提交 4500cf60 编写于 作者: L Linus Torvalds

Merge branch 'x86-intel-mid-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull Intel MID updates from Ingo Molnar:
 "This tree improves Intel MID (Mobile Internet Device) platform
  support:

   - Merrifield platform support (David Cohen)
   - Clovertrail platform support (Kuppuswamy Sathyanarayanan)
   - Various cleanups and fixes (David Cohen)"

* 'x86-intel-mid-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, intel_mid: Replace memcpy with struct assignment
  x86, intel-mid: Return proper error code from get_gpio_by_name()
  x86, intel-mid: Check get_gpio_by_name() error code on platform code
  x86, intel-mid: sfi_handle_*_dev() should check for pdata error code
  x86, intel-mid: Remove deprecated X86_MDFLD and X86_WANT_INTEL_MID configs
  x86, intel-mid: Add Merrifield platform support
  x86, intel-mid: Add Clovertrail platform support
  x86, intel-mid: Move Medfield code out of intel-mid.c core file
......@@ -439,42 +439,26 @@ config X86_INTEL_CE
This option compiles in support for the CE4100 SOC for settop
boxes and media devices.
config X86_WANT_INTEL_MID
config X86_INTEL_MID
bool "Intel MID platform support"
depends on X86_32
depends on X86_EXTENDED_PLATFORM
---help---
Select to build a kernel capable of supporting Intel MID platform
systems which do not have the PCI legacy interfaces (Moorestown,
Medfield). If you are building for a PC class system say N here.
if X86_WANT_INTEL_MID
config X86_INTEL_MID
bool
config X86_MDFLD
bool "Medfield MID platform"
depends on PCI
depends on PCI_GOANY
depends on X86_IO_APIC
select X86_INTEL_MID
select SFI
select I2C
select DW_APB_TIMER
select APB_TIMER
select I2C
select SPI
select INTEL_SCU_IPC
select X86_PLATFORM_DEVICES
select MFD_INTEL_MSIC
---help---
Medfield is Intel's Low Power Intel Architecture (LPIA) based Moblin
Internet Device(MID) platform.
Unlike standard x86 PCs, Medfield does not have many legacy devices
nor standard legacy replacement devices/features. e.g. Medfield does
not contain i8259, i8254, HPET, legacy BIOS, most of the io ports.
Select to build a kernel capable of supporting Intel MID (Mobile
Internet Device) platform systems which do not have the PCI legacy
interfaces. If you are building for a PC class system say N here.
endif
Intel MID platforms are based on an Intel processor and chipset which
consume less power than most of the x86 derivatives.
config X86_INTEL_LPSS
bool "Intel Low Power Subsystem Support"
......
......@@ -51,10 +51,41 @@ struct devs_id {
enum intel_mid_cpu_type {
/* 1 was Moorestown */
INTEL_MID_CPU_CHIP_PENWELL = 2,
INTEL_MID_CPU_CHIP_CLOVERVIEW,
INTEL_MID_CPU_CHIP_TANGIER,
};
extern enum intel_mid_cpu_type __intel_mid_cpu_chip;
/**
* struct intel_mid_ops - Interface between intel-mid & sub archs
* @arch_setup: arch_setup function to re-initialize platform
* structures (x86_init, x86_platform_init)
*
* This structure can be extended if any new interface is required
* between intel-mid & its sub arch files.
*/
struct intel_mid_ops {
void (*arch_setup)(void);
};
/* Helper API's for INTEL_MID_OPS_INIT */
#define DECLARE_INTEL_MID_OPS_INIT(cpuname, cpuid) \
[cpuid] = get_##cpuname##_ops
/* Maximum number of CPU ops */
#define MAX_CPU_OPS(a) (sizeof(a)/sizeof(void *))
/*
* For every new cpu addition, a weak get_<cpuname>_ops() function needs be
* declared in arch/x86/platform/intel_mid/intel_mid_weak_decls.h.
*/
#define INTEL_MID_OPS_INIT {\
DECLARE_INTEL_MID_OPS_INIT(penwell, INTEL_MID_CPU_CHIP_PENWELL), \
DECLARE_INTEL_MID_OPS_INIT(cloverview, INTEL_MID_CPU_CHIP_CLOVERVIEW), \
DECLARE_INTEL_MID_OPS_INIT(tangier, INTEL_MID_CPU_CHIP_TANGIER) \
};
#ifdef CONFIG_X86_INTEL_MID
static inline enum intel_mid_cpu_type intel_mid_identify_cpu(void)
......@@ -86,8 +117,21 @@ extern enum intel_mid_timer_options intel_mid_timer_options;
* Penwell uses spread spectrum clock, so the freq number is not exactly
* the same as reported by MSR based on SDM.
*/
#define PENWELL_FSB_FREQ_83SKU 83200
#define PENWELL_FSB_FREQ_100SKU 99840
#define FSB_FREQ_83SKU 83200
#define FSB_FREQ_100SKU 99840
#define FSB_FREQ_133SKU 133000
#define FSB_FREQ_167SKU 167000
#define FSB_FREQ_200SKU 200000
#define FSB_FREQ_267SKU 267000
#define FSB_FREQ_333SKU 333000
#define FSB_FREQ_400SKU 400000
/* Bus Select SoC Fuse value */
#define BSEL_SOC_FUSE_MASK 0x7
#define BSEL_SOC_FUSE_001 0x1 /* FSB 133MHz */
#define BSEL_SOC_FUSE_101 0x5 /* FSB 100MHz */
#define BSEL_SOC_FUSE_111 0x7 /* FSB 83MHz */
#define SFI_MTMR_MAX_NUM 8
#define SFI_MRTC_MAX 8
......
......@@ -31,6 +31,7 @@
#include <asm/pci_x86.h>
#include <asm/hw_irq.h>
#include <asm/io_apic.h>
#include <asm/intel-mid.h>
#define PCIE_CAP_OFFSET 0x100
......@@ -219,7 +220,10 @@ static int intel_mid_pci_irq_enable(struct pci_dev *dev)
irq_attr.ioapic = mp_find_ioapic(dev->irq);
irq_attr.ioapic_pin = dev->irq;
irq_attr.trigger = 1; /* level */
irq_attr.polarity = 1; /* active low */
if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_TANGIER)
irq_attr.polarity = 0; /* active high */
else
irq_attr.polarity = 1; /* active low */
io_apic_set_pci_routing(&dev->dev, dev->irq, &irq_attr);
return 0;
......
obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o
obj-$(CONFIG_X86_INTEL_MID) += intel_mid_vrtc.o
obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o intel_mid_vrtc.o mfld.o mrfl.o
obj-$(CONFIG_EARLY_PRINTK_INTEL_MID) += early_printk_intel_mid.o
# SFI specific code
ifdef CONFIG_X86_INTEL_MID
obj-$(CONFIG_SFI) += sfi.o device_libs/
......
......@@ -22,7 +22,9 @@ static void __init *emc1403_platform_data(void *info)
int intr = get_gpio_by_name("thermal_int");
int intr2nd = get_gpio_by_name("thermal_alert");
if (intr == -1 || intr2nd == -1)
if (intr < 0)
return NULL;
if (intr2nd < 0)
return NULL;
i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
......
......@@ -66,7 +66,7 @@ static int __init pb_keys_init(void)
gb[i].gpio = get_gpio_by_name(gb[i].desc);
pr_debug("info[%2d]: name = %s, gpio = %d\n", i, gb[i].desc,
gb[i].gpio);
if (gb[i].gpio == -1)
if (gb[i].gpio < 0)
continue;
if (i != good)
......
......@@ -21,7 +21,9 @@ static void __init *lis331dl_platform_data(void *info)
int intr = get_gpio_by_name("accel_int");
int intr2nd = get_gpio_by_name("accel_2");
if (intr == -1 || intr2nd == -1)
if (intr < 0)
return NULL;
if (intr2nd < 0)
return NULL;
i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
......
......@@ -48,7 +48,7 @@ static void __init *max7315_platform_data(void *info)
gpio_base = get_gpio_by_name(base_pin_name);
intr = get_gpio_by_name(intr_pin_name);
if (gpio_base == -1)
if (gpio_base < 0)
return NULL;
max7315->gpio_base = gpio_base;
if (intr != -1) {
......
......@@ -19,7 +19,7 @@ static void *mpu3050_platform_data(void *info)
struct i2c_board_info *i2c_info = info;
int intr = get_gpio_by_name("mpu3050_int");
if (intr == -1)
if (intr < 0)
return NULL;
i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
......
......@@ -26,7 +26,7 @@ static void __init *pmic_gpio_platform_data(void *info)
static struct intel_pmic_gpio_platform_data pmic_gpio_pdata;
int gpio_base = get_gpio_by_name("pmic_gpio_base");
if (gpio_base == -1)
if (gpio_base < 0)
gpio_base = 64;
pmic_gpio_pdata.gpio_base = gpio_base;
pmic_gpio_pdata.irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
......
......@@ -34,10 +34,10 @@ static void *tca6416_platform_data(void *info)
gpio_base = get_gpio_by_name(base_pin_name);
intr = get_gpio_by_name(intr_pin_name);
if (gpio_base == -1)
if (gpio_base < 0)
return NULL;
tca6416.gpio_base = gpio_base;
if (intr != -1) {
if (intr >= 0) {
i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
tca6416.irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
} else {
......
......@@ -35,6 +35,8 @@
#include <asm/apb_timer.h>
#include <asm/reboot.h>
#include "intel_mid_weak_decls.h"
/*
* the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock,
* cmdline option x86_intel_mid_timer can be used to override the configuration
......@@ -58,12 +60,16 @@
enum intel_mid_timer_options intel_mid_timer_options;
/* intel_mid_ops to store sub arch ops */
struct intel_mid_ops *intel_mid_ops;
/* getter function for sub arch ops*/
static void *(*get_intel_mid_ops[])(void) = INTEL_MID_OPS_INIT;
enum intel_mid_cpu_type __intel_mid_cpu_chip;
EXPORT_SYMBOL_GPL(__intel_mid_cpu_chip);
static void intel_mid_power_off(void)
{
}
};
static void intel_mid_reboot(void)
{
......@@ -72,32 +78,6 @@ static void intel_mid_reboot(void)
static unsigned long __init intel_mid_calibrate_tsc(void)
{
unsigned long fast_calibrate;
u32 lo, hi, ratio, fsb;
rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
pr_debug("IA32 perf status is 0x%x, 0x%0x\n", lo, hi);
ratio = (hi >> 8) & 0x1f;
pr_debug("ratio is %d\n", ratio);
if (!ratio) {
pr_err("read a zero ratio, should be incorrect!\n");
pr_err("force tsc ratio to 16 ...\n");
ratio = 16;
}
rdmsr(MSR_FSB_FREQ, lo, hi);
if ((lo & 0x7) == 0x7)
fsb = PENWELL_FSB_FREQ_83SKU;
else
fsb = PENWELL_FSB_FREQ_100SKU;
fast_calibrate = ratio * fsb;
pr_debug("read penwell tsc %lu khz\n", fast_calibrate);
lapic_timer_frequency = fsb * 1000 / HZ;
/* mark tsc clocksource as reliable */
set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
if (fast_calibrate)
return fast_calibrate;
return 0;
}
......@@ -125,13 +105,37 @@ static void __init intel_mid_time_init(void)
static void intel_mid_arch_setup(void)
{
if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27)
__intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_PENWELL;
else {
if (boot_cpu_data.x86 != 6) {
pr_err("Unknown Intel MID CPU (%d:%d), default to Penwell\n",
boot_cpu_data.x86, boot_cpu_data.x86_model);
__intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_PENWELL;
goto out;
}
switch (boot_cpu_data.x86_model) {
case 0x35:
__intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_CLOVERVIEW;
break;
case 0x3C:
case 0x4A:
__intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_TANGIER;
break;
case 0x27:
default:
__intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_PENWELL;
break;
}
if (__intel_mid_cpu_chip < MAX_CPU_OPS(get_intel_mid_ops))
intel_mid_ops = get_intel_mid_ops[__intel_mid_cpu_chip]();
else {
intel_mid_ops = get_intel_mid_ops[INTEL_MID_CPU_CHIP_PENWELL]();
pr_info("ARCH: Uknown SoC, assuming PENWELL!\n");
}
out:
if (intel_mid_ops->arch_setup)
intel_mid_ops->arch_setup();
}
/* MID systems don't have i8042 controller */
......
/*
* intel_mid_weak_decls.h: Weak declarations of intel-mid.c
*
* (C) Copyright 2013 Intel Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; version 2
* of the License.
*/
/* __attribute__((weak)) makes these declarations overridable */
/* For every CPU addition a new get_<cpuname>_ops interface needs
* to be added.
*/
extern void * __cpuinit get_penwell_ops(void) __attribute__((weak));
extern void * __cpuinit get_cloverview_ops(void) __attribute__((weak));
extern void * __init get_tangier_ops(void) __attribute__((weak));
/*
* mfld.c: Intel Medfield platform setup code
*
* (C) Copyright 2013 Intel Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; version 2
* of the License.
*/
#include <linux/init.h>
#include <asm/apic.h>
#include <asm/intel-mid.h>
#include <asm/intel_mid_vrtc.h>
#include "intel_mid_weak_decls.h"
static void penwell_arch_setup(void);
/* penwell arch ops */
static struct intel_mid_ops penwell_ops = {
.arch_setup = penwell_arch_setup,
};
static void mfld_power_off(void)
{
}
static unsigned long __init mfld_calibrate_tsc(void)
{
unsigned long fast_calibrate;
u32 lo, hi, ratio, fsb;
rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
pr_debug("IA32 perf status is 0x%x, 0x%0x\n", lo, hi);
ratio = (hi >> 8) & 0x1f;
pr_debug("ratio is %d\n", ratio);
if (!ratio) {
pr_err("read a zero ratio, should be incorrect!\n");
pr_err("force tsc ratio to 16 ...\n");
ratio = 16;
}
rdmsr(MSR_FSB_FREQ, lo, hi);
if ((lo & 0x7) == 0x7)
fsb = FSB_FREQ_83SKU;
else
fsb = FSB_FREQ_100SKU;
fast_calibrate = ratio * fsb;
pr_debug("read penwell tsc %lu khz\n", fast_calibrate);
lapic_timer_frequency = fsb * 1000 / HZ;
/* mark tsc clocksource as reliable */
set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
if (fast_calibrate)
return fast_calibrate;
return 0;
}
static void __init penwell_arch_setup()
{
x86_platform.calibrate_tsc = mfld_calibrate_tsc;
pm_power_off = mfld_power_off;
}
void * __cpuinit get_penwell_ops()
{
return &penwell_ops;
}
void * __cpuinit get_cloverview_ops()
{
return &penwell_ops;
}
/*
* mrfl.c: Intel Merrifield platform specific setup code
*
* (C) Copyright 2013 Intel Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; version 2
* of the License.
*/
#include <linux/init.h>
#include <asm/apic.h>
#include <asm/intel-mid.h>
#include "intel_mid_weak_decls.h"
static unsigned long __init tangier_calibrate_tsc(void)
{
unsigned long fast_calibrate;
u32 lo, hi, ratio, fsb, bus_freq;
/* *********************** */
/* Compute TSC:Ratio * FSB */
/* *********************** */
/* Compute Ratio */
rdmsr(MSR_PLATFORM_INFO, lo, hi);
pr_debug("IA32 PLATFORM_INFO is 0x%x : %x\n", hi, lo);
ratio = (lo >> 8) & 0xFF;
pr_debug("ratio is %d\n", ratio);
if (!ratio) {
pr_err("Read a zero ratio, force tsc ratio to 4 ...\n");
ratio = 4;
}
/* Compute FSB */
rdmsr(MSR_FSB_FREQ, lo, hi);
pr_debug("Actual FSB frequency detected by SOC 0x%x : %x\n",
hi, lo);
bus_freq = lo & 0x7;
pr_debug("bus_freq = 0x%x\n", bus_freq);
if (bus_freq == 0)
fsb = FSB_FREQ_100SKU;
else if (bus_freq == 1)
fsb = FSB_FREQ_100SKU;
else if (bus_freq == 2)
fsb = FSB_FREQ_133SKU;
else if (bus_freq == 3)
fsb = FSB_FREQ_167SKU;
else if (bus_freq == 4)
fsb = FSB_FREQ_83SKU;
else if (bus_freq == 5)
fsb = FSB_FREQ_400SKU;
else if (bus_freq == 6)
fsb = FSB_FREQ_267SKU;
else if (bus_freq == 7)
fsb = FSB_FREQ_333SKU;
else {
BUG();
pr_err("Invalid bus_freq! Setting to minimal value!\n");
fsb = FSB_FREQ_100SKU;
}
/* TSC = FSB Freq * Resolved HFM Ratio */
fast_calibrate = ratio * fsb;
pr_debug("calculate tangier tsc %lu KHz\n", fast_calibrate);
/* ************************************ */
/* Calculate Local APIC Timer Frequency */
/* ************************************ */
lapic_timer_frequency = (fsb * 1000) / HZ;
pr_debug("Setting lapic_timer_frequency = %d\n",
lapic_timer_frequency);
/* mark tsc clocksource as reliable */
set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
if (fast_calibrate)
return fast_calibrate;
return 0;
}
static void __init tangier_arch_setup(void)
{
x86_platform.calibrate_tsc = tangier_calibrate_tsc;
}
/* tangier arch ops */
static struct intel_mid_ops tangier_ops = {
.arch_setup = tangier_arch_setup,
};
void * __cpuinit get_tangier_ops()
{
return &tangier_ops;
}
......@@ -224,7 +224,7 @@ int get_gpio_by_name(const char *name)
if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN))
return pentry->pin_no;
}
return -1;
return -EINVAL;
}
void __init intel_scu_device_register(struct platform_device *pdev)
......@@ -250,7 +250,7 @@ static void __init intel_scu_spi_device_register(struct spi_board_info *sdev)
sdev->modalias);
return;
}
memcpy(new_dev, sdev, sizeof(*sdev));
*new_dev = *sdev;
spi_devs[spi_next_dev++] = new_dev;
}
......@@ -271,7 +271,7 @@ static void __init intel_scu_i2c_device_register(int bus,
idev->type);
return;
}
memcpy(new_dev, idev, sizeof(*idev));
*new_dev = *idev;
i2c_bus[i2c_next_dev] = bus;
i2c_devs[i2c_next_dev++] = new_dev;
......@@ -337,6 +337,8 @@ static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *pentry,
pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n",
pentry->name, pentry->irq);
pdata = intel_mid_sfi_get_pdata(dev, pentry);
if (IS_ERR(pdata))
return;
pdev = platform_device_alloc(pentry->name, 0);
if (pdev == NULL) {
......@@ -370,6 +372,8 @@ static void __init sfi_handle_spi_dev(struct sfi_device_table_entry *pentry,
spi_info.chip_select);
pdata = intel_mid_sfi_get_pdata(dev, &spi_info);
if (IS_ERR(pdata))
return;
spi_info.platform_data = pdata;
if (dev->delay)
......@@ -395,6 +399,8 @@ static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry,
i2c_info.addr);
pdata = intel_mid_sfi_get_pdata(dev, &i2c_info);
i2c_info.platform_data = pdata;
if (IS_ERR(pdata))
return;
if (dev->delay)
intel_scu_i2c_device_register(pentry->host_num, &i2c_info);
......@@ -443,13 +449,35 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
* so we have to enable them one by one here
*/
ioapic = mp_find_ioapic(irq);
irq_attr.ioapic = ioapic;
irq_attr.ioapic_pin = irq;
irq_attr.trigger = 1;
irq_attr.polarity = 1;
io_apic_set_pci_routing(NULL, irq, &irq_attr);
} else
if (ioapic >= 0) {
irq_attr.ioapic = ioapic;
irq_attr.ioapic_pin = irq;
irq_attr.trigger = 1;
if (intel_mid_identify_cpu() ==
INTEL_MID_CPU_CHIP_TANGIER) {
if (!strncmp(pentry->name,
"r69001-ts-i2c", 13))
/* active low */
irq_attr.polarity = 1;
else if (!strncmp(pentry->name,
"synaptics_3202", 14))
/* active low */
irq_attr.polarity = 1;
else if (irq == 41)
/* fast_int_1 */
irq_attr.polarity = 1;
else
/* active high */
irq_attr.polarity = 0;
} else {
/* PNW and CLV go with active low */
irq_attr.polarity = 1;
}
io_apic_set_pci_routing(NULL, irq, &irq_attr);
}
} else {
irq = 0; /* No irq */
}
dev = get_device_id(pentry->type, pentry->name);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册