提交 44ef4cef 编写于 作者: K Kenji Kaneshige 提交者: Greg Kroah-Hartman

pciehp: cleanup wait command completion

This patch cleans up the code to wait for command completion.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 75e13178
......@@ -173,24 +173,6 @@ static inline struct slot *pciehp_find_slot(struct controller *ctrl, u8 device)
return NULL;
}
static inline int wait_for_ctrl_irq(struct controller *ctrl)
{
DECLARE_WAITQUEUE(wait, current);
add_wait_queue(&ctrl->queue, &wait);
if (!pciehp_poll_mode)
/* Sleep for up to 1 second */
msleep_interruptible(1000);
else
msleep_interruptible(2500);
remove_wait_queue(&ctrl->queue, &wait);
if (signal_pending(current))
return -EINTR;
return 0;
}
struct hpc_ops {
int (*power_on_slot)(struct slot *slot);
int (*power_off_slot)(struct slot *slot);
......
......@@ -374,25 +374,13 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_
pciehp_ctrl_list = ctrl;
}
/* Wait for exclusive access to hardware */
mutex_lock(&ctrl->ctrl_lock);
t_slot->hpc_ops->get_adapter_status(t_slot, &value); /* Check if slot is occupied */
if ((POWER_CTRL(ctrl->ctrlcap)) && !value) {
rc = t_slot->hpc_ops->power_off_slot(t_slot); /* Power off slot if not occupied*/
if (rc) {
/* Done with exclusive hardware access */
mutex_unlock(&ctrl->ctrl_lock);
if (rc)
goto err_out_free_ctrl_slot;
} else
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
}
/* Done with exclusive hardware access */
mutex_unlock(&ctrl->ctrl_lock);
return 0;
err_out_free_ctrl_slot:
......
......@@ -229,35 +229,25 @@ u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl)
static void set_slot_off(struct controller *ctrl, struct slot * pslot)
{
/* Wait for exclusive access to hardware */
mutex_lock(&ctrl->ctrl_lock);
/* turn off slot, turn on Amber LED, turn off Green LED if supported*/
if (POWER_CTRL(ctrl->ctrlcap)) {
if (pslot->hpc_ops->power_off_slot(pslot)) {
err("%s: Issue of Slot Power Off command failed\n", __FUNCTION__);
mutex_unlock(&ctrl->ctrl_lock);
err("%s: Issue of Slot Power Off command failed\n",
__FUNCTION__);
return;
}
wait_for_ctrl_irq (ctrl);
}
if (PWR_LED(ctrl->ctrlcap)) {
if (PWR_LED(ctrl->ctrlcap))
pslot->hpc_ops->green_led_off(pslot);
wait_for_ctrl_irq (ctrl);
}
if (ATTN_LED(ctrl->ctrlcap)) {
if (pslot->hpc_ops->set_attention_status(pslot, 1)) {
err("%s: Issue of Set Attention Led command failed\n", __FUNCTION__);
mutex_unlock(&ctrl->ctrl_lock);
if (ATTN_LED(ctrl->ctrlcap)) {
if (pslot->hpc_ops->set_attention_status(pslot, 1)) {
err("%s: Issue of Set Attention Led command failed\n",
__FUNCTION__);
return;
}
wait_for_ctrl_irq (ctrl);
}
/* Done with exclusive hardware access */
mutex_unlock(&ctrl->ctrl_lock);
}
/**
......@@ -270,7 +260,7 @@ static void set_slot_off(struct controller *ctrl, struct slot * pslot)
static int board_added(struct slot *p_slot)
{
u8 hp_slot;
int rc = 0;
int retval = 0;
struct controller *ctrl = p_slot->ctrl;
hp_slot = p_slot->device - ctrl->slot_device_offset;
......@@ -279,53 +269,38 @@ static int board_added(struct slot *p_slot)
__FUNCTION__, p_slot->device,
ctrl->slot_device_offset, hp_slot);
/* Wait for exclusive access to hardware */
mutex_lock(&ctrl->ctrl_lock);
if (POWER_CTRL(ctrl->ctrlcap)) {
/* Power on slot */
rc = p_slot->hpc_ops->power_on_slot(p_slot);
if (rc) {
mutex_unlock(&ctrl->ctrl_lock);
return -1;
}
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
retval = p_slot->hpc_ops->power_on_slot(p_slot);
if (retval)
return retval;
}
if (PWR_LED(ctrl->ctrlcap)) {
if (PWR_LED(ctrl->ctrlcap))
p_slot->hpc_ops->green_led_blink(p_slot);
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
}
/* Done with exclusive hardware access */
mutex_unlock(&ctrl->ctrl_lock);
/* Wait for ~1 second */
wait_for_ctrl_irq (ctrl);
msleep(1000);
/* Check link training status */
rc = p_slot->hpc_ops->check_lnk_status(ctrl);
if (rc) {
/* Check link training status */
retval = p_slot->hpc_ops->check_lnk_status(ctrl);
if (retval) {
err("%s: Failed to check link status\n", __FUNCTION__);
set_slot_off(ctrl, p_slot);
return rc;
return retval;
}
/* Check for a power fault */
if (p_slot->hpc_ops->query_power_fault(p_slot)) {
dbg("%s: power fault detected\n", __FUNCTION__);
rc = POWER_FAILURE;
retval = POWER_FAILURE;
goto err_exit;
}
rc = pciehp_configure_device(p_slot);
if (rc) {
retval = pciehp_configure_device(p_slot);
if (retval) {
err("Cannot add device 0x%x:%x\n", p_slot->bus,
p_slot->device);
p_slot->device);
goto err_exit;
}
......@@ -334,26 +309,16 @@ static int board_added(struct slot *p_slot)
*/
if (pcie_mch_quirk)
pci_fixup_device(pci_fixup_final, ctrl->pci_dev);
if (PWR_LED(ctrl->ctrlcap)) {
/* Wait for exclusive access to hardware */
mutex_lock(&ctrl->ctrl_lock);
if (PWR_LED(ctrl->ctrlcap))
p_slot->hpc_ops->green_led_on(p_slot);
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
/* Done with exclusive hardware access */
mutex_unlock(&ctrl->ctrl_lock);
}
return 0;
err_exit:
set_slot_off(ctrl, p_slot);
return -1;
return retval;
}
/**
* remove_board - Turns off slot and LED's
*
......@@ -362,44 +327,32 @@ static int remove_board(struct slot *p_slot)
{
u8 device;
u8 hp_slot;
int rc;
int retval = 0;
struct controller *ctrl = p_slot->ctrl;
if (pciehp_unconfigure_device(p_slot))
return 1;
retval = pciehp_unconfigure_device(p_slot);
if (retval)
return retval;
device = p_slot->device;
hp_slot = p_slot->device - ctrl->slot_device_offset;
p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot);
/* Wait for exclusive access to hardware */
mutex_lock(&ctrl->ctrl_lock);
if (POWER_CTRL(ctrl->ctrlcap)) {
/* power off slot */
rc = p_slot->hpc_ops->power_off_slot(p_slot);
if (rc) {
err("%s: Issue of Slot Disable command failed\n", __FUNCTION__);
mutex_unlock(&ctrl->ctrl_lock);
return rc;
retval = p_slot->hpc_ops->power_off_slot(p_slot);
if (retval) {
err("%s: Issue of Slot Disable command failed\n",
__FUNCTION__);
return retval;
}
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
}
if (PWR_LED(ctrl->ctrlcap)) {
if (PWR_LED(ctrl->ctrlcap))
/* turn off Green LED */
p_slot->hpc_ops->green_led_off(p_slot);
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
}
/* Done with exclusive hardware access */
mutex_unlock(&ctrl->ctrl_lock);
return 0;
}
......@@ -444,18 +397,10 @@ static void pciehp_pushbutton_thread(unsigned long slot)
dbg("%s: adding bus:device(%x:%x)\n", __FUNCTION__,
p_slot->bus, p_slot->device);
if (pciehp_enable_slot(p_slot) && PWR_LED(p_slot->ctrl->ctrlcap)) {
/* Wait for exclusive access to hardware */
mutex_lock(&p_slot->ctrl->ctrl_lock);
if (pciehp_enable_slot(p_slot) &&
PWR_LED(p_slot->ctrl->ctrlcap))
p_slot->hpc_ops->green_led_off(p_slot);
/* Wait for the command to complete */
wait_for_ctrl_irq (p_slot->ctrl);
/* Done with exclusive hardware access */
mutex_unlock(&p_slot->ctrl->ctrl_lock);
}
p_slot->state = STATIC_STATE;
}
......@@ -494,18 +439,10 @@ static void pciehp_surprise_rm_thread(unsigned long slot)
dbg("%s: adding bus:device(%x:%x)\n",
__FUNCTION__, p_slot->bus, p_slot->device);
if (pciehp_enable_slot(p_slot) && PWR_LED(p_slot->ctrl->ctrlcap)) {
/* Wait for exclusive access to hardware */
mutex_lock(&p_slot->ctrl->ctrl_lock);
if (pciehp_enable_slot(p_slot) &&
PWR_LED(p_slot->ctrl->ctrlcap))
p_slot->hpc_ops->green_led_off(p_slot);
/* Wait for the command to complete */
wait_for_ctrl_irq (p_slot->ctrl);
/* Done with exclusive hardware access */
mutex_unlock(&p_slot->ctrl->ctrl_lock);
}
p_slot->state = STATIC_STATE;
}
......@@ -616,40 +553,18 @@ static void interrupt_event_handler(struct controller *ctrl)
switch (p_slot->state) {
case BLINKINGOFF_STATE:
/* Wait for exclusive access to hardware */
mutex_lock(&ctrl->ctrl_lock);
if (PWR_LED(ctrl->ctrlcap)) {
if (PWR_LED(ctrl->ctrlcap))
p_slot->hpc_ops->green_led_on(p_slot);
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
}
if (ATTN_LED(ctrl->ctrlcap)) {
p_slot->hpc_ops->set_attention_status(p_slot, 0);
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
}
/* Done with exclusive hardware access */
mutex_unlock(&ctrl->ctrl_lock);
if (ATTN_LED(ctrl->ctrlcap))
p_slot->hpc_ops->set_attention_status(p_slot, 0);
break;
case BLINKINGON_STATE:
/* Wait for exclusive access to hardware */
mutex_lock(&ctrl->ctrl_lock);
if (PWR_LED(ctrl->ctrlcap)) {
if (PWR_LED(ctrl->ctrlcap))
p_slot->hpc_ops->green_led_off(p_slot);
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
}
if (ATTN_LED(ctrl->ctrlcap)){
p_slot->hpc_ops->set_attention_status(p_slot, 0);
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
}
/* Done with exclusive hardware access */
mutex_unlock(&ctrl->ctrl_lock);
if (ATTN_LED(ctrl->ctrlcap))
p_slot->hpc_ops->set_attention_status(p_slot, 0);
break;
default:
warn("Not a valid state\n");
......@@ -676,26 +591,13 @@ static void interrupt_event_handler(struct controller *ctrl)
info("PCI slot #%s - powering on due to button press.\n", slot_name(p_slot));
}
/* Wait for exclusive access to hardware */
mutex_lock(&ctrl->ctrl_lock);
/* blink green LED and turn off amber */
if (PWR_LED(ctrl->ctrlcap)) {
if (PWR_LED(ctrl->ctrlcap))
p_slot->hpc_ops->green_led_blink(p_slot);
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
}
if (ATTN_LED(ctrl->ctrlcap)) {
if (ATTN_LED(ctrl->ctrlcap))
p_slot->hpc_ops->set_attention_status(p_slot, 0);
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
}
/* Done with exclusive hardware access */
mutex_unlock(&ctrl->ctrl_lock);
init_timer(&p_slot->task_event);
p_slot->task_event.expires = jiffies + 5 * HZ; /* 5 second delay */
p_slot->task_event.function = (void (*)(unsigned long)) pushbutton_helper_thread;
......@@ -708,21 +610,11 @@ static void interrupt_event_handler(struct controller *ctrl)
else if (ctrl->event_queue[loop].event_type == INT_POWER_FAULT) {
if (POWER_CTRL(ctrl->ctrlcap)) {
dbg("power fault\n");
/* Wait for exclusive access to hardware */
mutex_lock(&ctrl->ctrl_lock);
if (ATTN_LED(ctrl->ctrlcap)) {
if (ATTN_LED(ctrl->ctrlcap))
p_slot->hpc_ops->set_attention_status(p_slot, 1);
wait_for_ctrl_irq (ctrl);
}
if (PWR_LED(ctrl->ctrlcap)) {
if (PWR_LED(ctrl->ctrlcap))
p_slot->hpc_ops->green_led_off(p_slot);
wait_for_ctrl_irq (ctrl);
}
/* Done with exclusive hardware access */
mutex_unlock(&ctrl->ctrl_lock);
}
}
/***********SURPRISE REMOVAL********************/
......@@ -750,7 +642,6 @@ static void interrupt_event_handler(struct controller *ctrl)
}
}
int pciehp_enable_slot(struct slot *p_slot)
{
u8 getstatus = 0;
......
......@@ -249,6 +249,24 @@ static void start_int_poll_timer(struct controller *ctrl, int sec)
add_timer(&ctrl->poll_timer);
}
static inline int pcie_wait_cmd(struct controller *ctrl)
{
DECLARE_WAITQUEUE(wait, current);
add_wait_queue(&ctrl->queue, &wait);
if (!pciehp_poll_mode)
/* Sleep for up to 1 second */
msleep_interruptible(1000);
else
msleep_interruptible(2500);
remove_wait_queue(&ctrl->queue, &wait);
if (signal_pending(current))
return -EINTR;
return 0;
}
static int pcie_write_cmd(struct slot *slot, u16 cmd)
{
struct controller *ctrl = slot->ctrl;
......@@ -257,24 +275,34 @@ static int pcie_write_cmd(struct slot *slot, u16 cmd)
DBG_ENTER_ROUTINE
mutex_lock(&ctrl->ctrl_lock);
retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (retval) {
err("%s: Cannot read SLOTSTATUS register\n", __FUNCTION__);
return retval;
goto out;
}
if ((slot_status & CMD_COMPLETED) == CMD_COMPLETED ) {
/* After 1 sec and CMD_COMPLETED still not set, just proceed forward to issue
the next command according to spec. Just print out the error message */
dbg("%s : CMD_COMPLETED not clear after 1 sec.\n", __FUNCTION__);
/* After 1 sec and CMD_COMPLETED still not set, just
proceed forward to issue the next command according
to spec. Just print out the error message */
dbg("%s: CMD_COMPLETED not clear after 1 sec.\n",
__FUNCTION__);
}
retval = pciehp_writew(ctrl, SLOTCTRL, (cmd | CMD_CMPL_INTR_ENABLE));
if (retval) {
err("%s: Cannot write to SLOTCTRL register\n", __FUNCTION__);
return retval;
goto out;
}
/*
* Wait for command completion.
*/
retval = pcie_wait_cmd(ctrl);
out:
mutex_unlock(&ctrl->ctrl_lock);
DBG_LEAVE_ROUTINE
return retval;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册