V4L/DVB (7927): ivtv: simplify gpio initialization for XCeive tuners.

Separate gpio_init field and xceive_pin and combine the two when
the gpio is initialized. So there is no longer any need to set the
xceive pin in the gpio_init values, simplifying the creation of a
new card definition.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/video/ivtv/ivtv-cards.c

@@ -923,7 +923,6 @@ static const struct ivtv_card ivtv_card_club3d = {
 		{ IVTV_CARD_INPUT_LINE_IN1,   CX25840_AUDIO_SERIAL },
 	},
 	.radio_input = { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5 },
-	.gpio_init = { .direction = 0x1000, .initial_value = 0x1000 }, /* tuner reset */
 	.xceive_pin = 12,
 	.tuners = {
 		{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
@@ -959,7 +958,7 @@ static const struct ivtv_card ivtv_card_avertv_mce116 = {
 		{ IVTV_CARD_INPUT_LINE_IN1,   CX25840_AUDIO_SERIAL, 1 },
 	},
 	/* enable line-in */
-	.gpio_init = { .direction = 0xe400, .initial_value = 0x4400 },
+	.gpio_init = { .direction = 0xe000, .initial_value = 0x4000 },
 	.xceive_pin = 10,
 	.tuners = {
 		{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
@@ -1102,7 +1101,7 @@ static const struct ivtv_card ivtv_card_aver_m104 = {
 	},
 	.radio_input = { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO_SERIAL, 2 },
 	/* enable line-in + reset tuner */
-	.gpio_init = { .direction = 0xe400, .initial_value = 0x4000 },
+	.gpio_init = { .direction = 0xe000, .initial_value = 0x4000 },
 	.xceive_pin = 10,
 	.tuners = {
 		{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
@@ -1138,7 +1137,6 @@ static const struct ivtv_card ivtv_card_buffalo = {
 		{ IVTV_CARD_INPUT_AUD_TUNER,  CX25840_AUDIO5       },
 		{ IVTV_CARD_INPUT_LINE_IN1,   CX25840_AUDIO_SERIAL },
 	},
-	.gpio_init = { .direction = 0x1000, .initial_value = 0x1000 },
 	.xceive_pin = 12,
 	.tuners = {
 		{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },

drivers/media/video/ivtv/ivtv-gpio.c

@@ -146,15 +146,20 @@ int ivtv_reset_tuner_gpio(void *dev, int cmd, int value)
 
 void ivtv_gpio_init(struct ivtv *itv)
 {
-	if (itv->card->gpio_init.direction == 0)
+	u16 pin = 0;
+
+	if (itv->card->xceive_pin)
+		pin = 1 << itv->card->xceive_pin;
+
+	if ((itv->card->gpio_init.direction | pin) == 0)
 		return;
 
 	IVTV_DEBUG_INFO("GPIO initial dir: %08x out: %08x\n",
 		   read_reg(IVTV_REG_GPIO_DIR), read_reg(IVTV_REG_GPIO_OUT));
 
 	/* init output data then direction */
-	write_reg(itv->card->gpio_init.initial_value, IVTV_REG_GPIO_OUT);
-	write_reg(itv->card->gpio_init.direction, IVTV_REG_GPIO_DIR);
+	write_reg(itv->card->gpio_init.initial_value | pin, IVTV_REG_GPIO_OUT);
+	write_reg(itv->card->gpio_init.direction | pin, IVTV_REG_GPIO_DIR);
 }
 
 static struct v4l2_queryctrl gpio_ctrl_mute = {