Revert "tty: serial: imx.c: Reset UART before activating interrupts"

This reverts commit e95044ba.

Commit e95044ba ("tty: serial: imx.c: Reset UART before activating
interrupts") terribly messes up with the console on mx6 boards, so
let's revert it.
Reported-by: Nkernelci.org bot <bot@kernelci.org>
Cc: David Jander <david@protonic.nl>
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/imx.c

@@ -1098,23 +1098,10 @@ static void imx_disable_dma(struct imx_port *sport)
 /* half the RX buffer size */
 #define CTSTL 16
 
-static inline void imx_reset(struct imx_port *sport)
-{
-	int i = 100;
-	unsigned long temp;
-
-	temp = readl(sport->port.membase + UCR2);
-	temp &= ~UCR2_SRST;
-	writel(temp, sport->port.membase + UCR2);
-
-	while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && (--i > 0))
-		udelay(1);
-}
-
 static int imx_startup(struct uart_port *port)
 {
 	struct imx_port *sport = (struct imx_port *)port;
-	int retval;
+	int retval, i;
 	unsigned long flags, temp;
 
 	retval = clk_prepare_enable(sport->clk_per);
@@ -1141,7 +1128,14 @@ static int imx_startup(struct uart_port *port)
 
 	spin_lock_irqsave(&sport->port.lock, flags);
 	/* Reset fifo's and state machines */
-	imx_reset(sport);
+	i = 100;
+
+	temp = readl(sport->port.membase + UCR2);
+	temp &= ~UCR2_SRST;
+	writel(temp, sport->port.membase + UCR2);
+
+	while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && (--i > 0))
+		udelay(1);
 
 	/*
 	 * Finally, clear and enable interrupts
@@ -1980,14 +1974,6 @@ static int serial_imx_probe(struct platform_device *pdev)
 
 	clk_disable_unprepare(sport->clk_ipg);
 
-	/*
-	 * Perform a complete reset of the UART device. Needed if we don't
-	 * come straight out of reset.
-	 */
-	writel(0, sport->port.membase + UCR2);
-	writel(0, sport->port.membase + UCR1);
-	imx_reset(sport);
-
 	/*
 	 * Allocate the IRQ(s) i.MX1 has three interrupts whereas later
 	 * chips only have one interrupt.