,member = <0 0>; dsa,member = <0 0>;
eeprom-length = <512>; eeprom-length = <512>;
interrupt-parent = <&gpio6>; interrupt-parent = <&gpio6>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
......
...@@ -159,13 +159,7 @@ ...@@ -159,13 +159,7 @@
dais = <&mcbsp2_port>, <&mcbsp3_port>; dais = <&mcbsp2_port>, <&mcbsp3_port>;
}; };
};
&dss {
status = "okay";
};
&gpio6 {
pwm8: dmtimer-pwm-8 { pwm8: dmtimer-pwm-8 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&vibrator_direction_pin>; pinctrl-0 = <&vibrator_direction_pin>;
...@@ -192,7 +186,10 @@ ...@@ -192,7 +186,10 @@
pwm-names = "enable", "direction"; pwm-names = "enable", "direction";
direction-duty-cycle-ns = <10000000>; direction-duty-cycle-ns = <10000000>;
}; };
};
&dss {
status = "okay";
}; };
&dsi1 { &dsi1 {
......
...@@ -27,9 +27,16 @@ ...@@ -27,9 +27,16 @@
#define GPC_PGC_SW2ISO_SHIFT 0x8 #define GPC_PGC_SW2ISO_SHIFT 0x8
#define GPC_PGC_SW_SHIFT 0x0 #define GPC_PGC_SW_SHIFT 0x0
#define GPC_PGC_PCI_PDN 0x200
#define GPC_PGC_PCI_SR 0x20c
#define GPC_PGC_GPU_PDN 0x260 #define GPC_PGC_GPU_PDN 0x260
#define GPC_PGC_GPU_PUPSCR 0x264 #define GPC_PGC_GPU_PUPSCR 0x264
#define GPC_PGC_GPU_PDNSCR 0x268 #define GPC_PGC_GPU_PDNSCR 0x268
#define GPC_PGC_GPU_SR 0x26c
#define GPC_PGC_DISP_PDN 0x240
#define GPC_PGC_DISP_SR 0x24c
#define GPU_VPU_PUP_REQ BIT(1) #define GPU_VPU_PUP_REQ BIT(1)
#define GPU_VPU_PDN_REQ BIT(0) #define GPU_VPU_PDN_REQ BIT(0)
...@@ -318,10 +325,24 @@ static const struct of_device_id imx_gpc_dt_ids[] = { ...@@ -318,10 +325,24 @@ static const struct of_device_id imx_gpc_dt_ids[] = {
{ } { }
}; };
static const struct regmap_range yes_ranges[] = {
regmap_reg_range(GPC_CNTR, GPC_CNTR),
regmap_reg_range(GPC_PGC_PCI_PDN, GPC_PGC_PCI_SR),
regmap_reg_range(GPC_PGC_GPU_PDN, GPC_PGC_GPU_SR),
regmap_reg_range(GPC_PGC_DISP_PDN, GPC_PGC_DISP_SR),
};
static const struct regmap_access_table access_table = {
.yes_ranges = yes_ranges,
.n_yes_ranges = ARRAY_SIZE(yes_ranges),
};
static const struct regmap_config imx_gpc_regmap_config = { static const struct regmap_config imx_gpc_regmap_config = {
.reg_bits = 32, .reg_bits = 32,
.val_bits = 32, .val_bits = 32,
.reg_stride = 4, .reg_stride = 4,
.rd_table = &access_table,
.wr_table = &access_table,
.max_register = 0x2ac, .max_register = 0x2ac,
}; };
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册