Merge git://git.infradead.org/battery-2.6

* git://git.infradead.org/battery-2.6:
  power_supply: Makefile cleanup
  bq27x00_battery: Add missing kfree(di->bus) in bq27x00_battery_remove()
  power_supply: Introduce maximum current property
  power_supply: Add types for USB chargers
  ds2782_battery: Fix units
  power_supply: Add driver for TWL4030/TPS65950 BCI charger
  bq20z75: Add support for more power supply properties
  wm831x_power: Add missing kfree(wm831x_power) in wm831x_power_remove()
  jz4740-battery: Add missing kfree(jz_battery) in jz_battery_remove()
  ds2760_battery: Add missing kfree(di) in ds2760_battery_remove()
  olpc_battery: Fix endian neutral breakage for s16 values
  ds2760_battery: Fix W1 and W1_SLAVE_DS2760 dependency
  pcf50633-charger: Add missing sysfs_remove_group()
  power_supply: Add driver for TI BQ20Z75 gas gauge IC
  wm831x_power: Remove duplicate chg mask
  omap: rx51: Add support for USB chargers
  power_supply: Add isp1704 charger detection driver

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -107,6 +107,10 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
 	},
 };
 
+static struct platform_device rx51_charger_device = {
+	.name = "isp1704_charger",
+};
+
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 
 #define RX51_GPIO_CAMERA_LENS_COVER	110
@@ -919,5 +923,6 @@ void __init rx51_peripherals_init(void)
 	spi_register_board_info(rx51_peripherals_spi_board_info,
 				ARRAY_SIZE(rx51_peripherals_spi_board_info));
 	omap2_hsmmc_init(mmc);
+	platform_device_register(&rx51_charger_device);
 }
 

drivers/power/Kconfig

@@ -64,8 +64,7 @@ config TEST_POWER
 
 config BATTERY_DS2760
 	tristate "DS2760 battery driver (HP iPAQ & others)"
-	select W1
-	select W1_SLAVE_DS2760
+	depends on W1 && W1_SLAVE_DS2760
 	help
 	  Say Y here to enable support for batteries with ds2760 chip.
 
@@ -109,6 +108,13 @@ config BATTERY_WM97XX
 	help
 	  Say Y to enable support for battery measured by WM97xx aux port.
 
+config BATTERY_BQ20Z75
+        tristate "TI BQ20z75 gas gauge"
+        depends on I2C
+        help
+         Say Y to include support for TI BQ20z75 SBS-compliant
+         gas gauge and protection IC.
+
 config BATTERY_BQ27x00
 	tristate "BQ27x00 battery driver"
 	depends on I2C
@@ -166,4 +172,17 @@ config BATTERY_INTEL_MID
 	  Say Y here to enable the battery driver on Intel MID
 	  platforms.
 
+config CHARGER_ISP1704
+	tristate "ISP1704 USB Charger Detection"
+	depends on USB_OTG_UTILS
+	help
+	  Say Y to enable support for USB Charger Detection with
+	  ISP1707/ISP1704 USB transceivers.
+
+config CHARGER_TWL4030
+	tristate "OMAP TWL4030 BCI charger driver"
+	depends on TWL4030_CORE
+	help
+	  Say Y here to enable support for TWL4030 Battery Charge Interface.
+
 endif # POWER_SUPPLY

drivers/power/Makefile

-power_supply-objs := power_supply_core.o
+ccflags-$(CONFIG_POWER_SUPPLY_DEBUG) := -DDEBUG
 
-ifeq ($(CONFIG_SYSFS),y)
-power_supply-objs += power_supply_sysfs.o
-endif
-
-ifeq ($(CONFIG_LEDS_TRIGGERS),y)
-power_supply-objs += power_supply_leds.o
-endif
-
-ifeq ($(CONFIG_POWER_SUPPLY_DEBUG),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
+power_supply-y				:= power_supply_core.o
+power_supply-$(CONFIG_SYSFS)		+= power_supply_sysfs.o
+power_supply-$(CONFIG_LEDS_TRIGGERS)	+= power_supply_leds.o
 
 obj-$(CONFIG_POWER_SUPPLY)	+= power_supply.o
 
@@ -29,6 +21,7 @@ obj-$(CONFIG_BATTERY_OLPC)	+= olpc_battery.o
 obj-$(CONFIG_BATTERY_TOSA)	+= tosa_battery.o
 obj-$(CONFIG_BATTERY_COLLIE)	+= collie_battery.o
 obj-$(CONFIG_BATTERY_WM97XX)	+= wm97xx_battery.o
+obj-$(CONFIG_BATTERY_BQ20Z75)	+= bq20z75.o
 obj-$(CONFIG_BATTERY_BQ27x00)	+= bq27x00_battery.o
 obj-$(CONFIG_BATTERY_DA9030)	+= da9030_battery.o
 obj-$(CONFIG_BATTERY_MAX17040)	+= max17040_battery.o
@@ -37,3 +30,5 @@ obj-$(CONFIG_BATTERY_S3C_ADC)	+= s3c_adc_battery.o
 obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
 obj-$(CONFIG_BATTERY_JZ4740)	+= jz4740-battery.o
 obj-$(CONFIG_BATTERY_INTEL_MID)	+= intel_mid_battery.o
+obj-$(CONFIG_CHARGER_ISP1704)	+= isp1704_charger.o
+obj-$(CONFIG_CHARGER_TWL4030)	+= twl4030_charger.o

drivers/power/bq20z75.c

+/*
+ * Gas Gauge driver for TI's BQ20Z75
+ *
+ * Copyright (c) 2010, NVIDIA Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/power_supply.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+
+enum {
+	REG_MANUFACTURER_DATA,
+	REG_TEMPERATURE,
+	REG_VOLTAGE,
+	REG_CURRENT,
+	REG_CAPACITY,
+	REG_TIME_TO_EMPTY,
+	REG_TIME_TO_FULL,
+	REG_STATUS,
+	REG_CYCLE_COUNT,
+	REG_SERIAL_NUMBER,
+	REG_REMAINING_CAPACITY,
+	REG_FULL_CHARGE_CAPACITY,
+	REG_DESIGN_CAPACITY,
+	REG_DESIGN_VOLTAGE,
+};
+
+/* manufacturer access defines */
+#define MANUFACTURER_ACCESS_STATUS	0x0006
+#define MANUFACTURER_ACCESS_SLEEP	0x0011
+
+/* battery status value bits */
+#define BATTERY_DISCHARGING		0x40
+#define BATTERY_FULL_CHARGED		0x20
+#define BATTERY_FULL_DISCHARGED		0x10
+
+#define BQ20Z75_DATA(_psp, _addr, _min_value, _max_value) { \
+	.psp = _psp, \
+	.addr = _addr, \
+	.min_value = _min_value, \
+	.max_value = _max_value, \
+}
+
+static const struct bq20z75_device_data {
+	enum power_supply_property psp;
+	u8 addr;
+	int min_value;
+	int max_value;
+} bq20z75_data[] = {
+	[REG_MANUFACTURER_DATA] =
+		BQ20Z75_DATA(POWER_SUPPLY_PROP_PRESENT, 0x00, 0, 65535),
+	[REG_TEMPERATURE] =
+		BQ20Z75_DATA(POWER_SUPPLY_PROP_TEMP, 0x08, 0, 65535),
+	[REG_VOLTAGE] =
+		BQ20Z75_DATA(POWER_SUPPLY_PROP_VOLTAGE_NOW, 0x09, 0, 20000),
+	[REG_CURRENT] =
+		BQ20Z75_DATA(POWER_SUPPLY_PROP_CURRENT_NOW, 0x0A, -32768,
+			32767),
+	[REG_CAPACITY] =
+		BQ20Z75_DATA(POWER_SUPPLY_PROP_CAPACITY, 0x0E, 0, 100),
+	[REG_REMAINING_CAPACITY] =
+		BQ20Z75_DATA(POWER_SUPPLY_PROP_ENERGY_NOW, 0x0F, 0, 65535),
+	[REG_FULL_CHARGE_CAPACITY] =
+		BQ20Z75_DATA(POWER_SUPPLY_PROP_ENERGY_FULL, 0x10, 0, 65535),
+	[REG_TIME_TO_EMPTY] =
+		BQ20Z75_DATA(POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, 0x12, 0,
+			65535),
+	[REG_TIME_TO_FULL] =
+		BQ20Z75_DATA(POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, 0x13, 0,
+			65535),
+	[REG_STATUS] =
+		BQ20Z75_DATA(POWER_SUPPLY_PROP_STATUS, 0x16, 0, 65535),
+	[REG_CYCLE_COUNT] =
+		BQ20Z75_DATA(POWER_SUPPLY_PROP_CYCLE_COUNT, 0x17, 0, 65535),
+	[REG_DESIGN_CAPACITY] =
+		BQ20Z75_DATA(POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, 0x18, 0,
+			65535),
+	[REG_DESIGN_VOLTAGE] =
+		BQ20Z75_DATA(POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, 0x19, 0,
+			65535),
+	[REG_SERIAL_NUMBER] =
+		BQ20Z75_DATA(POWER_SUPPLY_PROP_SERIAL_NUMBER, 0x1C, 0, 65535),
+};
+
+static enum power_supply_property bq20z75_properties[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
+	POWER_SUPPLY_PROP_SERIAL_NUMBER,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_ENERGY_NOW,
+	POWER_SUPPLY_PROP_ENERGY_FULL,
+	POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
+};
+
+struct bq20z75_info {
+	struct i2c_client	*client;
+	struct power_supply	power_supply;
+};
+
+static int bq20z75_read_word_data(struct i2c_client *client, u8 address)
+{
+	s32 ret;
+
+	ret = i2c_smbus_read_word_data(client, address);
+	if (ret < 0) {
+		dev_err(&client->dev,
+			"%s: i2c read at address 0x%x failed\n",
+			__func__, address);
+		return ret;
+	}
+	return le16_to_cpu(ret);
+}
+
+static int bq20z75_write_word_data(struct i2c_client *client, u8 address,
+	u16 value)
+{
+	s32 ret;
+
+	ret = i2c_smbus_write_word_data(client, address, le16_to_cpu(value));
+	if (ret < 0) {
+		dev_err(&client->dev,
+			"%s: i2c write to address 0x%x failed\n",
+			__func__, address);
+		return ret;
+	}
+	return 0;
+}
+
+static int bq20z75_get_battery_presence_and_health(
+	struct i2c_client *client, enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	s32 ret;
+
+	/* Write to ManufacturerAccess with
+	 * ManufacturerAccess command and then
+	 * read the status */
+	ret = bq20z75_write_word_data(client,
+		bq20z75_data[REG_MANUFACTURER_DATA].addr,
+		MANUFACTURER_ACCESS_STATUS);
+	if (ret < 0)
+		return ret;
+
+
+	ret = bq20z75_read_word_data(client,
+		bq20z75_data[REG_MANUFACTURER_DATA].addr);
+	if (ret < 0)
+		return ret;
+
+	if (ret < bq20z75_data[REG_MANUFACTURER_DATA].min_value ||
+	    ret > bq20z75_data[REG_MANUFACTURER_DATA].max_value) {
+		val->intval = 0;
+		return 0;
+	}
+
+	/* Mask the upper nibble of 2nd byte and
+	 * lower byte of response then
+	 * shift the result by 8 to get status*/
+	ret &= 0x0F00;
+	ret >>= 8;
+	if (psp == POWER_SUPPLY_PROP_PRESENT) {
+		if (ret == 0x0F)
+			/* battery removed */
+			val->intval = 0;
+		else
+			val->intval = 1;
+	} else if (psp == POWER_SUPPLY_PROP_HEALTH) {
+		if (ret == 0x09)
+			val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		else if (ret == 0x0B)
+			val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+		else if (ret == 0x0C)
+			val->intval = POWER_SUPPLY_HEALTH_DEAD;
+		else
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+	}
+
+	return 0;
+}
+
+static int bq20z75_get_battery_property(struct i2c_client *client,
+	int reg_offset, enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	s32 ret;
+
+	ret = bq20z75_read_word_data(client,
+		bq20z75_data[reg_offset].addr);
+	if (ret < 0)
+		return ret;
+
+	/* returned values are 16 bit */
+	if (bq20z75_data[reg_offset].min_value < 0)
+		ret = (s16)ret;
+
+	if (ret >= bq20z75_data[reg_offset].min_value &&
+	    ret <= bq20z75_data[reg_offset].max_value) {
+		val->intval = ret;
+		if (psp == POWER_SUPPLY_PROP_STATUS) {
+			if (ret & BATTERY_FULL_CHARGED)
+				val->intval = POWER_SUPPLY_STATUS_FULL;
+			else if (ret & BATTERY_FULL_DISCHARGED)
+				val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			else if (ret & BATTERY_DISCHARGING)
+				val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+			else
+				val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		}
+	} else {
+		if (psp == POWER_SUPPLY_PROP_STATUS)
+			val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+		else
+			val->intval = 0;
+	}
+
+	return 0;
+}
+
+static void  bq20z75_unit_adjustment(struct i2c_client *client,
+	enum power_supply_property psp, union power_supply_propval *val)
+{
+#define BASE_UNIT_CONVERSION		1000
+#define BATTERY_MODE_CAP_MULT_WATT	(10 * BASE_UNIT_CONVERSION)
+#define TIME_UNIT_CONVERSION		600
+#define TEMP_KELVIN_TO_CELCIUS		2731
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ENERGY_NOW:
+	case POWER_SUPPLY_PROP_ENERGY_FULL:
+	case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
+		val->intval *= BATTERY_MODE_CAP_MULT_WATT;
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		val->intval *= BASE_UNIT_CONVERSION;
+		break;
+
+	case POWER_SUPPLY_PROP_TEMP:
+		/* bq20z75 provides battery tempreture in 0.1°K
+		 * so convert it to 0.1°C */
+		val->intval -= TEMP_KELVIN_TO_CELCIUS;
+		val->intval *= 10;
+		break;
+
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+	case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
+		val->intval *= TIME_UNIT_CONVERSION;
+		break;
+
+	default:
+		dev_dbg(&client->dev,
+			"%s: no need for unit conversion %d\n", __func__, psp);
+	}
+}
+
+static int bq20z75_get_battery_capacity(struct i2c_client *client,
+	int reg_offset, enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	s32 ret;
+
+	ret = bq20z75_read_word_data(client, bq20z75_data[reg_offset].addr);
+	if (ret < 0)
+		return ret;
+
+	if (psp == POWER_SUPPLY_PROP_CAPACITY) {
+		/* bq20z75 spec says that this can be >100 %
+		* even if max value is 100 % */
+		val->intval = min(ret, 100);
+	} else
+		val->intval = ret;
+
+	return 0;
+}
+
+static char bq20z75_serial[5];
+static int bq20z75_get_battery_serial_number(struct i2c_client *client,
+	union power_supply_propval *val)
+{
+	int ret;
+
+	ret = bq20z75_read_word_data(client,
+		bq20z75_data[REG_SERIAL_NUMBER].addr);
+	if (ret < 0)
+		return ret;
+
+	ret = sprintf(bq20z75_serial, "%04x", ret);
+	val->strval = bq20z75_serial;
+
+	return 0;
+}
+
+static int bq20z75_get_property(struct power_supply *psy,
+	enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	int count;
+	int ret;
+	struct bq20z75_info *bq20z75_device = container_of(psy,
+				struct bq20z75_info, power_supply);
+	struct i2c_client *client = bq20z75_device->client;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_PRESENT:
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = bq20z75_get_battery_presence_and_health(client, psp, val);
+		if (ret)
+			return ret;
+		break;
+
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		break;
+
+	case POWER_SUPPLY_PROP_ENERGY_NOW:
+	case POWER_SUPPLY_PROP_ENERGY_FULL:
+	case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
+	case POWER_SUPPLY_PROP_CAPACITY:
+		for (count = 0; count < ARRAY_SIZE(bq20z75_data); count++) {
+			if (psp == bq20z75_data[count].psp)
+				break;
+		}
+
+		ret = bq20z75_get_battery_capacity(client, count, psp, val);
+		if (ret)
+			return ret;
+
+		break;
+
+	case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+		ret = bq20z75_get_battery_serial_number(client, val);
+		if (ret)
+			return ret;
+		break;
+
+	case POWER_SUPPLY_PROP_STATUS:
+	case POWER_SUPPLY_PROP_CYCLE_COUNT:
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+	case POWER_SUPPLY_PROP_TEMP:
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+	case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		for (count = 0; count < ARRAY_SIZE(bq20z75_data); count++) {
+			if (psp == bq20z75_data[count].psp)
+				break;
+		}
+
+		ret = bq20z75_get_battery_property(client, count, psp, val);
+		if (ret)
+			return ret;
+
+		break;
+
+	default:
+		dev_err(&client->dev,
+			"%s: INVALID property\n", __func__);
+		return -EINVAL;
+	}
+
+	/* Convert units to match requirements for power supply class */
+	bq20z75_unit_adjustment(client, psp, val);
+
+	dev_dbg(&client->dev,
+		"%s: property = %d, value = %d\n", __func__, psp, val->intval);
+
+	return 0;
+}
+
+static int bq20z75_probe(struct i2c_client *client,
+	const struct i2c_device_id *id)
+{
+	struct bq20z75_info *bq20z75_device;
+	int rc;
+
+	bq20z75_device = kzalloc(sizeof(struct bq20z75_info), GFP_KERNEL);
+	if (!bq20z75_device)
+		return -ENOMEM;
+
+	bq20z75_device->client = client;
+	bq20z75_device->power_supply.name = "battery";
+	bq20z75_device->power_supply.type = POWER_SUPPLY_TYPE_BATTERY;
+	bq20z75_device->power_supply.properties = bq20z75_properties;
+	bq20z75_device->power_supply.num_properties =
+		ARRAY_SIZE(bq20z75_properties);
+	bq20z75_device->power_supply.get_property = bq20z75_get_property;
+
+	i2c_set_clientdata(client, bq20z75_device);
+
+	rc = power_supply_register(&client->dev, &bq20z75_device->power_supply);
+	if (rc) {
+		dev_err(&client->dev,
+			"%s: Failed to register power supply\n", __func__);
+		kfree(bq20z75_device);
+		return rc;
+	}
+
+	dev_info(&client->dev,
+		"%s: battery gas gauge device registered\n", client->name);
+
+	return 0;
+}
+
+static int bq20z75_remove(struct i2c_client *client)
+{
+	struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client);
+
+	power_supply_unregister(&bq20z75_device->power_supply);
+	kfree(bq20z75_device);
+	bq20z75_device = NULL;
+
+	return 0;
+}
+
+#if defined CONFIG_PM
+static int bq20z75_suspend(struct i2c_client *client,
+	pm_message_t state)
+{
+	s32 ret;
+
+	/* write to manufacturer access with sleep command */
+	ret = bq20z75_write_word_data(client,
+		bq20z75_data[REG_MANUFACTURER_DATA].addr,
+		MANUFACTURER_ACCESS_SLEEP);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+#else
+#define bq20z75_suspend		NULL
+#endif
+/* any smbus transaction will wake up bq20z75 */
+#define bq20z75_resume		NULL
+
+static const struct i2c_device_id bq20z75_id[] = {
+	{ "bq20z75", 0 },
+	{}
+};
+
+static struct i2c_driver bq20z75_battery_driver = {
+	.probe		= bq20z75_probe,
+	.remove		= bq20z75_remove,
+	.suspend	= bq20z75_suspend,
+	.resume		= bq20z75_resume,
+	.id_table	= bq20z75_id,
+	.driver = {
+		.name	= "bq20z75-battery",
+	},
+};
+
+static int __init bq20z75_battery_init(void)
+{
+	return i2c_add_driver(&bq20z75_battery_driver);
+}
+module_init(bq20z75_battery_init);
+
+static void __exit bq20z75_battery_exit(void)
+{
+	i2c_del_driver(&bq20z75_battery_driver);
+}
+module_exit(bq20z75_battery_exit);
+
+MODULE_DESCRIPTION("BQ20z75 battery monitor driver");
+MODULE_LICENSE("GPL");

drivers/power/bq27x00_battery.c

@@ -418,6 +418,7 @@ static int bq27x00_battery_remove(struct i2c_client *client)
 
 	power_supply_unregister(&di->bat);
 
+	kfree(di->bus);
 	kfree(di->bat.name);
 
 	mutex_lock(&battery_mutex);

drivers/power/ds2760_battery.c

@@ -586,6 +586,7 @@ static int ds2760_battery_remove(struct platform_device *pdev)
 					  &di->set_charged_work);
 	destroy_workqueue(di->monitor_wqueue);
 	power_supply_unregister(&di->bat);
+	kfree(di);
 
 	return 0;
 }

drivers/power/ds2782_battery.c

@@ -44,8 +44,8 @@ struct ds278x_info;
 
 struct ds278x_battery_ops {
 	int (*get_battery_current)(struct ds278x_info *info, int *current_uA);
-	int (*get_battery_voltage)(struct ds278x_info *info, int *voltage_uA);
-	int (*get_battery_capacity)(struct ds278x_info *info, int *capacity_uA);
+	int (*get_battery_voltage)(struct ds278x_info *info, int *voltage_uV);
+	int (*get_battery_capacity)(struct ds278x_info *info, int *capacity);
 };
 
 #define to_ds278x_info(x) container_of(x, struct ds278x_info, battery)
@@ -137,7 +137,7 @@ static int ds2782_get_current(struct ds278x_info *info, int *current_uA)
 	return 0;
 }
 
-static int ds2782_get_voltage(struct ds278x_info *info, int *voltage_uA)
+static int ds2782_get_voltage(struct ds278x_info *info, int *voltage_uV)
 {
 	s16 raw;
 	int err;
@@ -149,7 +149,7 @@ static int ds2782_get_voltage(struct ds278x_info *info, int *voltage_uA)
 	err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw);
 	if (err)
 		return err;
-	*voltage_uA = (raw / 32) * 4800;
+	*voltage_uV = (raw / 32) * 4800;
 	return 0;
 }
 
@@ -177,7 +177,7 @@ static int ds2786_get_current(struct ds278x_info *info, int *current_uA)
 	return 0;
 }
 
-static int ds2786_get_voltage(struct ds278x_info *info, int *voltage_uA)
+static int ds2786_get_voltage(struct ds278x_info *info, int *voltage_uV)
 {
 	s16 raw;
 	int err;
@@ -189,7 +189,7 @@ static int ds2786_get_voltage(struct ds278x_info *info, int *voltage_uA)
 	err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw);
 	if (err)
 		return err;
-	*voltage_uA = (raw / 8) * 1220;
+	*voltage_uV = (raw / 8) * 1220;
 	return 0;
 }
 

drivers/power/isp1704_charger.c

+/*
+ * ISP1704 USB Charger Detection driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/delay.h>
+
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+/* Vendor specific Power Control register */
+#define ISP1704_PWR_CTRL		0x3d
+#define ISP1704_PWR_CTRL_SWCTRL		(1 << 0)
+#define ISP1704_PWR_CTRL_DET_COMP	(1 << 1)
+#define ISP1704_PWR_CTRL_BVALID_RISE	(1 << 2)
+#define ISP1704_PWR_CTRL_BVALID_FALL	(1 << 3)
+#define ISP1704_PWR_CTRL_DP_WKPU_EN	(1 << 4)
+#define ISP1704_PWR_CTRL_VDAT_DET	(1 << 5)
+#define ISP1704_PWR_CTRL_DPVSRC_EN	(1 << 6)
+#define ISP1704_PWR_CTRL_HWDETECT	(1 << 7)
+
+#define NXP_VENDOR_ID			0x04cc
+
+static u16 isp170x_id[] = {
+	0x1704,
+	0x1707,
+};
+
+struct isp1704_charger {
+	struct device		*dev;
+	struct power_supply	psy;
+	struct otg_transceiver	*otg;
+	struct notifier_block	nb;
+	struct work_struct	work;
+
+	char			model[7];
+	unsigned		present:1;
+};
+
+/*
+ * ISP1704 detects PS/2 adapters as charger. To make sure the detected charger
+ * is actually a dedicated charger, the following steps need to be taken.
+ */
+static inline int isp1704_charger_verify(struct isp1704_charger *isp)
+{
+	int	ret = 0;
+	u8	r;
+
+	/* Reset the transceiver */
+	r = otg_io_read(isp->otg, ULPI_FUNC_CTRL);
+	r |= ULPI_FUNC_CTRL_RESET;
+	otg_io_write(isp->otg, ULPI_FUNC_CTRL, r);
+	usleep_range(1000, 2000);
+
+	/* Set normal mode */
+	r &= ~(ULPI_FUNC_CTRL_RESET | ULPI_FUNC_CTRL_OPMODE_MASK);
+	otg_io_write(isp->otg, ULPI_FUNC_CTRL, r);
+
+	/* Clear the DP and DM pull-down bits */
+	r = ULPI_OTG_CTRL_DP_PULLDOWN | ULPI_OTG_CTRL_DM_PULLDOWN;
+	otg_io_write(isp->otg, ULPI_CLR(ULPI_OTG_CTRL), r);
+
+	/* Enable strong pull-up on DP (1.5K) and reset */
+	r = ULPI_FUNC_CTRL_TERMSELECT | ULPI_FUNC_CTRL_RESET;
+	otg_io_write(isp->otg, ULPI_SET(ULPI_FUNC_CTRL), r);
+	usleep_range(1000, 2000);
+
+	/* Read the line state */
+	if (!otg_io_read(isp->otg, ULPI_DEBUG)) {
+		/* Disable strong pull-up on DP (1.5K) */
+		otg_io_write(isp->otg, ULPI_CLR(ULPI_FUNC_CTRL),
+				ULPI_FUNC_CTRL_TERMSELECT);
+		return 1;
+	}
+
+	/* Is it a charger or PS/2 connection */
+
+	/* Enable weak pull-up resistor on DP */
+	otg_io_write(isp->otg, ULPI_SET(ISP1704_PWR_CTRL),
+			ISP1704_PWR_CTRL_DP_WKPU_EN);
+
+	/* Disable strong pull-up on DP (1.5K) */
+	otg_io_write(isp->otg, ULPI_CLR(ULPI_FUNC_CTRL),
+			ULPI_FUNC_CTRL_TERMSELECT);
+
+	/* Enable weak pull-down resistor on DM */
+	otg_io_write(isp->otg, ULPI_SET(ULPI_OTG_CTRL),
+			ULPI_OTG_CTRL_DM_PULLDOWN);
+
+	/* It's a charger if the line states are clear */
+	if (!(otg_io_read(isp->otg, ULPI_DEBUG)))
+		ret = 1;
+
+	/* Disable weak pull-up resistor on DP */
+	otg_io_write(isp->otg, ULPI_CLR(ISP1704_PWR_CTRL),
+			ISP1704_PWR_CTRL_DP_WKPU_EN);
+
+	return ret;
+}
+
+static inline int isp1704_charger_detect(struct isp1704_charger *isp)
+{
+	unsigned long	timeout;
+	u8		r;
+	int		ret = 0;
+
+	/* set SW control bit in PWR_CTRL register */
+	otg_io_write(isp->otg, ISP1704_PWR_CTRL,
+			ISP1704_PWR_CTRL_SWCTRL);
+
+	/* enable manual charger detection */
+	r = (ISP1704_PWR_CTRL_SWCTRL | ISP1704_PWR_CTRL_DPVSRC_EN);
+	otg_io_write(isp->otg, ULPI_SET(ISP1704_PWR_CTRL), r);
+	usleep_range(1000, 2000);
+
+	timeout = jiffies + msecs_to_jiffies(300);
+	do {
+		/* Check if there is a charger */
+		if (otg_io_read(isp->otg, ISP1704_PWR_CTRL)
+				& ISP1704_PWR_CTRL_VDAT_DET) {
+			ret = isp1704_charger_verify(isp);
+			break;
+		}
+	} while (!time_after(jiffies, timeout));
+
+	return ret;
+}
+
+static void isp1704_charger_work(struct work_struct *data)
+{
+	int			detect;
+	struct isp1704_charger	*isp =
+		container_of(data, struct isp1704_charger, work);
+
+	/*
+	 * FIXME Only supporting dedicated chargers even though isp1704 can
+	 * detect HUB and HOST chargers. If the device has already been
+	 * enumerated, the detection will break the connection.
+	 */
+	if (isp->otg->state != OTG_STATE_B_IDLE)
+		return;
+
+	/* disable data pullups */
+	if (isp->otg->gadget)
+		usb_gadget_disconnect(isp->otg->gadget);
+
+	/* detect charger */
+	detect = isp1704_charger_detect(isp);
+	if (detect) {
+		isp->present = detect;
+		power_supply_changed(&isp->psy);
+	}
+
+	/* enable data pullups */
+	if (isp->otg->gadget)
+		usb_gadget_connect(isp->otg->gadget);
+}
+
+static int isp1704_notifier_call(struct notifier_block *nb,
+		unsigned long event, void *unused)
+{
+	struct isp1704_charger *isp =
+		container_of(nb, struct isp1704_charger, nb);
+
+	switch (event) {
+	case USB_EVENT_VBUS:
+		schedule_work(&isp->work);
+		break;
+	case USB_EVENT_NONE:
+		if (isp->present) {
+			isp->present = 0;
+			power_supply_changed(&isp->psy);
+		}
+		break;
+	default:
+		return NOTIFY_DONE;
+	}
+
+	return NOTIFY_OK;
+}
+
+static int isp1704_charger_get_property(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct isp1704_charger *isp =
+		container_of(psy, struct isp1704_charger, psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = isp->present;
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = isp->model;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = "NXP";
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static enum power_supply_property power_props[] = {
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static inline int isp1704_test_ulpi(struct isp1704_charger *isp)
+{
+	int vendor;
+	int product;
+	int i;
+	int ret = -ENODEV;
+
+	/* Test ULPI interface */
+	ret = otg_io_write(isp->otg, ULPI_SCRATCH, 0xaa);
+	if (ret < 0)
+		return ret;
+
+	ret = otg_io_read(isp->otg, ULPI_SCRATCH);
+	if (ret < 0)
+		return ret;
+
+	if (ret != 0xaa)
+		return -ENODEV;
+
+	/* Verify the product and vendor id matches */
+	vendor = otg_io_read(isp->otg, ULPI_VENDOR_ID_LOW);
+	vendor |= otg_io_read(isp->otg, ULPI_VENDOR_ID_HIGH) << 8;
+	if (vendor != NXP_VENDOR_ID)
+		return -ENODEV;
+
+	product = otg_io_read(isp->otg, ULPI_PRODUCT_ID_LOW);
+	product |= otg_io_read(isp->otg, ULPI_PRODUCT_ID_HIGH) << 8;
+
+	for (i = 0; i < ARRAY_SIZE(isp170x_id); i++) {
+		if (product == isp170x_id[i]) {
+			sprintf(isp->model, "isp%x", product);
+			return product;
+		}
+	}
+
+	dev_err(isp->dev, "product id %x not matching known ids", product);
+
+	return -ENODEV;
+}
+
+static int __devinit isp1704_charger_probe(struct platform_device *pdev)
+{
+	struct isp1704_charger	*isp;
+	int			ret = -ENODEV;
+
+	isp = kzalloc(sizeof *isp, GFP_KERNEL);
+	if (!isp)
+		return -ENOMEM;
+
+	isp->otg = otg_get_transceiver();
+	if (!isp->otg)
+		goto fail0;
+
+	ret = isp1704_test_ulpi(isp);
+	if (ret < 0)
+		goto fail1;
+
+	isp->dev = &pdev->dev;
+	platform_set_drvdata(pdev, isp);
+
+	isp->psy.name		= "isp1704";
+	isp->psy.type		= POWER_SUPPLY_TYPE_USB;
+	isp->psy.properties	= power_props;
+	isp->psy.num_properties	= ARRAY_SIZE(power_props);
+	isp->psy.get_property	= isp1704_charger_get_property;
+
+	ret = power_supply_register(isp->dev, &isp->psy);
+	if (ret)
+		goto fail1;
+
+	/*
+	 * REVISIT: using work in order to allow the otg notifications to be
+	 * made atomically in the future.
+	 */
+	INIT_WORK(&isp->work, isp1704_charger_work);
+
+	isp->nb.notifier_call = isp1704_notifier_call;
+
+	ret = otg_register_notifier(isp->otg, &isp->nb);
+	if (ret)
+		goto fail2;
+
+	dev_info(isp->dev, "registered with product id %s\n", isp->model);
+
+	return 0;
+fail2:
+	power_supply_unregister(&isp->psy);
+fail1:
+	otg_put_transceiver(isp->otg);
+fail0:
+	kfree(isp);
+
+	dev_err(&pdev->dev, "failed to register isp1704 with error %d\n", ret);
+
+	return ret;
+}
+
+static int __devexit isp1704_charger_remove(struct platform_device *pdev)
+{
+	struct isp1704_charger *isp = platform_get_drvdata(pdev);
+
+	otg_unregister_notifier(isp->otg, &isp->nb);
+	power_supply_unregister(&isp->psy);
+	otg_put_transceiver(isp->otg);
+	kfree(isp);
+
+	return 0;
+}
+
+static struct platform_driver isp1704_charger_driver = {
+	.driver = {
+		.name = "isp1704_charger",
+	},
+	.probe = isp1704_charger_probe,
+	.remove = __devexit_p(isp1704_charger_remove),
+};
+
+static int __init isp1704_charger_init(void)
+{
+	return platform_driver_register(&isp1704_charger_driver);
+}
+module_init(isp1704_charger_init);
+
+static void __exit isp1704_charger_exit(void)
+{
+	platform_driver_unregister(&isp1704_charger_driver);
+}
+module_exit(isp1704_charger_exit);
+
+MODULE_ALIAS("platform:isp1704_charger");
+MODULE_AUTHOR("Nokia Corporation");
+MODULE_DESCRIPTION("ISP170x USB Charger driver");
+MODULE_LICENSE("GPL");

drivers/power/jz4740-battery.c

@@ -383,6 +383,7 @@ static int __devexit jz_battery_remove(struct platform_device *pdev)
 
 	iounmap(jz_battery->base);
 	release_mem_region(jz_battery->mem->start, resource_size(jz_battery->mem));
+	kfree(jz_battery);
 
 	return 0;
 }

drivers/power/olpc_battery.c

@@ -271,14 +271,14 @@ static int olpc_bat_get_property(struct power_supply *psy,
 		if (ret)
 			return ret;
 
-		val->intval = (int)be16_to_cpu(ec_word) * 9760L / 32;
+		val->intval = (s16)be16_to_cpu(ec_word) * 9760L / 32;
 		break;
 	case POWER_SUPPLY_PROP_CURRENT_AVG:
 		ret = olpc_ec_cmd(EC_BAT_CURRENT, NULL, 0, (void *)&ec_word, 2);
 		if (ret)
 			return ret;
 
-		val->intval = (int)be16_to_cpu(ec_word) * 15625L / 120;
+		val->intval = (s16)be16_to_cpu(ec_word) * 15625L / 120;
 		break;
 	case POWER_SUPPLY_PROP_CAPACITY:
 		ret = olpc_ec_cmd(EC_BAT_SOC, NULL, 0, &ec_byte, 1);
@@ -299,7 +299,7 @@ static int olpc_bat_get_property(struct power_supply *psy,
 		if (ret)
 			return ret;
 
-		val->intval = (int)be16_to_cpu(ec_word) * 100 / 256;
+		val->intval = (s16)be16_to_cpu(ec_word) * 100 / 256;
 		break;
 	case POWER_SUPPLY_PROP_TEMP_AMBIENT:
 		ret = olpc_ec_cmd(EC_AMB_TEMP, NULL, 0, (void *)&ec_word, 2);
@@ -313,7 +313,7 @@ static int olpc_bat_get_property(struct power_supply *psy,
 		if (ret)
 			return ret;
 
-		val->intval = (int)be16_to_cpu(ec_word) * 6250 / 15;
+		val->intval = (s16)be16_to_cpu(ec_word) * 6250 / 15;
 		break;
 	case POWER_SUPPLY_PROP_SERIAL_NUMBER:
 		ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8);

drivers/power/pcf50633-charger.c

@@ -456,6 +456,7 @@ static int __devexit pcf50633_mbc_remove(struct platform_device *pdev)
 	for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++)
 		pcf50633_free_irq(mbc->pcf, mbc_irq_handlers[i]);
 
+	sysfs_remove_group(&pdev->dev.kobj, &mbc_attr_group);
 	power_supply_unregister(&mbc->usb);
 	power_supply_unregister(&mbc->adapter);
 	power_supply_unregister(&mbc->ac);

drivers/power/power_supply_sysfs.c

@@ -42,7 +42,8 @@ static ssize_t power_supply_show_property(struct device *dev,
 					  struct device_attribute *attr,
 					  char *buf) {
 	static char *type_text[] = {
-		"Battery", "UPS", "Mains", "USB"
+		"Battery", "UPS", "Mains", "USB",
+		"USB_DCP", "USB_CDP", "USB_ACA"
 	};
 	static char *status_text[] = {
 		"Unknown", "Charging", "Discharging", "Not charging", "Full"
@@ -138,6 +139,7 @@ static struct device_attribute power_supply_attrs[] = {
 	POWER_SUPPLY_ATTR(voltage_min_design),
 	POWER_SUPPLY_ATTR(voltage_now),
 	POWER_SUPPLY_ATTR(voltage_avg),
+	POWER_SUPPLY_ATTR(current_max),
 	POWER_SUPPLY_ATTR(current_now),
 	POWER_SUPPLY_ATTR(current_avg),
 	POWER_SUPPLY_ATTR(power_now),

drivers/power/twl4030_charger.c

+/*
+ * TWL4030/TPS65950 BCI (Battery Charger Interface) driver
+ *
+ * Copyright (C) 2010 Gražvydas Ignotas <notasas@gmail.com>
+ *
+ * based on twl4030_bci_battery.c by TI
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/i2c/twl.h>
+#include <linux/power_supply.h>
+#include <linux/notifier.h>
+#include <linux/usb/otg.h>
+
+#define TWL4030_BCIMSTATEC	0x02
+#define TWL4030_BCIICHG		0x08
+#define TWL4030_BCIVAC		0x0a
+#define TWL4030_BCIVBUS		0x0c
+#define TWL4030_BCIMFSTS4	0x10
+#define TWL4030_BCICTL1		0x23
+
+#define TWL4030_BCIAUTOWEN	BIT(5)
+#define TWL4030_CONFIG_DONE	BIT(4)
+#define TWL4030_BCIAUTOUSB	BIT(1)
+#define TWL4030_BCIAUTOAC	BIT(0)
+#define TWL4030_CGAIN		BIT(5)
+#define TWL4030_USBFASTMCHG	BIT(2)
+#define TWL4030_STS_VBUS	BIT(7)
+#define TWL4030_STS_USB_ID	BIT(2)
+
+/* BCI interrupts */
+#define TWL4030_WOVF		BIT(0) /* Watchdog overflow */
+#define TWL4030_TMOVF		BIT(1) /* Timer overflow */
+#define TWL4030_ICHGHIGH	BIT(2) /* Battery charge current high */
+#define TWL4030_ICHGLOW		BIT(3) /* Battery cc. low / FSM state change */
+#define TWL4030_ICHGEOC		BIT(4) /* Battery current end-of-charge */
+#define TWL4030_TBATOR2		BIT(5) /* Battery temperature out of range 2 */
+#define TWL4030_TBATOR1		BIT(6) /* Battery temperature out of range 1 */
+#define TWL4030_BATSTS		BIT(7) /* Battery status */
+
+#define TWL4030_VBATLVL		BIT(0) /* VBAT level */
+#define TWL4030_VBATOV		BIT(1) /* VBAT overvoltage */
+#define TWL4030_VBUSOV		BIT(2) /* VBUS overvoltage */
+#define TWL4030_ACCHGOV		BIT(3) /* Ac charger overvoltage */
+
+#define TWL4030_MSTATEC_USB		BIT(4)
+#define TWL4030_MSTATEC_AC		BIT(5)
+#define TWL4030_MSTATEC_MASK		0x0f
+#define TWL4030_MSTATEC_QUICK1		0x02
+#define TWL4030_MSTATEC_QUICK7		0x07
+#define TWL4030_MSTATEC_COMPLETE1	0x0b
+#define TWL4030_MSTATEC_COMPLETE4	0x0e
+
+static bool allow_usb;
+module_param(allow_usb, bool, 1);
+MODULE_PARM_DESC(allow_usb, "Allow USB charge drawing default current");
+
+struct twl4030_bci {
+	struct device		*dev;
+	struct power_supply	ac;
+	struct power_supply	usb;
+	struct otg_transceiver	*transceiver;
+	struct notifier_block	otg_nb;
+	int			irq_chg;
+	int			irq_bci;
+};
+
+/*
+ * clear and set bits on an given register on a given module
+ */
+static int twl4030_clear_set(u8 mod_no, u8 clear, u8 set, u8 reg)
+{
+	u8 val = 0;
+	int ret;
+
+	ret = twl_i2c_read_u8(mod_no, &val, reg);
+	if (ret)
+		return ret;
+
+	val &= ~clear;
+	val |= set;
+
+	return twl_i2c_write_u8(mod_no, val, reg);
+}
+
+static int twl4030_bci_read(u8 reg, u8 *val)
+{
+	return twl_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE, val, reg);
+}
+
+static int twl4030_clear_set_boot_bci(u8 clear, u8 set)
+{
+	return twl4030_clear_set(TWL4030_MODULE_PM_MASTER, 0,
+			TWL4030_CONFIG_DONE | TWL4030_BCIAUTOWEN | set,
+			TWL4030_PM_MASTER_BOOT_BCI);
+}
+
+static int twl4030bci_read_adc_val(u8 reg)
+{
+	int ret, temp;
+	u8 val;
+
+	/* read MSB */
+	ret = twl4030_bci_read(reg + 1, &val);
+	if (ret)
+		return ret;
+
+	temp = (int)(val & 0x03) << 8;
+
+	/* read LSB */
+	ret = twl4030_bci_read(reg, &val);
+	if (ret)
+		return ret;
+
+	return temp | val;
+}
+
+/*
+ * Check if VBUS power is present
+ */
+static int twl4030_bci_have_vbus(struct twl4030_bci *bci)
+{
+	int ret;
+	u8 hwsts;
+
+	ret = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &hwsts,
+			      TWL4030_PM_MASTER_STS_HW_CONDITIONS);
+	if (ret < 0)
+		return 0;
+
+	dev_dbg(bci->dev, "check_vbus: HW_CONDITIONS %02x\n", hwsts);
+
+	/* in case we also have STS_USB_ID, VBUS is driven by TWL itself */
+	if ((hwsts & TWL4030_STS_VBUS) && !(hwsts & TWL4030_STS_USB_ID))
+		return 1;
+
+	return 0;
+}
+
+/*
+ * Enable/Disable USB Charge funtionality.
+ */
+static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
+{
+	int ret;
+
+	if (enable) {
+		/* Check for USB charger conneted */
+		if (!twl4030_bci_have_vbus(bci))
+			return -ENODEV;
+
+		/*
+		 * Until we can find out what current the device can provide,
+		 * require a module param to enable USB charging.
+		 */
+		if (!allow_usb) {
+			dev_warn(bci->dev, "USB charging is disabled.\n");
+			return -EACCES;
+		}
+
+		/* forcing the field BCIAUTOUSB (BOOT_BCI[1]) to 1 */
+		ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOUSB);
+		if (ret < 0)
+			return ret;
+
+		/* forcing USBFASTMCHG(BCIMFSTS4[2]) to 1 */
+		ret = twl4030_clear_set(TWL4030_MODULE_MAIN_CHARGE, 0,
+			TWL4030_USBFASTMCHG, TWL4030_BCIMFSTS4);
+	} else {
+		ret = twl4030_clear_set_boot_bci(TWL4030_BCIAUTOUSB, 0);
+	}
+
+	return ret;
+}
+
+/*
+ * Enable/Disable AC Charge funtionality.
+ */
+static int twl4030_charger_enable_ac(bool enable)
+{
+	int ret;
+
+	if (enable)
+		ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOAC);
+	else
+		ret = twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC, 0);
+
+	return ret;
+}
+
+/*
+ * TWL4030 CHG_PRES (AC charger presence) events
+ */
+static irqreturn_t twl4030_charger_interrupt(int irq, void *arg)
+{
+	struct twl4030_bci *bci = arg;
+
+	dev_dbg(bci->dev, "CHG_PRES irq\n");
+	power_supply_changed(&bci->ac);
+	power_supply_changed(&bci->usb);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * TWL4030 BCI monitoring events
+ */
+static irqreturn_t twl4030_bci_interrupt(int irq, void *arg)
+{
+	struct twl4030_bci *bci = arg;
+	u8 irqs1, irqs2;
+	int ret;
+
+	ret = twl_i2c_read_u8(TWL4030_MODULE_INTERRUPTS, &irqs1,
+			      TWL4030_INTERRUPTS_BCIISR1A);
+	if (ret < 0)
+		return IRQ_HANDLED;
+
+	ret = twl_i2c_read_u8(TWL4030_MODULE_INTERRUPTS, &irqs2,
+			      TWL4030_INTERRUPTS_BCIISR2A);
+	if (ret < 0)
+		return IRQ_HANDLED;
+
+	dev_dbg(bci->dev, "BCI irq %02x %02x\n", irqs2, irqs1);
+
+	if (irqs1 & (TWL4030_ICHGLOW | TWL4030_ICHGEOC)) {
+		/* charger state change, inform the core */
+		power_supply_changed(&bci->ac);
+		power_supply_changed(&bci->usb);
+	}
+
+	/* various monitoring events, for now we just log them here */
+	if (irqs1 & (TWL4030_TBATOR2 | TWL4030_TBATOR1))
+		dev_warn(bci->dev, "battery temperature out of range\n");
+
+	if (irqs1 & TWL4030_BATSTS)
+		dev_crit(bci->dev, "battery disconnected\n");
+
+	if (irqs2 & TWL4030_VBATOV)
+		dev_crit(bci->dev, "VBAT overvoltage\n");
+
+	if (irqs2 & TWL4030_VBUSOV)
+		dev_crit(bci->dev, "VBUS overvoltage\n");
+
+	if (irqs2 & TWL4030_ACCHGOV)
+		dev_crit(bci->dev, "Ac charger overvoltage\n");
+
+	return IRQ_HANDLED;
+}
+
+static int twl4030_bci_usb_ncb(struct notifier_block *nb, unsigned long val,
+			       void *priv)
+{
+	struct twl4030_bci *bci = container_of(nb, struct twl4030_bci, otg_nb);
+
+	dev_dbg(bci->dev, "OTG notify %lu\n", val);
+
+	switch (val) {
+	case USB_EVENT_VBUS:
+	case USB_EVENT_CHARGER:
+		twl4030_charger_enable_usb(bci, true);
+		break;
+	case USB_EVENT_NONE:
+		twl4030_charger_enable_usb(bci, false);
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+/*
+ * TI provided formulas:
+ * CGAIN == 0: ICHG = (BCIICHG * 1.7) / (2^10 - 1) - 0.85
+ * CGAIN == 1: ICHG = (BCIICHG * 3.4) / (2^10 - 1) - 1.7
+ * Here we use integer approximation of:
+ * CGAIN == 0: val * 1.6618 - 0.85
+ * CGAIN == 1: (val * 1.6618 - 0.85) * 2
+ */
+static int twl4030_charger_get_current(void)
+{
+	int curr;
+	int ret;
+	u8 bcictl1;
+
+	curr = twl4030bci_read_adc_val(TWL4030_BCIICHG);
+	if (curr < 0)
+		return curr;
+
+	ret = twl4030_bci_read(TWL4030_BCICTL1, &bcictl1);
+	if (ret)
+		return ret;
+
+	ret = (curr * 16618 - 850 * 10000) / 10;
+	if (bcictl1 & TWL4030_CGAIN)
+		ret *= 2;
+
+	return ret;
+}
+
+/*
+ * Returns the main charge FSM state
+ * Or < 0 on failure.
+ */
+static int twl4030bci_state(struct twl4030_bci *bci)
+{
+	int ret;
+	u8 state;
+
+	ret = twl4030_bci_read(TWL4030_BCIMSTATEC, &state);
+	if (ret) {
+		pr_err("twl4030_bci: error reading BCIMSTATEC\n");
+		return ret;
+	}
+
+	dev_dbg(bci->dev, "state: %02x\n", state);
+
+	return state;
+}
+
+static int twl4030_bci_state_to_status(int state)
+{
+	state &= TWL4030_MSTATEC_MASK;
+	if (TWL4030_MSTATEC_QUICK1 <= state && state <= TWL4030_MSTATEC_QUICK7)
+		return POWER_SUPPLY_STATUS_CHARGING;
+	else if (TWL4030_MSTATEC_COMPLETE1 <= state &&
+					state <= TWL4030_MSTATEC_COMPLETE4)
+		return POWER_SUPPLY_STATUS_FULL;
+	else
+		return POWER_SUPPLY_STATUS_NOT_CHARGING;
+}
+
+static int twl4030_bci_get_property(struct power_supply *psy,
+				    enum power_supply_property psp,
+				    union power_supply_propval *val)
+{
+	struct twl4030_bci *bci = dev_get_drvdata(psy->dev->parent);
+	int is_charging;
+	int state;
+	int ret;
+
+	state = twl4030bci_state(bci);
+	if (state < 0)
+		return state;
+
+	if (psy->type == POWER_SUPPLY_TYPE_USB)
+		is_charging = state & TWL4030_MSTATEC_USB;
+	else
+		is_charging = state & TWL4030_MSTATEC_AC;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		if (is_charging)
+			val->intval = twl4030_bci_state_to_status(state);
+		else
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		/* charging must be active for meaningful result */
+		if (!is_charging)
+			return -ENODATA;
+		if (psy->type == POWER_SUPPLY_TYPE_USB) {
+			ret = twl4030bci_read_adc_val(TWL4030_BCIVBUS);
+			if (ret < 0)
+				return ret;
+			/* BCIVBUS uses ADCIN8, 7/1023 V/step */
+			val->intval = ret * 6843;
+		} else {
+			ret = twl4030bci_read_adc_val(TWL4030_BCIVAC);
+			if (ret < 0)
+				return ret;
+			/* BCIVAC uses ADCIN11, 10/1023 V/step */
+			val->intval = ret * 9775;
+		}
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		if (!is_charging)
+			return -ENODATA;
+		/* current measurement is shared between AC and USB */
+		ret = twl4030_charger_get_current();
+		if (ret < 0)
+			return ret;
+		val->intval = ret;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = is_charging &&
+			twl4030_bci_state_to_status(state) !=
+				POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static enum power_supply_property twl4030_charger_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static int __init twl4030_bci_probe(struct platform_device *pdev)
+{
+	struct twl4030_bci *bci;
+	int ret;
+	int reg;
+
+	bci = kzalloc(sizeof(*bci), GFP_KERNEL);
+	if (bci == NULL)
+		return -ENOMEM;
+
+	bci->dev = &pdev->dev;
+	bci->irq_chg = platform_get_irq(pdev, 0);
+	bci->irq_bci = platform_get_irq(pdev, 1);
+
+	platform_set_drvdata(pdev, bci);
+
+	bci->ac.name = "twl4030_ac";
+	bci->ac.type = POWER_SUPPLY_TYPE_MAINS;
+	bci->ac.properties = twl4030_charger_props;
+	bci->ac.num_properties = ARRAY_SIZE(twl4030_charger_props);
+	bci->ac.get_property = twl4030_bci_get_property;
+
+	ret = power_supply_register(&pdev->dev, &bci->ac);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register ac: %d\n", ret);
+		goto fail_register_ac;
+	}
+
+	bci->usb.name = "twl4030_usb";
+	bci->usb.type = POWER_SUPPLY_TYPE_USB;
+	bci->usb.properties = twl4030_charger_props;
+	bci->usb.num_properties = ARRAY_SIZE(twl4030_charger_props);
+	bci->usb.get_property = twl4030_bci_get_property;
+
+	ret = power_supply_register(&pdev->dev, &bci->usb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register usb: %d\n", ret);
+		goto fail_register_usb;
+	}
+
+	ret = request_threaded_irq(bci->irq_chg, NULL,
+			twl4030_charger_interrupt, 0, pdev->name, bci);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "could not request irq %d, status %d\n",
+			bci->irq_chg, ret);
+		goto fail_chg_irq;
+	}
+
+	ret = request_threaded_irq(bci->irq_bci, NULL,
+			twl4030_bci_interrupt, 0, pdev->name, bci);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "could not request irq %d, status %d\n",
+			bci->irq_bci, ret);
+		goto fail_bci_irq;
+	}
+
+	bci->transceiver = otg_get_transceiver();
+	if (bci->transceiver != NULL) {
+		bci->otg_nb.notifier_call = twl4030_bci_usb_ncb;
+		otg_register_notifier(bci->transceiver, &bci->otg_nb);
+	}
+
+	/* Enable interrupts now. */
+	reg = ~(TWL4030_ICHGLOW | TWL4030_ICHGEOC | TWL4030_TBATOR2 |
+		TWL4030_TBATOR1 | TWL4030_BATSTS);
+	ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg,
+			       TWL4030_INTERRUPTS_BCIIMR1A);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to unmask interrupts: %d\n", ret);
+		goto fail_unmask_interrupts;
+	}
+
+	reg = ~(TWL4030_VBATOV | TWL4030_VBUSOV | TWL4030_ACCHGOV);
+	ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg,
+			       TWL4030_INTERRUPTS_BCIIMR2A);
+	if (ret < 0)
+		dev_warn(&pdev->dev, "failed to unmask interrupts: %d\n", ret);
+
+	twl4030_charger_enable_ac(true);
+	twl4030_charger_enable_usb(bci, true);
+
+	return 0;
+
+fail_unmask_interrupts:
+	if (bci->transceiver != NULL) {
+		otg_unregister_notifier(bci->transceiver, &bci->otg_nb);
+		otg_put_transceiver(bci->transceiver);
+	}
+	free_irq(bci->irq_bci, bci);
+fail_bci_irq:
+	free_irq(bci->irq_chg, bci);
+fail_chg_irq:
+	power_supply_unregister(&bci->usb);
+fail_register_usb:
+	power_supply_unregister(&bci->ac);
+fail_register_ac:
+	platform_set_drvdata(pdev, NULL);
+	kfree(bci);
+
+	return ret;
+}
+
+static int __exit twl4030_bci_remove(struct platform_device *pdev)
+{
+	struct twl4030_bci *bci = platform_get_drvdata(pdev);
+
+	twl4030_charger_enable_ac(false);
+	twl4030_charger_enable_usb(bci, false);
+
+	/* mask interrupts */
+	twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff,
+			 TWL4030_INTERRUPTS_BCIIMR1A);
+	twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff,
+			 TWL4030_INTERRUPTS_BCIIMR2A);
+
+	if (bci->transceiver != NULL) {
+		otg_unregister_notifier(bci->transceiver, &bci->otg_nb);
+		otg_put_transceiver(bci->transceiver);
+	}
+	free_irq(bci->irq_bci, bci);
+	free_irq(bci->irq_chg, bci);
+	power_supply_unregister(&bci->usb);
+	power_supply_unregister(&bci->ac);
+	platform_set_drvdata(pdev, NULL);
+	kfree(bci);
+
+	return 0;
+}
+
+static struct platform_driver twl4030_bci_driver = {
+	.driver	= {
+		.name	= "twl4030_bci",
+		.owner	= THIS_MODULE,
+	},
+	.remove	= __exit_p(twl4030_bci_remove),
+};
+
+static int __init twl4030_bci_init(void)
+{
+	return platform_driver_probe(&twl4030_bci_driver, twl4030_bci_probe);
+}
+module_init(twl4030_bci_init);
+
+static void __exit twl4030_bci_exit(void)
+{
+	platform_driver_unregister(&twl4030_bci_driver);
+}
+module_exit(twl4030_bci_exit);
+
+MODULE_AUTHOR("Gražydas Ignotas");
+MODULE_DESCRIPTION("TWL4030 Battery Charger Interface driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:twl4030_bci");

drivers/power/wm831x_power.c

@@ -267,7 +267,6 @@ static void wm831x_config_battery(struct wm831x *wm831x)
 	ret = wm831x_set_bits(wm831x, WM831X_CHARGER_CONTROL_1,
 			      WM831X_CHG_ENA_MASK |
 			      WM831X_CHG_FAST_MASK |
-			      WM831X_CHG_ITERM_MASK |
 			      WM831X_CHG_ITERM_MASK,
 			      reg1);
 	if (ret != 0)
@@ -612,6 +611,7 @@ static __devexit int wm831x_power_remove(struct platform_device *pdev)
 	power_supply_unregister(&wm831x_power->battery);
 	power_supply_unregister(&wm831x_power->wall);
 	power_supply_unregister(&wm831x_power->usb);
+	kfree(wm831x_power);
 	return 0;
 }
 

include/linux/power_supply.h

@@ -89,6 +89,7 @@ enum power_supply_property {
 	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_CURRENT_MAX,
 	POWER_SUPPLY_PROP_CURRENT_NOW,
 	POWER_SUPPLY_PROP_CURRENT_AVG,
 	POWER_SUPPLY_PROP_POWER_NOW,
@@ -125,7 +126,10 @@ enum power_supply_type {
 	POWER_SUPPLY_TYPE_BATTERY = 0,
 	POWER_SUPPLY_TYPE_UPS,
 	POWER_SUPPLY_TYPE_MAINS,
-	POWER_SUPPLY_TYPE_USB,
+	POWER_SUPPLY_TYPE_USB,		/* Standard Downstream Port */
+	POWER_SUPPLY_TYPE_USB_DCP,	/* Dedicated Charging Port */
+	POWER_SUPPLY_TYPE_USB_CDP,	/* Charging Downstream Port */
+	POWER_SUPPLY_TYPE_USB_ACA,	/* Accessory Charger Adapters */
 };
 
 union power_supply_propval {